Exporting text to Final Cut

How do I export the animated text (only), I created to use in Final Cut Pro? The composition back ground is not transparent.

> How do I export the animated text (only), I created to use in Final Cut Pro? The composition back ground is not transparent.<
Painfully fundamental stuff, all covered it he manual that comes with AE.
Ae is huge. Much more humongousness than FCP even. You've got weeks and months of work to do learning how to use AE so start taking the manual to the gym with you and don't be afraid to open the online nhelp system, lame as it is. Just type in "alpha" and start cruising.
We welcome and encourage posts like yours but, honestly, it's faster and easier for you to look stuff like this up yourself. There is also a high traffic beginning AE forum at the creativecow.net.
bogiesan

Similar Messages

Is it possible to export video from Final Cut X to DSR-PD175 mini DV camera

Hi,
Recently i buy on 27inch iMac with Final Cut Pro X installed.
Also I buy Thunder bolt to firewire adapter & firewire cable from Apple.
Now i am abel to capture my video from DSR-PD175 mini DV camera to FCP X.
How can i export video from Final Cut X to DSR-PD175 mini DV camera?
Please advise....
Thanks & Regds
Abin Thomas K.

II'm afraid not.
Not digitally anyway. Maybe by going to a monitor that has analoh AV output to the camera.
Probably Premiere. Or old FCP7.

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

SSign in to the App Store using the Apple ID that was used to purchase the software.

Exporting files from Final Cut Pro in Snow Leopard

I am using Final Cut Studio 2. I recently upgraded to Snow Leopard. Before the upgrade when I would export files from Final Cut the dialog box would automatically go to the last used folder location. Now, each time it goes to the system hard drive. Is there a way to fix this?
Thanks

Fix what?
Just choose the correct folder to which to export.

Can't Export Video from Final Cut Pro

After updated to OS Maverick, I can no longer export video from Final Cut Pro.
It pops up "The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
ANYONE CAN HELP??

10.0.2, I think this is where the problem is.
I will update to the latest (10.0.9) and update this thread to see if this will resolve my problem.

TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
i need to submit this movie for uni project tomorrow.
any help/advice will help . thanks.

According to Crash Analyzer
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
good luck

Command to Export project as Final Cut Pro XML from jsx script

Hi All,
Can somebody get me the command to export the project as final cut pro xml from jsx script.
I was using the extension builder script earlier for cs6 panel development, so we were using pjct.exportFinalCutProXML("pathname");
Now I am working for panel in Premiere CC so working on HTML 5 panel and qe dom scripting(.jsx).
In some jsx examples i got there is script to export sequence as final cut pro xml but cannot get the code for project export.
project.activeSequence.exportAsFinalCutProXML(entire_out_path);
Also please let me know if there are any kind of reference available about all the functions and properties in the pe dom scripting for premiere pro cc.
I am using premiere pro cc 7.1, windows 7, Eclipse Kepler.
Thanks in advance,
Anoop NR

When you reimport the exported project XML to FCP, do you get the full project or just the single bin/sequence? If you get the full project then it sounds like you need Premiere help, not FCP help ... have you tried asking on the Adobe forums? If you only get the single bin/sequence then it seems you might have inadvertently selected those prior to creating the project export. Try making sure that your FCP Browser window is active and that you have not selected anything within that window prior to using the File > Export > XML command. If that still causes issue then you might try using an earlier FCP XML version.
Hope it helps
Andy

Why they ask me get a compressor from App Store to export video from final cut since I use mavericks

How can I export video from final cut can't do again since I have got maverick

What happens when you have the project active in the timeline and press the Share button?

OMF won't export out of final cut pro.

Exporting a 93min 1920x1080 HD timeline to OMF
5 second handles tried 2 second handles as well.
OMF won't export out of final cut pro. Get error message there is a 2 gb limit.
Final cut 6.0.6
Have deadline. Didn't see it on any forum. Help!! Thanks!!

Seems like a weird thing to not be able to do since it's called final cut PRO...
Bagging on Final Cut Pro for OMF? HA! OMF has been around LONG BEFORE FCP was introduced. It isn't an FCP issue...OMF technology is VERY old. Over 20 years I believe. I used it on Avid...and it always had a 20GB limit.
You cannot deliver 1 track via OMF. You can ask the audio person. I know that Avid now allows you to export an AAF...but FCP doesn't do AAF. For embedded audio I think that OMF is the only way. SO you have to work within the limitations of that format.
Shane

How do I center text in Final cut Pro?

Hi, does anyone know how to directly center text with more than one line of text in Final Cut Pro?
If I have more than one line it doesn't seem to center properly. I've tried wireframe (which is inaccurate), center values (which doesn't work) and Boris 3D (which does the job but the space between letters isn't accurate so I need to try an alternative method).
Any ideas?

In Title 3D you use the Position X/Y button to adjust the height. The spacing between the letters in Title 3D can be adjusted both in tracking and in kerning by placing the cursor between a letter pair. Title 3D is perhaps one of the most accurate and precise text positioning titlers available in any software.

How to up the DPI on exported images from Final Cut

Is there a way to export stills from Final Cut that are 300 DPI, I think they are exporting at 72 DPI?
Catherine

DPI is a measure of density of pixels. It tells us nothing about the printed size of the image (width in inches x height in inches)
A 1200 x 900 image @ 300 dpi yields a 4" x 3" image when printed.
That same size (in pixels) image printed at 100 dpi will yield a 12" x 9" print.
The number of picture elements (pixels) is exactly the same between the two prints but the one in 100dpi image are 3x larger - which will yield a softer image when viewed from the same distance as the 4"x3" 300dpi image.
However, if you view the 300dpi 4"x3" print from 2' away and view the 100dpi 12"x9" print from 6' away - they will appear the same.
Discussions of finding meaning in DPI is difficult without knowing how the final will be viewed.
fwiw - I've made poster size prints at 75 dpi that looked just fine when viewed from 10-12'.
x

Quicktime Export Components in Final Cut Server

Our company has purchased a number of Elgato h264 encoders and we're loving them. They reduce our h264 compression times on average from 15-20 mins down to 2-3 mins. It usually compresses our videos faster than real time. Which as a news organization is great for us. These encoders work great on all our Macbook Pros & Mac Pro systems. I've now installed one onto our final cut server and set up a custom compressor setting. Under the 'encoder' tab the file format had to be set to "Quicktime Export Components" instead of "Quicktime Movie" to use the Elgato. And it works great when I send a single file threw compressor. BUT I can't get this custom preset to show up or work inside Final Cut Server. I have other custom settings that do show up and work (but they are all "Quicktime Movie" file formats). I've rebooted multiple times and looked under multiple Responses transcode settings, but the new one I've created to use the Elgato never shows up.
Is it possible to use Quicktime Export Components in Final Cut Server?
I couldn't find any mention of this in the FCS admin manual or any other posts in the forums regarding this.

I have seen on MediaSilo.com a tip to get Elgato H.264 working with Compressor, but I can't seem to be able to find it. Basically, the trick was to create a duplicate setting in Compressor that Final Cut Server is able to read ( not as Quicktime Export Component), associate it with a Final Cut Server's compression setting and later reassign that setting in Compressor to Elgato.
I will keep diggin' for this tip, it was actually a screen recording.

Flash Video Exporter plugin for FInal Cut Pro

Does anybody know how to install the Flash Video Exporter
plugin for Final Cut Pro so it shows up as an option in FCP?
I want to create FLVs directly from FCP.
Thanks

http://www.adobe.com/devnet/flash/articles/flv_exporter_03.htm
Scroll Down - its about mid page
This is on the intro page:
Note: You must have Flash MX Professional 2004 installed on
your machine to use the Flash Video Exporter with your video
editing application. The only exception is using the exporter in
Demo Mode.

Problems exporting from Text From Final Cut

I'm having some troubles exporting from final cut. I'm trying to export uncompressed full quality version of a short we've finished editing. When I export it as a self contained, quicktime movie, the video looks great but any of the text in the film looks pixelated and bad.
I tried to export using the quicktime conversion option, but whenver I do that I end up with great looking text, but the video doesn't look right. I can't really describe it, but the edges of anything moving look a little off.
I've tried making the text in livetype and importing it, as well as useing the text generators in FCP, but they both yeild the same results when exporting the final product.
Some help please! I want good looking video, and good looking text in my exports!

http://proapptips.com/tips/article.php?story=20050730005147133

Export markers from Final Cut Pro X to DVD Studio Pro

Hello,
After finding out how to create chapters via markers in Final Cut Pro we wonder how to export these markers to DVD Studio Pro without having to create ourselves a .txt file and writing the names and the times of the markers in it to export it to DVD Studio Pro. Isn't there a way to make this happen automatically?
Unfortunately the new version of Final Cut Pro doesn't have an export to Quick Time Player and this is why this kind of solution falls out and we really need to create the markers first in Final Cut Pro and not directly in DVD Studio.
Is there a solution?
Thank you.

At present, you cannot add chapter markers in FCP X.
If you send the project to Compressor, you can add chapter markers there, or you can add them in DVD SP.
You can add the chapter markers in Compressor or DVD SP manually, or if you create a text file listing the exact timecode positions (from FCP X storyline) where you want the chapter markers to be (each on a new line) Compressor (or DVD SP) will automatically insert the markers when you point it to the text file.
Andy

Exporting text to Final Cut

Similar Messages

Maybe you are looking for