Exporting to AOL pictures problem

Hi All,
When I first downloaded aol pictures, there is an option to install a plugin to export from iphoto 08. This used to work until i purchased an hp all in one c4280 and I installed the software from the hp website.
Now when I go to file->export from iphoto, I see the hp software but not the aol. I know the AOL plug in is still installed. Any Idea why i cant export to AOL pictures?
Thanks
Mark

Mark:
It appears that the AOL plugin is not compatible with the Hp one. Try removing the Hp plugin and try again.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

  • INSIGNIA 50" 1080p plasma picture problems

    I purchased a INSIGNIA 50" 1080p plasma HDTV (NS-PDP50HD-09) last year, and it's plagued with this picture problem.  What happens is the picture will split in half down the vertical middle, and the left half will bounce up and down one way, and the right half the opposite way.  It's starting to get worse and worse.  So i called support over a month ago (and it fell and still falls for a week under the 1 year manufacturer's warranty) and best buy sent a 3rd party company to look at it.  Unfortunately they only work during weekdays, and close at around 5, so i had to take days off to have my tv serviced.  I finally got it back, however it's been a week and the problem has resurfaced.  I just called in again, and they said they will resend the company to look at it again.  However, I am becoming frustrated with the situation, because the warranty end date is nearing, and although i was assured that there is a 90 day guaranty on it, i've paid for something is essentially broken.  When it worked properly, i was very satisfied with the TV.  Am i going to be stuck with a 75lb paper weight?  I don't believe this model is manufactured anymore.  Are there any options for me?

    I've got the same exact problem with mine. It only does it when it's in one of the zoom modes. I had a tech check it out and he had fixed the problem but 3 months later the problem started up again.  Now I'm just waiting to hear back from BB on if they're going to fix it or replace it.

  • Cannot Export JPEG still picture from MPEG

    I am trying to use Quicktime Pro 7.1.3 to export a still picture (in JPEG format) from an MPEG video, but this is not working. I followed the directions in the QTPro User Guide: I play and then pause the video once it reaches the desired frame. Then I select FILE->EXPORT and in the "Export" selection box, I select "Movie to Picture". Then I click on the "Options" button, and select the Compression Type of "Photo - JPEG". I must say I am puzzled as to why I then see a ".PCT" extension added to the filename. Also, I don't understand why, in the "Save as" selection field, there is no selection for "JPEG" file extension, and instead there is but a single type available which is called "All Files (.)". It makes me think I am not understanding how to use this function. After I click on the "Save" button, a small popup windows appears, and it shows that a file is written. When I try to open that file (on my local hard drive) with my Firefox browser, I get a plain text message in my Firefox screen which merely names the file. I also tried specifying other compression formats under "Export to Picture", and also tried using Firefox and other programs to open the files written by this Export operation, all without success.
    If I use s different Export operation (Export to BMP instead of Export to Picture), I can get a usable BMP, and I can use another tool to convert this BMP to a JPEG, but the resulting JPEG is only a little over 30k in size, and I believe I am getting a lot lower picture quality than what I might get if QTP could directly Export to a JPEG.
    Here is some info on my environment: I am running Windows XP Home Edition with SP2. Hardware is a Dell Pentium 4 with 2.8GHz cpu, 512MB ram, and over 50GB of free space on the hard drive. I just installed QuickTime Pro 7.1.3 today (and I have already tried de-installing it, and re-installing it, and this did not help).
    Am I mis-understanding the instructions in the User Guide? Can anyone suggest how I can get QTP to Export a still image from an MPEG video directly to a JPEG file? Thanks!

    QT Pro does not export to jpeg or other image formats. Instead, the picture export (Movie to Picture) creates a PICT format file which contains the frame in the specified compression inside the PICT file. PICT is thus a container file format which can contain image in many different compression formats. If you need an actual jpeg format file you will have to export to one of the uncompressed formats and then use some other graphic utility to convert that file to jpeg format.
    Alternately, you can use QT Pro to Copy (Edit menu) the frame to the clip board and then a graphic application to import that frame from the clip board and export it in jpeg format.

  • Export to Excel - Macro problems

    I have moved this to the Discoverer forum. Exporting to Excel - Macro Problems
    Message was edited by:
    user385142

    Hello Denes.
    Excuse me for send you a message in this way , but I dont find other way to contact with you.
    Im using the export_excel_pkg, and really it work good.
    I have only one problem, I tell you.
    When, in one item, data is very long and numeric, by example a EAN code, without any class of format, by default it give me the value ###, Im studing the package and trying to resolve this, but if you can send me any idea it can help me a lot.
    Thanks in advanced.
    You are doing a great work for us.

  • How do I extract still from my videos. The options near the controls includes an option to export frame to pictures, but I click it and nothing happens.

    How do I get a still frame from a video in the new photos app?

    The secret is in the description "Export Frame to Pictures".
    After you click this, look in your top-level "Pictures" folder for the file, such as "Frame-14-04-2015-09-26-59.tiff".
    You can then "Import" this file back into Photos.
    iMac, OS X 10.10.3

  • DLP Picture problem

    Hi,
    All of a sudden I've been getting this.. almost static picture problem. It exists above my tv feed as well as the TV menus and text. You can see it below.It's a 72MX195 if that helps.
    Any ideas?

    Unfortunately if it's on top of the menus as well, it sounds like it likely requires servicing. I'm sorry.
    - Peter

  • How can I export a still picture from a video clip?

    How can I export a still picture from a video clip?

    I'm able to export stills from iMovie without anything extra. I create a new project - call it Exports say. Now, in your event clip with the frames you want as stills, select a single frame and drag it into your project. Repeat for other stills you want to export. Then choose Share -> Export Using QuickTime.
    In the pop-up, choose Movie to Image Sequence. Click Options and choose the image format you want. Playing with the number of stills lets you pick how many stills you want from each second of video. Hit OK and the stills will be generated in the directory you choose.
    I've only done this with HD video. Don't know how well it works with lower res, interlaced vid.
    HTH,
    Tom

  • I am using Aperture 3 and I have just exported the edited picture to my desktop but the image which is now on my desktop appears to be unedited. Does anyone know why??

    I am using Aperture 3 and I have just exported the edited picture to my desktop but the image which is now on my desktop appears to be unedited. Does anyone know why??

    Did you export the master or version? Master will be unedited...
    File > Export > Version

  • Missing Pictures problem

    Missing Pictures problem, I work with Adobe Illustrator CS2 at work & CS3 at home but i have the problem with both. I have a problem with missing pictures from time to time after saving the file & moving the image from original location. I know you have to link the images/files and leave then where the are or you can embeded them. So in my option box i un select the link the files box & i still get the missing files problem, when re-opening the AI file.
    Does anybody know why? Or what I can do to avoid this?
    Thanks

    steve fairbairn wrote:
    Always try to keep your pictures in the same folder as your artwork.
    However you can also make aliases of your pictures and keep them in the folder.
    Aliases are better at tracing their origins than Illy is.
    Steve,
    Could you expand on that a bit please...  the "make aliases of your pictures", i mean...
    TIA,
    JJ

  • HT201210 My itouch screen froze showing "plug to itunes" after trying to update to iOS6. Is there any ways to export all the pictures from it before restoring?

    My itouch screen froze showing "plug to itunes" after trying to update to iOS6. It still can be turned on and off. But the screen froze showing that message. I perhaps need to restore it. But is there any ways to export all the pictures from it before restoring?

    Only if y can get the iPod out of recovery mode with the program. Otherwise you will have to restore via iTunes which erases the iPod.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • Why "Export Error Codec Initialization Problem!" when I export using Adobe Media Encorder for FLV?

    I get "Export Error - Codec Initialization Problem!" when I try to export a project using Adobe Media Encoder as a Macromeida Flash Video.  Premiere Pro 2.0 goes through the rendering process but no file is created; just the Export Error message.  What does this mean, and what do I need to do to export a project as a FLV file?
    Thanks.

    Sounds weird...  You could try the standard fix for general unexplained behaviour in a document; export it to idml, open that, save as an Indesign file and try exporting again.  If that doesn't work try a few different presets, like smallest file size.  If that doesn't work try opening your image in Photoshop, resaving as a psd, placing that (delete your old one) and see if that helps.  Obviously do this on a copy....

  • How to export XY graph picture to clipboard (or file) with labview 6i

    Hello,
    I would like to export XY graph picture to clipboard (or file) to insert it in a word document using labview 6i
    I found example for labview 8 using invokenode but not with labview 6i
    But this invokenode doesn't exist in labview 6i : here's what I found in labview 6i
     Does anyone knows how to use this one ?
    thanks in advance
    Solved!
    Go to Solution.

    I would recommend you use Write PNG File.vi instead of Write JPG File.vi unless the place you are using it cannot handle PNGs.  The PNG will be much better quality and should be about the same size for this type of image.
    Message Edited by DFGray on 02-03-2010 07:22 AM
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • AOL Mail - PROBLEMS with sent mail

    My mail is with AOL. Quite often these days I have trouble using Apple Mail. Wondering if it's AOL's problem or something wrong with my computer, or if it's my cable internet provider (Time Warner Cable - which tests at 20/1.75 Mb/sec)
    Sent messages occasionally take FOREVER to send (regular text - no attachments). The transfer speed goes from very low to zero. The second problem is that occasionally sent messages don't show up in my sent folder. Most of the time it's these messages that take forever that don't show up. They don't show up in my sent folder at aol.com either. As if they never existed. Yet I do know that they are actually being sent and delivered.
    Major frustration.

    Ernie Stamper wrote:
    I have not had any problems using AOL?
    Either had I until today. I got a restricted content message when I attempted to post. I had originally used "aol.com" in my message. I assumed this was the problem, so I removed the ".com". Still got the restricted content message. I tried changing "AOL" to "America Online" and it worked.
    Strange. Seems to be allowing me to post it now. Don't worry about it.
    With the other Sent folder you found, apply Use This Mailbox For and choose Sent. Be sure to first transfer any messages in the one under paper airplane icon to another mailbox it they are not duplicated anywhere else.
    When you do this, all should be well. I think AOL sent out instructions at one point to do just this step.
    Thank you Ernie! This worked! Bravo!

  • Problems with EXIF when exporting portrait style pictures.

    So, I just recently upgraded 09 with the intention of using it to organize my photography work. I didn't work much with 08 and didn't have any photos in it so I don't know if this has always been a problem or not. When I import photos that have been shot vertically, in portrait mode, something is being done to the EXIF data, other than it being rotated. My camera has auto-rotate on and they were originally transfered with the software Canon gives you. Anyways, when I export these photos, whether by dragging tot he desktop or File >> Export, and then open it in another program, such as preview, and attempt to view the EXIF data, it's nonexistent. I should mention that these photos were not edited in any way in iPhoto, just imported and then exported. Also, the EXIF data can be viewed in iPhoto, just not anywhere else apparently.
    I've sort of solved the problem just by trial and error but I still don't know what causes it. When I select these photos and use "Revert to Original", they export perfectly and have all the EXIF data. Also, if I edit the photo somehow, enhance, etc., the EXIF seems to come back when I export. This only seems to affect the photos shot in portrait so I can only imagine it has something to do with how iPhoto deals with the autorotate function on already rotated photos. I decided I would try to import directly to iPhoto rather than import from camera with the Canon software and then import into iPhoto to see if it was the Canon software but the same issue occurs. So, my options at this point are to just select all my photos that I import and revert to original or turn off autorotate on my camera and sift through my photos and manually rotate them. The former isn't a huge deal but it would be a lot more convenient if all my EXIF didn't get erased every time I take a portrait shot in and out of iPhoto. Other than that, I don't seem to see any option to change how photos are imported but maybe I'm missing something obvious.
    I was wondering if anyone else has this issue, or if it was a problem in iPhoto '08. If it matters, my camera is a Rebel XT.

    When iPhoto rotates the auto rotated photos from your Canon the modified file that gets creates loses much of the EXIF data. To get the EXIF data included in the file you have to export the file to the desktop via File->Export->File Export and select the option to include the title and keywords.
    Another way is to turn off the auto-rotate in the camera, upload to the desktop first where you can losslessly rotate those files with PhotoTool CM orXee. Then import into iPhoto. That way no modified file is created and if you drag the photo to the desktop you'll be getting the original file which contains the EXIF data.

  • Exporting Pictures Problem (red exclamation point in XP)

    Wuzzup!
    Whenever I try to download files from my iPhone to my computer (I have XP), the files are followed by a "white exclamation point in a red circle." Files that have been copied/cut/pasted successfully have a "white check mark in green circle."
    Every time I try to download, I get the "red exclamation" marks and then the files disappear after a while.
    All I want to do is backup those photos on my hard drive!
    Your help is greatly appreciated!
    Thanks.
    j

    Hi @theart ,
    I see that you are having issues with the Attention Light flashing on the printer. I would like to help you out today.
    That error indicates that the print-cartridge door is open or other errors exist.
    Did anything happen prior to the flashing light? (paper jam, changed a toner)
    Check for a paper jam. Here is a document for the locations to look for one.
    Attention Light Blinks during a Paper Jam.
    Disregard the title.
    Were you able to print the hardware self test?
    Are you able to rotate the toners with the toner color on the printer pressed?
    If you need further assistance, just let me know.
    How is the printer connected? (USB/Ethernet/Wireless)
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for