Exporting to blu ray and using episode problem

I have a 60 min HDV time line of which I would like to export to Blu Ray ready for the future so I can then delete the master files and clear some space of the main hard drive.
I bought a program by flip 4 mac called Episode Pro which plugs in to compressor and you can use it to export files apparently quicker and better.
Episode has a drop down box with Blu Ray settings for Video and Audio which I choose. so far so good.
When I tell it to export and then bring up the batch monitor it tells me that it take 3 or 4 days and the first try took 3 days and then a message failed came up.
After that I had to reboot because it messed up FCP too
Am I doing something wrong in episode and if I was to use normal compressor for Blu Ray exporting what settings should I use, I only see HD DVD?
Thank you in advance,
Regards
Darren

These are settings for compressor that I use.
I use bootcamp, windows, and DVDitPro HD to burn blu ray disc.
These settings are what DVDitPro likes ( no re-encoding)
Name: blu ray video
Description: No description
File Extension: m2v
Estimated file size: 7.91 GB/hour of source
Type: MPEG-2 video elementary stream
Usage:Blu-ray
Video Encoder
Format: M2V
Width: 1920
Height: 1080
Pixel aspect ratio: Square
Crop: None
Padding: None
Frame rate: 29.97
Frame Controls: Automatically selected: Off
Start timecode from source
Aspect ratio: 16:9
Field dominance: Automatic
Average data rate: 18 (Mbps)
1 Pass VBR enabled
Maximum data rate: 27 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 1/2 second, Structure: IBBP
Name: blu ray audio
Description: No description
File Extension: ac3
Estimated file size: 82.4 MB/hour of source
Audio Encoder
Format: AC3
Sample Rate: 48.000kHz
Channels: 2
Bits Per Sample: 16
Target System: Generic
Data Rate: 192 kbps
Compression Preset: Film Standard
Audio Coding Mode: 2/0 (L, R)
BitStream Mode: Complete Main
Center Mix Level: -3dB
Surround Mix Level: -3dB
Dolby Surround Mode: None
LFE Exists: No
Dialog Normalization: -27 dbFS
Copyright Exists: Yes
Original Content: Yes
Audio Production Information Exists: No
RF Overmodulation Protection: Off
Channel Bandwidth Lowpass Filter: On
DC Highpass Filter: On
LFE Channel Lowpass Filter: On
3dB Attenuation: Off
phase 90: On
Deemphasis: Off

Similar Messages

  • Premiere elements does not recognize Blu-Ray disc, says media not present.  Under 12 I was able to record 3 blu-ray dvds using the same burner and discs I'm trying with 13.  What is the problem?

    I installed PE13 and cannot burn blu-ray DVDs.  I was able to burn 3 blu-ray DVDs using PE12.  When I select DVD from the menu it recogniazes that it is not a stadard DVD as I get an 'incorrect media' error message.  It will burn standard DVDs of the same video using standard DVD mefia.
    What is going  on here?
    When I loaded PE 12 back on the computer I cannot load a file created with PE13.  Looks like a format change?  Can I convert file back to PE12?

    Juergen
    Terrible news. Sorry about that.
    The following is an excerpt from my Premiere Elements 13 blog post, the section on Publish+Share/Disc
    The ISO Image choice is only in Premiere Elements 13.
    DISC. Major Changes Include Burn to offering ISO Image for DVD, Blu-ray, and AVCHD plus 2 new 1080p @ 23.976 presets for Blu-ray.
    The major categories of Publish+Share/Disc/ are DVD, Blu-ray, and Blu-ray. DVD and AVCHD offer burn to disc, folder, and new ISO image. Blu-ray offers burn to disc and new ISO image.Like 12, the new version's DVD, Blu-ray, and AVCHD presets do not have an Advanced Button under which to customize the preset and do not have a "Share Work Area Bar Only" option for selective sharing of the Timeline content Sketch of DVD, Blu-ray, AVCHD includes
    DVD (new features)
    Burn to:
    Disc
    ISO Image (4.7 GB) NEW
    ISO Image (8.5 GB) NEW
    Folder (4.7 GB)
    Folder (8.5 GB)
    Presets
    NTSC_Dolby DVD
    NTSC_Widescreen_Dolby DVD
    PAL_Dolby DVD
    PAL_Widescreen_DVD
    As before in 12, frame rate is 29.97 interlaced frames per second NTSC and 25 interlaced frames per second PAL.
    AVCHD (no changes)
    Burn to:
    Disc
    Folder (4.7 GB)
    Folder (8.5 GB)
    Presets
    H.264 1440 x 1080i NTSC Dolby
    H.264 1440 x 1080i PAL Dolby
    H.264 1440 x 1080p NTSC Dolby
    H.264 1920 x 1080i NTSC Dolby
    H.264 1920 x 1080i PAL Dolby
    H.264 1920 x 1080p NTSC Dolby
    Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
    Blu-ray (new features)
    Burn to:
    Disc
    ISO Image (25 GB) NEW
    ISO Image (50 GB) NEW
    Presets
    H.264 1440 x 1080i NTSC Dolby
    H.264 1440 x 1080i PAL Dolby
    H.264 1440 x 1080p NTSC Dolby NEW
    H.264 1920 x 1080i NTSC Dolby
    H.264 1920 x 1080i PAL Dolby
    H.264 1920 x 1080p NTSC Dolby NEW
    Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
    Look to Burn To: in the Burn Dialog,  and scroll down there to the option that you want.
    Please let me know if this ISO Image choice is going to work for you. But I will keeping searching for the answer to these no media present situations.
    ATR

  • I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro already

    I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro alreadydigial

    I just got a Touch 32GB yesterday and ran into the same problem. I have two PCs in the house that I can sync my iPods on, but I normally use one that DOESN'T have an internet connection, so that the one that does is free for others to use ... a great argument and tension solution, btw.
    Anyway, I hooked up the older "iTunes" PC to the net for a first-time sync with the Touch, and ran into this problem. First it kept detecting the Touch as an unidentified iPhone, then I couldn't sync my classic either. Then I found a post here about how when multiple USB ports running off same USB controller seem to screw with the Touch/iPhone syncing.
    So I disconnected all but 2 of my USB 2.0 slots (the Touch & the Portable HD with my iTunes Library) and now it's working perfectly. I don't know if this will solve your problem, but it might be worth a try.

  • Wich Brands use Apple use for HDDs and RAMS? Whats about Blu-Ray and Players?

    Hard Disks Brands for Example:
    Western Digital, Seagate, Samsung, Hitachi, Maxtor, Corsair, Fujitsu, Plextor, Buffallo,  Iomega, Intenso, Teac, Trekstor, Toshiba, Verbatim, Sandsk ???
    Rams Brands Example:
    Corsair, G-Skill, G.E.IL, OCZ, Kingston, Mushkin, Infineon, HP, LaCie, Verbatim, Sandisk, Sharkoon, Crucial, Extrem Memory, Lenovo, Patriot, Team Group, Transcend, Lenovo, Dolphin, Excelram, Silicon Power ???
    When Apple Blu-Ray will support Mac OS X and and why there are no available? Otherwise I think apple cool even the concept, design and Operating System. Because of that i have to use Windows, BootCamp Parallels. Why thaht? Give us a Blu-Ray Player and supports in Mac Os without those other three thinks. Microsoft an Windows ***** ;-)

    Apple uses a variety of sources for RAM and HD's, even though two machines can have identical specifications they can use different vendors for common products such as RAM and HD's.
    Apple currently does not support Blue-ray and has not announced any plans to do so. Per the terms of use we all agreed to by joining this forum we cannot speculate on future products or speculate on Apple decisions. The terms of use say:
    Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
    Speculations or rumors about unannounced products.
    Discussions of Apple policies or procedures or speculation on Apple decisions.
    Roger

  • Ripple Training Video says I can "Share" (export) to Blu-Ray (PS3)

    I'm successfully exporting HD video from Final Cut Pro 7.0 to MP4 H.264 for streaming on PS3. As you know, this workflow locks up Final Cut Pro until it's done. Then I serve the video using PS3 Media Server.
    I'd prefer to use Compressor to handle this in the background - and with more processor utilization - but I have had no luck getting my PS3 to see the file when it's complete.
    The issue seems to be that Compressor creates mutually exclusive *.264 video as well as an .ac3 audio files which the PS3 does not recognize - nor does Quicktime, MPEG Streamclip, or anything else I've tried.
    Of particular interest is the tutorial listed in the link:
    http://www.rippletraining.com/provideoapps.html
    Click the last Final Cut Pro video "Output to Blu-Ray"
    He mentions his client would like to watch on their PS3 and conveniently skips over how to do that.
    Am I missing a step?
    Thanks in advance.

    Hi. Thank you for taking time to reply.
    Watch the tutorial to see what I mean. Have you tried to create a file for Blu-Ray /PS3 using the "Share..." option in FCP and get it to work?
    What the guy says in the tutorial is "My producers would like to watch this HD show before it's broadcast....since my producers want to watch their episode on their Playstation 3's, let's choose Blu-Ray." Then he goes on a slight tangent and talks about making a Blu-Ray Disc. Each option appears to basically create the h264 and AC3 files. He doesn't mention muxing the two files. That's where I got mixed up. I've figured it out.
    I don't have to use Medialink. I own it but "PS3 Media Server" functionality blows it out of the water. You might like to try it out.
    http://ps3mediaserver.blogspot.com/

  • Settings For HDV to Blu-ray and DVD

    What is the best strategy for avoiding unnecessary rendering and transcoding issues? I edit HDV or AVCHD (from a DataVideo DN-60) in Premiere Pro CS6. I want to output to multiple formats - DVD, Blu-ray and Flash from the same project. I'd like to maximize quality as well to fit project on disk.
    I'd also like to know which format most easily transcodes for my purposes. I typically shoot 23.98 or 29.98 fps 1080p, but sometimes 1080i.
    I assume Dynamic Link is the way to go, but it doesn't look like the resulting settings are automatic. For example, if I go into project settings after Dynamic Linking a PPro sequence, and choose Blu-ray, I would expect the transcode settings to match the imported project. If it does not, then what should I change the default settings to?

    Let me clarify the intent of my original post. I have read in places that it is best to choose export and DVD project settings that match the original footage whenever possible to avoid rendering problems. So, if I shoot and edit HDV or AVCHD footage say at 29.98 fps progressive, then what corresponding settings should I use for DVD and Blu-ray?
    I see that with 29.97 fps the progressive option is not available in the Blu-ray
    presets. Should I not shoot progressive then at 29.97?
    How do I maximize quality of the video while fitting on a single disk? The only way to do it automatically is to Dynamic link, which you advise against. If I manually set exports, then I must calculate all the sequence outputs from Premiere. What then should my priorities be? For starters, MPEG2 Blu-ray or H.264 Blu-ray? What should take precedence, bitrate settings or number of passes?
    I am also considering render/transcode speed. How do the above settings affect speed?

  • Device error to export on Blu-Ray

    In Adobe Elements 4, when i made export to Blu-Ray a device error apear . I repeat the export three times with diferent discs,Verbatim 2xBD-R , Memorex 4xBD-R,and the same problem apear..The computer is a Sony Vaio AR-71S. Please help me...

    No need to say that you already tried to restart application.
    For 'Device error', try whether device working properly with some other application like Window Movie Maker or other app comes with BluRay burner.
    'Device error': try to connect device first and add media to it and than start Premiere Elements
    'Device Error': Insert some bluray dics or movie to bluray burner and check whether window explorer able to read it properly.
    'Device Error': update Blu-ray burner firmware.
    'Device Error': In Premiere Elements, Share, select 'BluRay' not 'DVD' and click on rescan.
    Please try these options and till than let me think some more way to help.

  • Best workflow for burning Blu-ray and DVD

    Hi,
    What's the best workflow for effciency sake for burning both a Blu-ray and a DVD of the same project?
    Essientially I'd like to export and create a menu once, then be able to downrez to DVD. However, I'm not sure that is possible since blu-ray and DVD are differnt codecs.  
    Thank you

    The only way that you can get acceptable re-scaling of menus is to go from BR to DVD, and do the editing in Photoshop.  Simply re-scaling the menu here will not give acceptable results.
    I usually copy the various button layers from the BR menu to a new DVD menu file created using the provided Photoshop preset.  You will still have to do  some manual re-scaling and alignment.  The thing that has given me the most trouble over the years is round button highlights - a segment is often chopped off.  Font sizes will probably need adjusting too.
    Unless you are adept with handling layers and groups within Photoshop, it may be easier to start again.
    Any attempt to convert within Encore is unlikely to produce acceptable menus in my experience.

  • Macbook pro late 2011, completely messed up, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

    Macbook pro late 2011, completely messed up, a macbook pro of this year should not be operating like this, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

    You have a hardware problem. It is probably the hard drive is either to full, not enough free space, or it is starting to fail.
    If you have an external drive connec that to the system and use the Recovery HD, Command + r keys at startup, to install a clean fresh copy of OS X Lion on the external then run the system from that. It will be slower but if you don't get the beachball then that is the sign your internal drive is on its way out or is filled up with files and not enough free space.

  • Output to Blu-Ray and Audio from Gaming videos.

    Just a simple questions, does premiere pro allow output as Blu-Ray. I have a series of home movies, I want to produce as Blue-Ray and all I can find is only DVD publishing.
    On another issue, I am trying to create a video of online gaming that I play and the clan I belong to play to promote the clan, I have some footage from Arma 3, War Thunder, however with my Rust game the audio is very slow. How do I correct this,  Would the video resolution affect the audio. I use Bandicam to capture my online gaming footage which is outputted as AVI file.  This plays well in Windows Media Player, Realplayer, and PowerDirector (Does Blu-Ray 3D).  I have been told by quite a few clan members that premiere pro was a good video editing software so I wanted to try and see for myself seeing I have a complete Creative cloud Subscription.
    Video informations is as follows:
    codec MPEG 1   Resolution: 1912 x1060 @ 30fps
    Audio is MPEG -1 Layer 2 48000Hz @192 kbps Monophonic
    Codecs are installed.
    The audio, almost sound as thought I am speaking in game in slow motions,  I have tried to increase the speed, got as far as 500% which is still too slow.  I am new Premiere Pro.
    It would be greatly appreciated if someone could assist me with this.

    Premiere Pro BY ITSELF will not create DVD or BluRay... you may export files for authoring in EncoreCS6, which is a separate download... go to the bottom of page #5 at The PPro/Encore tutorial list http://forums.adobe.com/message/2276578 for more information on using PProCC with EncoreCS6
    Capturing gameplay is often problematic... try this Free Open Source software http://camstudio.org/ -use with Lossless Lagarith http://forums.adobe.com/thread/875797

  • Export to Blu Ray Folder Adobe Elements 10 MAC

    I´m trying Adobe Premiere Elements 10 for "MAC",
    i haven´t Blu-Ray Burner in MAC.
    When i try to Export a Proyect to Blu-Ray only have
    Option to Write Directly to Blu-Ray Disc (i want to
    export to Folder for after copy and go to my PC
    which have a Blu-Ray Writer.
    I don´t undestand because i can export to DVD Folder
    and not to Blu-ray Folder.
    I have asked to one friend that have Adobe Premiere/Encore
    and he can to Export to Blu Ray Folder.
    How i can to Export to Blu Ray Folder?
    I need some Fix or Update?
    Thanks

    Welcome to the forum.
    Other programs can be used to do what you want, either from inside PrE, or in a stand-alone.
    Now, I do not know what might/might not be available for Mac, and some searching might be required, but users have recommended Phantom Drive, and another utility, with a similar name, that eludes me this AM. Those utilities basically tell PrE that a folder on the HDD is really a BD burner, and then PrE just goes about burning to that, thinking that it is burning to a BD burner. I am sure that something like that exists for the Mac.
    Good luck,
    Hunt

  • Has anyone burned 1080p blu-ray discs using Final Cut Pro alone?

    I am in the market for a new computer. Currently I am a PC user who has burned Blu-Ray discs using Pinnacle. I am dissatisfied with that software because it hangs and crashes at critical moments in the rendering and burn process. I am considering switching to Mac but will only do so if I can burn true Blu-Ray movies which are playable in an ordinary Blu-Ray player.
    I have read some of the discussions on this board and it is not clear to me whether it is yet possible to burn 1080p Blu-Ray discs playable on any Blu-Ray player using Final Cut Pro alone. Can someone confirm for me whether they have done this? Some users have indicated they can only output 720p using Final Cut Pro (which is not very satisfying). Others have indicated it is necessary to use Adobe Encore. If you have to use Adobe Encore to burn, why use Final Cut Pro at all? Why not use Adobe Premier Pro for editing and Encore for burning?

    David S. wrote:
    And yes you can author single track 1080p blu ray discs with Compressor 3.5.
    But that's not what the OP asked, "using FCP alone."
    Why not use Adobe Premier Pro for editing and Encore for burning?
    Well, why not just put CS4 on your PC, especially considering you already have the BD hardware?
    There is no truth to the rumor that applications running on Macintosh are any more stable than the same apps a PC; all systems crash.
    bogiesan

  • I am in need of a new dvd player HD Blu-Ray and best buy is telling me that I need at least 10Mbps.

    Hi Niel, I am in need of a new dvd player HD Blu-Ray and best buy is telling me that I need at least 10Mbps. Where can I find this at my computer before I purchase this item.
    I hope you can help me. I have the 24 inch iMac.
    Denise
    <Subject Edited by Host>

    If you mean Ethernet, your computer already has it. If you're referring to something else, what is it?
    (125558)

  • Workflow for creating one project that can be burned to both Blu-ray and standard DVD?

    Hi,
    I have a 20 minute project and I'm creating a simple single menu with a play button. I'd like to create it once and be able to burn both a 1080p Blu-ray and a standard DVD. Is this possible?
    Thanks

    Hi,
    Let me explain how transcoding works for DVD and Blueray.
    Encore transcodes the files separately for DVD and Blueray and once the transcode is done and status shows transcoded the options for transcoding are greyed out, this means you have already transcoded the file and you cannot transcode again without reverting to original.
    For example you have blueray selected in project settings and you click transcode now from project panel the files will be transcoded for blueray, but after transcoding if for any reason you decide to change the transcode settings and transcode the asset again with different settings you have to revert to original.
    But in this case when you want to transcode the assets for DVD you don’t need to revert to original and loose the transcoding done for blueray. You can change the project settings from blueray to DVD after that you will be able to transcode for DVD without losing the transcoded files for blueray.

  • Alternative to Blu-Ray and HD DVD players?

    I just watched The Keynote presentation for 2008 and saw that there is a new software update that revolutionizes the Apple TV. The first idea that came to mind is the battle between Blu-Ray and HD DVD. With the HD capabilities of the Apple TV now and Dolby Digital 5.1 support, would it be safe to say that, if one wasn't worried about having a hard copy of the HD movie, the Apple TV could be an alternative to the battle of the current generation of formats?
    Could one say that the Apple TV does the same job as these high definition players? Let it be noted that I haven't experienced movie quality in iTunes yet.

    There are 3 separate issues here.
    First, the monitor quality and capability:
    If you have 1920x1080 resolution monitor that can display 1080p (progressive scan), then ATV will be significantly inferior than BRD or HD/DVD player sending 1080p signal natively to full HD monitor. If your monitor is less than that (say 1366x768 or 1280x720 and can handle only 1080i (interlace) or 720p), probably not all that much different than ATV displaying at 720p (which is 1280x720). The only thing is the amount of bitrate (data per/second) that ATV content provides versus BRD or HD/DVD content.
    Second, all BRD and HD/DVD players "upscales" 480i DVD (Stand Def) content to 1080i/p, which can be quite good. I've not been impressed with ATV's ability to upscale 640x480 content (iTune SD content) to large monitors. Also, SD DVDs are actually encoded at over 800x480 for widescreen content these days and bitrate is much higher than 1500 for iTune movies.
    Third issue:
    The audio on ATV HD content is 5.1 whereas DolbyHD and DTS equivalent are 7.1 - which if you have setup your room with 7.1 system (like I have), 5.1 is a bit of a disappointment. Further, SD DVD from iTune store is still DD2.0, and while most receivers can handle that into DD-II/IIx, it is simulated and not discrete sound output. SD DVDs have 5.1, 6.1 and 7.1 depending on content/movie.
    So the long answer to being BRD or HD/DVD player alternative is it depends. One must tradeoff the benefit of a dedicated player in addition to ATV (or MacMini for that matter).
    Certainly cannot debate about the convenience, if one has a decent broadband connection and n/g router setup.

Maybe you are looking for