Exporting to disk leaves "quiet time" at the end

Hi,
When I export the song to disk (Share->Export to Disk) the resulting MP3 file has quiet time (more or less 4 seconds) after the loop music is played.
I need it to end immediately after loop end (so that the sound file will loop properly in another application). Is there any way to fix this?
OR
Is there any way to mark the region that we want to export ?
Thanks

http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

Why is there several minutes of black running time at the end of the videos I am producing in Final Cut Pro 6?

Why is there several minutes of black running time at the end of the videos I am producing in Final Cut Pro 6?

OK, wish you luck over there, seems like somebody over there should be able to help.
If you don't get help, post back here & I'll try to find somebody in the top users that can help.

HT4666 I need to display a timecode window of selected sections of edited FCPX project. I need to be able to start at 00:00:00 and time to the end of the selection. Can I do this with the timecode generator in FCPX ? Thanks for helping.

I need to display a timecode of selected sections in edited FCPX timeline. I need the timecode display to start at 00:00:00 and time to the end of the selection. Can I do this using the timecode generator in FCPX ?
Thanks

FxFactory Pro: Timecode Plugin
Generates a timecode based on the current playback position relative to the duration of the clip.
Full Disclosure: I work for Noise Industries.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I think I goofed when running disk utility, and unmounted at the end and restarted. Now I can't get the disk to mount. What am I missing?

I think I goofed when running disk utility, and unmounted at the end and restarted. Now I can't get the disk to mount. What am I missing?

Which disk won't mount? What version of OS X? Your post is impossible to answer with no useful information.

Is it possible to disable the 128 Octet time at the end of a macrocycle

Every macrocycle has 128 Octets at the end for unscheduled traffic. Is it possible to disable/remove the 128 Octet time at the end of a macrocycle?

Configurator can not disable the 128 Octet time at the end of a macrocycle. This time is reserved for unscheduled communications. In a macrocycle, there must exists certain amount of time for unscheduled communications. Otherwise, abnormal behavior will occur. The random user operations, such as reading parameters, can not be responded.
Feilian (Vince) Shen

HT2584 hi i am unable to download the latest software, i have tried 10 times in the end it just wing save

hi i am unable to to download the software it says i nees Mac 10.7.4 and when i triy saving it doesnt it says it was aborted by the network

Try downloading via Software Update again, this time use the "Show Details" and uncheck, download and install in repeated segments, leaving the largest download for last.
Spread out the downloads over time and during off hours.
Also you have the newest machine, sometimes Apple discovers errors it has made, thus sends out a command to Akamai servers (I'm guessing here) to stop downloads for particular machines, however it's fine to download for other machines.
If after downloading all the other updates you can't download one particular update, give it some time and try again a few days later.
You should run a hardware check on that machine, and if you got a hard drive, perhaps you should consider reinstalling the OS due to a bad factor install, although if you have a slow network this also could be a pain.
Step by Step to fix your Mac

When exporting a .wmv in After Effects 5 the export adds additional black/Blank frames at the end

We are experiencing an issue where we or a client provides us with a video that is a .wmv video, exported from After Effects 5 and it adds almost a second of data less video.
What I mean by data less is the video renders out as WMV, 30FPS, 24 Bitrates (No audio) that is say 7 seconds long within After Effects. The moment it is rendered/exported, it is 8 seconds and shows 8 seconds in any program we import it to. That last second is empty, there is no frames, not even black frames, and when you preview the video in any program, you see the scrub bar, drop about 1 second before the actual end of the timeline.
I opened the video in Camtasia, and you can clearly see that at the end, it shows in the timeline (Video Editor), however there is no actual video.
I import the video in my company’s software, and I move the frame scrubber at the end, it says 'Unable to retrieve the requested video frame.'. If we import it to our software, it sees no frames for that second, and automatically loops and adds the first second of the video to the end.
Typically we only import uncompressed AVIs, but would like to know what this issue is.
Windows 7 Enterprise
64bit OS
After Effects 5

I 100% agree about not being a fan of .WMV. We only recently added .wmv video support to our own program our clients use for importing videos and graphics. Our customer only used .wmv because it was on our list, and we are running into this issue.
Two different users (our own Graphic Artist, and our clients Graphic Artist) and we get the same result. We are 100% certain there is no video framerate mismatch in either of the AE files.
It would be interesting to see if anyone else using AE, if they could make a video few seconds long, export as a WMV and see if another program shows a whole extra second at the end, that has no data.
Thanks for your responses thus far.

How to cut off extra time at the end of a movie

I imported a video about 5 minutes long, then edited it down to 1 minute. There is still about 5 minutes of extra blank space in the timeline and when I render it the space renders as well. I have searched all over the net and I can not figure out how to cut out the extra time off the video. Any suggestions? Thanks

Welcome Dylan Mcintosh to the  iMovie boards..
this is the iMovie '09 section of this board..
.. There is still about 5 minutes of extra blank space in the timeline and ...
there's no 'timeline' in iM vers 09..
click in iM on 'About iM' and tell us, which version you use...

Adding time at the end of a movie

Is there a way to add a couple seconds of black at the end of a movie without having an object on the timeline?

You could try extending the work area, but why not just put a black matte and do the job properly?
If you play out the timeline to tape, a very short black clip at the end will generate permanent black output to tape, so you can avoid longer timelines that way if you wish. But exporting to file needs all frames to be specified.

Why is there several seconds of black running time at the end of the videos I am producing in Final Cut Pro X? There is no gap or effect ant the end of the project.

At the end of some of my projects the cursor runs over the end of the project for app. 3 seconds. When rendering the project Final Cut Pro X adds app. 3 seconds of black to the video. There is no effect or gap or something else at the end of the project.

OK, wish you luck over there, seems like somebody over there should be able to help.
If you don't get help, post back here & I'll try to find somebody in the top users that can help.

Outlook 2007 popups for credentials all the time at the end of creation new profile

Hello all,
I have a new exchange 2013 cu7 for which client role is load balanced. There is no problem creating and working with outlook profiles on Win 7 pc's with outlook 2010.
We have 2 terminal servers with Windows 2003 and Outlook 2007 installed (last patches for office3). When I try to create a new profile, I am asked to enter credentials at the end. Password is correct, but it continues to ask for it. The only way is to choose
cancel, but thus profile will not be created.
OutlookAnywhere settings:
InternalURL exists
Works with SSL
Authentication NTLM
ExternalURL empty
Works with SSL
Authentication NTLM
(Reminder- only these 2 terminal do this problem- they are located in a closed environment- I opened 443 port to exchange client rule servers and client VIP (configured as Internal hostname)).
Any help appreciated!

Try using Set-OutlookProvider and setting the EXCH and EXPR Providers.
Set-OutlookProvider EXCH msstd:<Common Name of Cert>
Set-OutlookProvider EXPR msstd:<Common Name of Cert>
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Have just made 2 attempts to download Elements 12. Each time at the end it gives a message saying Error extracting the product installer (Error 101). Please check for available disk space. I have an almost untouched hard drive. This is definitely NOT

Can anyone help me please

here are two different links. at least one must be different than the one you're currently trying.
Downloads available:
Suite: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
https://helpx.adobe.com/download-install.html
Download and installation help for Adobe links
https://helpx.adobe.com/download-install.htmlDownload and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Premiere Elements reports low disk space error right at the end

Ok, so I wait for 5 hours for a 3 hour long video to get saved to my computer. It goes to 99% and then I get a low disk space error. After I clear up space, and click Ok, it starts all over again. Firstly, why doesn't PrE calculate/predict how much disk space I would need BEFORE starting to save, and secondly why does it at least not resume the saving process after I clear up disk space, instead it starts all over, with my 5 hours wasted?
Some serisous usability issues. Is it just me or do these things drive others crazy too?
Expected more from Adobe...

Unfortunately, as PrE uses a 2-Pass Encoding scheme (helpful to get the best quality within the same file size), it does not know exactly how much space will be used, until well into the second pass - the first is a survey of any motion in the Clips on the Timeline, and the second is the actual Encoding, and writing of a file.
Another consideration, regarding disk usage is whether one is Exporting/Sharing both Audio & Video. If one IS doing a Multiplexed file (with both an Audio and a Video Stream in one file), a Video-only file is written first, and then an Audio-only file, with a few "helper files" to be used in just a moment. Then, when that has completed, PrE reads those helper files, and creates the final, Multiplexed file. Last, the two separate Audio-only and Video-only files are Deleted. That takes some space, as at some point, one will have three large files, though two will be Deleted, along with the little helper files.
How much defragmented, free-space do you have?
What is your I/O setup, i.e. the number of physical HDD's, and how they are allocated?
Good luck,
Hunt

How to increase the time at the end of what aaa requeries the authentication of a client web

Hi All,
I configure ASA aaa to authentificate our internal web client to access to internet. It's check the username/password of client in our Active Directory.
When the client initiate the first connexion, the ASA request the login connexion and when it's correct, it authorise the access. But after 10 min for exemple, it's request again the login, and so one and so one. Approximativelly, after each ten minute, it requeste an username/password.
I want to know how can i increase the time between two authentifcation. Or increase the time of 10 min.
Thanks.

The authentication timeout is configurable via the "timeout uauth" command, and you can set either absolute or inactivity timeout.
Here is the command for your reference:
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/t.html#wp1569874

HT4972 I wanted to download the ios 5.1 for an iphone 4 ... I have tried a number of times at the end of the download some info came up... and said : my firmware is not compatible download can not be completed.

I wanted to download my ipone 4 to the latest update 5.1... while trying i always get this message. you can not download.... cause your firmware is not compatible. what should i do in that case?

Do you have the current iTunes version installed on your computer?

Exporting to disk leaves "quiet time" at the end

Similar Messages

Maybe you are looking for