Exporting to external harddrive "not enough disk space"

imac   Mac OS X (10.3.9)  
I'm having several problems while trying to export my entire iphoto library as a backup to an external harddrive...
The main on is I am getting a "not enough disk space error". There is 95 GB available on the harddrive and the library is approximately 20 GB.
I've been doing it in smaller increments b/c I thought it might be an issue of not enough space on my mac's harddrive as I only have like 6GB left (the reason I'm backing up and deletiing photos) but it gets to a certain point and then says no more.
I've been using the export function, but I've also tried just dragging and dropping them and get the same error.
I'm runnning iphoto 4.0.3.
Of course I've tried restarting to no avail...
Any suggestions would be welcome...
Another issue is the filenames. Of course many have the same names from the camera. Is there a way to get them to automatically put them in folders on the harddrive. I've been doing this manually and it's tiresome.
Finally, is there a way to get it keep the "date created" information. When I look on the harddrive it says they were all created 12/31/1903! That's going to make it very difficult to find something later should I need it...
Thanx so much!
JT

< The library is like 30 GB while the pictures are only 20GB.>
If you have rotated, cropped, or edited any pictures in iPhoto, the originals are all kept inside the iPlibrary in case you want to "revert to the originals"... it's good to know it's there, but you are less likely to revert to an original, since there's a reason you edited the pics in the first place.
Anyway, those originals are taking "wasted space" in your iPlibrary.
If you want to reduce the size of the iPlibrary from 30GB to close to 20GB, (because the thumbnails will remains and must), then you should get rid of the superfluous duplicates! I did.
if you want to clean you iPlibrary and get rid of duplicates, you can use iPhoto diet. Free download.
My advice, is do a drop and copy the entire iPlibrary to the external, as suggested by eww, because imagine a day, when the internal HD iPLibrary crashes on you, and becomes not salvageable, you will have a mirror copy, to copy back to your internal drive, with all it's albums, names, favorites ,star ratings etc....... If you export to the external HD, and if your iP library crashes on you.... you are to re-import from scratch.... and you will go %#%^&$&@$$@#
I have been there myself... now I have 3 differents external HD that I back up to. 9 different iPlibraries, and 3 copies of each on 3 separate HD..... Photos are too important to me.....
Reading this discussion group, you see many people writting thing such as "my library is gone what do I do?"
it's not a matter of if but when!
You be the judge...
Michel

Similar Messages

  • After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive??

    After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive?? 

    Janet.b wrote:
    About 3 years old...pretty dated now I guess.  Am thinking I may just need to have it upgraded by a Mac tech.
    For what the Apple Store's charge you can buy almost buy a new computer.
    Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
    I did the drive replacement myself, got a faster drive of better quality for $300 instead.
    Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
    The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
    So you see what's going on here.
    I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
    They can offer more personalized care which you need. Clone your old drive to the new and everything.
    With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
    For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

  • Not enough disk space on a Windows-formatted External Drive?

    I keep getting 'not enough disk space' message in Tiger when trying to back up my data to an external HD, formatted for windows (I share it with Bootcamp-based windows partition).
    Now, the disk is 100 GIG and I'm only trying to back up 10 GIG. The disk is almost empty, and the disk's trashcan is empty.
    I had same issues with a flashdisk at my father's. It was 2 GIG, and I was copying 500 megs of pictures. OSX kept telling me the disk didn't have enough space! Embarrassed, I had to copy photos in batches of 20. Of course, my Mac was ridiculed thoroughly.
    I appreciate any help!

    Hello,
    Your problems may very well be related to the NTFS file system used by Windows.
    The Mac OS has very limited support for NTFS partitions. It cannot write them at all. And, it only supports reading to a limited extent.
    If you want to be able to read and write Windows formated partitions, you should be using the FAT32 format for your Windows drives. The Mac OS can read and write FAT32 drives without any trouble.
    But, there are some Mac OS files and archives that absolutely cannot be written to a FAT32 drive either. So, you cannot backup your entire Mac OS hard drive to a FAT32 drive.
    The Mac OS "PKG" file type will usually refuse to be written to a FAT32 drive. And, there are a lot of PKG files in the Mac OS installation. And, many of the software update downloads are also in PKG format.
    If you want to backup your entire Mac OS hard drive to another drive, then that drive will also need to be formatted as a Mac OS X Extended volume.
    But, if you are just wanting to share files between a Mac OS X and Windows XP installation, then you can safely use FAT32 for that shared drive / partition.
    I hope this helps.
    As for the comments that you endured, you should have asked him if his PC would even try to read a Mac OS formatted drive / disk. See how much laughing he does then.
    Now, there are special programs that will enable Windows to read Mac OS disks. But, Windows cannot do it on it's own.
    But, that brings us to another option for you. If you wanted to have all your other partitions fully compatible with the Mac OS (as in formatted as Mac OS X partitions), then you could do that. Then, use a program such as MacDrive on your Windows XP installation to enable you to read and write the Mac OS formatted partitions.
    You can read more about that here:
    http://www.mediafour.com/products/macdrive6/bootcamp.asp
    I hope this helps.

  • Has anyone received an error or "there is not enough disk space to complete that operation" when trying to export a photo?  If so, how did you fix it?

    Has anyone received an error message of "there is not enough disk space to complete this operation" when trying to export a photo from iphoto?  If so, how did you resolve it?

    How much free disk do you have? How many and what size of photos do yu have that you are trying to export?
    LN

  • Exporting from iPhoto: "Not enough disk space to complete this operation"

    Hello. I am trying to compile a quick time slide show. There are 72 photos with a total size of 136mb. I get the error "there is not enough disk space to complete this operation" when I try and Export it to my Desktop. Is there a limitation on size to export to Quicktime slide show? I have never noticed this problem before.
    Thanks.

    Greetings--I may have solved this one myself. I knew I had plenty of HD space (92GB) so that wasnt the problem as the error indicated, so:
    1--'poofed' iPhoto icon from the Dock--(don't know what the exact description is, but I removed the iPhoto icon from the Dock and it disappeared in a cloud of poof!).
    2--I ran Disc Utility and repaired the HD.
    3-- I then did a Restart.
    My Export to Quicktime seems to be working okay at the moment with no more error
    message so maybe the HD just needed straightening up. If you dont hear from me on here again, consider the problem solved.
    Cheers.

  • "Not enough disk space" when there seems to be (+ rapid memory consumption)

    [Note: I originally posted this in the iDVD section, but due to an answer I got there to another question and further conversations with my daughter, figured out this is probably an iMovie question?]
    I'm a newbie to iDVD and iMovie and Forums (my last Mac was a Performa 6360--still using it for the family budget). I got my daughter a MacBook as a graduation gift. She is using it to combine movie inputs from a wedding/reception that come from digital camreas and a couple of video cameras. We went to Flip4Mac to get the necessary software/features to import .wmv files (only way we could download one of the video cameras was by going from PC to Mac--can't remember if it was a Sony or Canon).
    Issue: When she tries to import vidoes into iMovie HD 6.0.3 which have already been transferred to her computer, she gets: "The file could not be imported: There is not enough disk space to import Macintosh HD/Users/julie/pictures/iPhoto Library/Originals/2007/Roll8/CIMG1442.AVI" [She says this is about a 4 min. clip.]
    Basically the question is how to get more room on her disk to import and to save? She seems to only be able to Save--she can't Save Project as an option because it says she doesn't have enough disk space (she's already deleted the Trash). Help says you need to have more than 400mb of free space or it gets difficult but the indicator shows 28.8GB free space left...so there seems to be some kind of disconnect?? (Or maybe we're talking apples and oranges?)
    [Even more disturbing, just in the last couple of days with only a little time spent on the computer, the 28.8 GB has dropped to 2.3GB--obviously there is something she is doing that she is not aware of or shouldn't be doing that is consuming memory at a rapid pace.] On top of that, she also gets the same error message when she tries to burn the project onto a disk using iDVD???
    I went through the first 5 pages of the forum and couldn't see a similar problem, but then I may have not known what to look for?
    Any help would be greatly appreciated...she's trying to give the DVD as a Wedding gift--somewhat belated.

    Hello Karstn Schluter,
    This is fm's daughter who is havin ghte difficulites. at the end you tell me to try to answer 1-8 so i will try.
    1- how can you tell if the avi is containing divx? or not?? do I need to just keep this in mind when importing these files
    2- I have not brought in an external drive. I did try making my laptop computer a harddrive so I could import my imovie poject to my eMAC at one point, but it was not allowing me to do that either. Because I had to have it in DVD form or something
    3- No I did not segment the internal drive....sorry How do you do that??? Right now I am trying to find out what is taking up all the memory and Hard Disk Drive space....i do not know how to do that either....Do you know how???
    4-Yes I know flip4mac is for wmv....I guess what that question was emplying was that I also have wmv files that I am trying to import to imovieHD and that is not working either...I can get my avi to get into imovieHD, but not my wmv. files
    5-THank you for the tip with the trash then another question to this one how do you delet projects that are taking up memory that are no longer in use?
    6-Thank you for the tip...so then ignore the not enough disk space.....how can you alter the disk space so that you can save the project under save project as and not just save project?
    7- Sorry my dad was miss informed I cannot import the wmv. files to imovie and I cannot import imovie to iDVD I only have transferred one and then all of the other files are not seen as movies so I can not import them?? Does that make since
    8- When we were useing the Sony Camera originally we could not import the video to the MAC because it did not have the correct firewire cable and it would not been read onto the MAC computer. So, we have to buy the flip4mac equipment so that I would be able ot download the inoformation to the computer by a wmv.file dvd so we are having difficulites trying to import that file.
    I hope these answers clear up the question a little bit more and sorry that your answers brought out more questions. Thank you very much for helping me. I was using a different program in my college class so changing to imovie and idvd has been a huge struggle for me. Thank you once again.

  • Disk permissions/not enough disk space Warnings

    When trying to export tracks, on one system we use, (using an External FW800 1tb HD) with only about 50gb used, after I hit EXPORT on the menu, It tries to write, then I get a disk permissions warning/not enough disk space. ALl the permission on my disk are set to read and write. Anybody?

    sorry for the multiple posts... First two tracks exported fine, then the third track generated the error again. I discovered that track had a / in the track name, which meant the files had a / in the name. Removed the slash by renaming the track. BINGO, problem solved. files on computers can't have / in the file names right... beware of the other characters not allowed.
    Hope this helps someone.
    Steve

  • Clean Install G4 Dual 1 GHz-Not enough Disk Space Error? -SLOW USB copies

    HELP puhleeeeze!
    This seems to be an issue on various sites with no one being able to figure out what is the cause and a solution. One person stated his problem went away with a fullwipe and clean-reinstall of everything. But this is what I did already. 
    What is the reason for the "Not Enough Disk Space" error message when both my hard drives have gigs of space available. If I had hair I'd be pulling it out by now!   When trying to copy a file to my 2 internal hard drives that have a lot of space available, but only by the USB port?!!
    I have a Power Mac G4 Mirrored Door (MDD) Dual 1 GHz with a clean install of 10.5.8 from the Original Mac OS X Leopard DVD. Both internal hard drives are 60GB and 100GB. The hard drives were wiped clean with Disc Utilities and reformatted to Mac OS Extended (Journaled). The Power Mac only has the OS and a few music apps installed. Easily over 30 GB of space left on the the main G4 interal hard drive and about 75 GB on the other internal hard drive.
    The error seems to only happen when I connect a USB flash drive to the USB port. I tried to copy a 50MB update to the desktop-"Not Enough Disk Space" error message happened.
    I know that the G4 MDD Power Macs only have USB 1.0. Is this a USB 2.0 issue? Another issue is that it has very slow USB speed (dramtically slower than normal USB 1.0 copying of files. And this is only when it is successful. Is it a USB format issue? I know I couldn't get an external USB 2.0 drive to mount on the Power Mac at all. Disc Utilities could see it but it still would not mount. I have a friend who has an older G4 single processor Mac that doesn't experience these issues with its USB 1.0 ports.
    Now here's the kicker:
    If I put in a CD disc in the DVD/RW drive, it copies with no problems to either hard drive. If I connect to the Power Mac  via the ethernet network, files can copy with no problems. But any USB connection -  I get a the "Not Enough Disk Space" error message. I know this is an old mac... but it's never been problematic until this latest wipe and update to Leopard 10.5.8.
    Is there a solution to this? Any and all help, feedback, comments, thoughts are greatly appreciated in advance!!!

    Hello everyone,
    Ok, I did the ultimate task. I erased the hard drives, AGAIN. Just to start fresh from scratch. Hard drives were erased. Did a new install of Mac OS 10.5. And all was well. I could copy with no problems. I gave the computer to my friend and all was good for a couple of days and then the issue came back again. He couldn't copy anything to his internal hard drives and we received the "Not enough disk space" error message! I was baffled. A complete hard drive erase 2 times, 2 fresh Mac OS 10.5 installs and it works for a few days and then coping to HD we got the same **** problem again! THEN - I remembered that the PRAM battery was dead on this G4 Mirrored-Door Dual 1GHz PowerMac. I had recommended that he get a new battery, because this computer would always have the incorrect date and time after every restart. So with recalling this, I had him reset the PRAM by holding down the CMD+OPT+P+R keys after a restart (start-up Chime). I had him hold the keys for at least 3 start-up-chimes. Soon as the G4 Power Mac started up everything was fine again. He was able to copy files to his hard drives again with the "Not enough disk space" error message.
    So everyone! Try zapping your PRAM (resetting the PRAM) and see if this solves your problem. I told my friend to get a new PRAM battery to replace the old one that is completely dead. I have not heard back from him.  I will ask him again if the problem has come back.
    If that fails: My only other solution would be to consider that it is possible that Mac OS 10.5 has a conflict or issue with the G4 Processors and maybe it is safer to install Mac OS 10.3 or 10.4. Because this problem only has occured after installing Mac OS 10.5, the highest version of the Mac OS the Dual 1GHz Mirrored-Door G4 can be installed.
    Cheers,
    B

  • Not Enough Disk Space In Target Folder PLEASE HELP!

    I've produced a project with 10 menus and 21 tracks totaling 3.1 gigs and I can not burn it. Each time I get the remark "Not Enough Disk Space In Target Folder." I have 8.8 gigs on my internal harddrive and various externals.
    PLEASE SOMEBODY HELP. I fear I will seriously threaten my job if I can't get this done tomorrow.

    Hi
    Select just Build and check the destination location and set a drive with enough space. Then you can burn using that build.
    I have 8.8 gigs on my internal harddrive and various externals.
    How big is that drive?
    Hope that helps !
      Alberto

  • Project/Library will not relink due to "not enough disk space"

    I have a large library/project that was copied from one drive to another so I could take it to a different site/computer. When I open the project, I need to re-link the footage. FCP finds and verifies all the footage, but when I select "re-link", I get the following error: "There is not enough disk space available at the selected destination. Please choose another one or clear some space."
    I've checked the project properties and they appear to be looking at the right event. The library and all the footage is on a huge drive with almost a terabyte free.
    I'm not sure why I should even need additional space just to re-link to existing footage.
    Thanks in advance for any guidance in this matter.

    You should do this from inside FCP. Only copy libraries from one drive to another in the Finder if you're using managed media, which it doesn't sound as if you are. I'm kind of guessing a little here because I'm not clear on exactly what you did for the media.
    In FCP make a new library on the drive you want to copy to. Select the project and in the inspector assign a location for the media, either managed media or external media in a folder. I like to use managed media for this, because I can always consolidate the media into a separate folder very quickly. Once you've made the new library, inside FCP copy the contents of one library into the new library. When that's done confirm that the media has been copied to the correct location. If necessary run the consolidate function to make sure all the media is correctly located.

  • What does error message when trying to burn DVD from iDVD mean "not enough disk space to burn the remaining assets"

    I created a DVD in idvd and now when trying to burn to DVD using external burner, I get the error message
    "not enough disk space to encode the remaining assets". I am using a brand new blank DVD.
    I have read the help info on computer but hasnt proved helpful.
    Any suggestions?

    iDVD requires a fair amount of disk space to carry out the encoding process; depending on your project, you may need to have over 25 GB free space on your startup hard drive.  How much free space do you have?

  • Not enough disk space to restore from time capsule

    I have a macbook pro, and I think time capsule backed up any eternal drive attached to it.
    The macbook would not boot/? mark, so I repaired/verified disk, got to time capsule and retore, but there is not enough disk space on the macbook to repair (again as I think time capsule backed up external drive which I don't need backed up).
    Is there a way to enter time capsule from the macbook, and "check" something to not restore back onto the macbook, the external drive.
    Thank you
    jonathan golab

    You will have to open the Time Machine HDD and find the file where the external HDD information resides and delete it.  Note for which date you delete the file and use that date for the restore.  Review this extract from the Pondini website;
    http://pondini.org/TM/12.html
    When you enter the Time Machine HDD, you can open the folder like this example.  Probably the best date to choose is the latest one.
    Ciao.

  • Not enough disk space message occurs by installation or CD/DVD burning

    Hi,
    When i want to install a game or burn a movie then i will get the message that there is not enough disk space which is not true because the disk space on my laptop is about 55 Gb and on my external hard drive i have still about 95 GB left.
    Why do i have this problem and what is the solution?
    Greets

    As far as I know some burning applications uses a temporary data folder to copy the files form the CD on the HDD and after successful burning procedure this files will be deleted.
    Mostly such temporary data folder is placed on system partition C.
    I assume you have partitioned you HDD and the space on the C is not enough.
    Change it.

  • There is not enough disk space left to import

    I am in the middle of editing a movie. I have imported two clips and am trying to import a third.
    I have precisely 62.42Gigabytes of hard disk space (I have a 120 Gig HD). The clip I want to import is 1.69 Gigabytes.
    I get the following message:
    Error during Import
    The file could not be imported: There is not enough disk space left to import...
    I tried moving the project to another account on the same computer but that did not work either.
    I have searched through these forums and many others seem to have the same problem but I have yet to find ANY workable solution!
    HELP please!

    The clip I want to import is 1.69 Gigabytes.
    By any chance, is the "clip" a compressed QuickTime movie? If so, when iMovie converts it to DV a 1.69GB movie may expand quite a lot. Please describe the clip.
    And describe the disk the project resides on. Is it an internal disk or external disk?
    Here's some things to check out...
    http://discussions.apple.com/message.jspa?messageID=2920540#2920540
    Karl

  • Not enough disk space available on the proxy

    Wondering if someone might be able to shed some light here.
    Trying to deploy a 16GB flar image, but it fails claiming there is not enough disk space on the proxy, however the proxy appears to have plenty of space in /var:
    The error:
    Task   : Download Image
                    Task Run ID : 23076
                    Target : PC->ocproxy-6c657073
                    Status : FAILED
                    Result : Failed to download image + combo-S10-v149.flar
                    Logs   :
                        05/01/2015 01:47:15 PM PDT INFO Task is posted to the Proxy Controller (ocproxy-6c657073), from the Enterprise Controller. (15011)
                        05/01/2015 01:47:18 PM PDT INFO Task is received by the Proxy Controller. (15012)
                        05/01/2015 01:47:18 PM PDT INFO ---enter into image task run----
                        05/01/2015 01:47:18 PM PDT INFO download image combo-S10-v149.flar:osFlarImage:,jsPostInstall.sh:osScript:,osp_status_firstboot.sh:osScript:,
                        05/01/2015 01:47:53 PM PDT ERROR Not enough disk space available on the proxy to download the file - /var/opt/sun/xvm/proxyImageCache/os/flars/combo-S10-v149.flar.
                        05/01/2015 01:47:53 PM PDT ERROR Image file does not exist - combo-S10-v149.flar.
                        05/01/2015 01:47:53 PM PDT ERROR Failed to download the url - /ImageDownload/FileDownload?fileName=/os/flars/combo-S10-v149.flar.
                        05/01/2015 01:47:53 PM PDT ERROR Failed to download image + combo-S10-v149.flar
    root@ocproxy:/# df -h
    Filesystem             Size   Used  Available Capacity  Mounted on
    rpool/ROOT/solaris-1    98G   3.3G        68G     5%    /
    /devices                 0K     0K         0K     0%    /devices
    /dev                     0K     0K         0K     0%    /dev
    ctfs                     0K     0K         0K     0%    /system/contract
    proc                     0K     0K         0K     0%    /proc
    mnttab                   0K     0K         0K     0%    /etc/mnttab
    swap                   5.5G   1.7M       5.5G     1%    /system/volatile
    objfs                    0K     0K         0K     0%    /system/object
    sharefs                  0K     0K         0K     0%    /etc/dfs/sharetab
    /usr/lib/libc/libc_hwcap1.so.1
                            71G   3.3G        68G     5%    /lib/libc.so.1
    fd                       0K     0K         0K     0%    /dev/fd
    rpool/ROOT/solaris-1/var
                            98G    13G        68G    17%    /var
    swap                   5.5G    96K       5.5G     1%    /tmp
    rpool/VARSHARE          98G   2.6M        68G     1%    /var/share
    rpool/export            98G    35K        68G     1%    /export
    rpool/export/home       98G    45K        68G     1%    /export/home
    Any ideas?
    -J

    Did you format your new drive to MAC OS Extended?
    Al

Maybe you are looking for