Exporting to Flash - Problem with Audio

When importing a Captivate movie into Flash, I'm noticing
that the audio on each slide runs together when the forward/rewind
buttons on the control are pressed. Is this just a bug in the
import/export process, or is there a setting that needs to be
adjusted? Thanks!

Hi Bill_WA and welcome to the community
As there are no specific settings I'm aware of that would
govern this when importing into Flash, my guess is that it's simply
an artifact of importing into Flash.
Wish I had a nifty solution to offer here. Maybe one of the
Flash regulars here can offer up some insight, as I tend to use
Captivate as an applicaiton in its own right and not as a Flash
extension.
Cheers... Rick

Similar Messages

Flash files with audio sound garbled or high pitched

I have finally clarified the sound problem I reported in this
forum.
See below.
TechSmith
Camtasia Studio Support
Flash files with audio sound garbled or high pitched
Question
Flash files played in the the newest version of the Flash
Player sound garbled or have a high-pitched "chipmunk" sound to
them.
Answer
http://techsmith.custhelp.com/cgi-bin/techsmith.cfg/php/enduser/std_adp.php?p_faqid=1250&p _created=1197056770&p_sid=BZo7CNSi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmc F9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MTImcF9wcm9kcz0wJnBfY2F0cz0mcF9wdj0mcF9jdj0mcF9 zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PUZsYXNoIFBsYXllcg**& p_li=&p_topview=1
Flash files with audio sound garbled or high pitched
Question
Flash files played in the the newest version of the Flash
Player sound garbled or have a high-pitched "chipmunk" sound to
them.
Answer
The latest release of the Flash Player (v9.0.115.0 released
on 12/03/07)) causes audio to sound garbled and/or high pitched
like a chipmunk. Our development team is looking into this issue
and working to find a fix.
To avoid this problem, you can roll back your Flash Player to
a previous release. If you have problems installing an older
release of the Flash Player please review this article and contact
Adobe for further support.
At this time, the problem is limited only to SWF files
produced with the MP3 audio codec. As a workaround, you can produce
your SWF files with the PCM audio codec or use the FLV format
instead of SWF.
Adobe Flash Player Support
Reinstalling an earlier version of Adobe Flash Player
Contact Adobe:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402435&sliceId=1
Safe versions security restrictions when installing Flash
Player
Issue
If you previously installed a later version of Flash Player
for Internet Explorer, you may be prevented from installing an
earlier version. For example, if you installed Flash Player
9.0.47.0 and attempted to install version 9.0.45.0 the installation
would fail.
Reason
This issue is due to registry key settings applied by the
Flash Player security model. The restriction is to prevent users
from downgrading Flash Player minor versions. The minor version of
Flash Player is the third set of numbers in the version name. For
example, the minor version for Flash Player 9.0.47.0 would be 47.
If Flash Player 9.0.47.0 was installed and you attempted to install
9.0.45.0 (minor version 45), the installation would fail.
Solution
To resolve this, download the uninstaller for Flash Player
from "How to uninstall the Adobe Flash Player plug-in and ActiveX
control" (TechNote tn_14157).
Select Start.
Select Run.
Type cmd
In the command window, type the following:
uninstall_flash_player.exe /clean
This will remove all entries in the system registry and
resolve this issue.
Note: The uninstall_flash_player.exe file must be saved to
the same directory that the command window is in, for example C:\.
Additional Information
If you are still having trouble installing Flash Player,
please see "Troubleshooting Adobe Flash Player installation for
Windows" (TechNote tn_19166).
TechNote Details
Last Update: 08-16-2007
ID: kb402435
OS: Windows Vista
Windows XP
Browser: Internet Explorer
Permanent Link:
http://www.adobe.com/go/kb402435
Products Affected: Flash Player

Hi,
I doubt it's Safari that's changing the settings:
Why does this happen?
Some third-party audio applications may change your computer's audio output setting. In fact, if you use the third-party application again after applying the above solution, the issue might occur again.
No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4)
iMac G5 20" 2GB RAM, Soundsticks, Netgear 814 ---> Mac OS X (10.4.3)

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

Problem with Audio on HP Envy 6-1130sw (C6F62EA)

Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.

Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Problem with audio configuration

when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
instructions at: http://docs.info.apple.com/article.html?artnum=93698
Thanks giterdone

Problem with Audio MIDI Setup using multiple accounts

I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Two problems with audio clips

Hello,
I'm having two problems with audio clips:
1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
What am I doing wrong?
Thanks.

1. Drag the little hand on speaker icon to drag from
the Viewer...
Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
2. It means your sequence settings don't match the
properties of the source audio you're putting in it,
and you either need to change the settings in the
sequence, or render the audio.
Ah, that would explain it. Thanks!

Premiere pro cc 2014 problems with audio

I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
Anyone else experience the same problems?

Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

Can't run itunes because it has detected a problem with audio configuration

What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

Some people have found the following works:
Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
http://docs.info.apple.com/article.html?artnum=93698
Turn off antivirus/anti spyware
Go to Control Panel>Add/Remove Programs>Change or Remove Programs
Select iTunes, then click on Change, then select Repair.
Restart computer

Problems with Audio in iPhone 5

I Have a iPhone 5 and today beginning having problems with audio, I can't hear my calls or music, somebody have the same problem?...do you know how I can fix it?

Do you have the side switch enabled - do you see orange on the switch above the volume keys.
Make sure all your settings are turned up.
Try a restart of the phone by holding the home and power button until it reboots
If that does not work you can reset your settings by going to settings > general > reset > reset network settings and then reset all settings.

Problems with audio panning.

Am having problems with audio tracks. For example: when capturing a clip where a person is talking, there would be 2 tracks of audio - one a radio mic (Track 1) and another mic (Tack 2)capturing ambient sound. I often delete the ambient track (Track 2) and am left with the the main audio from a radio mic (Track 1).
The problem is when I open up the main audio track (Track 1) and pan the audio track from -1 to 0 or even to +1! It says it has done it but the sound still comes out of the left speaker.
It is a very recent problem that I wonder may be something to do with preferences or settings.
We have had no problems with the speakers at all.
Thanks very much,
Geoff

You have your audio outputs set to 'dual mono', not 'stereo'.... go to:
Sequence>Settings> 'Audio Outputs' tab > then highlight the 'Stereo' button, then click OK...
problem solved...

Problems with audio programs after update to Maverics

After updating to Mavericks on my Mac Mini there is problem with audio programs. I cant open iTunes at all, I click it and it disappear in a second. Also when I press play in GuitarPro 6 or in Vox player nothing happens. It just wont start playing. I really dont like this update.. and my mac is slower now. I cant downgrade my system back so this is really frustrating to me as a musician.

I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
Hope it helps you.

Problem with audio sample rate when exporting

I am having an issue with my audio sample rate. For some reason it is set at 8 khz by defualt when I am exporting. This was not an issue until the latest update (2 weeks ago). I'll try and give all the info I can up front. Also I tried customer support...that was a nightmare.
Ok the issue I am addressing is that the audio sample rate when exporting is at 8khz by default. Which to my knowledge has NO relevant use what so ever. Even when I set the file format to h.264 it insists on resetting to 8khz. Even if I manually set everything look at the render queue and click on output module again it changes the sample rate back to 8 khz automatically which I must adjust again. Why can it not just be set at 48000 like every other adobe product is and like it used to be two weeks ago. Does anybody have an answer?

This problem is addressed by the After Effects CC (12.2.1) bug-fix update, which is now available:
http://adobe.ly/AE_CC_1221
Note the part at the end of that page about a crucial update for the Creative Cloud desktop application, which addresses some severe problems with AME, Premiere Pro, and After Effects.

Problems with audio when exporting to movies

Hi All,
I teach sequencing and one of the projects is to score a short piece of music to film. Logic Pro 9 is great for this (though beat mapping isn't the most friendly of functions) and my students (most only 16-18 years old) have made some great projects.
Right the question is what are the best settings to use when exporting the audio to movie? Some students don't get any sound when bounced or some are getting the oprginal with the new audio (doubled).
To assess and store student work we use vimeo for video projects and the wierdest thing is that when uploaded these bounces (the ones that worked) have no sound at all.
Never had these issues with Logic 8 and just wondering if anyone has any ideas on how I can resolve this?
Thanks and happy new year.

I've used flip4mac for about a year and have had no problems with it. I mostly use it to export preview versions for windoze people. The quality is very good, though it takes significantly longer to export than a similar-quality quicktime movie.

AE CS3: Crashes on export to Adobe Flash Video (with audio)

I have a 10 second comp I'm rendering to Adobe Flash Video. The comp has a wav file on it.
I have ram previewed the comp and it plays back just fine.
When I render it to Adobe Flash Video via the render queue my comp crashes at 30 frames in everytime.
However if I remove the wave file from my comp, AE will fully render the comp to an FLV file.
I have also tried replacing the wav file with another random wav file - I get the same crash everytime at 30 frames in.
I also made a comp from scratch and tried to render it to Adobe Flash Video with a wav clip and it crashes 30 frames in every time.
Please note when it hits frame 30 on the render, a window pops up ( a dos type window ) and then the window closes along with AE right away leaving me with no error messages or even an error log. I was able to get a screen cap of the error and it's attached.
I am running Windows Vista 64-bit and this is the first problem I've had with AE CS3.
Is this a known issue and is there a workaround for this?
-Charley

My apologies, I just found this support page and it helped me fix my problem:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403633
-Charley

Exporting to Flash - Problem with Audio

Similar Messages

Maybe you are looking for