Exporting to m2v using QT

<Just purchased Qt Pro 7.1.5 with plug-in Mpeg 2 player and I can't seem to export my movies to m2v. Also, not able to export to m2v with FCP anymore. Used to be able to do so with QT Pro 6 but this version does not work with the Intel. Any ideas??? Cheers Phili 
MacBookPro Mac OS X (10.4.9) >MacBookPro Mac OS X (10.4.9)
MacBookPro Mac OS X (10.4.9)

Use Toast , set to make DVD and retain the Roxio Converted Files. Set bitrate and pixel detection options and make a disk image - no need to make a real DVD. The Roxio Converted Items folder wil fill with M2V and AC3 audio files. And of course the image will be a DVD with MPEG-2 VOB files you can use if you want muxed output.

Similar Messages

Direct export as m2v vs. export as H.264, then compress to m2v for DVD SP

Hello,
I am wondering what makes a better quality of finished video. If I have HDV video on FCP timeline and want to output it for DVD. What is better? To compress sequence directly into m2v using EXPORT USING COMPRESSOR (DVD Best Quality 90 min)
Or is should I first export as H.264 (using Compressor or QT Conversion) and then bring this H.264 into Compressor and compress it to m2v (using DVD Best Quality 90 min)
Thank you,
Paullie

Paullie
I think the answer is in the first paragraph of the tutorial:
"For quite sometime now, people have been posting to the Discussion boards regarding problems attempting to produce good quality standard definition DVDs when working with HDV video. HDV video does not encode well to MPEG 2. There are two ways that we can work with HDV video and get high quality standard definition DVDs. Both processes involve transcoding from HDV to Apple ProRes 422. The first process happens during capture. The second process can be used if you have already captured HDV video into FCP."
You are dealing with HDV and then need to take some special workflow to get the best quality. If you wearing using even plain DV, the best workflow is direct from DV to MPEG2.
Alberto

Report Title and Text Area issue when exported to pdf using Viewer

Hi there,
We are using OracleBI Discoverer Version 10.1.2.55.26
We have reports that displays Report title containing the following
- Report Title
- Runt Date and Time
- Page No
And text area which displays 'Last Page'
Following properties are set at the worksheet level using page setup
Report Title --> 'Print on every Page'
Text Area --> 'Print on last page'
The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
But when we try to export the same report to pdf from Discoverer viewer, it displays
- Report title on first page only.
- text area on all pages
All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
Please let me know... If you have any questions then please feel free to ask.
Thanks in advance for your help...
Manish

but when opened on other os x machines some text is colored differently than it should be
Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
/hh

Error while trying to export my database using this command

Hi,
I am trying to export my database using this command :
expdp system/manager@db1 full=n schemas=kul4231 dumpfile=kul4231_20091122.dmp logfile=kul4231_20091122.log directory=dump_dir1
Error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-31626: job does not exist
ORA-31637: cannot create job SYS_EXPORT_SCHEMA_05 for user SYSTEM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 600
ORA-39080: failed to create queues "KUPC$C_1_20091122101110" and "" for Data Pump job
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPC$QUE_INT", line 1606
ORA-01008: not all variables bound
DB version : Release 10.2.0.4.0
all ideas are welcomed!!!!!!!!!!!! let me know where am i going wrong!!!!!!!
thanks in advance..!!!!!!!!
venkat.

What is your SGA settings? (especially streams_pool_size).
You can try to bump streams_pool_size to 100M if your current setting is below that.
Regards
Tomasz K.

Error while Exporting in 10G using OEM

Hi everyone,
I am getting a validation error when I am trying to export to files using Oracle Enterprise Manager 10G.
Please advise, it does not seem to give an error code.
Thanks
Faiz
Validation Error
Examine and correct the following errors, then retry the operation:
Error - �
Export: Export Type
---------------------------------------

Have you tried asking in the Enterprise Manager forum? You'll probably have more luck there. In addition please clarify what are you trying to export.
Cheers,
Colin

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

To get own Filed Desc. like ALV Grid while exporting to ALV using standard

Hi all,
How to get the custom field heading when we export to XLS using the standard Functionality/button available in ALV grid to export to spread sheet.
I mean is there anything in ALV field catalog /something by which we can have our custom heading , the way we do in ALV grid output using the button available to do export .
Note: I am not talking about any FM , its the standrad button available in ALV grid by which we can do export to spread sheet , currently its taking the small text of the data element field level.
Regards

Hi,
Modify your fieldcatelog before calling the grid display FM. Remove data element reference (ref_fieldname) and change ddictxt, seltext_s, seltext_m and seltext_l fields to the text you want.
Dataelement texts can be found in table DD04T.
Thanks,
Vinod.

Export to Word using Adobe Acrobat 9 Pro (mac)

I get an error message when I try to export to word using adobe acrobat 9 pro for mac. Any tips?

Hi Bill,
Thanks for replying. The entire message is below. Any ideas?
Acrobat was unable to make this document accessible because of the following error:
Could not convert the document (exception caught).
Please note that some pages of this document may have been changed. Because of this failure, you are advised to not save these changes.

Premiere Pro CC 2014 - AME export back to using only a single core

I've had this problem before (as have others) and it seemed to go away for a while. It's back. Basically the problem is that exports from PP CC 2014 take much longer when sent through AME than if they are done within PP itself. The time problem is the result of AME only using one CPU for the export whereas export within PP uses all 8 (in my case). I've tried all the hints I could find (turn off parking in the registry and make sure the "performance" power option is selected) but nothing works now. Basically I have to avoid AME totally. It doesn't matter what type of output format I've chosen or what effects I have.
My system is an up to date Windows 7 system with 16GB and a CUDA-compatible NVIDIA graphics card. Plenty of hard drives, etc.
I believe this problems been around for quite a while. I don't know what made it come back for me unless it was some recent Adobe or Microsoft patch.

I've a similar system, and renders/exports of any kind never use more than 29% of CPU. Getting frustrated. Got my builder coming to take a peek.

Reg: Export and Import using Dbms_datapump

Hi,
I would like to export a table using dbms_datapump package. I have a procedure to do this (In Oracle 10g R10.2.0.1.0). This procedure have parameter for schema name and table name and this particular schema table should be exported as
dump file.
PROCEDURE PR_EXPORT(PV_SCHEMA IN VARCHAR2,
PV_TABLE VARCHAR2,
PV_STATUS OUT VARCHAR2) AS
l_dp_handle NUMBER;
l_last_job_state VARCHAR2(30) := 'UNDEFINED';
l_job_state VARCHAR2(30) := 'UNDEFINED';
l_sts KU$_STATUS;
l_schema varchar2(256);
l_table varchar2(256);
BEGIN
l_schema := 'IN(''' || PV_SCHEMA || ''')'; --'IN(''VALIDATION'')'
l_table := 'IN(''' || pv_table || ''')'; -- 'IN(''TABLE1'')'
DBMS_OUTPUT .PUT_LINE('SCHEMA ' || L_SCHEMA);
DBMS_OUTPUT .PUT_LINE('TABLE ' || L_TABLE);
l_dp_handle := DBMS_DATAPUMP.open(operation => 'EXPORT',
job_mode => 'TABLE',
remote_link => NULL,
job_name => 'EMP_EXPORT13',
version => 'LATEST');
DBMS_DATAPUMP .add_file(handle => l_dp_handle,
filename => 'SCOTT12.dmp',
directory => 'BACKUP_DIR');
DBMS_DATAPUMP .add_file(handle => l_dp_handle,
filename => 'SCOTT12.log',
directory => 'BACKUP_DIR',
filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_LOG_FILE);
DBMS_DATAPUMP .metadata_filter(handle => l_dp_handle,
name => 'SCHEMA_EXPR',
VALUE => l_schema --'IN(''VALIDATION'')'
DBMS_DATAPUMP .metadata_filter(handle => l_dp_handle,
name => 'NAME_EXPR',
VALUE => l_table -- 'IN(''TABLE1'')'
DBMS_DATAPUMP .start_job(l_dp_handle);
DBMS_DATAPUMP .detach(l_dp_handle);
END PR_EXPORT;
Sometime the above procedure correctly creating the dump file. But sometimes, it is showing the below error:
The following error has occurred:
ORA-26535: %ud byte row cache insufficient for table with rowsize=%ud
Please help me on this.
Thanks and Regards,
Vijay

The only information I could find so far is this [http://ora-26535.ora-code.com/].
I could not find out how to change the buffer size - there does not seem to be an option in [DBMS_DATAPUMP|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_datpmp.htm#i1007277]. Maybe you have to search the [Advanced Replication documentation|http://download.oracle.com/docs/cd/B19306_01/server.102/b14226/toc.htm].
HTH

How to export book pdf using custom presets for all book files in indesign using javascript

How to export book pdf using custom presets for all book files in indesign using javascript.

Hi jackkistens,
Try the below js code.
Note: you can change your preset name in below (e.g, Your preset name).
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "Your preset name", myBook.bookContents, "Book_PDF", false);
example:
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "[High Quality Print]", myBook.bookContents, "Book_PDF", false);
thx,
csm_phil

I cannot get Adobe ExportPDF to work. The screen is blank when I click on Select PDF files to Export. I use windows 7.

I cannot get Adobe ExportPDF to work. The screen is blank when I click on Select PDF files to Export. I use windows 7. I also tried to export a document directly from Adobe Reader using the tool, but it gave me an error message. Any suggestions?

Hi,
Try to use different browser.
Would it be possible for you to send me the document so that i can take a look at my end?
You can email me at:[email protected]
Regards,
Florence

Script to export Security file using maxl script

can anyone provide me the Script to export Security file using maxl script.It should create a log file and a batch file should also be there to schedule the Maxl script.Please help me with this

Hi,
You can use something like
[b]login admin password on localhost;
[b]spool on to 'c:\temp\log.txt';
[b]export security_file to data_file C:\temp\sec_file.txt;
[b]spool off;
[b]logout;
Then you can have a batch file that just calls the maxl script
essmsh name_of_maxl_script.mxl
The batch script can then be scheduled.
Cheers
John
http://john-goodwin.blogspot.com/

Scheduler for Export Table utility using PL/SQL developer Tool

Hi,
Is there any way by which i can schedule manually export tables from a user using PL/SQL developer tool 'Export Tables' utility.
As i have lot many schema a for each i have to manually exporting all tables using this utility.
Please suggest.
Thanks,

Hello,
do you mean PL/SQL developer from Allroundautomation? Then this is the wrong forum.
Do you mean the export feature from SQL Developer, that you can invoke on right click in a result pane? You cannot automate it.
But if you tell us more about your requirements we might be able to find a good solution for you. Yet this is a question for the {forum:id=75} forum. There is a FAQ {message:id=9360007}. This combined with dbms_scheduler or a scheduled job on your computer might solve the problem.
Regards
Marcus

Exporting into Excel Using the Dynpro Binary Cache is not working on NW04s

Hello,
I am using excel data export using the
"Exporting Context Data into Excel Using the Web Dynpro Binary Cache" guide at
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/edc2f3c2-0401-0010-8898-acd5b6a94353">this link</a>.
The tutorial is working on NW04 but when I use it on NW04s I receive errors for the StringBuffer object:
java.lang.NoSuchMethodError: java.lang.StringBuffer.append(Ljava/lang/String;)Ljava/lang/AbstractStringBuilder;
Any ideas?

Hallo Roy,
I have created an updated/enhanced version of this tutorial running on NW 7.0. The new solution allows to open the exported Excel File instantly without opening a popup window befor:
See <a href="https://wiki.sdn.sap.com/wiki/x/0mQ">Exporting Table Data Using On-Demand Streams - SAP NetWeaver 7.0</a>.
NOTE:
Use LinkedHashMap instead of HashMap
private Map getProductColumnInfos() {
 Map columnInfosMap = new LinkedHashMap();
 columnInfosMap.put(IPrivateTableCompBasketView.IProductsElement.QUANTITY, "Quantity");
 columnInfosMap.put(IPrivateTableCompBasketView.IProductsElement.ARTICLE, "Article");
 columnInfosMap.put(IPrivateTableCompBasketView.IProductsElement.COLOR, "Color");
 columnInfosMap.put(IPrivateTableCompBasketView.IProductsElement.PRICE, "Price in EURO");
 columnInfosMap.put(
 IPrivateTableCompBasketView.IProductsElement.TOTAL__PER__ARTICLE,
 "Total Per Article In Euro");
 return columnInfosMap;
This keeps the order of key-displaytext-pairs passed by the client (table component) to the service (excel export component) stable.
Regards, Bertram

Exporting to m2v using QT

Similar Messages

Maybe you are looking for