Exporting to motion from final cut pro

I have a anamorfic DV sequence in final cut pro. When ever I slow down a clip in the sequence or add a video filter and then export to MOtion it sends it without iits effects or speed changes.

yes, that is correct. there is a section in the motion manual devoted to integration with fcp. on page 960 of the pdf manual it states, "When exporting to Motion, Final Cut Pro does not export properties omitted from the
list above, such as filters, generators, and transitions. Time remapping and speed
changes also are not exported."

Similar Messages

  • Cannot export to Compressor from Final Cut Pro 5.1

    This message shows up "A file of this name already existed" when I export to Compressor from final Cut Pro 5.1
    Please help...

    I have almost the same problem. When I export a file directly from Final Cut Pro 5.1, the application crashes. Have you had any answer?
    Please reply.

  • How do I export a project from Final Cut Pro onto my desktop?

    How do I export a project from Final Cut Pro to my desktop as a movie?

    Can anyone please help me.. when I click on my timeline in my project library and try to export movie nothing happens! and when I  try to "share" to youtube I get an error message stating that it cannot be exported because it contains "no video"... The 4 minute music video that I've created with shots off my Canon T2i looks and plays great....If I uploaded the videos into Final Cut but did not save them on my desktop or anywhere else on the Mac would this be a reason to get this message? I have never experienced this before...the only option under "share" that works is "email"
    [email protected]

  • What compression to use when Exporting HD video from final cut pro PAL setting

    Hi there
    I'm trying to export my HD video from Final cut Pro so that I can edit it in DVD studio Pro. I initially exported it on H.264 setting however it then gives me the message 'NTSC assets cannot be imported into PAL projects' It was edited with PAL setting so I think it must be the conversion but i'm not sure which option to use.....been really struggling to get the 1 hour footage under 4.5gb without losing too much quality...
    Any advice greatly appreciated!
    thanks

    Just to add two suggestions.
    1) Consider putting your four movies on two disks.
    2) Bring your movies into Compressor and duplicate the stock DVD setting. In the Encoding pane of the Inspector, select a CBR and dial it back to around 6.2 to 6.5 Mbs. In Preview mark a small section and submit; you'll get 2 elementary streams, with m2v and AC3 extensions. Bring that into DVDSP and evaluate results. Adjust as necessary. (This is to avoid waiting out very long encodes and then having to start again from scratch if you get disappointing results.)
    Russ

  • I can't export my video from final cut pro.

    I'm having trouble exporting anything from final cut pro x because there isn't any share button that I was use to before. It pretty much seems like there are no options seeing as they have simplified it to the point where there are no longer any options. Anyways here is a screen shot of my final cut hopefully someone will be able to help me.

    The Share menu changed in 10.0.6, and is now customizable from the Preferences of FCPX:
    You find the Share menu to the far right in the toolbar, as dastoelk wrote.
    (The screenshoots he posted is missing here, so here you go again)

  • Exporting 'flv' files from Final Cut Pro

    Hi,
    I was wondering if there was such a program that would export
    'flv' files straight from Final Cut Pro time line for my mac. I
    know that you can purchase Adobe Flash which enables this, however
    I don't wish to buy the whole program. Is there a video encoder
    program or something that you can purchase that will enable me to
    export from FCP?

    Bec_ke wrote:
    > Hi,
    >
    > I was wondering if there was such a program that would
    export 'flv' files straight from Final Cut Pro time line for
    my mac. I know that you can purchase Adobe Flash which
    enables this, however I don't wish to buy the whole program. Is
    there a video encoder program or something that you can
    purchase that will enable me to export from FCP?
    Not sure about FCP, tho I would expect the latest Final Cut
    Studio to be able to do
    it.
    Anyway,
    Quick Time Player can export MOV to FLV. Not sure whether
    it's the regular player,
    I'm having the PRO version for many years and this one allow
    that kind of export.
    You being a Mac user, I guess that's the easiest and cheapest
    way to get FLV out of your
    available tools.
    Best Regards
    Urami
    "Never play Leap-Frog with a Unicorn."
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Can't Export Any Videos From Final Cut Pro X?

    Hello all-
    I just downloaded FInal Cut Pro X today, and as I tried exporting my first video to YouTube, I found I had no luck. I am able to select the option to export to YouTube, enter in my account details, edit the video preferences, but when I click submit nothing happens. The little export box just disappears. This happens for every single one of my share options.
    Anyone have any ideas on how to fix this? I'm a little peeved that I just spent 300 dollars on a software that doesn't even let me export the video.
    Thanks much,
    Megan

    Did you open the background task window?

  • Best quicktime export settings - compression - from final cut pro

    i have done this for a while. still don't know.
    to translate an ntsc 24p project onto a dvd, which export settings (compressor)do you use in final cut pro? i use current settings, and once i am done with idvd ("best quality") it just doesn't look high quality. is this an idvd question?
    powermac g5 2.7 ghz dual   Mac OS X (10.4)   2.5 gb ram

    I didn't know iDVD could handle 24fps project. Or is it a 29.97 (23.98 with a pulldown).
    Best quality in iDVD just means that it works on it longer to compress it more to fit more on disk. Have you tried Best Speed version?
    Patrick

  • How to export flv file from Final Cut Pro?

    I'm using Final Cut Pro and try to export edited video in "Flv" format. However, there is no such choice and only "Flc" available? My friend has the same version of Final Cut Pro and there is "Flv" format to choice, why?

    I use QT conversion: file > Export > Using QuickTime Conversion >
    Then, under Format I only have "3G, AIFF, FLC, iPod, QuickTime Movie...", no "Flash video (FLV)" as my friend's computer?

  • Exporting Canon XHA1 from final cut pro?

    I have a problem with my export. my footage plays fine in my browser when playing on final cut pro (before export). i have been exporting for YOU TUBE as a quick time conversion (mp2 & mp4) but when i play it back the footage cant keep up with the sound. the quality is ok (could be better) but the footage jumps.
    i imported on sequence preset 1080i50. is this correct or can someone suggest something else.
    im not sure what the best settings are if someone could please help. i want the footage to keep its quality but it also has to be compatible with you tube.
    thanks

    ok, your description is a little confused. What version of FCS are you using? In 3 the Share to YouTube works just fine. Are you trying to export a 1920x1080 image? If so that might be an issue. I note that you're running a G5. It might be time to move that forward a little bit.

  • How to export a movie from Final Cut Pro X?

    Hi There,
    I've been away from FCP for a while using Premier but I have an FCPX project that I need to export a preview from.
    I've tried "Sharing" a YouTube movie but it wants an account so I tried using "Apple Devices 1080p". But I get no dialogue to save it and no feedback that anything is happening - nor do I know where FCPX actually saved it (assuming it exported it).
    I also tried adding a new sharing destination but none of the destination options make sense - rather I didn't see anything I wanted to share to (DVD, BluRay etc).
    I'm currently downloading the PDF manual but this seems like such a basic thing to want to do that I'm pretty sure I'm missing something simple - so thought I'd post here.
    Put simply, how do I export a preview file to my desktop?

    Or just export an H.264, which PC's can play back just fine, especially via the web.  I've never had issues with my clients.
    http://www.macprovideo.com/hub/final-cut/preparing-video-web-quicktime-compresso r
    You can do H.264 direcly out of FCP X without going to compressor.  You'll need to purchase "Flip4Mac" to export WMV files, which I rarely have to use for my PC clients.  You can create a Bundle in your Share preferences to do it all in one operation, too.

  • Export a file from Final Cut Pro for friend in Soundtrack Pro

    I have a video artist who I am helping with audio. At first we just used an omf file that worked great, it's just a pain to get all the levels/automation reset. Is there an easy way to do this with Final Cut to Soundtrack Pro? Thanks a million

    Final Cut Pro has an OMF export function: File > Export > Audio to OMF.
    There is also: File > Export > For Soundtrack
    and: File > Send To > Soundtrack Pro Multitrack Project.

  • Can I export a project from Final Cut Pro X to FCE?

    Hello All,
    I have the most current version of FCE and I am about to purchase FCPX.  It looks like FCPX won't export to tape so that is why I want to export it to FCE and then to tape.  Can this be done?
    Thanks,
    Mike

    You can export a QuickTime Movie from FCPX. Take to movie to FCE and print to video from there.

  • Problem Exporting to OMF from Final Cut Pro

    Hello
    I'm trying to export several audio tracks in a full length project to OMF, but no matter how short I set the in and out points or how few of the clips I select, or how many of the audio tracks I mute, I always get the same message, claiming that the resulting file would be larger than 2GB, which I realise is not currently supported. The fact that even trying to run a test with just four audio tracks over 3 minutes or so is impossible makes me think that there is either something  I or the software is doing wrong.
    Has anybody experienced similar problems?
    Any help/pointers gratefully appreciated!
    Thanks
    Sebastian

    You might want to check out Automatic Duck's plug in which will allow you to output an omf linked to external media.  Very, very useful and worth every penny.  Most sound designers want extensive handles which makes omf's with embedded media hit that 2gig limit.

  • Exporting a .wmv from Final Cut Pro

    When I export a Windows Media File it only exports a portion of the file. Everything else(.mov, aiff, etc.) exports in full. What am I doing wrong?

    You only have the demo version of Flip4Mac. Purchase the full version.

Maybe you are looking for

  • Can anyone tell me if the Hard Drive in my macbook6.1 is compatible with my daughter's macbook3.1.

    I need to upgrade my hard drive in my macbook6.1 will the current drive work in my daughter's macbook3.1 would increase capacity on both computers with one purchase (I hope). Thanks

  • Changing airtunes name after Airport Express name change

    I'm running 7.0.1 and an Airport network. Last night I changed my Airport Express name, having moved the express to a different room. When I start iTunes, it still has the old Express name in the list. I can't seem to find a way to have it reset its

  • Special character error

    HI, we are facing problem during ODS activation, it is a kinda of special character error, i maintained almost all characters in RSKC, rsallowedchar table is reflecting the same, but still it is throwing special character error, that special characte

  • Linux 5 64 bit ODBC connectivity with MS SQL Server

    Dear All, Env. Oracle EBS R12 – DB 10gR2 64bit on Redhat linux 5.4 64bit We want to connect OracleDB10gR2 64bit to MS sql Server 2000 on Windows 2003. Is there any ODBC driver is available for Linux 64 bit Regards

  • Apply Group Policy to external clients

    Is it possible to apply GPO's to clients on external networks such as their own personal networks. I'm looking at solutions such as authenticating them through a proxy on the perimeter network and are pushed to the Domain Controller to force these po