Exporting to .mpg with multiplexing ... keeps setting to "none"

Folks,
I need a single file with audio & video into 1. It needs to be an mpg.
At this moment, all I get from Premiere Elements (8) is an .m2v file and an .mpa
I read that I need to set multiplexing to something other than "none" for them to merge.
But here's the problem ... I set it to mpeg or dvd and save the preset and export the movie .. I still get 2 files.
If I go back to check the preset, the multiplexing has jumped back to "none".
What is wrong ?! This is driving me nuts !!

Just tried SVCD and get an export error now:
freely translated: "The total video- and audio-bit-speed excedes the maximum."
If I select for audio MPEG and set it to mono 128kbps it keeps the multiplexer at TS and exports a single file with .m2t extention ... but doesn't play any sound when I play the file :/
I'm trying all sorts of settings now and sometimes get a single .mpg file ... but I hear no audio in it :/ (combined stereo or something)
PS: I need a single .mpg file to put on an SD card which goos into a small LCD tv and hangs in a shop looping the film over & over ... and last time I had such an LCD here, the only file that would play on it was an MPG2 with muxed audio. I remember merging the audio and video with a trail payware program back then ... but the trail period is long over and I just think it crazy paying 100+$ for a software if I already have PremElements .............

Similar Messages

Do I get encryption with transport-guarantee set to NONE over HTTPS?

Hello,
If I established HTTPS connection and then access some web resource which either
does not have <user-data-constraint> or has <transport-guarantee> set to NONE. Do
I still have my communication encrypted? I read Servlet spec 2.3, but does not find
it explicitly talking about this. Any pointers? Or this become implementation dependent.
I'm thinking WLS 6.1/7.0 and maybe Tomcat.
TIA
chuck

Yes, it will still be encrypted, with whatever usual encryption parameters
your
HTTPS connection has. NONE means integrity or confidentialy isn't required
for that resource, but it doesn't prevent you from applying them.
regards,
-Ade
"Chuck Zheng" <[email protected]> wrote in message
news:3d2b594e$[email protected]..
>
Hello,
If I established HTTPS connection and then access some web resource whicheither
does not have <user-data-constraint> or has <transport-guarantee> set toNONE. Do
I still have my communication encrypted? I read Servlet spec 2.3, but doesnot find
it explicitly talking about this. Any pointers? Or this becomeimplementation dependent.
I'm thinking WLS 6.1/7.0 and maybe Tomcat.
TIA
chuck

Adf Table with selection as set to NONE

Hi,
I having a scenario as explained below:
I am populating records in to the adf Table
After that I am using checkbox for selecting multiple records in the table and delete them.
So I set selection property to None for the table. Because I want user to edit only that record which is checked.
My multiple delete is working fine.
Now if i selected one checkbox and and click on edit(which I have placed in the panal collection toolbar) it should show me the record in the which I have selected by check box. But it is showing me the first row.
Can anybody help me to set the current row of the adf table manually which is having selection property as none. so that I can populate in popup.
If some other way is available please explain.
I am using jdeveloper 11.1.2.1
Thanks,
Sandeep.

I don't see why you can't set selection property to "single"? (and don't forget to restore table SelectionListener property - if deleted)
This will set current row when you click on it.
If you programmatically iterate through RowSet to find rows with selected checkbox, this will work regardless of value in "selection" property.
Dario
Edited by: kdario on Nov 7, 2012 5:20 AM
Edited by: kdario on Nov 7, 2012 5:22 AM

How to take data dump(export) with given language set on oracle 9i database(production server) ?

Hi,
I am taken data dump on oracle 9i machine and ported (imported ) oracle 10g (production machine) ,But it will showing error : language set error,
Could you tell me how to take data dump with language set.
Regards,
Suva

Hi PaulM,
     Please follows the details,
Development server ,It is 9i machine (I am export in this machine) and Imported on Production Server ( It is Oracle 10 g).
    When import on production server error is coming, Tis error log adding below.
Production Databse (Language details)
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET UTF8
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET UTF8
NLS_RDBMS_VERSION 10.2.0.1.0
Development Database Language details Details.
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET UTF8
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET UTF8
NLS_RDBMS_VERSION 10.2.0.1.0
Log file
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
import done in WE8MSWIN1252 character set and UTF8 NCHAR character set
import server uses UTF8 character set (possible charset conversion)
export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
. importing JW_OR's objects into JW_OR
. importing JW_OS's objects into JW_OS
. importing JW_ADMIN's objects into JW_ADMIN
. importing JW_OR's objects into JW_OR
. . importing table                      "ACCRXNS"     234671 rows imported
. . importing table                  "AUTHORLINKS"     790450 rows imported
. . importing table                      "AUTHORS"      79500 rows imported
. . importing table                       "CATSOL"      25505 rows imported
. . importing table               "CATSOLSYNONYMS"      80045 rows imported
. . importing table                "CHAPTERTITLES"        133 rows imported
. . importing table                "COMPOUNDLINKS"     601785 rows imported
. . importing table                   "CONDITIONS"     207445 rows imported
. . importing table                     "JOURNALS"       2327 rows imported
. . importing table                     "LANGUAGE"          0 rows imported
. . importing table                     "MAINDATA"     234659 rows imported
. . importing table                      "MOLDATA"     721174 rows imported
. . importing table                   "PLAN_TABLE"          1 rows imported
. . importing table                   "REFERENCES"     276783 rows imported
. . importing table                        "ROLES"          2 rows imported
. . importing table                  "RXNKEYLINKS"    1724404 rows imported
. . importing table                  "RXNKEYWORDS"        848 rows imported
. . importing table                  "TABLETITLES"       2400 rows imported
. . importing table                   "TEMP_TABLE"     165728 rows imported
. . importing table          "TEMP_WILEY_MAINDATA"     155728 rows imported
. . importing table           "TEMP_WILEY_PDF_MAP"      16672 rows imported
. . importing table      "TEMP_WILEY_YEAR_VOL_MAP"         42 rows imported
. . importing table                  "WEX_ACCRXNS"       3465 rows imported
. . importing table              "WEX_AUTHORLINKS"      14183 rows imported
. . importing table                  "WEX_AUTHORS"      79500 rows imported
. . importing table            "WEX_CHAPTERTITLES"        133 rows imported
. . importing table            "WEX_COMPOUNDLINKS"      10925 rows imported
. . importing table               "WEX_CONDITIONS"       5297 rows imported
. . importing table                 "WEX_JOURNALS"       2327 rows imported
. . importing table                 "WEX_LANGUAGE"          0 rows imported
. . importing table                 "WEX_MAINDATA"       3465 rows imported
. . importing table                  "WEX_MOLDATA"      10358 rows imported
. . importing table               "WEX_REFERENCES"       3795 rows imported
. . importing table              "WEX_RXNKEYLINKS"      34540 rows imported
. . importing table              "WEX_RXNKEYWORDS"        848 rows imported
. . importing table              "WEX_TABLETITLES"       2400 rows imported
. . importing table           "WEX_WILEY_HTML_MAP"      17316 rows imported
. . importing table           "WEX_WILEY_MAINDATA"       3465 rows imported
. . importing table            "WEX_WILEY_PDF_MAP"      23925 rows imported
. . importing table       "WEX_WILEY_YEAR_VOL_MAP"         58 rows imported
. . importing table               "WILEY_HTML_MAP"      17316 rows imported
. . importing table               "WILEY_MAINDATA"     234659 rows imported
. . importing table                "WILEY_PDF_MAP"      23925 rows imported
. . importing table           "WILEY_YEAR_VOL_MAP"         58 rows imported
. importing JW_OS's objects into JW_OS
. . importing table                      "ACCRXNS"       7116 rows imported
. . importing table                   "ATMOSPHERE"         47 rows imported
. . importing table                  "AUTHORLINKS"      33276 rows imported
. . importing table                      "AUTHORS"       6555 rows imported
. . importing table                       "CATSOL"       1463 rows imported
. . importing table               "CATSOLSYNONYMS"       9370 rows imported
. . importing table                    "CHEMICALS"      78197 rows imported
. . importing table                "COMPOUNDLINKS"      20799 rows imported
. . importing table                       "EXPDET"          1 rows imported
. . importing table                    "FOOTNOTES"      77825 rows imported
. . importing table                     "JOURNALS"          2 rows imported
. . importing table                     "LANGUAGE"          2 rows imported
. . importing table                     "MAINDATA"       7116 rows imported
. . importing table                     "PATHSTEP"       7199 rows imported
. . importing table               "PROCEDURENOTES"      77293 rows imported
. . importing table                        "ROLES"          2 rows imported
. . importing table                  "RXNKEYLINKS"      23096 rows imported
. . importing table                  "RXNKEYWORDS"       1272 rows imported
. . importing table                  "WEX_ACCRXNS"        135 rows imported
. . importing table               "WEX_ATMOSPHERE"         47 rows imported
. . importing table              "WEX_AUTHORLINKS"        613 rows imported
. . importing table                  "WEX_AUTHORS"       6555 rows imported
. . importing table                "WEX_CHEMICALS"          0 rows imported
. . importing table            "WEX_COMPOUNDLINKS"        497 rows imported
. . importing table                   "WEX_EXPDET"          1 rows imported
. . importing table                "WEX_FOOTNOTES"       2184 rows imported
. . importing table                 "WEX_JOURNALS"          2 rows imported
. . importing table                 "WEX_LANGUAGE"          2 rows imported
. . importing table                 "WEX_MAINDATA"        135 rows imported
. . importing table                 "WEX_PATHSTEP"        135 rows imported
. . importing table           "WEX_PROCEDURENOTES"       2253 rows imported
. . importing table              "WEX_RXNKEYLINKS"        695 rows imported
. . importing table              "WEX_RXNKEYWORDS"       1272 rows imported
. importing JW_ADMIN's objects into JW_ADMIN
. . importing table                     "APP_USER"         76 rows imported
. . importing table                       "AUTHOR"      61874 rows imported
. . importing table                     "CITATION"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 9, maximum: 8)
Column 1 10794
Column 2 77
Column 3 1
Column 4 24
Column 5
Column 6 Science of Synthesis
Column 7 Negishi, E.-i.; Takahashi, T. Science of Synthesis...
Column 8 681–848
Column 9 2
Column 10
Column 11 2002
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 10, maximum: 8)
Column 1 10879
Column 2 77
Column 3 1
Column 4 110
Column 5
Column 6 Comprehensive Organic Synthesis
Column 7 Hiemstra, H.; Speckamp, W. N.; Trost, B. M.; Flemi...
Column 8 1047–108
Column 9 2
Column 10
Column 11
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 10, maximum: 8)
Column 1 10880
Column 2 77
Column 3 1
Column 4 111
Column 5
Column 6 Houben-Weyl Methods of Organic Chemistry
Column 7 De Koning, H.; Speckamp, W. N.; Helmchen, G.; Hoff...
Column 8 1953–200
Column 9 E21b
Column 10
Column 11 1995
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 10, maximum: 8)
Column 1 10904
Column 2 77
Column 3 1
Column 4 135
Column 5
Column 6 Houben-Weyl Methods of Organic Chemistry
Column 7 Ryu, I.; Murai, S.; de Meijere, A., Ed. Houben-Wey...
Column 8 1985–204
Column 9 E17c
Column 10
Column 11 1997
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 9, maximum: 8)
Column 1 10905
Column 2 77
Column 3 1
Column 4 136
Column 5
Column 6 The Chemistry of the Cyclopropyl Group
Column 7 Tsuji, T.; Nishida, S.; Patai, S.; Rappoport, Z., ...
Column 8 307–373
Column 9
Column 10
Column 11 1987
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 10, maximum: 8)
Column 1 10906
Column 2 77
Column 3 1
Column 4 137
Column 5
Column 6 The Chemistry of the Cyclopropyl Group
Column 7 Vilsmaier, E.; Patai, S.; Rappoport, Z., Eds. The ...
Column 8 1341–145
Column 9
Column 10
Column 11 1987
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 9, maximum: 8)
Column 1 10952
Column 2 77
Column 3 1
Column 4 183
Column 5
Column 6 Cyclopropane-Derived Reactive Intermediates
Column 7 Boche, G.; Walborsky, H. M. Cyclopropane-Derived R...
Column 8 117–173
Column 9
Column 10
Column 11 1990
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 10, maximum: 8)
Column 1 10958
Column 2 77
Column 3 1
Column 4 189
Column 5
Column 6 Houben-Weyl Methods of Organic Chemistry
Column 7 Klunder, A. J. H.; Zwanenburg, B. Houben-Weyl Meth...
Column 8 2419–243
Column 9 E17c
Column 10
Column 11 1997
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 9, maximum: 8)
Column 1 10995
Column 2 77
Column 3 1
Column 4 226
Column 5
Column 6 Science of Synthesis
Column 7 Cha, J. K. Science of Synthesis 2005, 325–338.
Column 8 325–338
Column 9
Column 10
Column 11 2005
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 10, maximum: 8)
Column 1 17123
Column 2 82
Column 3 1
Column 4 13
Column 5
Column 6 Comprehensive Organometallic Chemistry II
Column 7 Dushin, R. G.; Edward, W. A.; Stone, F. G. A.; Wil...
Column 8 1071–109
Column 9 12
Column 10
Column 11 1995
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 9, maximum: 8)
Column 1 17124
Column 2 82
Column 3 1
Column 4 14
Column 5
Column 6 Modern Carbonyl Olefination
Column 7 Ephritikhine, M.; Villiers, C.; Takeda, T. Ed. Mod...
Column 8 223–285
Column 9
Column 10
Column 11 2004
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "JW_ADMIN"."CITATION"."PAGE" (actual: 9, maximum: 8)
Column 1 17126
Column 2 82
Column 3 1
Column 4 16
Column 5
Column 6 Transition Metals for Organic Synthesis (2nd Editi...
Column 7 Furstner, A.; Beller, M.; Bolm, C. Eds. Transition...
Column 8 449–468
Column 9
Column 10
Column 11 2004      17712 rows imported
. . importing table                     "FOOTNOTE"         38 rows imported
. . importing table              "GT_STATS_REPORT"          0 rows imported
. . importing table         "GT_VALIDATION_REPORT"          0 rows imported
. . importing table                     "OR_USERS"          1 rows imported
. . importing table                     "OS_USERS"          1 rows imported
. . importing table                "PROCEDURENOTE"         70 rows imported
. . importing table                  "QC_TRACKING"     539881 rows imported
. . importing table                         "ROLE"          5 rows imported
. . importing table                       "SCHEMA"          3 rows imported
. . importing table              "TASK_ALLOCATION"     159370 rows imported
. . importing table                     "USER_LOG"     174488 rows imported
. . importing table                      "VERSION"          3 rows imported
About to enable constraints...
IMP-00017: following statement failed with ORACLE error 2298:
"ALTER TABLE "AUTHOR" ENABLE CONSTRAINT "FK_AUTHOR_CITATIONID""
IMP-00003: ORACLE error 2298 encountered
ORA-02298: cannot validate (JW_ADMIN.FK_AUTHOR_CITATIONID) - parent keys not found
Import terminated successfully with warnings.
Regards,
Subash

Can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to chnage the passwords, I haven't used the account since 2010?

can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to change the passwords, I haven't used the account since 2010?

Hi eddinchina,
You should have no need to use the Old Sync account.
As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
You may use the same email address with both accounts.

How ro export small (compressed) files (.mpg) with sound from FCP or compr.

I have some dv pal footage that I need to store in in very small files. Then I need to convert it back to dv, for editing.
The quality (regarding artefacts and all that) is not important. The stuff was ripped from DVDs originally and are only to be used as reference.
Can I export an .mpg file with sound muxed into it from FCP or Compressor?
H.264 produces to big files.
Thanks for any replyes:)
Message was edited by: Citizen_K

Hm, what a weird workflow.
I presume you are trying to edit with this stuff in FCP, so my question is, If you are grabbing media off DVDs, and converting with MPEG Streamclip or some such thing, and then trying to down-rez to edit with proxy footage, how do you plan to use timecode to reconnect to the high-res media when your cut is done?
h.264 can produce to big files or small files, depending on the settings of the file you tell it to produce to.
Consider that the amount of time you would spend converting media back and forth to low-res formats of lousy quality could be much more valuable than the cost of a firewire drive which you could use to convert your DVDs directly to DV, which you will find much easier to work with.
Hope this is helpful to U

Export All images with Folder Hierarchy?

Hi,
I use Lightroom all the time but would like to have all my photos available on my Iphone but it is not compatible with raw files. Is there a way that I could export all my images but keep their folder hierarchy intact so I would end up with a duplicate set of folders the same as I have in lightroom but the new set would only contain jpegs?
Thanks
Matt

I do just that with a free tool that has been published on "another" forum.
I'm not so sure if I can put th elink down here, but search for
Preserving Folder Tree Hierarchy using Export Plugins in 2.0
and you'll find a solution. Read the thread to the end, there are a number of improvement that never got into the "official" release.
Cheers, Peter

How do I export a frame with the Lumetri effect applied?

I've done some color correcting in SpeedGrade (dynamic link in Premiere as the Lumetri effect) and I want to use the Export Frame button in the program monitor in Premiere. It seems like this would be a trivial task, however, I can't seem to export a jpg, png, etc. that keeps the Lumetri effect applied. The exported frame is always raw, back to the frame's original state, missing the adjustments applied by the Lumetri effect. What gives? Is there something I'm missing? Shouldn't it be as simple as clicking this Export Frame button and you get what you see in the monitor, or is this a bug? Also, I've tried through Export Media and Media Encoder to no avail; the effect is still bypassed when exporting single frames/image files. Video works fine.
Anyone else experience this and have a solution/workaround? For the time being, I've resorted to Command+Shift+4 and taken a png screen grab that way, but it would be nice to be able to export the frames directly from within Premiere.

OS X 10.9.5 Adobe Premiere CC 2014.2 Release 8.2.0 (65) Build ...I just did a quick test with a different set of footage in another version of the same project, and it is working. Went back to the original version I was having trouble with, and of course, now it also works. I cannot replicate this problem again. Possibly something funky happening with Direct linking at the time I was having the issue? I restarted my computer and everything, though, and it was still there. Maybe if this happens to someone else they will find this thread and leave a comment with a little more insight as to what's going on.

Can someone help with my video setting?

I have a bunch of small, heavily compressed AVI clips that I want to edit together. But I can't figure out how to export it with the best quality. The dimensions are 640x480, but those dimensions are always different on the exported video- I'm so confused. Here is the data of my video, if someone can help me find the settings that will keep my videos at the same or almost the same quality I would be so grateful!

Hi,
This link takes you to some info about your file ( pasted below )..and from this link you can probably also find more info as it applies to your needs...maybe.....
Also, Bill Hunt's suggestion and questions seem important ...you could give more info about what you are doing and using ( version premiere) etc etc
Rod
Good Luck
http://www.modthesims.info/archive/index.php/t-236047.html
prez28
17th Jun 2007, 08:08 AM
Hello!! Hopefully I am posting in the proper section. If not, I will be glad to repost in the proper area. I am hoping that a fellow ModtheSims2 member who has experimented with movie making in the sims 2 and Adobe Premiere Pro 2.0 could answer my question: I have been toying around with movie-making in the game
I film (or capture)the video clips (or shall I say computer game animations)using the game's best option of a resolution of 640 x 480 at 30 fps with audio at 11025hz 16-Bit mono (compressed). As you are surely aware the game saves the file into AVI format with the VP61 codec. When I open and view the AVI files using Microsoft Windows Media Player, the image is beautiful and crystal clear!!
If I import the AVI file into Windows Movie Maker 2.0, same thing, the image is beautiful and crystal clear!! But here is the problem, when I import the same AVI file into Adobe Premiere Pro 2.0, and play the file into the source window, the video is heavily pixelated, in fact very large square pixels...It almost appears like a mossiac over the entire video. I tried turning the frame blending off in Adobe Premiere under 'clip' and then 'video options' but that does not appear to help. All the latest drivers for everything on my PC have been installed. Here are my specs Windows Media Center Edition 2005
P5W-DH Deluxe ASUS motherboard
Intel Dual Core 2.4ghz processor
2 XFX NVidia 7950GT graphic's card (512mb)
4GB Ram (although windows xp only uses about 2.5 to 3ghz of it)
1 200gb hard drive
1 500gb hard drive
Audigy 2 Platinum zs sound card Maybe Adobe does not support the VP61 codec, but I have not been able to confirm this anywhere. However I did find an article from the Adobe website about two machinima artists that use Adobe Premiere to make 'Sims 2' videos.
Here is the link to that article: http://www.adobe.com/motion/roosterteeth.html When I record using the game's top setting of 640 x 480 30fps, I am playing the game on a 20" widecreen LCD monitor with the resolution set at 1024 x 768. Might this be the problem? I found a 'cheat' on the internet to change the game's settings in the game's config. file so that it would capture the animations at 1024 x 768, like the resolution for my PC monitor. But once played in Adobe Premiere Pro 2.0, the clips still have the large square pixel problem... Its like big white and blue squares all over the image... But Maybe since I am using a widescreen monitor I must capture and edit in a true widecreen format like 1280x720 or above??? I dont know. I just find it weird that the AVI files play fine with Windows Movie Maker and Windows Media Player but not with Adobe Premiere Pro 2.0 Being the amature I am with Adobe, maybe I am doing something wrong. But I did search all the forums and cannot seem to find any info to fix the problem... Maybe I must convert the AVI files before importing them into Adobe, but if it could be avoided that would be cool ... so if you have any info that could help me it would be much appreciated!! Cheers!
Prez28
Sims 2 movie-maker and Adobe-Beginner
whiterider
17th Jun 2007, 11:45 AM
I'm afraid I haven't used Adobe Premiere, but have you checked on their site and support forums? I've used TS2 video clips in other movie editing programs in the past, so the format does work - it certainly sounds like Adobe is having issues there. Have you tried different codecs? You may also want to go have a look at sims99.com, a TS2 machinima site, which may have more info.
prez28
17th Jun 2007, 10:13 PM
Thank-you for your reply - I did post this question at the sites you mentionned and suprisingly received many responses from the Adobe Premiere Pro 2.0 support forums It would appear the Adobe Premiere Pro 2.0 does not like compressed AVI files and it would also appear that Adobe does not like the VP61 codec that the Sims 2 game uses to compress the movie file (AVI). When I capture the Sims 2 movies by setting the options to 'Large' (640 x 480) and 'High' (30fps) - then the clips will not play properly in Adobe Premiere Pro 2.0 But when I capture the Sims 2 movies by setting the options to 'Large' (640 x 480) and 'High, uncompressed' (30fps) - then the clips play properly in Adobe Premiere Pro 2.0 I thought I had tested this originally, but that it was not making a difference. But I must of messed up, because as I say, if I film compressed, the clips have the pixelation problems in Adobe. If I film uncompressed there is no problems with the clips in Adobe. The only downside is that uncompressed clips are very large. (Like 1.5GB for 60 second clip) Cheers!

Slideshow with music keeps stalling

My Aperture slideshow with music keeps stalling in various places.

G'day RittDog
It's relatively easy if you're prepared to spend the time doing it.
• First, forget about the slideshow option. Instead, open up an iMovie project and import your slides into it (ensure you're first set to NTSC for the US of A). Use the Ken Burns effect if you want. Also, add transitions between slides. Unlike the slideshow, you can use different transitions for each slide if your tastes run to it. Don't forget to set the required time for each slide.
• Add your music track(s)
• Now, using something like Audacity (it's free), record your voice over tracks (one per slide) for each slide (you do have a microphone/iSight don't you?). Set Audacity to 48,000 Hz by the way. Trim the tracks, or select the appropriate part. Export the trimmed tracks or the selection as AIFF files to a folder.
• Import the AIFF files into itunes, and use from there, or open the AIFF folder into the media/audio window, or simply drag & drop them. Place them into the middle track in iMovie. Arrange each voiceover to it's appropriate slide.
• Dampen the music during each voiceover, or for the whole show.
• Export to iDVD, burn as disk image.
• If you really, really want to have the voiceovers as a choice, export a Quicktime movie WITHOUT the voiceovers (untick them via the box alongside the right of the track), and then export again WITH the voiceovers (different name of course). Import the two movies into a suitable iDVD menu, with a button for each.
Regards
Santa

Export for iPhone with crop?

I did searchs for iPhone AND crop and iPod AND crop, but nothing came up, so...
Is it possible to use QT to export to iPhone with a custom crop? I'm starting with 1280x720 HD video from a Flip MinoHD. I would like to end up with something in a 3:2 ratio like 480x320 (either cropped to 1080x720 and then scaled or scaled then cropped to 3:2).
I can do this crop if I export to MPEG-4 and it works great. This export option, however, comes out as mp4, instead of m4v and doesn't work on the iPhone.
Any way to do this QT?
How about QT Pro?
Thanks!

Do you have any idea if I'm doing something wrong? Here's an excerpt from my email to the author (I didn't mention cropping as to simplify my question/bug report)
Since you did not describe your actual "crop" work flow for MPEG Stramclip I suspect that is where your problem lies. Basically you are going from a 1.78:1 to a 1.50:1 aspect ration. Therefore your will have to crop the left-right edges and not the top-bottom. Since you indicate want to end up with a 480x320 viewing area, try the following:
1) Select either of the iPhone presets. Since you will have to customize the dimensions, as well as, crop the file, it doesn't matter which preset you choose.
2) Back in the main MPEG-4 export window, re-set the "Other" dimensions to 569x320. What you are in effect doing is setting the target height of the output you want and adjusting the width to the nearest pixel for a 16:9 aspect ratio to match your source file and, thus, minimize any distortion.
3) Set output audio and/or video rates as desired (I normally use 1000 or 1200 Kbps for video and 128 Kbps @ 44.1 KHz for audio) and make any adjustments to brightness, contrast, saturation, volumes, etc. if desired.
4) Now activate the "Cropping" tool by "ticking" the correct box and leave the option in the "Destination" mode.
5) Now enter your left-right crop settings. These setting must total 89 pixels to be subtracted from the 569 scaled pixel width which will leave you with your specified 480x320 viewing area. How much you decide to crop from the left and right sides is up to you but must total 89 pixels. Thus you can keep the center area or chose to offset the viewing area as best suits your needs.
6) Now preview the content to be sure it is exactly what you want and if/when satisfied, select the "Make MP4" button to set up and begin your export.

Export to excel with formatting was autowrapping text in a cell

Export to excel with formatting was autowrapping text in a cell without having to check the can grow option. When the can grow option is checked it does wrap the text however it spans multiple rows, which causes complications when trying to sort.
It worked in:
ProductVersion=10.0.0.533
ProductName=Crystal Enterprise 10 Embedded
Doesnt work in:
Crystal Reports 10.0 Service Pack 6
After the upgrade the reports did not autowrap, b/c the "can grow" option was not checked. I believe this was fixed by "ADAPT00305137 Patch ID: 36479914
Description:
When users export to Excel 97-2000 with the page-based format, text fields are wrapped, even when the "can grow" feature in the
Designer is turned off." . After we turn the option to grow on it does wrap however it spans across multiple rows. So I guess my question is there a way for it not to span multiple rows when wrapping text?
Edited by: dforde on Jan 27, 2010 11:12 PM

I could be wrong, but I believe the export to excel option exports the database values, and the export to HTML exports the values seen in the sheets. If the database values are stored as seconds, the Excel will see them as seconds, and the data will have to be formatted properly in Excel.
I haven't toyed around with Excel exports that much, but it might be possible to set up a template or macro in excel that would have the proper formatting, and use it when opening the Disco export.

Export in iPhoto offers a "Custom" setting for size. The default is 1000. 1000 what? Pixels, centimeters, MB's?

Export in iPhoto offers a "Custom" setting for size.
1000 is the default, but I don't know what 1000 refers to.
Pixels, centimeters, MB's?
I want to make the photo an 1 inch x 1 inch.
Do I go up or down from the 1000?
Thanks

Pixels.
For a 1" x 1" photo first crop the photo square. Then export with Kind = Current with JPEF Quality = Maximum and Size = Full size.
Then when you go to print the photo select a 1" x 1" print size. This will squeeze all available pixels in each dimension into the 1" dimension giving you the highest DPI resolution available from your image file.
More about DPI can be found here: All About Digital Photos - The Arithmetic of DPI and All About Digital Photos - The Myth of DPI
OT

Wrong aspect ratio or size when exporting Pal anamorph with ProRes codec!

Hi community,
I have a problem exporting a spot in the right format. The customer/the upload service provider needs PAL anamorph 16:9 in ProRes codec.
When I export my FULLHD spot to these setting, the aspect ratio/the spot size turns out wrong. When opened in QT Pro the size is 720x576, what is correct, but the anamorph size quotet in brackets reads different values, for example 1020x576 but never 1024x576, what would be correct.
The service providers online software refuses to work with these wrong nunmbers...!?
The same export settings with QT Animation codec is correct. Also when exporting the same composition with two export modules, the Animation codec is OK, the ProRes codec is wrong. No matter whether I export a PAL-format comp or stretch it while exporting the FullHD comp.
Working with After Effects CC.
Any ideas?

Don't resize the output but instead drop your full HD comp in a standard PAL widescreen comp, fit the HD comp horizontally and then render the new comp without using any resize controls.
Second option, Render your full HD comp to a frame based production master codec (prorez) and then use the Adobe Media Encoder and setup a PAL Widescreen Square Pixel preset. Here's my Pal Widescreen Prorez 422 HQ preset. It is what I use for all requests for Pal ProRez from my clients.

Export Indd to EPS/JPG and set the file name for EPS/JPG file

Hi,
When I export the INDD to JPG/EPS, I want to set the file name with pageNumber for JPG/EPS files using javascript.
For Example
If I set the file name as EPSFile.eps, after exporting the indd(with 2 pages) to eps
,files are generating in the following name EPSFile_1.eps, EPSFile_2.eps.
but I want to set the file name as EPSFile_001.eps and EPSFile_002.eps using javascript.
anyone knows please reply for this.
Regards,
Mubeen

Hi,
I tried the following code.
var JPGe = new File("Applications/PDF/JPG/file.jp");
app.activeDocument.exportFile(ExportFormat.jpg, );
when I use this code ,exported jpg file names are
file.jpg, file1.jpg,file3.jpg.
but ,I want the output file names as file_001,file_002,file_003,
Thanks,
Mubeen

Exporting to .mpg with multiplexing ... keeps setting to "none"

Similar Messages

Maybe you are looking for