Exporting to Powerpoint 2007 using the 2007 formats

I'm currently running Xcelsius 2208 and Office 2007. Because I was the first to get Office 2007 I've had to continue saving in the Office 97-2003 format (.ppt). Now that everyone has caugth up if I save in the .pptx or .pptm format the .swf appears to disappear after the file is saved and reopened. Does the .swf only run in the .ppt mode?

Hi Maureen,
You have to keep saving as PPT because PowerPoint does not support embedded Adobe Flash files in a PPTX (Office 2007).
Refer to the Export to Microsoft Word 2007 and PowerPoint 2007 in the General Issues section of the Xcelsius 2008 release notes.
Regards,
Matt

Similar Messages

How do I view videos from my Panasonic SD40 camcorder that use the bmg format?

I just bought a Panasonic SD40 camcorder but my IMAC will not read the SD card. I believe that the Panasonic is using the bmg format.
Any suggestions?

According to iMovie '11 Supported Cameras your camera is supported by iTunes 11. I would recommend using the iMovie Tutorials.

Like most professional photographers, I shoot and edit in RAW rather then JPEG. Is Photos app going to allow me to use the RAW format?

Like most professional photographers, I shoot and edit in RAW rather then JPEG. Is the Photos app going to allow me to use the RAW format?
iMac with 3TB drive and 32 GIG of RAM. Three DROBO storage systems for data and backup.

Try the alternatives, or wait for reports by the users who already migrated. For example, Capture One is more similar to Aperture than Lightroom:
http://www.cnet.com/news/phase-ones-updated-image-editor-throws-apple-aperture-u sers-a-lifeline/
http://www.photographybay.com/2014/10/01/capture-one-pro-8-unveiled-features-app le-aperture-migrate-option/
I'll keep my main libraries in Aperture, as long as it compatible with the operating system. If that no longer works, I'll start a new main library with digikam. If there is no native Mac application, that offers what I need for my workflow, I'll switch back to open source software.

Cameras that use the AVCHD format

I was trying to decide, for a possible future purchase, between the Panasonic AG-AF100 and the Sony FS 100UK.
However, I am having reservations now. I am not conversant with the intricacies of the various codecs and someone mentioned in an article that thet would not use the AVCHD format under any circumstances. Probably a biased viewpoint no doubt but it has me thinking and now hesitant.
Can anyone advise me as to whether this is a detriment when thinking of these two cameras since they both use the AVCHD format? At the moment I am using a Canon XH A1s.
I hope this is not a dumb post. Please go easy on me :-)
Trevor

Well, I can tell you that there is a substantial improvement when going from HDV to AVCHD. It's very visible. I just cut some HDV footage for the first time in years yesterday, after cutting mostly AVCHD for the last 3-4 years now. It was painful to look at, even though it was 1080.
As for AVCHD in general, it's not the easiest format to edit. It is highly compressed. That being said, Premiere Pro CS6 and a quality Nvidia GPU combine to make editing AVCHD almost a non-issue nowadays.
I know plenty of folks who shoot on AVCHD cameras and bypass the compression by recording to a separate recorder via HD-SDI or HDMI. Generally speaking it's for color correction latitude, since most serious filmmakers would prefer to capture 4:2:2 than 4:2:0.
However, I also know quite a few adventurers who do features and record directly to the AVCHD media on the AF100. One guy I know has even had it checked out by Technicolor and they said it looked great.
Here's one of his features shot on the AF100, direct to the AVCHD media onboard:
I know he recently did some other work with a Canon 5D and recording off the camera but then the 5D is bit of a different beast than the AF100 or FS100.
As for choosing between the Sony and Panasonic....well, I'm almost as big of an Adobe fanboy as I am a Panasonic fanboy. I've used the Panasonic cameras for years and I really have found that the layout of the camera controls, the depth of the camera controls and the overall image from Panasonic cameras is excellent. I've never been much impressed with Sony gear, it used to be a lot worse (when you used a Sony camera, you used to pretty much be obligated to use Sony media, Sony hardware, etc). But I've found Sony cameras to be a bit less user friendly, with a lot of things either buried in menus or not available at all when compared to their Panasonic counterparts. Just one man's opinion, take it or leave it.
I really like the images from the AF100, we've worked with it a few times now and it's quite versatile. There are, however, more options coming soon. If you are interested in being on the bleeding edge of technology, Blackmagic Design is soon releasing their first ever camera, a 2.5K sensor camera for about $3,000. Like the AF100, it doesn't include a lens but can work with most any glass out there. However, it IS the company's first foray into any kind of camera, and it's completely untested by the user community at large so if you need a camera with a confirmed workflow, it ain't ready for primetime yet.

Using the same format like Excel

Hello everybody,
I need to make a convention to a Time Stamp which should be interpreted as number in Excel ( see the below picture, format cell... number) and save the data to txt or excel file. The Point is I can`t save the raw data to excel , first I need to do a conversion as given.
How can I build this algorithm? and save my chart elements together with their time stamp like:
x1,y1,z1, time-stamp     ( e.g 100,100,300, 37918,87500 >>> means x=100,y=100,z=300 at 24.10.2003 21:00:00,10)
x2,y2,z2, time-stamp     (        101,102,301, 37918,87501 >>> means x=101,y=102,z=301 at 24.10.2003 21:00:00,20)
                                        (         105,100,300, 37918,87581 >>> means x=100,y=100,z=300 at 24.10.2003 21:00:01,00)
...x1000000,y1000000,z1000000, time-stamp
p.s: I already found the days which I divided the time passed after 1.1.1904 up to now and divide it by 86400 and round it to next number , this part is done but in excel after the comma is for the time e.g 0,5 means 12:00:00 AM    resp. 0,6 14:24:00 AM  resp. 0,51 means 12:14:24
p.p.s: x1y1z1 to x10y10z10 is 1 seconds , so each row is 100 ms !
p.p.p.s: I could send the date and time as sting to the text file but Excel crashes after few hundred thousand alues , so I want to do the conversion first in Labview and then save already converted values in a txt resp. excel file.
Pls help
pls see the picture below.
Attachments:
AAA.JPG ‏46 KB

I think your problem is that you are using a comma has your decimal separator rather than a decimal point ".".
If you are writing out your various values to a text file and the values are comma delimited, then the commas you are using as a decimal point are being confused as a delimiter rather than being an inherent part of the decimal value. I suggest using the standard of a period as the decimal point (but I'm not sure if Excel would still have a problem if your windows settings are using an international setting of comma). Perhaps wrapping the text part of your time and date in quotes so Excel will import the date and time as a single entity rather than 2-3 entities because of the comma embedded in it.   But that doesn't explain why Excel would be crashing.
It sounds like you are already handling the 1/1/1904 in Labview vs. 1/1/1900 in Excel base date okay as well as seconds in LV vs. days in Excel..
(By the way, I think 0.5 in Excel is 12:00:00 PM not 12:00:00 AM)
Which version of Excel are you using? Most versions of Excel only got to 65,000 + rows. Only the latest version goes up to 1 million or something like that. Could that be the source of your crash?
Edit: Perhaps one other possibility would be to use another character as a delimiter such as TAB or any other character that doesn't usually show up in data files such as pipe | or tilde ~
Message Edited by Ravens Fan on 12-12-2007 10:19 PM

Use the default format and partition step to format disk0 partition 1 in multiple disks sutiation

As we know,we need to disable the default format and partition step in ts to let mdt deploy os on C and leave the other partitions stay safe when there is only one disk on pc，and the way of installing operation system is logical drive letter store in a varible.
But what if there are 2 disks on pc，and for a record the disk 0 is always the OS disk,don't need to confirmed this.How can we modify the format and partition step to format only C on disk0 under this condition?then lead the mdt to do the rest deployment
by itself.
Thanks

You are pushing up against the design limits of MDT, and the more complex and/or arbitrary the disk configuration the harder it is for MDT to perform installations.
If you want to maintain the *existing* disk configuration, and just update the OS present, then the recommended course of action is to run MDT from *within* the OS (cscript.exe
\\server\deploymentshare$\scripts\litetouch.vbs), not from WinPE. When you do this, it's called a "refresh" scenario. MDT can capture the user files via USMT, and it knows which
partitions to use, because it's launched from within the OS itself.
Disabling the default Format and Partition step has other unintended consequences.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Can you save your own theme and button set up so I can use the same format

Can you save your own theme and button set up, so I can use this same format for similar content. I want to keep the button content and the theme the same without having to create it everytime? I am trying to streamline the process for multiple dvd's with the same menu and buttons but different content. Does that make sense?

I am only new to this caper too, but I am pretty sure you can save a theme as a favourite by pressing the "save theme as favourite" button under file. If you have edited an existing theme but don't want to lose it, make sure you untick the replace existing button.

How can I auto export a PDF File using the "Smallest File Size" preset and set the Exported File Name based on information from an Imported PDF?

Greetings all,
I am trying to create a script to automate a PDF export process for my company for inDesign. I’m fairly new to inDesign itself and have no previous experience with javascript, although I did take C++ in high school and have found it helpful in putting this code together.
We have an inDesign template file and then use the Multi-page PDF importer script to import PDF files. We then have to export two version of each file that we import, then delete the imported file and all of the pages to reset the template. This has to be done for nearly 1000 pdf files each month and is quite tedious. I’m working on automating the process as much as possible. I’ve managed to piece together code that will cleanup the file much quicker and am now trying to automate the PDF exports themselves.
The files are sent to us as “TRUGLY#####_Client” and need to be exported as “POP#####_Client_Date-Range_North/South.pdf”
For example, TRUGLY12345_Client needs to be exported as POP12345_Client_Mar01-Mar31_North and POP12345_Client_Mar01-Mar31_South.
There are two templates built into the template file for the north and south file that are toggled easily via layer visibility switches. I need to get a code that can ideally read the #s from the imported Trugly file as well as the Client and input those into variables to use when exporting. The date range is found in the same place in the top right of each pdf file. I am not sure if this can be read somehow or if it will have to be input manually. I can put North or South into the file name based on which template layer is visible.
I am not sure how to go about doing this. I did find the following code for exporting to PDF with preset but it requires me to select a preset and then type the full file name. How can I set it to automatically use the “Smallest File Size” preset without prompting me to choose and then automatically input some or preferably all of the file name automatically? (If the entire filename is possible then I don’t even want a prompt to appear so it will be fully automated!)
PDF Export Code (Originally from here: Simple PDF Export with Preset selection | IndiSnip [InDesign® Snippets]):
var myPresets = app.pdfExportPresets.everyItem().name;
myPresets.unshift("- Select Preset -");
var myWin = new Window('dialog', 'PDF Export Presets');
myWin.orientation = 'row';
with(myWin){
    myWin.sText = add('statictext', undefined, 'Select PDF Export preset:');
    myWin.myPDFExport = add('dropdownlist',undefined,undefined,{items:myPresets});
    myWin.myPDFExport.selection = 0;
    myWin.btnOK = add('button', undefined, 'OK');
myWin.center();
var myWindow = myWin.show();
if(myWindow == true && myWin.myPDFExport.selection.index != 0){
    var myPreset = app.pdfExportPresets.item(String(myWin.myPDFExport.selection));
    myFile = File(File.saveDialog("Save file with preset: " + myPreset.name,"PDF files: *.pdf"));
    if(myFile != null){
        app.activeDocument.exportFile(ExportFormat.PDF_TYPE, myFile, false, myPreset);
    }else{
        alert("No File selected");
}else{
    alert("No PDF Preset selected");
So far my code does the following:
1) Runs the Multi-Page PDF Import Script
2) Runs PDF Export Script Above
3) Toggles the Template
4) Runs #2 Again
5) Deletes the imported PDF and all pages and toggles template again.
It’s close and much better than the original process which was almost 100% manual but I’d like to remove the Preset prompt from the PDF script and have it automatically select the “Smallest File Size” preset. and then if there’s a way to have it auto-fill in the file name so no user input is required at all other than selecting each file to import. (If there’s a way to setup a batch action for the multi-import script that would be even better!)
Thanks in advance and if there’s anything else I can provide that would help please let me know! Even a nudge in the right direction will be a big help!

If you hold down the option key, it will typically show the location. Or you can often hit option-return on the file and it will reveal the file in the Finder, instead of opening it.
Final option is to open it, and just option-click the filename in the toolbar of Preview and it should show you the location.
It's probably an attachment to an email you've received. If you have Mail set to cache emails and their attachments it'll be stashed in a subdirectory of ~/Library/Mail. Which is fine.

How do I create a new website using the same format as my last one?

I created a site last year and now I want to use the same templates for blog, photos, albums, etc. as last year's. In other words, I'm looking for a "save as" where I can add new content but not have to re-format everything. Thanks for helping.

Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
OT

How do I sort by month ? using the "Month" format

Hello All,
Is it possible to sort by month using the follwoing SQL.
Select TO_CHAR (RCA_CLOSE_DATE, 'MON-YY') "Month",
SUM (ADJUSTMENT_INCL_GST)
From My_Table
Group By TO_CHAR (RCA_CLOSE_DATE, 'MON-YY')
Output
Month Sum(Adjustment Incl Gst)
APR-06 $6,539,983.08
AUG-06 $23,122,705.31
FEB-06 $14,365,106.52
JUL-06 $19,776,122.04
JUN-06 $20,161,278.12
MAR-06 $8,248,955.87
MAY-06 $18,498,683.04
NOV-06 $24,120,095.49
OCT-06 $12,781,721.23
SEP-06 $15,632,604.21
Hope someone can help
Frank

If the desired sort order is MM-YYYY, then how would...
ORDER BY
    TO_CHAR(RCA_CLOSE_DATE, 'MM-YYYY') ...not achieve this?
Perhaps the original poster could clarify what they mean by "sort by month". In numeric order by month then year, in numeric order by year then month, or in some other order?
If you do not like TO_CHAR, another approach (again assuming "numeric order by month then year" is what is desired) might be:
SELECT
    TO_CHAR(RCA_CLOSE_DATE, 'MON-YY') AS MONTH,
    SUM(ADJUSTMENT_INCL_GST) AS TOTAL
FROM
    MY_TABLE
GROUP BY
    EXTRACT(MONTH FROM RCA_CLOSE_DATE),
    EXTRACT(YEAR FROM RCA_CLOSE_DATE),
    TO_CHAR(RCA_CLOSE_DATE, 'MON-YY')
ORDER BY
    EXTRACT(MONTH FROM RCA_CLOSE_DATE),
    EXTRACT(YEAR FROM RCA_CLOSE_DATE)In any event, in a query with GROUP BY clause:
1. The expression(s) in ORDER BY clause do not need to appear in the SELECT clause.
2. The expression(s) in ORDER BY clause do need to appear in the GROUP BY clause (unless you want to order on the result of an aggregate expression, like involving SUM, which does not appear to be the case here).
3. Expressions in the SELECT clause do need to appear in the GROUP BY clause, unless they are aggregate expressions, like involving SUM.
Hope this helps.
P.S. If the desired order is "in numeric order by year then month", then you might use TRUNC like this:
SELECT
    TO_CHAR(RCA_CLOSE_DATE, 'MON-YY') AS MONTH,
    SUM(ADJUSTMENT_INCL_GST) AS TOTAL
FROM
    MY_TABLE
GROUP BY
    TRUNC(RCA_CLOSE_DATE, 'MONTH'),
    TO_CHAR(RCA_CLOSE_DATE, 'MON-YY')
ORDER BY
    TRUNC(RCA_CLOSE_DATE, 'MONTH')Doing the TRUNC in a subquery and formatting the result in the outer query as John has suggested may be more efficient.

Export values to listbox with the same format

Dears,
kindly i need some support please to solve this problem.
I have a listbox that retrieve a data as per auto filter based on 3 criteria, but these data isn't retrieved with the same format, i retrieve these data from tow different tables, both of them exported with the default format,
note: the table source is imported via "Existing connections" but the values format are processed at both of all, is this problem related to the data source or lixtbox options
i uploaded the whole workbook, you can call the userform from sheet that called "Interface", and fill the 1 & 2 combobox with any inputs, and the last combobox you have to choose "Dec", then hit "Daily" or "Monthly"
button
Private Sub Daily_Click()
Dim Source As Range, c As Range, i%, Aux As Worksheet
Dim fa As Range, nc%, ca, v As Range, A As Worksheet, s$
Me.ListBox1.ColumnCount = 11
ListBox1.Clear
Application.ScreenUpdating = True
Set A = ThisWorkbook.Sheets("Daily")
Set Aux = ThisWorkbook.Sheets("popup") ' auxiliary sheet
Set Source = A.Range("A1:CB1")
Set c = A.Range("a1").CurrentRegion
Source.AutoFilter Field:=1, Criteria1:=Month_list.Value
Source.AutoFilter Field:=4, Criteria1:=Leader_list.Value
Source.AutoFilter Field:=6, Criteria1:=User_list.Value
Set v = c.SpecialCells(xlCellTypeVisible) ' filtered range
Aux.Cells.ClearContents
v.Copy Aux.Range("a1")
Set fa = Aux.Range("a1").CurrentRegion
nc = fa.Columns.Count
ca = Array(3, 13, 14, 15, 16, 17, 21, 30, 31, 32, 33) ' columns you want
For i = LBound(ca) To UBound(ca)
fa.Columns(ca(i)).Copy Aux.Cells(1, nc + 3 + i) ' create final range
Next
Me.ListBox1.List = Aux.Cells(1, nc + 2 + i).CurrentRegion.Value
With Me.ListBox1
Me.ListBox1.BoundColumn = 1
Me.ListBox1.BorderStyle = fmBorderStyleSingle
Me.ListBox1.ColumnHeads = True
Me.ListBox1.BackColor = RGB(255, 255, 255)
Me.ListBox1.ColumnWidths = "70; 75; 57; 80; 90; 150; 60; 80; 80; 80; 80; 70"
Me.ListBox1.BorderStyle = 1
Me.ListBox1.MultiSelect = fmMultiSelectExtended
End With
End Sub
the workbook
thanks a lot,

Either you need to reformat the values in memory as required before populating to the ListBox, or if the cells are formatted the way you want you can read the cell's text values, though not in one go as an an array.
Based on a quick look of your code above try the following, but adapt if it's not quite right
Set fa = Aux.Range("a1").CurrentRegion
nc = fa.Columns.Count
ca = Array(3, 10, 14, 16, 20, 21, 22, 23, 24) ' columns you want
'' don't need this
' For i = LBound(ca) To UBound(ca)
' fa.Columns(ca(i)).Copy Aux.Cells(1, nc + 3 + i) ' create final range
' Next
Dim lastRow As Long, j As Long ' put these up top
' after copying to Aux, but no need to
lastRow = Aux.Range("a100000").End(xlUp).Row
ReDim arr(1 To lastRow, LBound(ca) To UBound(ca))
For i = LBound(ca) To UBound(ca)
For j = 1 To lastRow
arr(j, i) = Aux.Cells(j, ca(i)).Text
Next
Next
Me.ListBox1.List = arr

HT5537 How do you import/export garage band projects using the latest version of iTunes when there is no apps in the left column to select garageband?

I am perfectly aware of how to do this using the old version of itunes.
however i just got a new macbook pro retina... and it came with the latest version of itunes.
and i was trying to import/export garage band files between my ipad and mac via itunes.
and the option for apps, that is usually on the left side where you can then select garage band from in itunes, isnt there in the new version of itunes.
has anyone got a work around for this?
thanks.
nic

Nic, for me the iTunes window looks like this, when I connect my iPad 3:
I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
Click the "Apps" tab in the "Devices" pane.
Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
Then do I click "GarageBand" to select the documents in the right panel.
Which part is different for you? Perhaps you could post a screenshot?
Regards
Léonie

Why reports uses the .eps format when emailing a report?

Hi
If you select to send a report by email, it automatically
chooses the .eps format to send the report as an attachment.
I know it stands for "encapsulated post script" (I think...),
but is there a way to send in PDF format for example?
Till now, the user has to generate the report in PDF format
and then, manually, create an email and attach such file.
And what program opens such type of file (eps)?
Thanks
Luis Cabral

The .eps format is a postscript format type used to send directly to the printer. I really don't know why this format is good but ...
A way to send an e-mail attachment in HTML, PDF or RTF format, is setting the parameters DESTYPE and DESFORMAT, but this way enforces you to create another way to trigger the e-mail cause the button e-mail in Oracle Reports uses .eps by default.
I suggest you to create a parameter form with the format option and trigger the reports by RUN_PRODUCT built-in. If you don't need to preview the report, set the properties in the parameter form and trigger the report normally.
DESTYPE=MAIL
DESFORMAT=PDF or DESFORMAT=HTML or DESFORMAT=RTF

Problem in tree while using the HTML format in the lable

Hi all,
DefaultTreeCellRenderer is not working properly if we pass the string as a html format inside the DefaultMutableTreeNode. Using the below code snipet you can cleraly identify the problem.
Kindly compile &execute the below code.All the lable's will be painted properly according to the color code that i've mentioned.
After that please uncomment al the DefaultMutableTreeNode variables corresponding to html tag representation and comment the already existing DefaultMutableTreeNode variables .
someone please clarify me the things what is happening here?
import java.awt.BorderLayout;
import javax.swing.*;
import javax.swing.tree.*;
import java.awt.*;
public class MultiLineTreeDemo extends JFrame {
 private JTree tree;
 final int[] colorcode={0xFF0000,0x00FFFF,0x0000A0,0x800080};
 public static void main( String[] args ) throws Exception {
 SwingUtilities.invokeLater( new Runnable() {
 public void run() { new MultiLineTreeDemo(); }
 public MultiLineTreeDemo() {
 super( "MultiLineTreeDemo" );
 setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
 DefaultMutableTreeNode root = new DefaultMutableTreeNode( "<html>This isthe root node.</html>" );
 DefaultMutableTreeNode node = new DefaultMutableTreeNode( "<html>This isa child node.<html>" );
 DefaultMutableTreeNode leaf = new DefaultMutableTreeNode( "<html>This isa leaf node.<html>" );
 DefaultMutableTreeNode leaf1 = new DefaultMutableTreeNode( "<html>This isa leaf1 node.<html>" );
 /*DefaultMutableTreeNode root = new DefaultMutableTreeNode( " root node" );
 DefaultMutableTreeNode node = new DefaultMutableTreeNode( " child node" );
 DefaultMutableTreeNode leaf = new DefaultMutableTreeNode( " leaf node" );
 DefaultMutableTreeNode leaf1 = new DefaultMutableTreeNode( " leaf1 node" );*/
 node.add(leaf);
 root.add( node );
 root.add( leaf1 );
 tree = new JTree( root );
 tree.setCellRenderer(new DefaultTreeCellRenderer()
 public Component getTreeCellRendererComponent(JTree pTree,
 Object pValue, boolean pIsSelected, boolean pIsExpanded,
 boolean pIsLeaf, int pRow, boolean pHasFocus)
 JLabel lbl = (JLabel)super.getTreeCellRendererComponent(pTree, pValue, pIsSelected,pIsExpanded, pIsLeaf, pRow, pHasFocus);
 DefaultMutableTreeNode newNode=(DefaultMutableTreeNode)pValue;
 if(newNode.isRoot())
 lbl.setForeground(Color.red);
 else if(newNode.isLeaf())
 lbl.setForeground(Color.green);
 else
 lbl.setForeground(Color.blue);
 JPanel p = new JPanel();
 p.setBackground(tree.getBackground());
 Dimension d = lbl.getPreferredSize();
 p.setPreferredSize(new Dimension(d.width, d.height));
 p.add(lbl);
 tree.setRowHeight(80);
 return (p);
 setLayout( new BorderLayout() );
 JScrollPane scrollPane = new JScrollPane( tree );
 add( scrollPane, BorderLayout.CENTER );
 setSize( 200, 200 );
 setVisible( true );
}Thanks in Advance.
Sivabalan

Then I guess the problems come with setting explicit foreground colours on the one hand and using html on the other, even when not specifying them in the html. Stick to one or the other, I suppose. I'm not a fan of using html in labels so I don't know what problems you might run into.
I've got rid of setForeground in the renderer and set the font colour in html. Then it is stable:
import java.awt.BorderLayout;
import javax.swing.*;
import javax.swing.tree.*;
import java.awt.*;
public class MultiLineTreeDemo extends JFrame {
 private JTree tree;
 final int[] colorcode={0xFF0000,0x00FFFF,0x0000A0,0x800080};
 public static void main( String[] args ) throws Exception {
 SwingUtilities.invokeLater( new Runnable() {
 public void run() { new MultiLineTreeDemo(); }
 public MultiLineTreeDemo() {
 super( "MultiLineTreeDemo" );
 setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
 DefaultMutableTreeNode root = new DefaultMutableTreeNode( "<html>This isthe root node.</html>" );
 DefaultMutableTreeNode node = new DefaultMutableTreeNode( "<html>This isa child node.<html>" );
 DefaultMutableTreeNode leaf = new DefaultMutableTreeNode( "<html>This isa leaf node.<html>" );
 DefaultMutableTreeNode leaf1 = new DefaultMutableTreeNode( "<html>This isa leaf1 node.<html>" );
 DefaultMutableTreeNode root = new DefaultMutableTreeNode( " root node" );
 DefaultMutableTreeNode node = new DefaultMutableTreeNode( " child node" );
 DefaultMutableTreeNode leaf = new DefaultMutableTreeNode( " leaf node" );
 DefaultMutableTreeNode leaf1 = new DefaultMutableTreeNode( " leaf1 node" );
 node.add(leaf);
 root.add( node );
 root.add( leaf1 );
 tree = new JTree( root );
 tree.setCellRenderer(new DefaultTreeCellRenderer()
 public Component getTreeCellRendererComponent(JTree pTree,
 Object pValue, boolean pIsSelected, boolean pIsExpanded,
 boolean pIsLeaf, int pRow, boolean pHasFocus)
 JLabel lbl = (JLabel)super.getTreeCellRendererComponent(pTree, pValue, pIsSelected,pIsExpanded, pIsLeaf, pRow, pHasFocus);
 DefaultMutableTreeNode newNode=(DefaultMutableTreeNode)pValue;
// if(newNode.isRoot())
// lbl.setForeground(Color.red);
// else if(newNode.isLeaf())
// lbl.setForeground(Color.green);
// else
// lbl.setForeground(Color.blue);
 //JPanel p = new JPanel();
 //p.setBackground(tree.getBackground());
 //Dimension d = lbl.getPreferredSize();
 //p.setPreferredSize(new Dimension(d.width, d.height));
 //p.add(lbl);
 //tree.setRowHeight(80);
 //return (p);
 return (lbl);
 setLayout( new BorderLayout() );
 JScrollPane scrollPane = new JScrollPane( tree );
 add( scrollPane, BorderLayout.CENTER );
 setSize( 200, 200 );
 setVisible( true );
}

Using the container format to call BAPIs

I'm trying to call BAPIs with the SWO_CREATE and SWO_INVOKE RFC's, and having a difficult time getting the container marshalled correctly. Can anyone supply or point me to information about marshaling arguments in the container?
Thanks

Hi Jhon,
I have seen your question for the container format to call BAPI and could not find any replies or any kind of information regarding the container marshalling on the web. I am having a simillar problem when invoking the SWO_INVOKE, i am passing a container and it gives me a error saying "packed field with incorrect BCD format" and i am trying to find some kind of solution for this, if you had a some kind of solution or guidance that would be great.
Thanks,
Praveen

Exporting to Powerpoint 2007 using the 2007 formats

Similar Messages

Maybe you are looking for