Exporting to QT and no audio
I have done this many of times and no issues.
Now when I export, using QT Movie and say audio/video self contained. I get the video on playback in QT but no audio.
suggestions
Using FCE HD 3.01, QT pro
Al and Tom
not really sure what happened, tried late last night and it worked, my mac has a mind of its own, or its the loose nut in the seat...:-)
Next time I will try your suggestions, I don't post a lot as I find most my answers in searching.
thanks again guys
Similar Messages
-
My movie is a wedding, so it's 1 hr 35 min long. I've used 3 songs from iTunes and no other outside audio. I've tried the following already:
Changing the encoding settings from Best Performance to Professional Quality. (becuase an error came up saying movie is too long, change encoder setting)
Changing the Single-Layer Disc to Double-Layer Disc.
Splitting the video into 2 parts to make it shorter.
Getting rid of the noise reduction on a few of the clips.
Optimize--Full.
I get things that say 'error -41' etc. but I googled this and nothing came up as to what that error code means.
Is the amount of free space I have on my Mac a possible problem as well? I have 40 GB available. I tried moving all of the rejected clips to the trash and an error came up saying not enough space to delete.
Can I uninstall '11 and go back to using '09??Hi
Error -41 mFulErr Memory full (open) or file won't fit (load)
So if You've really got 40Gb free space on Start-Up (Mac OS) hard disk - Others DO NOT count as neither iDVD or Mac OS can use space there for it's temp files.
Then I would close down Mac even disconnect Mains - Then re-start it and see if it got's it's memory right.
Else
• Audio from iTunes - use to give me problems - so I do - in iTunes
• collect the needed audio into a new PlayList
• Burn this out as an Audio-CD (.aiff) - NOT .mp3
• Use thge files on this CD in movie projects
Works for me.
Yours Bengt W -
I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?
I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1. Thanks for any input.
-
when i play in premiere it ok but when i export it become not sync whith the audio
i was do a test with some player ,when i play from all this player it result is not the same:
KMPlayer :Audio not sync with video
itune :audio not sync with video and very lag
QuickTime :Can't play anymore
Windows Media Player : Very good no lag and the audio perfectly sync with video
put in Audition CC2014 (Multitrack) :Audio sync with video but very lag
put in Premiere Pro CC2014 (create new project and put the video in) :very lag but audio was sync
Nero Kwik Media :Very good no lag and the audio perfectly sync with video -
When i try to export any clips to .m4v (movie to ipod) or .mpeg4 the video is exported but has no sound. When i select "export to .mpeg4" and click on "options" it says "audio: no audio track in source movie". This is the same message displayed on all the clips i have tried to export.
Does anyone know how i can record the audio for .m4v files or .mpeg4 files?
Thankyou so much in advance for your help.
.BenX
Windows XPI'm using Quicktime Pro v 7.0.4 on Mac. I tried exporting Quictime mpeg4 to iPod format and get only video but no audio! And I'm talking Apple all the way. These files were made from a Sony digital camera with the digital video record option.
Believe most (if not all) Sony digital cameras still use MPEG video format. As such, the files contain a "muxed" stream consisting of blocks of video data interspersed with blocks of audio data for A/V synchronization. As Kirk alluded to above, QT is a "frame-to-frame" sync application and does not fully support "muxed" (e.g., MPEG1, MPEG2, VOB, some AVI, MJPEG, etc.) formats.
I do use a 3rd party program called Snapz Pro X to capture to .mpeg4 and these files export just fine to iPod format!
Good solution for capturing streamed video but not the best here. As you suggested, use a third party, MPEG based application like iSquint (free) or, better yet, MPEG Streamclip (free) for one-step conversion with audio.
I tried to convert the mpeg4 format to MOV format and then convert MOV to m4v but no audio there.
No surprise here. If you check your first MPEG4 file you will see that no audio track was present following the initial conversion and no amount of further conversions will add a non-existent audio track. -
Export and import audio at the same time
im trying to export audio from my macbook pro to a mixer then import it back in to webstream it
i also desperately need to record and play audio at the same time.. i have a term project, i am develeoping a karaoke player in j2me and it is supposed to capture the voice at the same time background song is played.. and it is also supposed to grade the singer according to the pitch of voice.. please help me about recording and playing audio at the same time...
-
After BIOS update failure and rollback, audio hot keys detect press but do not function
All other hot keys appear to function properly, only the mute/audio-/audio+ hot keys do not work.
I can press the key and the vertical volume indicator displays but it does not move.
At this time, I suspect this has to do with the failed BIOS update yesterday. All keys functioned properly before the failed BIOS update.
All HP drivers and software are updated to latest.
Another symptom I don't know may be related is that my bluetooth headphones have refused to connect once now without a full reboot. Bluetooth would connect and speaker audio audio would be muted, and sometimes "Manage Audio Devices" indicated connected to headphones but no headphone audo. Will warrant further watching.
The BIOS update was the most recent as of this writing and attenmpted to update only yesterday. I watched as the new BIOS progressed all the way to the point the BIOS attemnpted to flash and failed, then rolled back. I assume a backup was flashed because all my non-default BIOS settings had to be reset (non-UEFI boot, enable virtualization).
TIA,
Tony
BTW - I find it odd I can't just press a button to export/print my system configuration from the HP Support Assistant, I have to click every individual entry separately, but here goes...
The current running BIOS is F.63
The full results follows
HP ENVY TS 17 Notebook PC
5CG3331YPX
E9G82UA#ABA
Windows 8 64-bit
Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
12GB
4GB Micron Technology 1600MHz
8GB Hynix 1600MHz
Intel(R) HD Graphics 4600
1920 x 1080
60
1965 KBC Version 93.51
F.63
IDT High Definition Audio CODEC
Bluetooth Hands-free AudioSeems after another day,
The problem resolved itself.
No reboot, no significant changes to the machine I can think of since my original post.
Just a spontaneous self-fix.
Thx,
Tony -
New Media Encoder Error: video and/or audio filters are missing...
My colleague reported this error popup window while using Adobe Media Encoder CC (up-to-date):
"video and/or audio filters are missing and the rendered output may not match the original"
I've been seeing similar errors the past few days. I can't remember if the wording was the same in the errors I saw, but the circumstances were the same.
I've never seen this popup error before the most recent CC update.
Some background info:
I queued up multiple Premiere Pro pproj files as usual from within Premiere
without rebooting or deleting any cache or temp files or anything, I start the queue
I have no special plugins installed in Premiere. Vanilla CC install.
Windows 7, 64-bit
This error doesn't tell me what audio/video filter(s) are missing. The output files, once I dismiss this warning, are perfect.
The major problem: It stops the queue dead in it's tracks. Sure, it might seem handy to stop and give you a warning, but when it's a false report and there's nothing wrong, it's killing us, because we queue up multiple files for encoding overnight, and we're not here to get the popups.
What is likely causing this? Is it a bug that this is appearing so frequently? Has anyone else experienced this besides my colleague and I?
Thanks!Update for anyone experiencing this issue:
We are still investigating the cause of the issue and would really like your help tracking it down. If you run in to it I would be happy to jump on the phone with you and preferably do a screenshare as well. If you want to run some tests for me, this is what may help us track it down:
0. Please make sure you are updated to the latest version of Premiere Pro and AME, which at this time are Premiere Pro 7.2.1 and AME 7.2.
1. Simplify the project. Create a copy of the project and eliminate anything in the project that isn't related to the sequence(s) you are exporting. Then run the encode again. If it still occurs, move to the next step. If it doesn't occur any more, repeat step one and only remove half of the unused items (sorry, this is giong to be a manual process). Rinse, repeat.
2. Open your sequence in Premiere and press Cmd/Ctrl + A to select all clips in your sequence. Right click and select Remove All Effects. Export again. No repro? Go to step 4. If it still repros, go to step 4.
3. Make all the media offline. Export again. No repro? Go to step 4. Repro? Go to step 5.
4. Send me a message with as much detail as possible. Even better would be if you could provide me a copy of your project file.
Your help in tracking this issue down is greatly appreciated. Thank you. -
How i can insert videos, export to pdf and then watch the video? i can't
How i can insert videos, export to pdf and then watch the video? i can't. It is suposse that i have to configurate the option save but i don't know how... any help?
Fron the Pages Help menu:
Using Sound and Movies
You can add audio—a music file, a playlist from your iTunes library, or any other sound file—to a Pages document. You can add video that plays within a page.
Pages accepts any QuickTime or iTunes file type, including the following:
MOV
MP3
MPEG-4
AIFF
AAC
Also note that some media files are protected under copyright law. Some downloaded music may be played only on the computer where the download occurred. Make sure the computer you are using has permission to play all the media files included in your document.
When you add media files to your document, make sure that they will be available if you transfer your document to another computer. When saving your document, make sure the option “Copy audio and movies into document” is selected in the Save window. (If you don’t see the option, click the button next to the Save field to display the entire Save window, and then click the Advanced Options disclosure triangle.) -
Upgraded both my MBP Retina 15" and iMac 27" to Mountain Lion.. and on both, my FCP X (verion .4) has crackle sounds when i export the clips and play them back..
weird.
anyone else notice this? how do i resolve this?
ThanksCould be a few things. Let's start with the specs of the audio files.
-
Saved project only produces video and no audio
I created a simple project with ony one AVI file. I applied a single effect -- rotating the video from the portrait mode in which it was shot to landscape mode. When I play the project in Premiere Elements v. 9 there is audio as well as video. But when I export the project to an MPG or AVI file there is only video and no audio. What could be the problem?
P-Elements 9 http://help.adobe.com/en_US/premiereelements/using/index.html
>should not require its users to dig into the esoterica of codecs
Just as soon as you convince every camera vendor in the world to create video that uses only one codec, at only one set of parameters, you will be able to use software that works exactly the same for all files
Until then... you really do need to know what you have so you may tell the software what to do with what you have
You can't shove a slice of bread into a DVD player, and you can't put a DVD in a toaster (unless you want a mess in either case)
>Multiplexing was already set for DVD
In that case, you are getting exactly what you requested... a video file with no audio, and a separate audio file -
After effects CC export to premiere pro CC: audio doesn't match
Hello!
I am making an animation serie for Belgian TV. They need me to export only my audio from premiere (I make the animations in after effects).
They need OMF format.
When I export from after effects CC > Premiere pro project (only to export my audio to OMF from here) the audio doesn't match.
Adobe media encoder doesn' support OMF unfortunately.
Example; if I stretch the audio time in after effects, premiere doesn't.
I am really stressing out and any help would be very welcome
Thank you!
EllenHello Jim
Thanks for the reply!
When I import my after effects composition into premiere, it is perfectly visible and the audio is correct.
But now it is suddenly impossible to select > export > OMF
Do you know why this is?
Thanks! -
Editing and saving audio files (as audio files)
I am trying to accomplish the following tasks. Can anyone help?
1. Fade into and out of a section of audio file.
2. Save an audio file as an audio file. Although QT said it could export in dozens of formats, I can only manage to find "Save As Movie"
I am trying to make a slideshow (I can do that) and add audio (I can sort of do this), but it's not very graceful because I can't edit the audio very well.
Thanks!Do you have QuickTime Pro? What "audio file" types are you referring to - MP3, WAV?
-
"The source and output audio channels are not compatible or a conversion does not exist" - ?
I'm trying to export from Premiere Pro for a f4v file that matches all source settings except resizing the video. I've done this a million times but today, when I hit EXPORT, I'm getting an error message from Adobe Media Encoder that says "the source and output audio channels are not compatible or a conversion does not exist." I'm using wav, mov and mts files in my audio tracks and everything plays happily in the timeline. Any ideas?
Thanks for any help!Sounds like you unsuccessfully trying to output a 5.1 Master to a stereo or mono file. Or something along those lines.
-
Quicktime Export looses links and controls
Hello, I've done a little keynote presentation with only 4 slides, the first page is the intro with 2 links, the first link takes you to slide #2 where I have a little quicktime movie in mp4, there are 2 more links on the bottom, one takes you to the intro page and the other one takes you to slide #3 where I have some text that I've typed.
I click the play button on keynote and everything works fine, 100%.
After I export the job to quicktime I get a .mov, I open it and the intro looks fine, I click on the link that takes me to page #2 where I have my video and the controls are missing, so it doesn't look as it did in the preview.
When I click on the link that takes me to the intro something weird happens and automatically the slide goes back to the video.
If I click to go to the 3rd page with the text it does the same thing.
If on the intro page I avoid to click the link for the video page, and I click the link that takes me to page #3 with the text everything works fine.
The presets for quicktime are Manual Advance and Full Quality Large and Include Audio etc...
Is this a bug or I'm doing something wrong?
ps. if I export the same exact job but without the video all the links work fine.
ThanksQuickTime Pro can't export audio from muxed track formats (MPEG 1 or 2 and Flash).
If the file "plays" using QT Player you can use Pro to save it in a .mov "wrapper" and it will play as intended but will not reduce in file size.
You could export the video portion of the .swf format but it will probably increase in file size (even at smaller dimensions). You could also use a tool like WireTap to "record" the audio and add it back into the QT Pro export.
Maybe you are looking for
-
I updated my iphone 4s on my computer - I lost a lot of pictures - it gave me messages that I had sent back in June and now it wont allow me to play any of my itunes on my phone - any got any solutions to what I should do? HELP
-
Playing a wav file (byte array) using JMF
Hi, I want to play a wav file in form of a byte array using JMF. I have 2 classes, MyDataSource and MyPullBufferStream. MyDataSource class is inherited from PullStreamDataSource, and MyPullBufferStream is derived from PullBufferStream. When I run the
-
Unable to see process activities in component palette
Hi I am unable to see the diagram view of BPEL(Even after successful migration from 10.1.2) I am using 10.1.3 JDev I am unable to see Process activities list in the componenet palette Can anybody help me ... Thanks -Praveen
-
I'm confused that the window check box "photoshop live 3d" is missing in AE CS6.. then how will we import a 3ds/obj (psd) with its 3d property?
-
Unavailable or Initialization problem when viewing the servlets from admin console
Hi I am on Weblogic 5.1.0. I connect to myServer which comes configured by default. When i see the registered servlets inside HTTP, on the console i see Unavailable or Initialization problem on every servlet that i select. Also when i try to load the