Exporting to QT interactive, hyperlinks dead until audio/video stops
Keynote v3.0
I am making a simple presentation for export to Interactive Quicktime.
I have only 3 slides
1) A menu with hyperlinks to the other 2 slides
2) A slide with a QT movie
3) A slide with mp3 audio
Each of the media slides has a hyperlink back to the menu. When previewing in Keynote, as expected the link back to menu stops the video or audio playing and goes back to the menu.
Butwhen I export to interactive or hyperlink only QT, while the video or audio is playing the hyperlinks and/or spacebar do not work until the media has finished playing.
An alternative for me would be to publish to flash, but then neither the video nor audio actually play
Can anyone help please?
I noticed this in Keynote 2. I have no idea how to fix it, but I KNOW QT supports it because Apple's previous theme demo on the iDVD page (it's gone now) was a QT movie and you could interrupt it by clicking another button.
Similar Messages
-
Getting Audio to stop when swiping within an article?
I have an audio clip that a user can play on a particular page within an article. I'd like the audio to stop playing if the user decides to continue on in the article (swiping down, not left or right). Is this possible? Selecting "stop audio on page turn" only stops it when swiping left or right to the next or previous article.
Has anyone found a fix for this?
Thanks,
Christopherif you autokplay a transparent & silent audio of only one secnd any other
audio/video stops because the iPad can only play one media at a time.
—Johannes
(mobil gesendet) -
Audio/video out of sync after export
My son Charley and I are working on a simple project, where we have imported an MP4 file into Premiere Pro, then edited it, with no problems, but when he exports the file (either to an MP4 or FLV), there is a small but noticeable audio-video sync problem on the exported file. There does not seem to be a sync or other problem with the source file, nor with the edited file as viewed within PP. But on the exported file, the audio seems to run slightly ahead of the video.
When we upload one of these exported files to Youtube or Vimeo, the sync problem seems to become more noticeable than in viewing the exported flv or mp4.
We cannot find a solution in searching the Forums. Charley consulted with another more experienced videographer, and they tried for hours to no avail.
Charley is using Premiere Pro CS5.5 on a Mac (MBP Mid-2009 2.53 Ghz Intel Core 2 Duo, using OSX 10.6.8).
We see lots of discussion about frame rate. Charley put the settings to 'match source' but maybe there is something else we're supposed to do.
He can post screen shots of all the settings, if that will help. Adobe provides no phone support for PP and just sends us back to this Forum.
Any help much appreciated.
Michael LanningKevin: OK, that's helpful. Charley is at work until 3:15 Eastern; in the meanwhile, I'm trying below to reply to your inputs; sorry if some of my questions are illogical, just reflecting my confusion.
You say to match source settings, including audio sample rate, and (I think) that we should do that by creating a new sequence at which time we select the clip and drag it to New Item button. Perhaps doing that would make some of the following questions irrelevant, I'm not sure, but here they are:
We did not check the box "Match Sequence Settings" (just under 'Export Settings'); should we have done so?
On Presets, and using FLV vs H.264:
Do we need to leave the 'Match Sequence Settings' box Unchecked if we want to use a YT or Vimeo Preset?
FLV does not seem to have a pre-set for YT or Vimeo, but does have one for 'Web.' H.264 does have YT and Vimeo pre-sets. As I've mentioned, we have been trying to make this work with FLV, as Charley found that H.264 was giving us (worse) sync problems. Maybe we should go back to H.264.
You say that "if these things don't work, "...try an similar H.264 preset to upload to" YT. Do you mean to suggest that we try exporting in H.264 instead of FLV? (If that's not what you mean, and if we still work with FLV, then I don't know what "an similar H.264 preset" would be; do you mean like the 'Web' preset?
Whether FLV or H.264, I'm unclear how ensure audio sample rate matches source.
Codecs listed on source file are H.264, AAC; does that imply that under 'Basic Audio Settings' on Audio settings tab, we should use an AAC codec rather than the MP3 now indicated?
Should we be determining the bitrate settings of the source (ie, right click the file within PP to find the properties, including bitrate?) and then using that bitrate?
Or do we resolve all this about audio sample rate simply by creating a new sequence as discussed above?
I hope these questions make sense. Thanks again for your help. -
How do I fix my audio/video in iChat 4.0.9? it has worked perfectly until last night.
How do I fix my audio/video in iChat 4.0.9? it has worked perfectly until last night. I have been having video calls iChat with my granddaughter for 4 weeks. All of a sudden last night I wasn't able to complete the video/audio. We were able to iChat with writing. The message I got was to go to connection doctor.
The error log -
2011-04-24 19:33:43 -0400: No data has been received for the last 10 seconds.
Audio channel info: local machine using 10.0.1.2:16402, expecting remote machine to send to 69.138.244.124:58521
Video channel info: local machine using 10.0.1.2:16402, expecting remote machine to send to 69.138.244.124:58521
Every time we tried to connect I got the same error message.
I use an airport extreme - my granddaughter has some kind of wifi - but the error was on my side not hers as she connected to her friends.
Please help.
Thank you.Hi - I have a cable modem from comcast.
I am not sure I understand all your questions, suggestions - so I will copy what I have when I go into the airport utility under internet.
Do you have four tabs (You may have less) I HAVE 4 TABS
In the First tab what does it read at the Bottom ? AT THE BOTTOM OF THE FIRST TAB (INTERNET CONNECTION) IT DOES SAY "SHARE A PUBLIC IP" WHEN I LOOK AT THAT SETTING - I COULD CLICK INSTEAD BRIDGE MODE OFF, OR DISTRIBUTE A RANGE OF IP ADDRESSES. BUT FOR NOW THE ONE THAT IT IS ON IS THE SHARE A PUBLIC IP.
"Share a Public IP" ?
Or "Bridge (Off) Mode" ?
I DON'T UNDERSTAND WHERE TO LOOK FOR THE INFO BELOW. I ALSO HAVE UNDER THE INTERNET CONNECTION TAB - CONNECT USING ETHERNET AND ETHERNET WAN PORT AUTOMATIC (DEFAULT)
THE 2ND TAB IS TCP/IP AND THERE IT LISTS CONFIGURE IPv4: USING DHCP
IP ADDRESS: 69.138.244.124
SUBNET MASK 255.255.248.0
ROUTER ADDRESS 69.138.240.1
DNS SERVER 68.87.73.246 AND 68.87.71.230 (THESE ARE FILLED IN THE BOXES AND NOT CHANGEABLE.
THE 3RD TAB IS DHCP
DHCP BEGINNING ADDRESS 10.0 .1 .2
DHCP ENDING ADDRESS 10.0.1.200
DHCP LEASE IS 1 THEN DAY
4TH TAB NAT
CHECKED IS ENABLE NAT PORT MAPPING PROTOCOL
I HAVE BEEN USING THIS AIRPORT EXTREME FOR AT LEAST ONE YEAR.
THE ONLY DIFFERENT ISSUE IS THAT I HAD BEEN TRAVELING AND USED MY DAUGHTER'S AIRPORT EXTREME LAST WEEK. I HAVE NO IDEA ANY OF THAT INFO - BUT I DO KNOW THAT THE AIRPORT EXTREME LISTED IN THE UTILITY IS THE ONE AT MY HOME THAT I AM WITH NOW.
THANK YOU FOR TAKING THE TIME TO TRY TO HELP ME. I REALLY APPRECIATE IT.
JUDY
Between that drop down and the tabs should be the info on how it connects to the Modem.
It may list that Puiblic IP.
It may list another LAN IP (one from the Modem)
Does it start 192.168....
Or 172.16 (or up to 172.32....)
Or possibly another 10.... number ?
If the modem is issuing IPs to the LAN there are two things that can effect things
One is the fact the computer gets two IPs (even though the mac can only display one)
And If you used Port Forwarding in the Modem the Place (IP/Computer or device) that it was pointing to may not be the Airport Base Station any more. -
How to create an interactive pdf, hyperlinking text to a video on a usb drive?
Creating an interactive pdf in InDesign CS6, hyperlinking text to a video. Both pdf and video placed on a usb thumbdrive. When clicking link on Mac a warning box came up, but after clicking Allow the video played fine. On PC the warning box also came up but clicking Allow did nothing
You'll need to use startDrag and stopDrag in order to be able to move an object (the slider handle). You will need to specify a rectangle that has 0 height for the drag limits. The width of that rectangle will define the maximum value of the scroll (which will be the maximum value of your scale.
Assuming you will have a linear scale for values along the drag line, the math is fairly easy to manage. The x property of the handle at the minimum slider position should be 0. You use the ratio of the current x position of the slider handle to the full width to determine what value to assign ( ex: ratio = handle.x / rectangleWidth). So if the minimum value is 1K and the maximum value in 10K, you essentially have 9K represented by the length of the line, so the value provided by the slider position at any point along that line would be 1K + (ratio * 9K)
You can use a MOUSE_MOVE event listener that you assign when the slider's MOUSE_DOWN event occurs to update the textfield as the slider is moved. You can remove the MOUSE_MOVE listener when the slider's MOUSE_UP event occurs.
So, in summary, you need to look into the startDrag and stopDrag methods, which will be inititiated using MOUSE_DOWN and MOUSE_UP events, respectively. The MOUSE_DOWN event will create a MOUSE_MOVE listener that you will use to have a function continually update the textfield value displayed, while the MOUSE_UP event will have that MOUSE_MOVE listener removed. The ratio of the x property of the slider to the total slideable distance will be used to determine the current value that the MOUSE_MOVE event handler assigns to the textfield display. -
After exporting to Encore, no audio/video transitions
I used keyframes to create audio/video fade-ins and fade-outs between chapters. It looked perfect in Premiere. I then went to File > Export to Encore. Let it render for 3 hours. Then the resulting m2v/wav combination in Encore doesn't show any evidence of the audio transitions that I had created. This happened for 4 different 2-hour videos I am trying to make. What am I doing wrong?
If you set the work area bar to span one of the problem transitions and then export that work area to a DV AVI file, when you play the exported file in an external media player do you hear the audio transition?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
i make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!
What you could do now is break up your video into smaller parts and render them out, then assemble them again as a whole.
I know this is not the best fix, but it might work.
You can duplicate an edit in the main screen, then delete the last bits and export,
do the same for the other half.
Then import the two bits (or more if you need) in a new edit.
Out of curiosity, can you post what format the video is in?
Copy a video straight from the camera to your computer.
Open it in Quicktime player, and with out playing type Apple + i
or Control + i for PCs
It should tell you lots of info about the video, and might help us to see what is wrong.
This is what it looks like: -
I try now for hours to export an MXF op1a with 8 channel audio from Premiere CC2014.1 and with AME 2014.1 to copy the file on my XDCam drive u1 to a disc.
The file is always asynchronous after 20 or 30 minutes. The project is synchronous and also other codecs are synchronous if I export them. So I think it's a bug...
I use the newest Sony XDCam drivers. Also parts with no audio can't be render with intelligent render. If I use this option, Premiere or AME crashes...
I work on a mac system with 10.8.5 OSX.
Does anybody have the same problems or any ideas to solve my problem...
Best regards,
FlorianThe following will answer both your questions a) and b).
Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
Then just go down through your music and effects audio tracks and assign them accordingly.
Now, when you export your timeline as a self-contained media file, it will have different audio channels.
I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are. -
Audio/Video out of sync when exporting to MPEG4
I am working on a project that is being edited on FCP 5.1.4
Anyhow, there is problem when exporting to MPEG4- the audio/video is out of sync.
Sequence settings show 29.97 editing base with 48 mhz sound, which is the same as the MPEG 4 settings, but they are not in sync. Anyone encounter this problem? I've never had this problem before previously.
Thanks
CaitlynHi Harm,
last time you suggested the same but I wouldn't know how to take the BM card out of the equation. I only have on station. If I export to Beta SP there is no problem. -
Why is Premiere Pro telling me it will take over 24 hours to export a 55-second clip with no audio or effects? It's never done this before, but this is driving me nuts. I'm almost finished with this project, I can't have this kind of stuff happening now.
Forgive me. I'm just stressing hardcore at the moment.
Specs:
OS X 10.9.4
2.8 GHz intel
Premiere 5.5
exporting cell phone video which has been treated with effects and layered with other clips from cell phone video, then nested as one single video clip, now trying to export as H.264 (DV 24fps)
Full disclosure: I am an amateur so if you need more info just tell me and I'll produce it if I can. I should note though, I've done this before with no problem. However the settings may have been different (still getting the hang of the whole 'settings' thing, to be honest). It's very possible that the problem in this case is the operator, in other words. -
Do we have any way to let QOEMatrics db to store media info of every sessions(including IM,sharing)?
Ref:Lync 2010 SQL reporting databases and tables.The following types of content are not archived with Archiving Server:
Peer-to-peer file transfers.
Audio/video for peer-to-peer instant messages and conferences.
Desktop and application sharing for peer-to-peer instant messages and conferences.
For the detailed information, see
http://technet.microsoft.com/en-us/library/jj204900.aspx
Lisa Zheng
TechNet Community Support -
Use FMS & Actionscript to Stream Audio/Video and control (powerpoint) slides
Hi there,
My compnay provides webcasting services to numerous clients, and we currently use Windows Media Encoder as our base software for these projects.
However, I'm interested in switching to Flash Media Server, but need to figure out one issue and how to implement it in such a way like how we are currently using Windows Media Encoder.
We need a way to stream out a live audio/video feed AND have a way to control a presenter's POWERPOINT slides and have them advance by our command when streaming live.
Basically, the way we do it is we will stream out audio/video from WME and also use the encoder's SCRIPTING functions to send out a "url" from the encoder to the actual page in which the viewer is watching the live embedded stream. On that page is an embeded/internal frame which we can specify (using the id/name) that the url gets loaded, and this actually advances the slides (or more so pulls up a pre-created html page of the next slide in the person's powerpoint, which is actually a screenshot or exported image of that slide and embedded within a specific HTML file and hosted on the same server as the embedded player/html file)
Would there be a way to send out this same type of script using FMS? I've been playing around with it and notice the interface itself does not have a built in scripting function like Windows Media Encoder does. However, I did read somewhere that it supports ActionScript... but I have no clue how to implement this feature.
I am just curious how it might be able to go about doing this? Is there a way to use an [action]script with FMS and have it send out a URL to a specific frameset embedded on the same page as the Flash Media Encoder Playback?
Hopefully this make sense and that someone can point me in the right direction. Switching to FMS over Windows Media Encoder is the way I would love to go, just need to figure out how this could be done.
Would a better method be converting the powerpoint slides to a swf or flv file, embedding that file within the same page as the FMS playback, and somehow using a script to "advance" the frames/slides/scenes within that file?
I also heard something about Flash "Shared Objects" and how this could be a way of controlling a swf file remotely.....
Could anyone give me some advice and know a method that I could use to achieve this type of implementation?
Any help is GREATLY appreciated! Thanks!FMS (the interactive version, FMIS) has complete scripting support.
What you want to do can be done with FMS, and there are a lot of ways you can approach it. Converting to .swf can be helpful, as it means you have a single resource to load rather than a bunch of individual slide images (the flashplayer can load .swf, jpg, gif, png). Rather than embedding, I'd opt to make it an external resource and load it at runtime... that would keep the player application reusable.
To get an idea of how to use server side actionscript, see the getting started portion of the FMS 3.5 dev docs
http://help.adobe.com/en_US/FlashMediaServer/3.5_Deving/
Then, see the SSAS docs for the following classes in particular:
The Client class for Client.call()
The Stream class for Stream.send()
The Shared object class
The Application class for BroadcastMsg()
The docs give some general overview for the usage of each. The best choice really depends on your deployment architecture and scalability requirements. -
IDVD 08 audio/video sync drift toward end of DVD movie - fix/workaround?
Anyone know how I can fix this issue? It's driving me crazy.
I've just spent a few evenings in iMovie 08, editing together the video of my son's birth. All looked & amazingly good in iMovie. The "Large" .m4v file output by iMovie - Shared with the Media Browser - plays perfectly in Quicktime too.
However, after adding that shared movie to iDVD 08, and burning a DVD, I noticed that the audio sync drifts toward the end of the Movie when plated back. At the start of the DVD all seems well, but by the end of the ~1hr 20 minute movie the audio is unbearably out of sync with the video. Completely unwatchable.
After a little Googling I came across some reports that iDVD might not deal well with video that's been recorded with 12-bit audio. I've confirmed that my camcorder is (was!) set to 12-bit rather than 16-bit (the default, I'm sure). So if that's the problem I'm hosed... it's not like I can get a retake on that footage
Is there a reasonable workaround for this issue? I'm obviously unable to re-take the video (or the other 10 hours of DV video tape I've yet to use in an iMovie project). Ideally I'd like Apple to release a patch for this. Shouldn't it be possible for iDVD to account for audio that was originally recorded in 12-bit... even if it's just a checkbox you have to select to tip it off?
Then again, perhaps this is totally unrelated to the 12-bit issue, and this is just a run of the mill bug?
As I said... iMovie generates a MPEG4 video file of the Movie that looks/sounds perfect, so it seems this sync issue's being created somewhere in iDVD as it's rendering the audio/video to burn to the DVD...
Thanks in advance.I've tried most of the options I can think of, and the audio sync drift issue continues on this ~1hr 12 minute iMovie/iDVD 08 project.
A couple of promising ideas tried used QT Pro, to export the audio track from the iMovie generated MPEG-4 file - as a WAV file, resampling to 48kHz and 16-bit... then Adding this back to the video track in the MPEG-4 file (having deleted the original audio track). In another test I also tried the Add to Selection and Scale option. Oddly enough I think the Add to Selection and Scale attempt generated more sync issues than before in the final DVD movie... so I stuck with the MPEG-4 file containing the video track and the added, resampled at 48kHz & 16 bit, WAV audio track.
This was saved as a self contained Movie file, producing a QT .mov file. I moved this .mov file into the iDVD projects directory structure so that it was avalable in iDVD's Media Browser. I then reworked the iDVD project to use this QT large.mov file, instead of the original iMovie large.m4v file.
As a reminder... the original large.m4v file has the following properties:
29.97 FPS H.264 Decoder, 960 x 540, Millions
AAC, Stereo (L R), 44.100 kHz
0:01:12:07.16 duration
The resampled and saved QT MOV file has the following properties:
29.97 FPS H.264 Decoder, 960 x 540, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
0:01:12:07.16 duration
BOTH versions of this Movie file play flawlessly within QT Pro... there's no audio sync drift evident toward the end of the movie unless I use iDVD 08 to burn either movie file to a Physical DVD (or DVD Disk Image). In both cases the resultant DVD Movie exhibits significant audio sync drift as the ~1hr 12 minute movie progresses. The sync goes out by ~ <= 1 second based on a rough visual assessment.
I've not yet tried to burn either the original iMovie produced MPEG-4 video file or my QT Pro tweaked audio track .MOV file version to a DVD on my PC...
... But I have used an application called Burn (referenced in this earlier/archived iDVD sync drift forum post: http://discussions.apple.com/thread.jspa?threadID=1332100 by user F Shippey - http://burn-osx.sourceforge.net/) to take the QT Pro tweaked .mov file version of the original MPEG-4 file and burn it to a DVD...
Results:
The Burn app burnt DVD plays with NO audio sync issues!... Even though it was generated from the same audio tweaked (48kHz/16-bit resampled) QT Pro .mov file.
However, whenever I burn a DVD using iDVD 08 the audio sync gradually drifts. It matters not whether I use the original iMovie 08 generated MPEG-4 movie file, or the QT Pro version of that file with the resampled audio track (the same one that works fine with Burn).
It sure looks to me like iDVD has a problem... Again, refer to http://discussions.apple.com/thread.jspa?threadID=1332100 for someone else who seems to have run into similar challenges.
Am I overlooking something?
Thanks in advance. -
'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer
I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence? -
Audio & video don't match on burned blu-ray
Thanks to everyone on this forum, I was able to solve the blue screen of death issue!
Now a new problem: I successfully burned a blue ray. The menus work well and the picture is great, but the audio is about 20 seconds ahead of the video on all tracks. This problem only occurs on the finished blu-ray disc. In preview, the audio and video match perfectly.
I am using Encore version 6.0.1.13
Does anyone have this issue?
Here are my blu-ray drive and system details:
Here are the blu-ray drive specs:
Logitec USB 2.0/3.0 Bus powered portable bluray drive unit, LBD-PME6U3VBK
PIONEER BD-RW BDR-TD05 USB Device
Driver: 6.1.7601.17514
C:\windows\system32\DRIVERS\cdrom.sys
\windows\system32\Drivers\PXHlpa64.sys
\windows\system32\DRIVERS\tdcmdpst.sys
\windows\SysWOW64\drivers\Afc.sys
Renesas USB 3.0 driver also installed
The computer specs are as follows:
Manufacturer: Toshiba
Manufacturer Part Number: PSAY1U-05U027
Product Line: Satellite
Product Series: P755
Product Model: P755-S5375
Product Name: Satellite P755-S5375 Notebook
Product Type: Notebook
Processor Manufacturer: Intel
Processor Type: Core i7
Processor Model: i7-2670QM
Processor Speed: 2.20 GHz
Processor Core: Quad-core (4 Core)
Cache: 6 MB
Chipset Manufacturer: Intel
Chipset Model: HM65 Express
Standard Memory: 4 GB
Memory Technology: DDR3 SDRAM
Memory Standard: DDR3-1333/PC3-10600
Number of Total Memory Slots: 2
Hard Drive Capacity: 500 GB
Screen Size: 15.6"
Display Screen Type: Active Matrix TFT Color LCD
Aspect Ratio: 16:9
Screen Mode: WXGA
Backlight Technology: LED
Screen Resolution: 1366 x 768
Graphics Controller Manufacturer: Intel
Graphics Controller Model: HD 3000
Graphics Memory Capacity: 1.65 GB
Graphics Memory Accessibility: Shared
Ethernet Technology: Fast Ethernet
Wi-Fi: Yes
Wi-Fi Standard: IEEE 802.11b/g/n
Webcam: Yes
Operating System: Genuine Windows 7 Home Premium with SP1
Operating System Architecture: 64-bit
Pointing Device Type: TouchPad
Number of Cells: 6-cell
Battery Chemistry: Lithium Ion (Li-Ion)
Width: 15.0"
Depth: 9.8"
Weight (Approximate): 5.40 lb
Package Contents:
Satellite P755-S5375 Notebook
Lithium Ion Battery
AC Adapter
Green Compliant: Yes
Green Compliance Certificate/Authority: RoHS
Installed programs:
Name Version
Microsoft Application Error Reporting 12.0.6015.5000
Microsoft Office Click-to-Run 2010 14.0.4763.1000
Microsoft Office 2010 14.0.4763.1000
Windows Live Essentials 15.4.3502.0922
Apple Application Support 2.1.7
Windows Live Writer 15.4.3502.0922
Microsoft_VC90_MFCLOC_x86 1.00.0000
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148 9.0.30729.4148
TOSHIBA Web Camera Application 2.0.3.3
Windows Live Messenger 15.4.3538.0513
Microsoft_VC90_CRT_x86 1.00.0000
Google Toolbar for Internet Explorer 1.0.0
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219 10.0.40219
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.61000
Microsoft SQL Server 2005 Compact Edition [ENU] 3.1.0000
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219 10.0.40219
Toshiba Online Backup 2.0.0.31
TOSHIBA ReelTime 1.7.21.64
Windows Live Remote Client Resources 15.4.5722.2
Windows Live SOXE Definitions 15.4.3502.0922
Adobe AIR 3.1.0.4880
Windows Live Mesh ActiveX Control for Remote Connections 15.4.5722.2
Windows Live Communications Platform 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
Apple Software Update 2.1.3.127
Windows Live UX Platform Language Pack 15.4.3508.1109
Windows Live Photo Gallery 15.4.3502.0922
bl 1.0.0
Windows Live Mail 15.4.3502.0922
Java(TM) 6 Update 25 6.0.250
MSVCRT_amd64 15.4.2862.0708
TOSHIBA Face Recognition 3.1.17.64
ph 1.0.0
Adobe Widget Browser 2.0.348
Windows Live Writer 15.4.3502.0922
Mesh Runtime 15.4.5722.2
TOSHIBA Supervisor Password 1.63.51.2C
Adobe Acrobat X Pro - English, Fran軋is, Deutsch 10.1.1
Adobe Reader X MUI 10.0.0
TOSHIBA Media Controller Plug-in 1.0.7.5
Windows Live Photo Gallery 15.4.3502.0922
Windows Live Photo Common 15.4.3502.0922
Label@Once 1.0 1.0
PDF Settings CS6 11.0
Toshiba Book Place 2.2.7530
Windows Live PIMT Platform 15.4.3508.1109
TOSHIBA Wireless LAN Indicator 1.0.5
D3DX10 15.4.2368.0902
Utility Common Driver 1.0.52.3C
Junk Mail filter update 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
TOSHIBA HDD/SSD Alert 3.1.64.9
Windows Live Remote Service 15.4.5722.2
Toshiba App Place 1.0.6.3
Windows Live Mesh 15.4.3502.0922
Windows Live Language Selector 15.4.3538.0513
QuickTime 7.72.80.56
Renesas Electronics USB 3.0 Host Controller Driver 2.0.34.0
TOSHIBA Value Added Package 1.6.1.64
Microsoft_VC80_CRT_x86 8.0.50727.4053
Google Update Helper 1.3.21.111
TOSHIBA HDD Protection 2.2.2.15
7-Zip 9.20 (x64 edition) 9.20.00.0
TOSHIBA PC Health Monitor 1.7.9.64
Windows Live Mail 15.4.3502.0922
Adobe Help Manager 4.0.244
MSVCRT 15.4.2862.0708
Windows Live Remote Client 15.4.5722.2
Blackmagic ATEM Switchers 3.0.1.0
Microsoft_VC90_MFC_x86 1.00.0000
Windows Live Photo Common 15.4.3502.0922
Windows Live ID Sign-in Assistant 7.250.4232.0
Microsoft Visual C++ 2005 Redistributable 8.0.61001
Windows Live Messenger 15.4.3538.0513
Windows Live Mesh 15.4.3502.0922
Windows Live Writer 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 9.0.30729
TOSHIBA Hardware Setup 1.63.1.37C
Microsoft Silverlight 4.0.50401.0
PlayReady PC Runtime x86 1.3.0
Intel(R) WiDi 2.1.41.0
Windows Live MIME IFilter 15.4.3502.0922
TOSHIBA Flash Cards Support Utility 1.63.0.12C
TOSHIBA eco Utility 1.3.5.64
Windows Live UX Platform 15.4.3502.0922
TOSHIBA Wireless Display Monitor 1.0.1
Debugging Tools for Windows (x64) 6.12.2.633
Windows Live Remote Service Resources 15.4.5722.2
Windows Live Writer Resources 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17 9.0.30729
Intel(R) PROSet/Wireless WiFi Software 14.01.1000
Windows Live Installer 15.4.3502.0922
TOSHIBA Disc Creator 2.1.0.11 for x64
PlayReady PC Runtime amd64 1.3.0
Windows Live SOXE 15.4.3502.0922
Java Auto Updater 2.0.4.1
TOSHIBA Bulletin Board 1.6.08.64Well, I am at the limit of being able to help, since I only write to DVD
But, if your video is showing as being untranscoded, I would agree that "something" is going wrong while transcoding
If you click on the 622722 link I provided, you "should" be able to figure out how to export out of Premiere Pro to create a file that Encore does not need to transcode
Otherwise, you'll have to wait for someone who uses assets like yours to create a BluRay to come along and, hopefully, point out what you need to change
These may not help, but they are a couple of links I saved about audio/video sync problems
Fix for audio out of Sync on Export http://forums.adobe.com/thread/955524
-and http://forums.adobe.com/thread/436751?tstart=120
Maybe you are looking for
-
i had my Itunes account disabled due to fraud, if i create a new itunes account how can i switch purchases and apps to the new ID?
-
HP Officejet Pro 8500A not printing from black cartridge
This happened in an instant-no warning. I have tried all known troubleshooting and have disconnected. The cartridge is one month old - no error messages.
-
When to use the "Process Fields"?
Hi, I have a simple form with some text fields and a couple of Signature fields. All is working fine in the WorkSpace. The Process / Workflow is also simple, Initiator --> User --> User. But I want the user to be able to submit the form outside of t
-
File sizes displayed in Bytes?....
Since upgrading to Lion, when I try getting info on a folder/file, the size used on the disk or filesize is displayed in Bytes (with GB's in parantheses afterwards). This seems unintuitive to me and makes it a little less easily apparent what the fil
-
Adobe Creative Cloud Student and Teacher Edition prepaid card invalid?
We purchased a 12-month prepaid membership at the Student Store today as staff and tried to redeem it at home but the code constantly showed up as invalid. Is there currently something wrong with the redemption system? The lady at the register activa