Exporting to Quicktime seems to take a long time

I am in the process of exporting a movie to Quicktime using expert settings. The size I selected was 640x480. The movie 19:35 long. It has processing now for about 1/2 hour. The process bar says it still has 123 minutes to go. Is this normal, or am I doing something wrong?
This is just movie footage there are no added audio files, or any still picture files.

Sorry, yes, that's pretty normal.
It IS a slow process.

Similar Messages

Iphone seems to take a long time to charge when plugged in to USB

Hi MyIphone seems to take a long time to charge when plugged in to USB. Is this normal? Less power coming from the Laptop than wall plug?

Wow.. this completely amazes me. USB is 5v. Some computers (especially laptops) will shut off power to USB devices when the computer enters power saving mode. Very few will lower the power (since this could actually damage a device). I have noticed no difference in charge time between USB and the wall plug (I use the wall plug mostly when I travel, and USB at home). The only difference I can see is the wall wart puts out slightly more amperage then a USB port.

Firefox 5 seems to take a long time to download ...is that right...I mean...more than 5 min...I finally stopped the download...

i got the download bar then it never seemed to go away..how long should it take to download firefox 5....it's never taken that long..I had to stop it after 5 minutes or so

peterjm wrote:
I checked all of the steps in #D2 of the Troubleshooting Guide.
One other thing thing you might try, is a +*Verify Disk+* (not permissions) on your internal HD. That will not take anything like 40 hours! If it reports problems, you'll have to boot from your Install disc and use it's copy of DU to repair it. Post back if you need to do this but aren't sure how.
I think it's very fishy that Repair Disk took 40 hours -- it seems like any operation that touches the hard drive on the Time Capsule takes a long time. Maybe the hard drive is having problems? What sort of problems could a drive have that would make everything VERY slow, but still successful?
Try connecting via an Ethernet cable; see what effect that has. Everything should be faster, of course, but not wildly. Just as an example, I'm doing backups to a USB hard drive via my Airport Extreme, about 15 feet from my iMac. When I first started that way, I did a full backup via Ethernet (about 21 gb/hour), then erased it and ran again wirelessly (about 12 gb/hour).
Even 5 feet apart, you may have some sort of interference or other communications problem; if Ethernet is many times faster, then you may need to have your TC and/or wireless card examined.

Time Machine Backups Seem to take a long time

I'm running OS X 10.5.8 on a G5 iMac, and I've noticed some strange behavior recently when Time Machine does it's back ups. I back up to a LaCie external drive with a capacity of 465 GB and it currently has 65GB available. When Time Machine does it back ups, it seems to take a very long time, eventhough not much has changed. It might go for 30min to an hour. Sometimes the back up fails. I've tried to stop the back up, but that doesn't stop Time Machine, and also System Preferences becomes unresponsive. I can't quit or force quit System Preferences. I have to turn off the iMac to quit System Preferences by holding in the power button. I'm not sure if this is a Time Machine issue, or an issue with the external HD. I know the iMac is a bit dated, and due to be replaced. The HD is also at least 3-4 years old, and has only been used as my Time Machine back up. Any ideas on how I might fix this? Thanks!!

ELFritzen wrote:
I had problems verifiying and repairing the LaCie HD. At first the the computer would hang on "verifying" the HD. I finally got the HD verified by switching the on/off/auto switch on the HD from auto to on. At this point verification went quickly.
That doesn't sound good.
Try different port(s), cables, and combinations of the two (a plug that works fine in one port may not make good contact in another).
Do you have (or can you borrow) another HD you can try?
Or another Mac you can try with that drive?
As an extra measure, I tried to repair the HD, but again the program hung up and I had to reboot.
Just for future reference, there's no point to verifying an external HD -- just run Repair. They both do all the same checks. Starting with Verify on your startup drive makes sense, since, if there's a problem, you have to start from another source to repair it.

Pull large amounts of data using odata, client API and so takes a long time in project server 2013

We are trying to pull large amounts of data in project server 2013 using both client API and odata calls, but it seem to take a long time. How is this done
In project server 2010 we did this creating SQL views in both the reporting database and for list creating a view in the content database. Our IT dept is saying we can't do this anymore. How does a view in Project database or content database create issues?
As long as we don't add a field in the table. So how's one to do this with creating a view?

Hello,
If you are using Project Server 2013 on premise I would recommend using T-SQL against the dbo. schema in the Project Web Database for your reports, this will be far quicker that the APIs. You can create custom objects in the dbo. schema, see the link below:
https://msdn.microsoft.com/en-us/library/office/ee767687.aspx#pj15_Architecture_DAL
It is not supported to query the SharePoint content database directly with T-SQL or add any custom objects to the content database.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
Anyone had these issues?

Settings > General > Reset > Reset network settings

Export Import Client take a long time

HI, Gurus
I export client PRD to QAS by T-Code: SCC8 , background is finish spend time 15 Hours and then 
import at target client by STMS take a long time, now is over 20 hourse but status is running. 
database on QAS is growth 30%
I saw log 
/usr/sap/trans/log/PRDET00021.PRD 
at 10 last row 
4 ETW000 0 entries from RFIDPTPRVAL exported (900*). 
4 ETW679 end export of "R3TRTABURFIDPTPRVAL". 
3 ETW678Xstart export of "R3TRTABURFRR" ...
3WETW206 scrap char 0x0000 found in RFRR.โu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20AC
 1AETP000 R3trans received signal 11 from operating system. 
2EETP200 Export with errors, request will not be imported 
1 ETP150 MAIN EXPORT 
1 ETP110 end date and time : "20100127161434" 
1 ETP111 exit code : "13" 
1 ETP199 ###################################### 
how i can do ?.
stop transport , resolve and new export ?
or wait for finish transport.
PRD system is ECC 6.0 database size 243 GB ( 2 Client 800 is Pre-Production and 900 is Production) 
OS: Solaris RAM 64GB 
QAS ECC 6.0 OS: Solaris RAM: 16 G 
Thank for advise.

Hi,
do you still see the entry:
usr/sap/trans/log/PRDET00021.PRD
at 10 last row
4 ETW000 0 entries from RFIDPTPRVAL exported (900*).
4 ETW679 end export of "R3TRTABURFIDPTPRVAL".
3 ETW678Xstart export of "R3TRTABURFRR" ...
3WETW206 scrap char 0x0000 found in RFRR.โu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20ACโu20ACu20AC
1AETP000 R3trans received signal 11 from operating system.
2EETP200 Export with errors, request will not be imported
1 ETP150 MAIN EXPORT
1 ETP110 end date and time : "20100127161434"
1 ETP111 exit code : "13"
1 ETP199 ######################################
The signal 11 could indicate memoryproblems which are most likely to
appear when importing cluster or transparent table
A possible solution might be to delete the entries in the target client
before the import or otherwise to exclude the clustertable from the
client export and to transport it separately. Check note #68896 for more
information on these topics.
Table RFRR is a work table. Its content will be filled by the two
reports RFDRRGEN and RFKRRGEN (batch jobs) periodically. So you can
exclude the table from the transport. Please do it by using
 report RSCCEXPT (see note #70290 - see attachment).
After this you can start your export of the client.
If all is done, start the reports RFDRRGEN and RFKRRGEN to create the
table RFRR.
Note 718511 is also applicable here, you could clean up the scrap characters and then retry the export.
Kind regards,
Paul

When i save videos with quicktime player it takes really long like1062938127339 and keeps going up!!!!

When i save videos with quicktime player it takes ridiculously long

Hi Tim ..
Reinstall Safari 5.0.6 for Leopard
Then restart your Mac. Try Safari.
If it crashes again, uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Quit then relaunch Safari. From the Safari menu bar click Safari > Empty Cache
Right or control click the Safari icon in your Applications folder then click Get Info.
If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
edited by: cs

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 MacBook Pro (13-inch, Early 2011) (Technical Specifications)
 MacBook Pro - model: MacBookPro8,1
 1 2.3 GHz Intel Core i5 CPU: 2-core
 16 GB RAM Upgradeable
 BANK 0/DIMM0
 8 GB DDR3 1333 MHz ok
 BANK 1/DIMM0
 8 GB DDR3 1333 MHz ok
 Bluetooth: Old - Handoff/Airdrop2 not supported
 Wireless: en1: 802.11 a/b/g/n
 Battery Health: Normal - Cycle count 250
Video Information: ℹ️
 Intel HD Graphics 3000 - VRAM: 512 MB
 Color LCD 1280 x 800
System Software: ℹ️
 OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
 Hitachi HTS545032B9A302 disk0 : (320,07 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
 Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
 Core Storage: disk0s2 319.21 GB Online
 MATSHITADVD-R UJ-898
USB Information: ℹ️
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Inc. BRCM2070 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Inc. FaceTime HD Camera (Built-in)
 Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
 Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
 Mac App Store and identified developers
Launch Agents: ℹ️
 [not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [loaded] com.oracle.java.Java-Updater.plist [Click for support]
 [running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
 [loaded] com.adobe.SwitchBoard.plist [Click for support]
 [loaded] com.microsoft.office.licensing.helper.plist [Click for support]
 [loaded] com.oracle.java.Helper-Tool.plist [Click for support]
 [loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
 [running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
 [loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.google.keystone.agent.plist [Click for support]
 [running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
 iTunesHelper UNKNOWN Hidden (missing value)
 AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
 Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
 JavaAppletPlugin: Version: Java 8 Update 31 Check version
 FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
 Default Browser: Version: 600 - SDK 10.10
 AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
 AdobePDFViewer: Version: 10.1.13 [Click for support]
 Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
 Google Earth Web Plug-in: Version: 7.1 [Click for support]
 Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
 iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
 npsf_cef: Version: sf 3.3.1.1 [Click for support]
 Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
 DivX HiQ
 DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
 Flash Player [Click for support]
 Java [Click for support]
 MacFUSE [Click for support]
 Perian [Click for support]
 Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
 Skip System Files: NO
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
 Destinations:
 Time Machine Backups [Local]
 Total size: 999.86 GB
 Total number of backups: 60
 Oldest backup: 2012-07-15 01:16:54 +0000
 Last backup: 2015-03-29 19:28:06 +0000
 Size of backup disk: Excellent
 Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
 97% rapportd
 3% WindowServer
 1% mds
 0% fseventsd
 0% distnoted
Top Processes by Memory: ℹ️
 155 MB Safari
 120 MB Finder
 86 MB rapportd
 86 MB WindowServer
 69 MB mds_stores
Virtual Memory Information: ℹ️
 12.56 GB Free RAM
 2.53 GB Active RAM
 428 MB Inactive RAM
 1.66 GB Wired RAM
 1.04 GB Page-ins
 0 B Page-outs
Diagnostics Information: ℹ️
 Mar 31, 2015, 06:00:15 PM Self test - passed
 Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
 Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
 Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
 Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
 Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
 Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
 Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
 Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
 Note: You will need an active Internet connection. I suggest using Ethernet
 if possible because it is three times faster than wireless.

Firefox takes a long time to close since a recent update and hogs memory.

Since one of the recent updates that started using plugin containers, Firefox takes a long time to close. If I try to go back it, it tells me it is still running. I liik in Task Manager and about seven plug-in container. exe's are running and I have turned off or disabled mostplugins and addons, even Quicktime. Firefox uses an obscene amount of RAM on my XP machine and has made it sluggish. I use XP SP3. This started after you added the plugin containers in one of the recent updates earlier in the year. For the features it offers me or doesn't offer me, rather, it uses way too much RAM and is too sluggish. And takes a very long time to close out when I close the browser. It uses about twice as much RAM as it used to.

Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Troubleshooting+plugins

Why it takes a long time for my MacBook Air to turn on?

I brought my MacBook Air at a Power Mac Center to fix vertical lines on the screen. The vertical lines were removed. But since then, when I turn on my laptop, it takes a long time before it actually turns on. Sometimes, after pressing the power button, something seems to run at the upper left corner of the keyboard (near the power adapter) but it takes me practically hours before it actually turns on.
And when it is turned on already, I observed some unusual behaviors happening:
- Sometimes, while it is turned on, the battery status in the menu bar looks operating normally, but after a while, the trackpad will no longer work until the battery status says, "No Battery Available" and "Power source: Power Adapter".
- Sometimes, several horizontal lines appear on the screen then after a while the laptop will hang up.
- Sometimes, the sound sounds abnormal then after a while the sound no longer operates, and when I check the Sound at the System Preferences, it says, "No input devices found"
- Several applications do not work anymore, like Calendar, TextEdit, Reminder, Facetime, Preview and others.
Please help me figure out the problem. I cannot use my laptop as regular as before. I can no longer catch up with paper work deadlines because of these problems.

Please, help me. I need an immediate response so I could try to fix the problem because I need to use my laptop right away. Pls help.

Lenovo Services/Program takes a long time to start after bootup

It seems like Lenovo services take a long time to start after boot up is completely done.
My Bootup time is less than a minute (0:51s), but my lenovo services (Power Manager Gauage, Lenovo Services in the Sidebar, have th ThinkVanatage Button work, and most annoying of all is having access to my network card to change networks) takes about 2 minutes.
Is there a reason why this is taking so long?
I've uninstalled and installed the lastest Lenovo Interface Driver, and a lot of ThinkVantage/Lenovo software and drivers.
Any ideas?

No response?
Anyone else on T400 notice this?

Takes a long time to wake up ??

hi all, i have just got a new MacBookPro (mid 2012) i previously had an early 2011 for over two years until it broke down !.
my new MBP takes a long time to wake up, it seems to have crashed when i first open the lid, but no, it isnt crashed, it takes about a minute or more to wake up properly, my previous MBP woke up immediately under exactly the same circumstances, they both have Mountain Lion etc. so i cannot for the life of me understand why they should be so different ?.
Tim

If the suggestions mentioned in KB Article http://support.apple.com/kb/HT1411 Apple Portables: Resetting the System Management Controller (SMC) suggest you do the following:
You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.

Aperture 3.1 takes incredibly long time to start

Since after the upgrade from 3.0.x to 3.1 Aperture takes a long time to start up. I click on the Aperture icon in the dock, the icon bounces for almost a minute, then it stays still for more than a minute, doing nothing and without the "light bulb" indicator that the app is running. It's just sitting there in the dock. After a total of 2-5 minutes, the Aperture window opens and I can start working.
I tried many things suggested in the forums to speed up Aperture:
I turned off Faces
I turned off sharing of previews with iLife and iWork
I turned off using embedded JPEGs from camera
I deleted all Aperture preferences as I thought there might be a corruption after upgrade
I removed all plugins from Aperture plugin folder to make sure nothing is interfering
I used the Aperture rebuild and repair options on the library
I created a new Aperture library and imported my photos from the old library into a fresh one
I downloaded and installed the Aperture 3.1 update again to make sure nothing got corrupted during update installation
Nothing helped. Aperture takes 2-3 minutes to fully start.
Plugins in use: NIK Software's Viveza 2 and HDR Efex Pro, Tiltshift for Aperture. That's it. And, as I said, it doesn't help if I take them out of Aperture's plugin folder so they don't get loaded. Problem still remains.
My library isn't that big: 29GB in 8230 items. Is 2-3 minutes a normal startup time?
Has anyone experienced a similar problem after upgrading? As I literally exchanged everything underneath Aperture (deleted preference files, created new library and imported photos from old lib) I don't know what else I could try. Totally uninstall Aperture and re-install it again?
Any suggestions what this could be?
On a sidenote, interestingly Logic Pro takes about the same amount of time to start. The icon bounces in the dock for almost 1 minute, then I hear the harddisk working for another minute until the splash screen finally appears. Logic Pro is loaded after 2 minutes and 20 seconds. I could boot my whole Mac 4x in that timeframe.

To everybody having this problem. I found out what the culprit was. As a documentation here is what it was.
I read some posts here on the forums that mounted USB sticks or flash cards would make Aperture super slow while importing photos. I have Boot Camp installed and have a Windows 7 partition on the same drive as my MacOS. So, out of curiosity, I forced it to unmount as the partition automatically gets mounted by the OS.
Voilà! That seems to have been the culprit! Now both Aperture and Logic (which also had to think 2 minutes before it decided to start) display the splash screen in seconds and start like they are supposed to.
Make sure you have no drives mounted when starting these applications. This helped bringing down the starting time from 2 minutes and 20 seconds to just a few seconds. Of course, if you have your library on another drive you have to have it mounted. Maybe it only takes so long when you have Boot Camp and an NTFS partition. But if you experience lags starting these apps, try unmounting what you don't need.

Takes a long time to connect to the internet when I first open an app

I bought my Macbook Pro Retina 13inch last weekend and I love it! Everything was working fine but over the last couple of days, when I first open an app, for example Safari, Google Chrome, iTunes, App Store, anything that requires an internet connection, it takes a long time to load up that first time, but after the first page has been loaded it works again fine until closing the app and re-opening it. When loading the App Store or iTunes it has even said an internet connection is required, even though my connection is fine and the other apps are still loading ok.
I first thought it was my WIFI connection but I have checked my router and everything seems fine, also my iPad and iPhone are still working fine with the internet.
Has anyone else had the same problem or can offer me a solution?

I am getting the same issue, on first starting safari the first page takes an age to load.. once it has everything is fine.
I have tried the 'Reset Safari' function but no difference. This only happens on my Macbook Pro Retina, Using safari on my iphone or ipad is fine. (I connect via ethernet too so its not a wifi problem.)
Any one got an answer to this yet?

Exporting to Quicktime seems to take a long time

Similar Messages

Maybe you are looking for