Exporting to Shutterfly problems

I am trying to export an album to Shutterfly and for some reason that album is not showing up in Shutterfly. I did it three time already and each time waited for all of the pictures to export. I got a pop up box saying that the process was done successfully, but when I log into my account at Shutterfly, the photos from iphoto are not there! Any ideas what's going wrong? Thanks!

Then you're using a plug-in for this job, as iPhoto doesn't do this without a plug in. I suggest you get in touch with the makers of the Plug-in. At a guess I'd say it's Shutterfly who make it - you can contact them here:
http://www.shutterfly.com/help/areq.jsp?psid=TN2n7Wdj&p_lva=51&p_sp=&p_li=&p_accessibility=0&p_redirect=&p_nextpage=ask.php
Alternatively: PictureSync also supports exporting to Shutterfly.
Regards
TD

Similar Messages

IPhoto Export to Shutterfly broken

Is anyone able to use the shutterfly plug-in with iPhoto '08? If I go to File Export and click on Shutterfly nothing happens, and after doing so Export dialog won't appear again until I delete the plist file. On doing so Export works until I click the Shutterfly tab again. I tried reinstalling the plug-in, but no go. It looks like the new iPhoto '08 and Shutterfly are not compatible
Thanks,
Rebecca

have a problem (or 2) and questions: i have had no success in using the shutterfly plug-in with iphoto7.0 (or7.1) and read the discussions noting other people's problems...my initial problem was also that when i tried to export, nothing happened (no dialog box)...i reinstalled the shutterfly plug-in, restarted the computer and then the export dialog box DID come up..but without the export to shutterfly option...then i looked at the plug-ins and noticed i had fileexporter2 (only one), removed that and renamed it w/o the 2 and added it back in, still no luck, so renamed it again with the 2 (wanting to restore what i originally had) and put it backin the contents folder. my problem NOW is that (although i'm thinking shutterfly must update their plug in to solve the prob), my export dialog box does not have the "file export" option that i originally had when it comes up (although the fileexporter2 option is checked in the plug-ins area) - did i not install it back correctly? how do i get that file export option back in my dialog box? can anyone help or advise (shall i just reinstall the app?) --- thanks!

Exporting to pdf problem

Post Author: achaithanya
CA Forum: Exporting
Hi
I am new to crystal reports.we are converting actuate reports to CR XI.While converting we are facing lot of formatting issues.
Normally we get pdf from actuate and we need to create report pdf from CR XI.
The problem is pdf which created from CR XI is not exactly matching with Actuate pdf though in designing side everything is perfect
It would be great if you can give me a exact solution for this or do we have any alternate solution for this problem
I strucked up with this problem
Thanks in advance
Regards,
Chaithu

Post Author: synapsevampire
CA Forum: Exporting
Does "The problem is pdf which created from CR XI is not exactly matching with Actuate pdf though in designing side everything is perfect " mean that when you export to PDF from the CR designer it looks right?
And then from some other, unexplained process it does not?
Try describing more fully your environment and when the problem exists.
There's already a language barrier, not supplying technical information makes it even more tricky.
-k

I have a desktop iMac,within a yr old, I had iPhoto 9,downloaded to iPhoto 11, now lost my export to Shutterfly link, & looks like all my photos went to thumbnails, with poor resolution...help!!

I have a desktop iMac OSX 10.6.8, had iPhoto 9 & downloading software update to iPhoto 11, (9.1.5??) I can't find the way to reset up the "Export to Shutterfly mode" and it looks like all my previous photos went to a thumbnail size...with now poor resolution. If I would have know my pictures were going to turn into poor quality pictures, I never would have done the software update. Need a real person to talk to. This complicated method is not user friendly.
< Edited By Host >

I strongly recommend that you remove your contact information, especially your phone number, from this public forum.

CSV Export - Foreign Character Problem

Hi,
We have created a report which queries records from various countries. The problem we are having is with foreign characters (eg: Ã¼, Ã, Ã, Ã¤ etc). These characters are being displayed correctly in the browser however when we export to Excel (CSV) file they get turned into something like (Â¼, Â¤, Â¶, Æ).
Could someone please explain why this might be happening and if possible suggest a fix or workaround?
Many thanks,
Richard.

Hi,
I've been looking into this problem a bit further and it appears that all of the foreign characters are being correctly written to the .CSV file during the export. The problem is when Excel tries to open the .CSV file. I'm guessing that my characters don't fall into the .CSV's UTF-8 format, therefore Excel swaps them with other characters.
If you're interested here is my work around to this problem:
1) Open the .CSV file in Notepad
2) Select All then Copy
3) Paste into blank Excel document
4) Highlight Column A and select Data -> Text to Columns
5) Select Delimited then make sure only Comma is ticked
6) Click Finish
-- My original characters are now intact.
7) Finally save as .XLS
Regards,
Richard.

Priemere Pro consistantly crashed upon export, I cleaned media cache and that seemed to help. Now export errors unknown problem... read to uninstall and reinstall and now I can not open up PPCS5

Here is my problems with Premiere Pro CS5
When I export a project... the computer crashes.
I was able to get a tech chat and they would clean the media cache
so I did that.
Then, I got an export error "unknown problem" I then read in a forum to uninstall and reinstall Premiere pro
Now on my very nice relatively newer IMAC, when I go to applications to open it... I can not find a purple tab to open it. It just has a presets folder, then open that and it has styles, templates, textures but, now little purple Pr to open or drag to my dashboard.
Help PLEASE!!! I have wasted 20 hours of editing time, and work because of crashes, and problems.

Here is my problems with Premiere Pro CS5
When I export a project... the computer crashes.
I was able to get a tech chat and they would clean the media cache
so I did that.
Then, I got an export error "unknown problem" I then read in a forum to uninstall and reinstall Premiere pro
Now on my very nice relatively newer IMAC, when I go to applications to open it... I can not find a purple tab to open it. It just has a presets folder, then open that and it has styles, templates, textures but, now little purple Pr to open or drag to my dashboard.
Help PLEASE!!! I have wasted 20 hours of editing time, and work because of crashes, and problems.

Exporting to shutterfly

After installing Shutterfly's Export Assistant for iPhoto,
I'm unable to export directly from iPhoto 5.0 to shutterfly and I can't seem to get into the Share/Export feature to adjust size, type (JPEG,etc) of photos. What to I do now?

Hey Y'all,
I spent some time with Shutterfly a couple nights ago, putting together a photo book for my daughter's kindergarten teacher and successfully used both pieces of software that you're talking about.
On the export assistant software, you won't notice any difference in the export menu until you select your desired photos and hit "export" -- then a little window pops up and there will be a Shutterfly tab on the top far right. I just clicked that and hit export and worked like a charm. Perhaps I am stating the obvious and you're having some other problem???
On the upload assistant, exporting works in both Safari and Firefox, but the drag and drop feature will only work with Firefox. Also, this one you work from the Shutterfly site, rather than from within IPhoto. Again, sorry if I'm stating the obvious and this is all old news.
FYI, I'm using IPhoto 6.
Robin
Ibook G4 & PowerMac Mac OS X (10.4.9)

Crystal Report 2008 export to text problem

Hello,
I am using Crystal Reports 2008 for generating reports in our WPF application. In this application, we are exporting the report to txt file on a button click. Now the application contains a form called u2018Print Manageru2019, through which the user can print the exported report(text files). Now the issue, when we try to the any of the exported report file through the application, the printer leaves alternate blank pages. The printer used in this case is DOT MATRIX EPSON LQ-1150II ESC/P2. We even tried printing the text file on HP Laser jet 4600, but the same issue is faced.
Also, please note that when I try to read the exported txt file, a formfeed(u2018\fu2019 page break) character can be seen at the place where the printer leaves a blank page. Hence, my concern is, Is there any property of crystal report that I am missing on or is this a printer driver issue? But if it would have been a driver issue, then changing the printer might have solved the issue.
I also tried doing u2018Keep Togetheru2019 property = false of all the sections of the report. Also, I found that the u2018New Page Afteru2019 property = true and disabled for the u2018Page Footeru2019 section. So I set u2018New Page Afteru2019 property = false programmatically as
rdTest.ReportDefinition.Sections["Section5"].SectionFormat.EnableNewPageAfter = false;
but no luck.
If anyone has faced similar problem or have any clues, please help!
Any kind of help in solving this issue will be highly appreciated.
Thanks in anticipation!

Good morning.
We've got something to get straight first
When you say "...from the Report Viewer. The report printed as expected on HP printer...", do you mean the viewer of the .NET app, or the viewer of the CR designer?
And version 12.0.0.683, is very old (well as far as CR is concerned anyhow ). That version is SP 1, we are now on SP 2. So that will be the place to start. Get to SP 2 which can be downloaded from here;
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Ludek

CS4 Exporting and Importing Problems

Hey all,
I joined this forum specifically so I could ask this question. I have been looking all around and can not find the answer.
I have a Canon Vixia HF S10, with internal 32 gb memory, and am trying to import directly into Premiere Pro. Now, I have the media browser set up to AVCHD, and the icon next to the files is that filmstrip and speaker, showing that it knows it's video. However, when I try to drag it in, it acts like it's importing, and then pops up an error stating that the "Format is not supported". Now it says on Adobe that it IS supported, and I can import it elsewhere. I've tried re-installing it, using Clean Script, and nothing works! I've also updated it every time I've installed it, though I've tried without updating as well.
My other question is this: I want to export a project as a .dv or DV stream, and I cannot find an option for it. Simple as that. It also says that exporting as .dv is supported in CS4. What's the problem? Is there something I need to download for either of them?
I'm running it on a Mac, on Leopard.
Thanks a lot,
Nili.

I am having the same problem. The file extension that I am trying to import
is .mts - AVCHD format which Adobe does not seem to recognise. I have taken it from a panasonic camera. Camera makes no difference, it is the format in which the file is stored. I have also also opened up
a customer chat with technical support on adobe. Could it be something to do with missing codecs?

Export Release Build - Problem with Server Settings

Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
When i click the button i get the server setting.
Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost
whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

Export Release Build Problem

I am using Adobe Flex Builder 3 on Windows 7. When I got to export a release build to publish the project, the bin-release folder does not get all necessary files. All of the .mxml files are not copied to the folder. This just started happening out of the blue for some reason and had been operating properly prior. If I select the option to view source files I can see the files that should have been copied by Extracting the zip file that contains the viewable source, but they do not copy on their own.

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

Export to Excel problem in Signal Express 2012

Equipment used: PXIE-8102 CELERON T3100 1.9GHZ Controller Windows 7, PXIE-1071 4 Slot Chassis, PXIE-4140 4-Channel SMU 1.7.5 version.
I am using Signal Express 2012 and the SMU to plot the I/V characteristics of FET and other active devices. I am able to obtain the anticipated curve traced results but I am not able to Export the data to Excel directly from the Data View using the Microsoft Excel option. The error message is: Data could not be sent to Microsoft Excel. Please ensure you have a properly licensed version of Microsoft Excel. See attachment.
We have checked our version of Microsoft Office, it is Professional Plus and has the correct volume license so it does not revert to a home or student version.
I have been able to use the Export to Excel function directly from the Dataview when I was using one of the waveform tutorials supplied with Signal Express so I suspect it is a function of the SMU.
In conversations with an NI support engineer he felt it may be a problem with "an active x call is just not seeing the license for some reason", his suggestion is to drag the data into Excel rather than use the Data view tab. Because the SMU is being used in a production environment it is not really appropriate to have the operator work at this level so I would rather figure a way to have the data exported using the Data View tab.
Anyway please can you let me know if there are any known work around for this issue.
Thank you

Calvin1957,
I am not seeing any attachments in the first post or this latest post. The images should be added using the attachments section when creating the post. You should also be able to insert an image using the insert image button in the toolbar. Let me know if you have any questions. Thanks!
Robert B
Applications Engineer
National Instruments

Export to ProRes problem. Please help!

I am getting very strange results when exporting to ProRes from Shake (Just "snow" on all frames). Export to uncompressed, DV etc works fine. Is there something I can do to fix this? Exporting to ProRes from FCP works fine.

Which revision of Shake are you running? I do recall getting this problem at one point and solving it with a Bytes node - but now running 4.1, I no longer get this error...
Patrick

White balance, Export and shutterfly

I thought I was doing everything right with the holiday family shots: shot RAW, then corrected white balance as needed (often, cool them down slightly) in LR3.3 Develop. A test print (color managed by LR) on my home inkjet looked just like on-screen, color-temp wise. Then, to crank out a stack of 4x6s for family, I Exported jpgs (sharpened for glossy), and uploaded to Shutterfly (actually, Published them using a 3rd-party add-on). The resulting prints from the lab are MUCH warmer than the test prints or screen.
OK, ok, you get what you pay for. But...before I blame one vendor and start trying others: is this Shutterfly et al applying their own corrections? Or is there something I'm overlooking in the Export/Publish stage? TIFF vs JPGs?
This is NOT another "why aren't my prints like the screen" thread -- stuff is calibrated and my prints at home DO look like the on-screen image, thank you.
TIA

Short answer: click lift tool, click photo to transfer from, uncheck adjustments you don't want stamped, click photo to transfer to.
Longer answer:
1. Click the lift tool
2. Hover over a shot you want to copy anything from, and the cursor changes to an upward arrow. Click on the shot.
3. The cursor now changes to a down arrow when over any picture, indicating that Stamp is active. Uncheck any adjustments or other info you do NOT want to stamp, and click on the photo. Checked adjustments will be stamped.
Make sure you choose Add or Replace in the popup to add or replace the adjustments you're stamping (this setting is usually only relevant to metadata for me).
Mark

Export to PDF problems

Much of our workflow (Prepress) involves taking in client files, laying them up in InDesign (either for sizing, position, or to build versions), and then submitting that file to our RIP.
Exporting to PDF is quick, allows for the preservation of transparency, allows you to bypass InDesign's faulty color management UI, and can be batched via plug-ins like Batch Output. But, InDesign can cause a number of issues with the resulting PDFs. CS4 seems to be particularly bad in handling subset fonts. It will create documents that appear in Acrobat 8 to have the "undefined character", but look perfectly fine in Acrobat 9 (ID CS4 is the culprit here - it doesn't happen in CS3).
I've had elements drop-out, transparencies disappear, and previews corrupted. Is there an export method that is stable and reliable? Or do we have to take a step backward to using the Print command and then Distilling?

What is to be done to ensure that PDFs from ID CS4 output correctly from a commercial printer?
We have recently had a costly problem with two PDF ads (producer: Acrobat Distiller 8.1.0 Win) that I placed in a ID CS4 layout (Mac) and then exported to a new PDF 1.3 (producer: PDF library 9).
Note: I have used the same ads before with InDesign CS3/Acrobat 8 workflow and they previewed and printed w/o problems!
The new exported PDF from InDesign CS4 looked correct in Acrobat 9, but this time a few random characters from subset fonts (Swiss and Zurich) were missing in the printed ads. This was one costly mistake!
After checking up the scarce information on this problem on the internet I opened the problematic InDesign CS4 PDF layout in Acrobat Reader 8 and the characters in the ads that previewed correctly in Acrobat 9, but were missing in print, were missing here as well!
Then I tried to print the ID CS4 PDF layout from both Acrobat 8 and 9 to a HP PostSript2 laser printer and got missing characters from Acrobat 8 but all correct characters from Acrobat 9.
This is a really disturbing problem since we have little control over how PDF ads that we get are produced as well as over the offset printing (RIP) workflow.
In a nutshell, PDF production process that once worked in CS3 does not work reliably any more in CS4 and the only variable changed is the CS3 to CS4 upgrade on our side.
Please help!

Exporting to Shutterfly problems

Similar Messages

Maybe you are looking for