Exporting to Tape: How the **** do i do it

Im using a HDR FX1 HDV cam but filmed my project with is as SD non wide screen. I edit it and try to export. i have tried this a thousand times but it never works.
I put a new tape it and black in code it. so far so good.
then i try assemble it but then a widow pops up saying "incompatible compression settings, my output does not mach my output settings and I'm stumped, i tried everything.
i always end up exporting it to imovie, and this takes care of the job but lose quality and time.
I would be really cool if somebody posted a list of how to export to tape. I think a lot of people would find it help full.
THANK YOU
Message was edited by: Elliot Lucas

#18 Edit to Tape "Incompatible Compression Settings"
Shane's Stock Answer #18: Edit to Tape gives the error "Incompatible Compression Settings"
To Edit to Tape simply drag it from the BROWSER onto the Edit to Tape window and choose Assemble Edit or Insert Edit.
Ttape needs to be black and coded and have TC already on it. This can be done in the Edit to Tape window as well. Make sure you are in Mastering Mode, and click on the black film strip, and choose CURRENT SETTINGS.
Before you lay back to tape, you’ll need to mark and IN point in the ETT window as well as on your timeline. Say at 59:30:00…so at 59:30:00 your timeline will start and it will begin recording onto the tape at 59:30:00.
Shane

Similar Messages

  • AUDIO PROBLEMS when exporting to tape

    Hi!
    ADOBE PRO CS4 on VISTA.
    a)  Produced my film on timeline and there everything is perfect. Audio and video are fully synchronised.
    However: when I export to tape, playing the exportresult, audio comes about 10 seconds later then the corresponding video! Already from the very first clip!
    I rerenderd audio and Work area a few times and also tried Clip -> Audio Options-> Render and Replace but nothing seems to work out.
    This is the second time I have this problem.
    b)  When there is no solution for this problem ( an awfull idea!!) I think I have to Unlink Video and Audio for all my clips (about a thousand of them) and then shift the audiopart about 10 seconds to the left.
    I found out that "group-unlink" with the help of the ALT knob (an advice I read about here) doesn't function with me !!
    Is there a solution for these problems? Thanks a lot!

    [Moved to CS4 and Earlier.]

  • Export to tape grayed out

    I am a new user of Premiere Pro CS6 (migrating from Final Cut.) I am trying to Export to Tape with a simple DV clip. When I try to select Export/Tape, the "tape" option is grayed out. In the Sequence Settings, the "playback options" are likewise grayed out. Yes, I do have the specific Sequence highlighted when I try to export to tape.
    The odd thing is: Premiere is having no trouble recognizing my deck and my FireWire connection. I have a Sony DVCAM deck connected by FireWire, and when I simply playback the clip from the timeline, both the video and audio playback fine, which technically means I could just Print to Tape that way, but I would much rather have the specific control of doing it through Device Control so I could record to the deck in a more accurate way.
    I am running the program on a Mac Pro.
    I couldn't find the answer to this in the online help or in this Forum so far, so I appreciate any advice. Thank you.

    Hi lakeivan,
    What DVCAM deck are you using?  Is your device control RS-422 or firewire?  On the Mac, can you successfully assemble edit to tape using PP CS6? Specifically, if you use the "Assemble at timecode" option in the Export to Tape dialog, does PP CS6 actually play the timeline once the deck starts recording in assemble mode?
    This function seems to be broken in the CS6 Windows code and I'm wondering if it's the same in the Mac version.
    Thanks.

  • Export to tape stops unexpectedly

    Hello,
    I am trying to Export to Tape from CS4 to a Sony DSR-1500AP deck. It starts fine, but after about 5 minutes (a different point on each occasion) everything just stops.
    This happens in DV and DVCAM projects.
    I would be extremely grateful for any assistance!
    Thanks
    Robin

    We have the same deck but had a similar issue with our DSR-11 on show site. Our export would stop recording "Export to Tape" at the exact place (as indicated by the CTI) every time. Very frustrating. It turned out in our case that the problem related to an NTSC Widescreen *.avi file that was created on a Mac using Boot Camp. Are there any suspect files in your project? I solved the issue on an earlier version of Premiere (not CS4) by bringing this file (where the tape stopped) into an new project and exporting it as a Microsoft AVI as opposed to a DV AVI. Once I replaced the file on the timeline with my new exported version, the export to tape went without a hitch.

  • Export  to tape Time code problem

    Premiere Elements 3.0
    During "Export to Tape" operation, the "End Timecode" is stuck at 13 minutes even though the edited video is 30 minutes long. There does not seem to be an obvious way to set this parameter. I can't get the whole thing to transfer. Ideas, please!
    William
    Vista Custom PC
    Pentium Dual core 3GHZ
    4 MB RAM

    Can I have that in writing? I get so many arguments to contrary, William.
    Glad I could help though!

  • Imovie crashes when i try to view the video full screen or export it. How do i fix this?

    iMovie crashes when i try to view the project full screen and export it. How do i fix this?

    Close out of the camera app, double tap the home button and completely close out of the app.
    Then do a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    Then check your camera roll again.

  • Help - How to export to tape?

    A little background.....I used to a lot of work in iMovie6 HD. When I bought my Mac with iMovie 08, I hated it, so I downloaded iMovie6 again. I then bought Final Cut Express, which is wonderful, but too complex for me. Recently, largely for image stabilization and themes, I bought iMovie 09. I currently use a Sony MiniDV camcorder, which I love.
    I'm a young parent with very limited time to edit - so I would now like to do most of my work in iMovie 09 - despite its shortcomings. But when my projects are completed, I would like to export them back to my DV tapes for a good, non hard drive backup. This is also the easiest way to play them on my plasma & saves me having to burn a dvd. Of course, it appears that iMovie 09 does not support this feature.
    So what is the best way for me to export to tape from iMovie 09 projects with the smallest amount of quality loss. I imagine I can export it to either FCE or iMovie6 - but am not sure what is best. I also am not up to snuff on settings and how to do it if I do it via quicktime, etc. Any thoughts on the best way to do this would be great.
    MANY THANKS!
    jake

    Hi(Bonjour)!
    I would go with the import of your iMovie 9 project into FCE 4.
    See this tutorial:
    http://movies.apple.com/movies/us/apple/finalcutexpress/2007/finalcutexpresstutorial_importfromimovier640-10cie.mov
    Once converted into FCE, use the print to tape command.
    I don't think that iMovie HD 6 could open iMovie 9 project, but you can ask on iMovie 9 Forum.
    Michel Boissonneault

  • When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts.  How can I change this setting?

    When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts.  How can I change this setting?

    The only way that I know currently know of to remove old or incorrect email addresses from the Mail app is to reset the iPad back to factory defaults, which I assume that you don't want to to. You could try leaving feedback for Apple and maybe one day we'll day be able to edit them : http://www.apple.com/feedback/ipad.html#ipad

  • I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    Hi, bamboo64. 
    Try closing all open applications in multitasking and power cycling the device.  Once this is done test the results.  If the issue persists, I have included a couple troubleshooting articles that I would recommend going through. 
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    Jason H. 

  • How can I turn off Recently Websites when opening new Safari window? After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed.

    How can I turn off Recently Visited Websites when opening new Safari window?
    After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed. How can I turn this function off? I do NOT want my new Safari windows to have history displayed of previous websites I visited. I only want my Favorites (on the top) to be displayed. Please help.
    Thank you for your time, patience, understanding, kindness, and concern.

    Thanks for replying, but that isn't the answer I am looking for.  Also, there is no + sign, UNLESS you do tap the overlapping boxes.
    Let me try to ask my question a little more clearly:
    When I tap the two overlapping boxes on the lower left (the option to Open New Windows), the new Window that appears will show your Bookmarked FAVORITES. But with my new iPhone 6, and the new iOS 8.0.2, when I tap the two boxes to open a New Window, my Bookmark Favorites show (as they always have and should), but below them, there is a dividing line underneath them, and it says Recently Viewed Websites, and has these websites available to tap.
    So my question is, HOW DO I TURN THESE OPTION OFF?
    *UPDATE  (10.13.14): Since I have asked this question, I no longer see these Recently Viewed Websites under my Bookmarked Favorites in my new Window tabs. So I hope that Apple fixed it, or somehow it was a mistake, or somehow I changed an Option on my iPhone 6 that stopped this for reoccurring.
    Thank you for your help bobseufert! I appreciate your concern, kindness, and the time to try to help. I am grateful.
    Have a blessed day.

  • How do I get PDF forms to export to excel in the desired order?

    How do I get PDF forms to export to excel in the desired order?
    Here is what I have done:
    As taken from another post:
    Choose Forms > Manage Form Data > Merge Data Files Into Spreadsheet.
    In the Export Data From Multiple Forms dialog box, click Add Files.
    In the Select file Containing Form Data dialog box, select a file format option in File Of Type option (Acrobat Form Data Files or All Files). Then locate the form files that you want to merge into the spreadsheet, select them, and click Select.
    Repeat the previous step to add form data files that are in other locations, as needed.
    Click Export. Then select a folder and filename for the spreadsheet, and click Save.
    In the Export Progress dialog box, click either View File Now to open the spreadsheet file or Close Dialog to return to Acrobat."
         The problem now is that Adobe populates Excel in ABC order of the form, based off of the name of each box in the form. For example, if my form has three text boxes, named A, B, and C, then Adobe will export to Excel as such:
    Row 1 =         A                              B                              C
    Row 2 =         data entered             data entered              data entered
    where 'data entered' is whatever the user typed into the form boxes. But what if I want a different order for exporting, and I don't want to rename my text boxes? What if I want:
    Row 1 =         C                              B                              A
    Row 2 =         data entered             data entered              data entered   ?
    Is there a way to do this in acrobat x or xi?
    Thanks

    I don't have time to test right now, but there was a change with Acrobat 10 where it exports according to the tab order, which you may have to set manually, so give that a shot. Otherwise, you'll have to process the file after it's exported if you need the fields in a particular order. This wouldn't be too difficult to do with something like a VBS or JS script in Windows.

  • HT2203 How do I export a file from the new iMovie 10.0.2 to iPod size?

    How do I export a file from the new iMovie 10.0.2 to iPod size? I used to be able to do this and it would save as a m4v file but I can no longer do this and the files are too big.

    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos
    You may need a third-party computer app like HandBreak. That one is free and has preset outputs for iOS devices

  • How to export some data from the tables of an owner with integrity?

    Hi to all,
    How to export some data from the tables of an owner with integrity?
    I want to bring some data from all tables in a single owner of the production database for development environment.
    My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
    These three fields are present in the main system table (the table of contracts). Then I thought about ...
    - create a temporary table from the query results table to contract;
    - and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
    I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
    select r.constraint_name "FK name",
    r.table_name "FK table",
    r.column_name "FK column",
    up.constraint_name "Referencing name",
    up.table_name "Referencing table",
    up.column_name "Referencing column"
    from all_cons_columns up
    join all_cons_columns r
    using (owner, position), (select r.owner,
    r.constraint_name fk,
    r.table_name table_fk,
    r.r_constraint_name r,
    up.table_name table_r
    from all_constraints up, all_constraints r
    where r.r_owner = up.owner
    and r.r_constraint_name = up.constraint_name
    and up.constraint_type in ('P', 'U')
    and r.constraint_type = 'R'
    and r.owner = 'OWNERNAME') aux
    where r.constraint_name = aux.fk
    and r.table_name = aux.table_fk
    and up.constraint_name = aux.r
    and up.table_name = aux.table_r;
    -- + Dynamic SQL
    If anyone has any suggestions and / or reuse code to me thank you very much!
    After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
    Thinking...
    Let's Share!
    My thanks in advance,
    Philips

    Thanks, Peter.
    Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
    With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
    1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
    2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
    Once again, thank you,
    Philips
    Reading Oracle Docs...

  • In Exports sales process, how you configure the Duty Draw Back

    in my case
    we r creating Exports but
    duty unavailability of time and time taking process in export processing
    we are creating Excise invoice and cenvat is debited .
    now we r asking the govt. for the duty draw back for the value already cenvat is debited with proper documents like ARE1 etc.
    how to manage this duty back and what r the replications or changes thereafter
    thanks in advance

    Hi Sunitha,
    Pls can u explain how did u solve (In Exports sales process, how you configure the Duty Draw Back) this issue....since i don't have idea abt this...but shortly i am going to do this in my client place....
    thanks,

  • Export photos and how to keep the event stucture?

    Hi,
    I have been searching the iPhoto section but didn't found the answer.
    Who can help me?
    My photos are organized in events (I decided not to use albums anymore).
    I now want to export all photos and use the event name as folder name.
    The event export feature exports all photos but the event separation is gone.
    Example:
    "Event 1" contains 10 photos Pic_1 - Pic_10
    "Event 2" contains 20 photos Pic_1 - Pic_20 (yep there are duplicate filenames)
    This is what I want to see after the export (30 pictures in 2 folders):
    \Event 1\Pic_1
    \Event 1\Pic_10
    \Event 2\Pic_1
    \Event 2\Pic_20
    How to do this?
    /rob

    Hi Terence,
    Thanx for your response.
    Do you mean that I have to create a target folder per event and do the export per event?
    I am sure this will work but I want to avoid this as creating 200+ event folders manually is too time-consuming (anyone with a clever AppleScript to do this job).
    Decided to do a quick-and-dirty backup by opening the photo library package contents and copy everything in it to a network drive.
    But I am still interested in an easy way to create event directories including the current pictures.
    br/rob

Maybe you are looking for