Exporting to .WMV not finishing

Hi,
I am trying to export a movie in imovie HD that i have edited. I have simply chopped out 30seconds and made a transition.
When i export, i am choosing .wmv but for some reason it only exports the first 29seconds, but the movie is actually 30minutes long.
When i export to a different type like .dv or .mpeg4 it does the whole lot.
Any ideas or help would be great,
Many thanks.

OK This is the secret:
Flip4Mac WMV Components allow you to import, export and play Windows Media video and audio files on your Mac. Flip4Mac WMV export components can be used with QuickTime Pro, Final Cut Pro, Compressor, and iMovie 06 (iMovie '08 and '09 not supported).
You have to go to this link:
http://www.telestream.net/flip4mac-wmv/overview.htm
and buy at least WMV Player Pro ($29) and VOILA !!
I hope this can help you

Similar Messages

How does final cut pro x export a file if it has not finished rendering?

How does final cut pro x export a file if it has not finished rendering?
So today I finished a project: Share >Export > as a pro res 422 and I'm now burning with iDVD as we speak. FCPX is still doing background rendering! I hope my DVD turns out ok....

You don't need to render before export.
Rendering is for playback.
If your project plays OK from the storyline, you can safely turn off rendering in preferences.
Andy

Keynote 08 will not finish export to quicktime, or share with any apps

I have a presentation that I am using a smartbuild (160 photos) that will not finish exporting to quicktime, or share with youtube or iweb/idvd, etc. It saved once out of twenty attempts. It freezes up around the last photo in the smartbuild then quits unexpectedly. Any tips?

The other work around that I've found is to tell it "send to iDVD" but then quit iDVD when it pops that up. You'll end up with just the quicktime file it created.
What I noticed is that when a "quicktime export" plays in QT, it has a fps rate of like 7 or 8 or even 13 but the dynamic "playing fps" goes up to 30 during transitions and back to 0 when there isn't a transition. At least with the iDVD cheat you end up with 24 fps. That may work for some people, that is film rate, but I'm in need of NTSC DV 29.97. So I import it into Final Cut Express, and do an export conversion.
I don't use audio, so I don't know how that would work in this cheat, but since your voiceover (I'm guessing based on trying to put music to my slides) is one entire track, you can add that in FCE before that export and line it up there.
If anyone else has suggestions to get a 29.97 export correct with the "export to quicktime", I'd love to hear it. This cheat takes too long for my work.

Adobe media encoder export error "writer not found"

When trying to export to wmv using adobe media encoder I get an export error of "writer not found". I did a search and found others having the same issue with no fix as far as I can see. Just wondering if anyone has any more iformation on this. I'm using Vista Ultimate and Premiere CS3.
Thanks

I registered the WMEncoderHelper.exe file with regserv, but I still get
the "writer not found error". I wish I knew what codec it is trying to find and use.

Export error: Writer not found

Hello,
I am using PPCS3 with Aspect HD.
I am using the Cineform HD 30p preset.
I keep getting an export error: writer not found
when I try to export a short movie using two uncompressed .avi's I obtained from 3DS Max 2009.
Any ideas what "Writer not found" means.
Simon

Have you installed anything CS4 at all? Even a public beta of Soundbooth or some other non-Premiere component?
I never did find out what I installed that trashed .wmv export for me in Pr CS3 on my old XP system. Maybe it was the beta of Sb or maybe it was the free stand-alone Microsoft Windows Media Encoder.
Anyway, a full uninstall and reinstall of CS3 will likely fix the problem, but I can't say for sure because I never got around to doing it. I used the MS Windows Media Encoder until I could load CS3 on my new system (dual-boot XP32 with Vista64).
EDIT: All is well with .wmv export on the new system. No CS4 on XP32 and no WME there, either.

How to export to .wmv

Ok I've got a 5 min 10 second video I want to export to .wmv...for some reason the option is not in my export options...tried it in the render que for .wmv and it came out over 45gb file with choppy animation and such.
My friend gave me the specs she uses:
Export to .wmv at 5.9 mbps 720i.
what the heck is 720i?
I'm new to AE 7, but I've torn the render options apart and can't find anything looking like it is gonna give me those options. Got the windows media option...but it still comes out at a rediculous file size...garsh.
She said it was a plugin she got, but can't remember the name of it.

720i --> HD 720x10280 px interlaced. WMV exporting is handled by the Adobe Media Encoder (Windows only), which is a dedicated sub-system inside the standard Output Module settings. If it is in place can be verified by checking if other options like MPEG-II DVD are listed in the output format selection and of course the ominous "Windows Media" itself. What you describe sounds like you are actually creating an AVI file. A WMV at the specified ratres and duration should be nor more than 400 MB or so...
Mylenium

10g Full Database Dump Takes more than 2 Hours Still not finished

Hi all,
Full Database Dump Takes more than 2 Hours, Still not finished.
Version - Oracle 10g 1.0.2.0
Database Size is Around 160GB.
Used Below Query to take Full Database Dump.
expdp user/pwd@10gdb full=y directory=test_dir dumpfile=curent10g.dmp logfile=expdpcurent10g.log;
It takes more than 1 hour in processing the functions.i.e)
Processing object type DATABASE_EXPORT/SCHEMA/FUNCTION/FUNCTION
And the Log File:
Export: Release 10.1.0.2.0 - Production on Friday, 04 May, 2012 10:17
Copyright (c) 2003, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
FLASHBACK automatically enabled to preserve database integrity.
Starting "EXPTEST"."SYS_EXPORT_FULL_02": exptest/********@curentdb full=Y directory=test_dir dumpfile=curent10g.dmp logfile=expdpcurent10g.log;
Estimate in progress using BLOCKS method...
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 4.574 GB
Processing object type DATABASE_EXPORT/TABLESPACE
Processing object type DATABASE_EXPORT/DE_SYS_USER/USER
Processing object type DATABASE_EXPORT/SCHEMA/USER
Processing object type DATABASE_EXPORT/ROLE
Processing object type DATABASE_EXPORT/GRANT/SYSTEM_GRANT/PROC_SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/GRANT/SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/ROLE_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/DEFAULT_ROLE
Processing object type DATABASE_EXPORT/SCHEMA/TABLESPACE_QUOTA
Processing object type DATABASE_EXPORT/RESOURCE_COST
Processing object type DATABASE_EXPORT/SCHEMA/DB_LINK
Processing object type DATABASE_EXPORT/TRUSTED_DB_LINK
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/SEQUENCE
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/GRANT/DE_S_SEQ_OWNER_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/DIRECTORY/DIRECTORY
Processing object type DATABASE_EXPORT/DIRECTORY/GRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/CONTEXT
Processing object type DATABASE_EXPORT/SCHEMA/DE_PUBLIC_SYNONYM/SYNONYM
Processing object type DATABASE_EXPORT/SCHEMA/SYNONYM
Processing object type DATABASE_EXPORT/SCHEMA/TYPE/TYPE_SPEC
Processing object type DATABASE_EXPORT/DE_SYSTEM_PROCOBJACT/DE_PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
Processing object type DATABASE_EXPORT/DE_SYSTEM_PROCOBJACT/DE_POST_SYSTEM_ACTIONS/PROCACT_SYSTEM
Processing object type DATABASE_EXPORT/SCHEMA/PROCACT_SCHEMA
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/PRE_TABLE_ACTION
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/GRANT/DE_S_TABLE_OWNER_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/GRANT/DE_S_TABLE_NOTWGO_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/INDEX
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/CONSTRAINT/CONSTRAINT
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/STATISTICS/TABLE_STATISTICS
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/COMMENT
Processing object type DATABASE_EXPORT/SCHEMA/PACKAGE/PACKAGE_SPEC
Processing object type DATABASE_EXPORT/SCHEMA/PACKAGE/GRANT/DE_S_PACKAGE_OWNER_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/FUNCTION/FUNCTION
Help me.

Export is Still in progress
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Job: SYS_EXPORT_FULL_02
Owner: EXPTEST
Operation: EXPORT
Creator Privs: FALSE
GUID: 94AB0C8AA824462AA96C8481CF0F676F
Start Time: Friday, 04 May, 2012 10:18
Mode: FULL
Instance: curentdb
Max Parallelism: 1
EXPORT Job Parameters:
Parameter Name Parameter Value:
CLIENT_COMMAND userexp/********@curentdb full=Y directory=test_dir dumpfile=curent10g.dmp logfile=expdpcurent10g.log;
DATA_ACCESS_METHOD AUTOMATIC
ESTIMATE BLOCKS
INCLUDE_METADATA 1
LOG_FILE_DIRECTORY TEST_DIR
LOG_FILE_NAME expdpcurent10g.log;
TABLE_CONSISTENCY 0
State: EXECUTING
Bytes Processed: 0
Current Parallelism: 1
Job Error Count: 0
Dump File: C:\ORACLE DMP\CURENT10G.DMP
bytes written: 4,096
Worker 1 Status:
State: EXECUTING
Object Schema: PUBLIC
Object Type: DATABASE_EXPORT/SCHEMA/PACKAGE/GRANT/DE_S_PACKAGE_OWNER_OBJGRANT/OBJECT_GRANT
Completed Objects: 1
Total Objects: 1
What Does it mean, Suggest.

CP5.5 - Import PPT - Sometimes PPT Animations do not finish playing - WHY?

I have CP5.5.
We animate our PPTs and then import them.
Usually the last animated object in PPT does not finish playing.
For example if you use the "Wipe" animation on an Arrow drawn in PPT and it is the last animated object.
I usually put the animation speed on Very Fast in PPT but sometimes it still doesn't finish animating or the tip of the arrow doesn't display all the way.
Has anyone else run into this situation?
I usually end up changing the animation type, however I was wondering what the cause of this is?

Hey Frank. This is a good tip. Ever since Presenter changed the way they handle audio files, we have stopped recording our audio in Presenter; we all happen to have Captivate licenses on my team so we use it to record and edit all audio before we export to Presenter. If we have to make any changes, we also go back to Captivate and import the changed audio again. We tried working with the Adobe "support" for months on this issue and got nowhere. Each time you alter audio, even if you remove your breathing sounds, if divides the audio into two parts at the place where you changed it. So, yes, for longer pieces of audio, you end up with multiple files. Presenter does "merge" them together when you publish; however, it doesn't do a very good job of it. So every time the playbar reaches one of these split sections of the audio, it has a little glitch.
Now that you can record audio in PowerPoint and since the PowerPoint integration is so much better in Captivate, we will be dropping our Presenter licences. We may keep one or two so we can update existing modules. Unfortunately when the product has too many glitches and the support is not good (we had Gold or Platinum support too), you can't afford to stay with the product. We've used it for about 6 years.

Exporting to WMV causes Premiere Pro to crash

Hi there all,
Was wondering if you could help me here. When i export to WMV PP crashes. Now I thought i could get around this by rendering it as another file type and then using Adobe Media Encoder to code it to WMV... BUT! when i did this Adobe Media Encoder only gave me 1/2 my video!!! It too crashed!!! :-( . The video site that my work uploads to only accepts wmv unfortunatly
please help
james

Hi there, sorry for the lack of info!
I have PP CS6
I have just recieved permission from my IT dept. to download the updates for my Adobe package and am updating as we speak
Operating system = Windows 7 service pack 1 64 bit
footage type (H264) mp4
error message when encoding (Unknown error)
Was exporting to wmv
has worked before, was using custome settings redcing the average video bit rate to make the video smaller for upload
no i do not have any third-party effects or codecs installed
system:
Intel(R) Core(TM) i7-3930K CPU @ 3.2GHz 3.2Ghz
16Gb ram
NIVIDIA Quadro 4000
I have no idea if i am using "Mercury Playback Engine GPU acceleration"
Only happens with final output
Unfortunatly I am unable to post a video up of my issues as the downloads have not been granted by the IT department

Imovie shuts down when I click to Export Movie, share or finish project.

Imovie shuts down when I click to Export Movie, share or finish project.
I have upgraded RAM Memory cards from 4 to 8 GB and cleaned away the soft wear and files I do not need.
The movie is in HD and about 25 min long.
The "Problem Info" says:
Process:         iMovie [1190]
Path:            /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier:      com.apple.iMovieApp
Version:         9.0.2 (1099)
Build Info:      iMovieApp-10990000~3
Code Type:       X86 (Native)
Parent Process: launchd [102]
What is there to do?
/Nicco

Hello there, averypamby.
The following Knowledge Base article offers up some great information in regards to sharing/exporting your video in Motion:
Motion 5: Export a QuickTime movie
http://support.apple.com/kb/PH16623
Export your project as a movie file
Choose Share > Export Movie (or press Command-E).
Choose an export format from the Export pop-up menu.
This menu provides a list of codecs.
Choose an option from the “Open with” pop-up menu:
Do Nothing: The movie is not opened after the export is completed.
Open with QuickTime Player: The movie is opened in QuickTime Player.
Open with Compressor: The movie is opened in Compressor (if installed on your system).
Choose an option from the Include pop-up menu: Video and Audio, or Video Only.
If you’ve set In and Out points in the Timeline, use the Duration pop-up menu to choose whether to export the sequence or the portion between the In and Out points.
To specify additional Motion-specific options, click Render.
For more information about options available in the Render pane, see Render settings.
To see details about the file to be output, click Summary.
Click Next.
Enter a name and choose a location for the exported file, then click Save.
Motion renders and saves your movie.
Important:    The Export Movie command does not use background rendering, so you must wait until rendering is finished before you can continue to work in Motion.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Why is exporting to PDF not working?

Why is exporting to PDF not working?

Dear Claudio,
I know it wasn't much to go on but I got your attention!
I work for a charity and use a program called "Donor Perfect".
It has a feature that when you generate a report it gives you the option to export to MSWord, Excel, and PDF.
Below is the step by step description of what happens.
After log on ......
     1. Click on Reports
     2. Listings
     3. Report Category(any)
     4. Select Record type(any)
     5. Select report options (any selection filter that fits or Build a filter) and sort order(any)
     6. Enter title (accordingly)
     7. Click on Preview
     8. When next screen opens with report visible - in "Report Print preview" line above report choose PDF icon
     9. Export to PDF window opens
     10. click on Page range-ALL
     11. What to print-All pages in Range
     12. Save as C:\DPW32\dpsumm.pdf
     13. collate
     14. number of copies(1)
     15. Click on "Screen"
     16. Click on "Display Conversion Status"
     17. Then "OK"
     18. After conversion status reaches "100%" nothing happens -screen does not change!
Then I minimize DP screen and I go to Start menu
     1. Click on Start
     2. Then "My Computer"
     3. Local Disk "C"
     4. Dpw32
     5. Look for "dpsumm" file with today's date
     6. Size of file says 0 KB and that's it!!!!
In previous versions of DP (8 and 9)
the PDF would open on the screen as soon as the Step 18 was finished, then I could save it with an identifying name to a different folder and use it as an attachment that a Donor could receive by e-mail.
I hope I can get back to that because now I have to convert to "Word" (Which takes a long time)then from that I have to create PDF from Acrobat. too many steps ..... if I have 20-30 reports it's too cumbersome.
Waiting for your suggestions,

Indesign cc 2014 export to spreads not working

Hello
I have a book on indesign 36 pages, when I export to pdf (not interactive) I click the option spreads, low quality because it is a proof.
my problem is that some pages are exported as spreads but others are not being exported as spreads
help please!!!
thank you

If there are multiple pages within any individual file in your book, those can be output as spreads, but you cannot print a spread made from the last page of file A and the first page of file B even though they are together in the finished book.
If you need to have spreads, I'd export the entire book to PDF (as single pages), then place the PDF into a new .indd file using Scott Zanelli's script (InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files) and print your spreads from that, but really, do you need spreads for a proof?

Export to WMV cuts off - I have no dissolves

I see there's been problems exporting to WMVs and having the export cut off at a dissolve...but I don't have any dissolves. A co-worker has the same problem. We're both running FCP 7.0.2.
What could be the problem?
Lisa

Flip4Mac installs windows media components onto your Mac.
The free version installs the playback components, as well as a 'teaser' version of the encoder. It will encode, just not your whole file. It is installing components, so it works across the Mac platform.
Once you upgrade to one of the paid versions, you can encode entire files.
Your free version is cutting the encode short, not the playback.
I would suggest stepping up to the StudioHD version, you get much higher quality and much greater control of your exports.

Avoid interlace combing when exporting to wmv

Hi All,
I am running on an updated MBP with FCE 4 and flip4mac pro studio.
I can not seem to find an ideal setting when exporting to *.wmv to avoid interlace combing and poor quality (pixalated look).
Your guidance woudl be great ly appreciated.
Thank you,
Erik

Ronald,
In addition to Steve's very important questions, I have another:
What else is running on your computer (often launched "behind the scenes," at bootup), while you are editing? Most computers have a lot of unnecessary programs, and processes, that launch at start, and can really eat up computer resources. You can check to see what gets loaded with MSCONFIG, and then looking at the Startup and Services Tabs.
Good luck, and please let us know a bit more.
Hunt

There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor..

There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor untill now the monitor is black..

It maybe trying to boot from the incomplete install.
Try starting your Mac while holding down the Option key, it should then list all the available boot drives including the Mac OS X one. Boot from the Mac one and then you can wipe the damaged PC one or set the Mac to stay booting in to OS X.

Exporting to .WMV not finishing

Similar Messages

Maybe you are looking for