Exporting using exp and TRIGGERS=N doesn't work

Exporting using exp on version Export: Release 8.1.6.0.0 - with the option TRIGGERS=N stills exports with triggers. is it a bug ?
Any sugesttions ?

This is actually a known behaviour.
As of table level export, all the dependent objects are exported and is expected namely, indexes, constraints, triggers... and even restricting with other parameters set to n will not disable their export.
As of schema level export, the whole schema is exported and with this we can pose our restrictions like no constraints, no rows, no indexes, no triggers etc.. which will work because we have control.
For table level export we dont have control on individual objects. 10g solves your problem.

Similar Messages

I was given a used iPod, and the battery doesn't work for that long.

I want to take it to the Apple Store and see if they can exchange it or give me a new battery, but the iPod isn't registered under my name. My brother said that I have to give the registered name, but I'm unsure what it is, because who I got it from had gotten it from another person. Is it necissary to change the registered name, and if so how do I do this?

What apps are you using when your Macbook is running on batteries?
What do you have loading in your login items?
Open Activity monitor and see what's running under All Processes.
Were you playing games when your Macbook is running on batteries?
Did you turn off your bluetooth?
Do you have anything hooked up to your usb ports?
The above comments or questions factor in the way your battery last when using your Macbook under it's own power.

I just signed up for the export pdf program and it just doesn't work.

I used the program to transfer a pdf file into a document file. The new doc file left out some pictures, overran lines of type, completely misinterpreted caps and lowercase letters, and whole blocks of type overlapped or disappeared. Is there something I'm doing wrong, or does this just not work properly? ...

Hi kathrynb32616732,
You are likely not doing anything wrong. The quality of the conversion depends on the quality of the original PDF file. Please see Will Adobe ExportPDF convert both text and form... | Adobe Community.
Do you know what created that PDF? If it wasn't an Adobe app, the PDF may not be written to spec, and that could account for the conversion issues. You can tell what created the PDF by choosing File > Properties and looking for the PDF Producer on the Description tab.
Sometimes, you can have better luck by turning off OCR as described in this document: How to disable Optical Character Recognition (O... | Adobe Community (but you'll want to keep OCR enabled if your PDF was created from a scanned document).
Best,
Sara

Read the .dmp file exported using exp

Hi,
Could anyone tell me what option in imp i can use to just read or check whether schema that i am expecting exists in the .dmp file (exported using exp) or not before importing into the database. Also is there any option in the imp to search for the table in the entire dump file? Please let me know.
Thanks,
Nagarjun.

Hi,
In the import command, You can give Show=y and log file option. Show =y will run the import command but will not import anything and will create a log file that will contain all the statements in the sequence which will be executed when import is done. In that import file you can look for tables and schema what ever you want.
Regards

Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work

User Configuration/Policies/Administrative Templates
- Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work
Microsoft Word 2013/Word Options/Security/Trust Center/Trusted Locations
- Allow Trusted Locations on the network:
Enabled
- Trusted Location #1:
Enabled
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
Date: June 10, 2013
Description: Trusted Location
Allow sub folders: Enabled
The policy appears to apply to the client correctly by adding the following registry key and values:
HKEY_CURRENT_USER\Software\Policies\Microsoft\office\15.0\word\security\trusted locations\location1
allowsubfolders: 1
date: June 10, 2013
Description: Trusted Location
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
However, when you open Word Options/Trust Centre/Trust Centre Settings…/Trusted Locations
There are no trusted locations listed under ‘Policy Locations’
I have tried setting similar settings for setting the Shared Templates folder location and just like the trusted locations policy, the registry keys are created properly in HKEY_CURRENT_USER\Software\Policies however word doesn’t
seem to recognize these either.
This used to work flawlessly using the administrative templates for Word 2007 and 2010. Has anyone been able to get these policies to apply successfully, or know why office doesn’t recognize these settings from the Policies registry
Key?

This would have been an easy solution to the issue. Unfortunately it isn't the problem. This question was originally posted on another Microsoft site and
was transferred here and when it was transferred the path's changed from the original post:
\\server\sharedfodlername to //server/sharedfoldername. (I will edit the question to show up as it did in the original post) Not sure how that happened. This
is still an issue that I haven't been able to get working correctly.
As it turns out the 'New from Template' interface Word 2013 has developed is very bulky with large thumbnails and is not very customizable nor practical for an office
that has a large number of templates. Because I am unsatisfied with the display and performance of the 'New' template chooser I sought after a solution to change the way word creates a document from a template in another thread:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/how-can-you-change-the-display-of-templates-in/d49194b9-a6b4-4768-8502-7d7b50e9dd65 working through this issue with Jay we were able to develop
some VB script with handles a very large number of templates in a list view and it works much faster than the built-in Word interface. The above thread is how I've worked around trying to define a shared template location and I am quite happy with it.

My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay in store?

My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone

I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped

I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped I went into the camera app and tried to see if it would flash when I took a picture but I saw it light very faintly and hasn't done lot up since. Should I get the led replaced?

First, try bringing up Control Center by swiping up from the bottom of the home screen. Turn on the flashlight by tapping the icon in the lower left. Does the flashlight work? If not, perhaps you have a hardware issue.
If it works, check the top of the screen when you open the Camera app to make sure you have the flash on.

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

I use an online application that doesn't work with FF, but I had been able to use an IE plugin within FF and it worked fine. After the last update (3.6.12), it says plugin is not compatable with version. Help?

I use an online application that doesn't work with FF, but I had been able to use an IE plugin within FF and it worked fine. After the last update (3.6.12), it says plugin is not compatable with version. Help

go to '''TOOLS '''then '''OPTIONS''' then '''ADVANCED''' then '''NETWORK tab''' then '''SETTINGS tab''' and select the options '''NO PROXY''' click '''OK''' and '''OK '''again in the next screen. With that you have disabled the proxy settings.
''if you like to not disable the proxy settings choose'' : '''Auto-detect proxy settings for this network''' (it is in the same session)
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Cs4 and w7 use default masks on adjustament doesn't work

Hi
i installed cs4 on a fresh install of w7
and use default masks on adjustament doesn't work
enabled or disabled ,every time i add an adjustamen layer ,photoshop add a blanck white mask
thanks
is there a cure?

wrong look the screenshot
i resized the screenshots

When trying to move file and use command and drag, it doesn't move the file just creates a short cut.

When trying to move file and use command and drag, it doesn't move the file just creates a short cut.

Using command creates a copy.
If you want to just move a file, click on it, hold it and drag it to the new location.

I export using quicktime and it loads and acts like its working then when it is finished there is no exported file. It's as if nothing happened!

I have used imovie in the past for editing gaming videos but due to a software issue i have had to make a return to imovie. The issue is when i try to export either just by exporting movie or exporting using quicktime, it acts like it is working then at the end it finishes and there is no sign it worked at all. no exported file in any folder and no error message. also there is an error when i try to optimize but i can do without that if need be. Thanks!

I have used imovie in the past for editing gaming videos but due to a software issue i have had to make a return to imovie. The issue is when i try to export either just by exporting movie or exporting using quicktime, it acts like it is working then at the end it finishes and there is no sign it worked at all. no exported file in any folder and no error message. also there is an error when i try to optimize but i can do without that if need be. Thanks!

TRIGGERS=N doesn't work

Exporting using exp on version Export: Release 8.1.6.0.0 - with the option TRIGGERS=N still exports with triggers.
Is there a patch some where ?

This is actually a known behaviour.
As of table level export, all the dependent objects are exported and is expected namely, indexes, constraints, triggers... and even restricting with other parameters set to n will not disable their export.
As of schema level export, the whole schema is exported and with this we can pose our restrictions like no constraints, no rows, no indexes, no triggers etc.. which will work because we have control.
For table level export we dont have control on individual objects. 10g solves your problem.

My VGA output using Mini DisplayPort to VGA doesn't work.

Since I upgraded to Mavericks, my VGA output using Mini DisplayPort to VGA doesn't work. When I was using Mountain Lion, as soon as you plugged in the Mini adaopter into the mini display port, the screen would shrink and format to where it would project via a RGB cable to a projector. No such luck since Mavericks! Also, I had a lot of trouble with the DVD player when I tried to play a DVD and project it via a projector. It all worked seamlessly with Mountain Lion. Can anyone help me?

I think if you go to System Preferences >> Displays and Option-click on the "Scaled" radio button, it will show you all of the resolutions that you would have had before under Mountain Lion. I just upgraded to Maverick and my resolution preferences (mirrored on a TV using the Mini DisplayPort to VGA adapter, using 1280x768) were completely reset (my display was no longer mirrored, and the resolution on my main iMac screen became 2560x1440). I found my answer here: https://discussions.apple.com/message/23599645#23599645. Hope that helps.

On any page that I have to log in Firefox stops responding and has to shut down. I've tried resetting it and it still doesn't work.

I've been having this problem for a while now and I can't seem to fix it. Any time I log into any page, Firefox says not responding and I have to restart it. I have to run all of firefox in safe mode if I log out of my email or facebook. I've tried resetting FF and it still doesn't work.

''' "I have to run all of firefox in safe mode if I log out of my email or facebook. " '''
Please explain what you mean by '''all of firefox'''. You're either running in the Firefox SafeMode or you're not. There's no "all" or partial SafeMode.
Please see this: https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode

Exporting using exp and TRIGGERS=N doesn't work

Similar Messages

Maybe you are looking for