Exporting using quicktime only gives me stills

Hi,
I'm using FCP 4.5, and have been using it for a couple of years. This afternoon I was batch exporting a bunch of short videos, and when I viewed the results, they were all the correct length, but only a still image.
When I did the same operation yesterday, it worked properly. And when I tried to re-export things I'd previously exported properly, I'm only getting stills!
What gives? I haven't changed anything, nor have I installed updates.
Thanks!

Hi,
Thanks for the reply. I'm working with several source formats (DV, .mov, and others). They all seem to be suffering the same thing.
Our use of FCP may be slightly uncommon. We do speech research, and we usually need to generate many very short clips out of a longer one, so I segment a video, 'make independent clip', move to the asset pane, and re-name as appropriate. When I've segemented everything, I can export or batch export directly out of the asset pane (rather than the sequence). Up until very recently, this has been easily done.
I've done a little more experimenting now. Quicktime conversion works on the sequence, but not on the clips in the asset pane. And file/export/quicktime movie (as opposed to quicktime conversion) works from the asset pane. But I'm still stumped - I can't do what I need to do.
One more detail - it's possible that iTunes was updated around the time that this snafu started occurring.

Similar Messages

IMovie Export using Quicktime in 1080p gives error OSStatus error -2125

Hi, I am new to using iMovie, started using it few days back. So far i have been unable to "Export using Quicktime" in 1920*1080p option.
I was able to export using "Export to Quicktime" in 640*480p (.mp4 format) option and was able to use "Export Movie" with 1920*1080p (.mov format) option.
Trying to export using "Export using Quicktime" in 1080p always failed so far. I tried at least a dozen times with different settings. Initially i was getting the following two errors randomly, but later, the last 4-5 trials i keep getting only the first error.
1. OSStatus error - 2125
2. Not enough room in the heap zone.
Project details are - it is a 34 min. video and size came to 5.3GB when exported using "Export Movie" (.mov format) using 1080p option.
It indicates 2 hours to export it, takes 2 hours and interestingly, the OSStats error - 2125 error happens at the end of the export. I can see in the finder the increasing size of the file the process is creating. It has been a really frustrating experience with iMovie so far. I even tried duplicating the project with a different name and tried export, did not help.
I have >300GB of free space on my hard drive and 8 GB of RAM. I don't have any heavy applications running on the system.
I read forums about this error and tried the following so far with no help.
1. Tried changing names of the iMovie project few times to see if that helps.
2. Set the sleep settings of the computer as well as monitor to Never.
3. Reached out to apple support about it and they suggested me to setthe sleep settings to never and then try. But that did not help.
I am stuck with this error OSStatus error - 2125.
The settings I am trying with are:
Export to MPEG-4
H.264 video format
20Mbps bit rate
30 fps
One question is, once I exported a project in one format or setting, do I have to create a new project to export it in different settings or I can just use the same project?
Can someone please help? Any help about this is greatly appreciated. Thank you.

I am having the same issue. Have been searchin gfor 3 days for an answer. I am able to export as MOV file, but not MP4. I bought QT Pro 7 to convert THE MOV to MP4 and it doesnt work either. I then bought iskysoft Video Converter and it wont convert the MOV to MP4 either. (will convert smaller files)
I have 700 GB of free space on drive. I have tried a movie that is 3 hours, one that is one hour, and one that is 54 minutes..All same thing.. Error -2125. Although it will work with smaller movies under 30 mins.
Surely there has to be an answer to this? It seems it has been an ongoing issue for quite some time, yet there is no solution.

Export using QuickTime Conversion + SMB automount problems

I have noticed an interesting (read bad) behavior in FCP (5.0.4) - If I try to do an export using quicktime conversion with the destination being an automounted (via netinfo) smb share as opposed to a apple-k mounted share in m4v, 3g, mp4, image sequence, still image or quicktime movie - I get a File Error: Unknown Folder. However if I do the same export but in avi, wmv, dv stream, or flc formats, it works fine.
Trying to do the same export operation in quicktime pro produces an error -120, which is equivalent to directory not found.
Seems like a quicktime problem dealing with the automounted shares, anyone else run into this issue? Have a fix?
Thanks!
C M I

I know I can save locally + that it is tied to the quicktime components - I'm looking for fix/workaround that addresses the issue and streamlines my workflow, thats the reason I set up the automounter in the first place.
So it's clear though, quicktime has no problem with smb in a general sense, it only has problems w/ the automounted smb shares - manual or command+k mounting of smb shares offer no problems.
I use the automounting for two reasons: first is to emulate unc paths for rush render queue and second is to have consistent working paths to static content on a file server so final cut docs can be passed from editor to editor and link consistently.

Exporting using Quicktime in imovie

In iMovie, when trying to export project to make a Quicktime mov, I get an error message saying it doesn't find the imovie event. I've been storing it (and the clips) on an external drive. When I moved it to the main HD, it still can't find it. Do I need Quicktime Pro?... I'm just using the version 7 supplied with the iMac.

In iMovie, when trying to export project to make a Quicktime mov, I get an error message saying it doesn't find the imovie event. I've been storing it (and the clips) on an external drive. When I moved it to the main HD, it still can't find it.
To review the basics... iMovie '08 maintains its own resource database. This is likely needed due to the manner in which it names files during importation. While making "Finder" level changes to the name or location of you resources is immediately reflecting in the hard drive table of contents, such changes do not update iMovie's own internal database and iMovie '08 will no longer "see" them. Where the entire structure is moved manually and all data is left in tact, recovery may be as simple as just "pointing" the iMovie '08 "Event" window at the appropriate hard drive. Other changes, such as changing a filename in the folder may not so easily corrected.
Since you indicate you chose the external drive for the storage location during the import process and made no mention of your "Events" not being visible in this window, as well as, not being available for editing, I would normally assume the internal "database" is not corrupted. In addition, since you stated in your previous posting that the pre-set export option worked correctly, I would tend to suspect your problem is in the "Export Using QuickTime" module itself or in the location/disposition of your "project" resources. You could, for instance, have a bad/corrupted install of the iMovie '08 software or attempted to change something in the "Project" package itself which may be a required parameter for communication by the "Export Using QT" module. These are just initial "guesses" on my part.
Do I need Quicktime Pro?... I'm just using the version 7 supplied with the iMac.
You shouldn't. iLife '08 has its own access to the QT "structures" embedded in the Mac OS and, while nowhere as extensive as the capabilities of QT Pro, do allow for many conversion work flows. You could, for instance, open a file previously shared to the "Media Browser" or exported to your hard drive using the "Export Movie" preset option in GarageBand and see it you can convert it to another QT compression format. If you can, it would tend to support the idea that your problem is limited to the single iMovie '08 export module and not the location of your resource files.

Exporting using Quicktime - but file never appears??

Ever since I downloaded the latest iMovie '11 software update (9.0.7), every time I try to export using Quicktime, it takes two hours to export, shows no error messages of any kind, but the exported film NEVER shows up where I saved it to (or anywhere else on my computer). Has anyone else had this problem?
I can't export using any of the other options because the film is so large (the Quicktime export compresses it enough to upload to Vimeo, while exporting it straight to Vimeo does not). The Quicktime export (and all the settings still in place) worked perfectly before I installed the 9.0.7 update.
I need to get this film off my computer pronto. Please help???

Hi Mike:
Apologies for the long delay in response; have been working on other things of course.
I don't know how to use OS X's postscripting feature, but I did try and succeeded in creating a .ps file. When I try to open the file, however, it tells me there is a postscript conversion error and the file cannot be converted to pdf.
Manually distilling the file is exactly where the problem arises.
For giggles, I tried to select the OS X's pdf'ing feature instead of postscript or distilling, and it worked instantly! The dimensions are correct when I open it up, and the file size is large enough to indicate to me that the resolution is likely sufficiently high. I would not know for sure of course until finding out the hard way after sending it to the printers, but it seems to be a use-able file.
So, it seems that this is a pseudo-solution, at least so that I have a tool to bypass the problem when I next encounter it; however, I wonder if you have any ideas about how to actually fix the glitch? Does it have to do with the sorts of images that reside in the KeyNote file; if so, which file types does pdf not like and should be avoided?
Thanks,
Heide

Exporting using Quicktime - PC Users can't see

I have created several movies that I am exporting using Quicktime. They are generally large files - 300MB or so. Mac users can see them fine - only some PC users can see them and generally that is using Firefox. Any suggestions on how/what to do? These movies are located on a school server (old) but I do not believe that is the issue..
Many thanks.....

jphelan wrote:
I have created several movies that I am exporting using Quicktime. ...
what are your settings in the 'Export with QT' dialog.. ?

Error -61 and -43 When Exporting using Quicktime

I have recently began receiving errors when I try to export using QuickTime. When I try to export to my external hard drive I get an error -61. When I try to export to Documents I get an error -43
These errors began after I had imported a bunch of home videos yesterday which were pretty massive and filled up my hard drive. I then began to delete some of my videos from my Event Library and Projects that I no longer needed.
It was after I did this that I began to experience these errors.
Any tips, suggestions, or advice would be greatly appreciated.

How are you deleting your movies to free up disk space? Are you doing them in iMovie by rejecting them? If so, that's only 1/2 of what you need to do. In the event where you deleted movies, from the pop-up menu at the bottom of the events, choose "Show rejected only" . Then click the button that says "Move rejected to trash" in the top right. You then have to empty your system trash to free up the space.
Lemme know if that works.

Should I export via Export Movie, or Export using Quicktime?

Hello,
I am making a "yearly video" of our family video clips. The movie is 45 minutes long. I have an HD camcorder though I have uploaded all the video as "large" as suggested since I dont have a Bluray burner anyway. I know how to export as a DVD file, but if I just want to create my movie to play on my computer, what is the optimal way to do it where I loose the least quality? This way I can save the file for later, should a better "burning" situation come about in a year or two. Should I export movie as "HD" or use "Export using quicktime" or some other option?
Thank you!!

Sorry.
By all DVDs until the master, I mean any preview copies that are used to preview content only, not video quality.
I export a reference movie, which means a movie file that refers to all render and media files on my drives, instead of creating a new self-contained quicktime movie. By using a reference movie, I save drive space (they're much smaller). But reference movies will only work on a machine that contains all the media and render files.
I've used reference movies in Sorenson Squeeze before, so they may work in BitVice as well. But I much prefer Compressor to any other option.

Export using QuickTime...

Hello,
I recently started my second video project for my family which is converting Video8 and Hi8 tapes to digital video and had a few questions regarding "Export using QuickTime".
I utilize a Digital8 camcorder to play my analog Video8 and Hi8 tapes with a DV FireWire cable so the camera does the analog to DV conversion when importing into iMovie 09. Next, I utilize the MPEG Streamclip to do the DV clip conversion using 720 x 480 (DV-NTSC) frame size settings and apply contrast & color alternations. Lastly, I import the new .mov clips into iMovie, create a new project, do some trimming and now ready to export.
Question: I don't plan to share to iTunes, iDVD, Media Browser, YouTube or MobileMe Gallery however I would like to export and put the video on a media center device. That leaves me with "Export with Quicktime" however there are quite a few export options, for example:
Movie to AVI
Movie to DV Stream
Movie to QuickTime Movie
Which export option is best to use in terms of no loss of video and audio?
Also, there is additional settings, Options button, to configure video settings (compression, frame rate, data rate, quality, dimensions) and sound settings (format, channels and sample rate & size). Are these settings or defaults good to go out-of-the-box or do I need to tweak?
Any experiences or recommendations on export options and video and sound settings would be appreciated.
Thanks,
Dave

"DV will import just fine into iMovie 09 however when you render or export, iMovie uses 'single field processing' meaning every other horizontal line of the video is thrown out. In effect, reduces the sharpness of the footage. By using MPEG Streamclip, I am converting it into another format and then importing it back into iMovie."
I'm aware of the problem and I'm very curious about your solution. How exactly do you avoid the field drop issue? I thought you said you went from DV back to DV, which I thought would not have any effect on the field issue. Most other reports of working around the issue involve de-interlacing with, eg. JES Deinterlacer.
"Format: H.264, 640 x 480, Millions
Format: AAC, 2 channels, 44100 Hz
FPS: 29.97"
These are the AppleTV export defaults I guess? You could accomplish the same thing by an export via Quicktime, and then you'll get more control. IMHO, Apple's presets were chosen to produce "pretty good" quality at small file sizes. That's certainly a reasonable approach and they probably made a very well calculated compromise. But my preference is to sacrifice time and disk space to eke out a bit more image quality if I can.
Either way, these settings are very close to what I would use anyway, if your original video is 640 x 480. I thought my SD camcorder gave a bit more resolution before it croaked. Sorry I can't check it right now. Just be sure you're not losing resolution in the process. You could also bump the audio to 48 kHz if the input audio is at that sample rate. In the QT export, the other thing you can adjust is quality level; the default for AppleTV is probably "Good" or "Better" and single pass compression. Choosing "Best" multi-pass compression will take longer and give you a bigger file. You'll have to judge whether it's worth it. And just because you can see things on your monitor doesn't mean you'll see it on your TV - you have to test.
It's frustrating, but there really is no right answer to all this stuff, because the choices you make depend on your source and your display, and everything in between.

Export using Quicktime Conversion Save Prompt Freeze

I'm seeing a bug when I export using Quicktime Conversion using Final Cut Pro 7. From the main save prompt window, if I open "options..." and make my export adjustments and return back to the main save window again, it does not initiate a save when I click the save button. Further, it will not let me cancel out either. The save/cancel buttons will click blue for a moment as if they were pushed, but nothing happens - the save prompt window is totally unresponsive. My only course of action is to force quit. (note: the force quit window does NOT report FCP as unresponsive.) This problem does not happen every time, but enough to be a major annoyance. Has anyone had this issue? Thank you.

Your lunch break long wait rules out any "frustrated after a few seconds" reaction and would certainly be long enough for a drive that has dozed off to react.
Some particularly processor intensive formats could conceivably have a short delay before something starts to happen.
Writing to the system drive is not something I would personally do -I have dedicated storage for my entire video workflow. But this would also rule out a sleeping drive. The system is constantly being written and read.
If you are writing particularly large files to the system drive, bear in mind that a good chunk of the "tons" of free space is allocated to "swap" files -data that can't be written into RAM is off loaded to the hard drive. Depending just how large the swap files are and how large your video files are, there could be a delay in reallocation of swap file space to allow the video files to be written. Having less space for swap files can cause the OS to slowdown. Drives will generally become less responsive, the fuller they are.
Note that I am by no means an expert on this, so the percieved slowdown may be less significant than what the paragraph above implies.
Run Disk Utility and make it a regular part of your maintenance routine. Writing and reading the huge amounts of data that are used in video production can cause problems with the directory structure. Better to catch it early and fix it, directory damage is culmulative. You might not notice it until your files are no longer accessible.
How is the system response when you export a project as a self contained movie using current settings (same as your Timeline)? Exporting with QuickTime Compression always recompresses your video -even when writing using the same codec as the Timeline already uses, so it will take longer to process.
Self contained with current settings is the workflow that I always use. The resulting "master" file is brought into Compressor to make the deliverables. This also frees up FCP and lets me continue editing while compression runs in the background.

Missing with chapter markers after Export Using QuickTime Conversion

I have my FCE workflow setup as follows:
I create the sequences using relatively large video source files, in Apple Intermediate Codec (AIC).
Then, I use Export -> Using QuickTime Conversion to H.264 Codec, but my chapter markers are lost.
If I use Export -> QuickTime Movie, the chapter markers are preserved, but the codec is still AIC.
I need a compressed file with chapter markers. What am I missing?

One more time: "Where are you looking at the exported file? After making a DVD or somewhere else?"
Can you answer this for me? How are you looking at this material? Off the DVD you've burned? Is that what you're saying? Comparing the QuickTime Movie export to a DVD burned from a PhotoJPEG export? Or are you playing it from the computer to HDMI? If so are you using the QuickTime player? Is the QT player set to high quality playback? Yes, PhotoJPEG (not JPEG Photo) is a very large file especially at full quality. You probably don't need any more than 75% quality. I'd be very surprised if you say you can see the difference between 75% and 100%.
The length of the video is important not the size of the disc. iDVD's compression is fixed by the length of movie and the amount of content that has to be encoded.

Export Using QuickTime Conversion To Windows Media (.wmv)

I have Final Cut Pro HD version 4.5 that runs on my G5. I have a problem when I try to export video to Windows Media file (.wmv). After I select Export / Using QuickTime Conversion and than choose Windows Media in Format box, Final Cut does compile a .wmv file. The only problem is that it's only 30 sec. long when the original video that sits on Timeline is 2 mintues long. When I export the same video to Quick Time file, everything works perfectly and the duration of .mov file is the same.
I tried to set in and out points, but it made no difference.
So now I can't make a file that can get played on Windows computer that has only Windows Media player. And .avi file is not an option since I can't get one compressed enought, so it turns out too big. I understand that I can buy some third party software to make .wmv file, but I want to make sure that out of box Final Cut Pro HD 4.5 can't make Windows Media files before spending extra money.

You need to buy the full version of flip-4-mac to encode/save to a wmv. Sounds like you only have the trail/free playback version...
You need either the pro version or studio version:
http://www.flip4mac.com/wmv.htm

Quality difference between exporting via Export vs. Export using Quicktime

In iMovie 08, is there a difference in quality between Exporting a movie at the largest available size via the "Export" menu item, versus using "Export using Quicktime"?
I have a very long movie of family movies (9 hours) and have been unable to do a straight export (gets to the end after 25 hours or so and gives me a non-descript "can't complete" error message), but would rather split it up into several smaller files than compromise on quality, if there is such a compromise using the Quicktime function.
If I do go the Quicktime route, what settings should I choose, or just the default. Also, Export using Quicktime option makes a .mov file. What file type does the straight "Export" function create?
thanks much!
Neil
[email protected]

What file type does the straight "Export" function create?
All presets are compressed as H.264/AAC content.
Also, Export using Quicktime option makes a .mov file.
The MOV file container is "generic" and may contain any form of compressed data compatible with the QT components installed on your system and which the accessing application will allow you to use. In the case of iMovie '08, proprietary and third-party components are not allowed even if installed.
If I do go the Quicktime route, what settings should I choose, or just the default.
You use the audio and video codec and settings best suited to the goals of your export. Since you have not mentioned what your are trying to do with your exported content, it is impossible to make any recommendations here.
I have a very long movie of family movies (9 hours) and have been unable to do a straight export (gets to the end after 25 hours or so and gives me a non-descript "can't complete" error message), but would rather split it up into several smaller files than compromise on quality, if there is such a compromise using the Quicktime function.
A 9 hour export at the largest (960x540) dimensions implies a 4.128 Mbps data rate which equates to a file on the order of about 16 GBs in size. As you did not mention which export/sharing option you were using or if everything was being done on a single hard drive, such an export may require a total of 48-64 GBs of available storage space for temporary, Media Browser, and target/duplicate file(s) plus free memory for rendering purposes. So one of your potential problems could be file space availability.
As a general rule, increases in the duration of your target movie may require geometric increases in either available file space or the time it takes to perform the processing. It is, therefore, usually better to "chunk" your projects (break them into smaller, more manageable segments than to process them as a single project/file) and process the segments independently. In addition most people will not watch a 9-hour movie in one sitting in any case. (I have gone as high as 5 hours but even the product of this effort amounted to less than 4 GBs of file space.)
To "chunk" an iMovie '08 project, simply duplicate your completed project as many times as needed and then divide each into manageable segments and deleting segments so as to remove the duplicated segments. I would likely consider 6 segments targeted at about 90 minutes each but division of content anywhere between 60 and 120 minutes would probably be considered "manageable" for most purposes.
In iMovie 08, is there a difference in quality between Exporting a movie at the largest available size via the "Export" menu item, versus using "Export using Quicktime"?
There should be no difference in quality if you use the same compression formats and target settings. Changing either the compression format (each of which may have its own particular characteristics) or the settings (such as the data rate which directly affects both file size and quality) will usually produce visual differences in your product.

IMovies - Export Using Quicktime - can't find the finished file - help please!

Please help. I exported several imovies projects to a designated file on my mac, using Share - Export using Quicktime and then I uploaded them to Youtube.
I did this successfully several times, now when I export a project, it takes about 45 minutes to export it, then I can't find them anymore.
I have read several threads, which suggest looking in the iMovie projects folder and locate your project Right-click to get to "show package contents" and they are not there.
It looks as if it goes through successfully, no errors but this is so annoying as I am wasting hours sharing and then can't find it. Please help anyone.
Thanks

Hi Gee
I originally spent about 10 hours uploading 3 clips directly from imovies to Youtube to a private channel and they couldn't find any signs of my 3 uploads. So I read threads that said export to Quicktime from imovies and then load them to Youtube that way. I did that for 3 short, 10 minute videos and it worked fine. It changed the thread to .mov and it worked.
Then perhaps I changed something (not sure what) but now when I use Export to Quicktime, it spends 1 hour or so doing the motions and completes but when I go to the allocated folder to retrieve it. It can't be found. I read threads and this seems to be a regular occurrence but I haven't read any replies that has solved this issue.
Hope that's clearer.

Exporting using QuickTime informations

I've a camcorder by Sony, HDR-CX305. It makes AVCHD files at 24Mbps data-rate.
I have not problem to import and work with them but, for watching my movies on PS3, I use to export in MP4 with codec H.264.
I don't know what number I have to use for best result. I've tried with 24000 kbps data-rate and it seems be good but I like to know from who has more experience with H.264 codec.
If any person has best method to export on PS3 please, let me know it.
Thank you.

Try this.
Export using QuickTime.
Compression type mpeg4.
Video options h.264, 1920x1080, data rate 16000 Kbps.
For keyframes choose automatic or 24.
You can adjust data rate up or down if you like.
Message was edited by: AppleMan1958

Exporting using quicktime only gives me stills

Similar Messages

Maybe you are looking for