Exporting Versions - not all are exported

I have tried this twice, once with it set to export 50% JPG without a watermark and once with and both times, of 187 images to export only about 100 are exported. I'm doing this to a folder on my desktop and using Aperture 2

I have found that if the "preview" isn't finished rendering, it wont export.
If I use the retouch brush too much, preview wont render and I cant export.
Finally I went through the whole aperture library to update all the previews before trying to do anything else.
Aperture 2 was hanging on 7 previews.... through elimination, I figured out which ones they were and adjusted them so that the preview could be rendered.
Note: when trying to reapply the "retouch brush" adjustments I hade made, the preview wouldn't render...
Hope this helps....again, in this case, when previews aint done, export will take forever and sometimes fail....
Oh yeah, the program has crashed trying to render 1 preview!

Similar Messages

  • Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

    Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

    What's more, they don't even show on the bluetooth devices list..

  • I have multiple calendars set up but not all are displaying in iOS 7 notification center.  I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary.  Can't get it to show the details of the event.  any ideas?

    I have multiple calendars set up but not all are displaying in iOS 7 notification center.  I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary.  Can't get it to show the details of the event.  any ideas?

    have you tried rebooting your computer?

  • Importing a project into PE 12 trial version, not all audio tracks play back!

    I'm trying the trial vesion of PE 12.  Imported a project that I had created with PE 9.  Everything appears to have been imported, including all the audio tracks.  But when i play it back, some of the audio tracks are completely muted, while others, are fine and I can hear it.
    Any idea what can cause this?

    With "muted" Audio Tracks, I would look at a few possibilities, and especailly with a Project created in an earlier version of PrE:
    Open Audio Mixer, and look to see if any Tracks are Muted.
    Play the Timeline, and observe the Levels in Audio Mixer, and also whether there is any movement of the "sliders" in Audio Mixer.
    Observe which Audio Tracks your Audio Clips are, in the Timeline, and report those please.
    Making sure that Keyframe Display is set to Volume in your Audio Clips, are there any Volume Keyframes?
    I am sure that others will have a few more ideas, and questions.
    Good luck,
    Hunt

  • Shifting images between projects - not all are displayed

    So I'm importing say 2000 images into a new project, call it Project 1. Obviously I can't archive 2000 RAW files in one project on a DVD, so I create additional projects and end up with Project 1A, Project 1B, Project 1C, Project 1D etc, each one about the right size for a DVD burn when I've finished with the images.
    I've learned from experience to let all the previews generate before shifting images; if I don't the thumbnails sometimes get mixed up and image 200 shows the thumbnail for image 457. Bit weird, but fixable.
    What I haven't found a solution to is the way that these new projects will sometimes only show 60-ish% of the images that have been moved to them. The images are there, but when I scroll down to the scroll bar limit, I've only got about 2/3 of the way through the images. If I click back to anothe prroject and come back to the problem project, sometimes it will display correctly, sometimes it takes a few tries.
    Does anyone have any ideas on what's causing this, and how to stop it happening again? It's not a big problem, but I'd like to solve it. I could import set volumes of images into new projects, but importing once and then shifting works much better.
    Thanks.

    Thanks Ian,
    Now that you mention it, I get the same problem with my Save As dialog box; I'm given the list view minus scroll bars, but every time I use it. Must inform the Captain...

  • Opmnctl not all are starting automatically

    after rebooting.
    opmnctl status shows coreapplication_obips1 as down.. but all others are Alive..
    it starts fine when I start it.. but why doesn't it automatically start when the server is rebooted..
    Windows server 2008 32bit...

    after rebooting.
    opmnctl status shows coreapplication_obips1 as down.. but all others are Alive..
    it starts fine when I start it.. but why doesn't it automatically start when the server is rebooted..
    Windows server 2008 32bit...

  • Each time I check my mail some emails, not all, are downloaded time after time. Even weeks after they were first read and have been deleted from mu computer

    It's all there in the sentence above

    Firefox doesn't do email, it's strictly a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, please '''Tag''' this thread as being for Thunderbird in the right-hand column of this page. This question currently is in the Firefox queue for answers.

  • I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some but not all are also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?

    I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some are now also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?

    Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.

  • HT201272 my purchases are showing as downloaded but not all are actually downloaded how do i get them to download?

    how do i download purchases already showing as downloaded but were never actually downloaded?

    If they show as 'downloaded' in the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes then are they listed in your iTunes library e.g. if they are music tracks are they shown in the Music section where you would normally click on them to play them ? If they are then iTunes is seeing them and assuming that you have them somewhere, even if you don't have the actual music (or film, TV programme etc) file on that computer - try deleting that entry from your library and they should get the cloud symbol against them in the Purchased link for re-downloading.

  • Not all iTunes Files not showing up on External HDD

    My old TC (the flat model from back to 2008 I think it was) broke down the other night so I removed the WD 2.0TB HDD (containing over 30'000 music files) to run this as an external HDD. I had swapped the original 500Gb with a 2TB drive which worked super for a couple of years.
    Anyway, before all of this happened all songs showed up on iTunes and each single one could be played correctly from iTunes (without the ! should the file not be found) so all files were located through iTunes to the correct directory. Only one directory for my Music files...
    Now, when I connect the HDD through an USB cradle (nothing has been touched on the drive) only a fraction of the files actually show up in the directory which is very odd indeed? I believe it was the same when the thing was actually working but didn't give it a think as it was doing what it was expected to do.
    Next step was that I copied the whole HDD over onto my MAC and sizewise all (?) the files came over but still not all are showing...
    So, how can I make sure all the files are being included as I want to move them all over to my new 2TB TC?

    Thanks Limnos for taking your time with this.
    Here's what happened
    1) All my Music was stored on a TC 2.0TB WD hard disk which I shared with my partner.
    2) All music in iTunes were mapped to this specific location and only this location.
    3) When opening the folder on the TC only a fraction of the actual music folders were available to see (i.e. Artist The Wonder Stuff folder was present and in this folder only 2 album folders were found when in fact there should have been 12)
    4) All songs in iTunes did play correctly so if i wanted to listen to one of the The Wonder Stuff songs they would all play (even albums that did not show up in the artist folder from above).
    5) When clicking show file in finder, the file would show up and then again when going back manually into the folder as above.
    6) TC dies on me. No more power.
    7) Took out the HDD and put it in a cradle to extract the songs.
    8) Right click on the folder shows there are about 35'000 files which sounds right BUT only a fraction of these can be seen.
    9) Now I cannot do the show in finder through iTunes as the directory no longer exists (the TC died and I threw it away, except for the HDD).
    10) The files are on the HDD but I cannot see but a fraction of them when opening the folder...
    I hope this makes it a little more clear.
    I honesty do not know what to do as I know the files are there but cannot see them and thus map them in iTunes... :-(

  • Not all RAW files recognised by Aperture 3

    I am running the lastest update of Aperture 3 with the most recent RAW compatibility pack. (Can't remember what number but I updated last night).
    I have a Leica D-Lux-5.
    I import RAW photos using the card slot on my iMac i5 running Snow Leopard.
    The card is a Sanddisk Extreme 16GB (might be 8GB)
    The problem is that some (not all) are listed as 'unsupported file type' where the photo thumbnail should be.
    Has anyone got any thoughts?
    Craig

    Ir. Bob,
    Thanks for the response. Not sure if this worked - The RAW's I took last night still show up as 'Unsupported Image Format' - but then it may not work retroactively - I will take another sample batch and let you know.
    Thanks,
    Craig.

  • When exporting an album to Snapfish or Facebook, not all the pictures will transfer.  The same photos are missing in each export.  Help.

    I have version 10.7.1 with 4 GB's.  All software is updated.  Not all the jpegs will transfer to a web site.  And it's the same pix not exporting, not a random selection each time.  All have a rating of "not rated or better".

    Are the images inside stacks?  Only the Stack Pick goes over.
    DLS

  • Stsadm Export "This constraint cannot be enabled as not all values have corresponding parent"

    I am trying to export a sharepoint site using the command "stsadm -o export -url http://prefix.domain.com/sites/sitename -includeusersecurity -filename c:\sitename"
    I have already done this on about 30 other sites.  This site is failing on export with the following message.
    [11/9/2009 3:39:39 PM]: FatalError: This constraint cannot be enabled as not all values have corresponding parent values.
    at System.Data.ConstraintCollection.AddForeignKeyConstraint(ForeignKeyConstraint constraint)
    at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign)
    at System.Data.DataRelationCollection.DataSetRelationCollection.AddCore(DataRelation relation)
    at System.Data.DataRelationCollection.Add(DataRelation relation)
    at System.Data.DataRelationCollection.Add(String name, DataColumn[] parentColumns, DataColumn[] childColumns)
    at Microsoft.SharePoint.Deployment.ListItemObjectHelper.GetNextBatch()
    at Microsoft.SharePoint.Deployment.ObjectHelper.RetrieveDataFromDatabase(ExportObject exportObject)
    at Microsoft.SharePoint.Deployment.ListItemObjectHelper.RetrieveData(ExportObject exportObject)
    at Microsoft.SharePoint.Deployment.ExportObjectManager.GetObjectData(ExportObject exportObject)
    at Microsoft.SharePoint.Deployment.ExportObjectManager.MoveNext()
    at Microsoft.SharePoint.Deployment.ExportObjectManager.ExportObjectEnumerator.MoveNext()
    at Microsoft.SharePoint.Deployment.SPExport.SerializeObjects()
    at Microsoft.SharePoint.Deployment.SPExport.Run()
    I checked the SharePoint logs and the error message in there is the exact same.  Nothing is in the windows application error logs.
    I looked at what it was trying to do before the error and it failed on a task list.  I tried deleting the task list and trying again and it bombed on a document library next.
    I did some googling and found a hotfix http://support.microsoft.com/kb/955594 I tried to install it, but I have SP2 installed and therefore it said that the expected version was off.  Im assuming since I have SP2 and that hotfix is dated in 08 that it should be included in SP2 anyways.
    Does anyone have an idea on what is going on and how to fix it?  I am trying to migrate this sub site to a new server and set it up as a new site collection.

    Good you caught that ... somethings would have shut down at the 90day mark...
    Would you humor me and tell me what this does.. Note I changed the order of a few things, added a .bak to the filename and also added versions. 
    If this errors would go into the Windows Event Viewer and look for anything SharePoint related, then look at security logs and see if there are any errors. 
    stsadm -o export -url http://prefix.domain.com/sites/sitename -includeusersecurity -filename c:\sitename.bak  -includeusersecurity –versions 4
    Kris Wagner, MCITP, MCTS
    Twitter @sharepointkris
    Blog: http://sharepointkris.com

  • Using lightroom 5.7.1 not all the meta-information is copied when exporting pictures

    using lightroom 5.7.1 not all the meta-information is copied when exporting pictures: city and country are not copied, although this information appears if i open the original file in photoshop. if i export this file via lightroom, the information dissappears.
    does anyone know how to solve this problem?

    thank you!
    although i did not change anything updating from lightroom3 to lightroom5, this box was automatically checked in all presets. now i unchecked it and everything works fine.

  • How do I export pictures from my IMac to my iPad.  I have only certain albums I want to export and not all my albums?

    How do I export pictures from my IMac to my iPad.  I have only certain albums I want to export and not all my albums?

    You can select only the albums that you want to sync in the photos tab of iTunes when you sync your iPad. If you are using iPhoto it is very easy. Simply select iPhoto in the Sync Photos From heading and then select the albums that you want to sync.
    If you are using iTunes 11 - enable the side bar by going to View>Show Sidebar from the iTunes Menu. This explains how to sync photos.
    iOS and iPod: Syncing photos using iTunes - Apple - Support

Maybe you are looking for