Exporting video holds on the second 'clip', but audio exports correctly

i'm exporting a project from imovie, i have a number of clips in there (which was originally a single video, but split up) and an audio track. when i first exported it as 'web', it worked fine, but when i tried to increase the quality settings via exporting to quicktime, it exports video up until the end of the first clip, and then just holds on that frame until the end of the video. the length is correct, and the audio exports correctly, but the video is just still.
any thoughts?

EmmaBean
What version of Premiere Elements and on what computer operating system is it running? Have you created the narration in Premiere Elements
using the Narration Tool? Do you have the problem in the export if you move the narration clip to one of the numbered Audio Tracks before export?
Are you using the SmartFix feature in this project? If so, have you checked your background foreground settings?
But, before that, is the sound on all the audio tracks OK when evaluated in the Edit area? Is the sound a problem only in the export?
If you are having sound problems in the Edit area before export, are you adjusting the volume while viewing the Audio Meters
typically found under Window Menu/Audio Meters.
Let us start here and then decide what next.
Any questions, please do not hesitate to ask.
Thank you.
ATR

Similar Messages

  • I can import my first clip to the video library, but not the second clip. I tried dragging-dropping and using the "E" key, but only the first clip will show up in the library. I use IMovie 9.0.9 and OSX 10.8.5. with no problems until yesterday.

    I can drag my first clip from the New Event window into the Project Library, but not the second. I can highlight the second clip in the New Event window, but it won't "drag". The "E" key works for the first clip, but not the second.I've been using IMovie daily and the problem just appeared. No upgrades to the computer and no new software installed.  IMovie 9.0.9 and OSX 10.8.5

    Thanks victoryhat.  I learned some new things from this very clear tutorial.  But it didn't answer my question about why the titles don't stay with the video when I export it.
    He did mention something that might be a clue however.  When he talked about importing a title he created as an image, he noted that he was careful to make the image the same size as the video he was adding it to: 1280 x 720.  Since I took the video with an iPhone in the vertical position, my video image isn't the same size and orientation as the titles.
    Maybe there is a way I should be setting the screen for this size???  I'll go back and play around.  Meanwhile thanks for alerting me to Gary Rosenzweig's MacMost tutorials.  Very clear.  I'll look for more.

  • I used to export cut clips to tape but recently - to keep having the exact same video-quality as the (analog) source! - I export simply to external HDs (so, to the computer)... I recently bought the PREM 13-verssion and I have tried (I think) éverything b

    I used to export cut clips to tape (version 9.0)  but recently I bought the 13.0 version of PREMIERE and - to keep having the exàct same video-quality as the (analog) source! - I export simply to external HDs (so, actually to the computer)... but whatever I am trying  I notice that when I check the export-material with the original clip the first is NOT ONLY SMALLER but ALSO DOES NOT SEEM TO HAVE THE SAME RESOLUTION, DETAILNESS, SHARPNESS (or whatever you may call it)... What am I  doing wrong? WHICH SETTINGS DO I HAVE TO MAKE IN ORDER TO KEEP THE SAME IMAGE-QUALITY (or even to enhance it) IN STORING ON THE COMPUTER ?!     Thanks, RVH

    How are you exporting?

  • I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played.

    I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played. I tried again with some different clips and some worked and some didn't. This hasn't happened before. What should I do? (I am using iMovie '09)

    No guarantess but try smc and pram resets,

  • I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

    I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

    If it won't turn on then the monitor is dead (power supply?, video circuits?).  Not worth repairing.
    If you have a new iMac then it has thunderbolt.  So exactly what is that monitor you are trying to connect?  For TB you can connect a mini-displayport monitor.   Probably (not 100% sure with TB) can use dvi or vga too if you have the appropriate adapter.

  • How can I export a small iMovie 9 project for someone else using iMovie 9 in a way that they will be able to edit all the separate clips and audio?

    I've tried simply copying the project - but of course, that no longer contains the separate clips and audio used to create the project.  Is there some export function I'm missing - or do I need to just gather up the clips and audio used in the project myself and send those?
    Thanks.

    You need to export your project via the Share command.
    Share > Export Movie.... (or Share > Export using QuickTime).
    That will render your project (combine and set all the events, stills, audio etc).
    When completed you can then take that exported file and import it into iMovie on another computer (or back into your own) as a new Event.
    You can then start a new project, load that event file and continue editing.
    Z.

  • Any way to export videos and preserve the original creation date?

    I recently shot video using an NEX-5N and AVCHD as the format. Since Aperture cannot playback this format, I converted the videos using Handbrake to mp4 (H.264), and then used A Better Finder to change the creation date of the converted file back to the same date as the original file.
    Importing this converted file into Aperture works great, and the imported file shows the correct metadata of the original creation date, not the date of the conversion.
    But when exporting this file from Aperture, it seems like Aperture does not embed the date as metadata, and thus the only date associated with the exported video is the file-system date attached to the file, which will of course be the date of the export. 
    I assume this problem applies to ANY video imported into Aperture, not just those that have been converted.
    Does anyone have a method for exporting video and having the original creation date remain?  This is obviously a problem when exporting videos one-by-one, but would be a bigger problem if I ever wanted to export my entire video library from Aperture into another program...all the video files would have the same date!
    Any feedback would be greatly appreciated!

    EXIF data and video files is even more of a gray area then EXIF data and stills.
    I don't do much video in Aperture so I'll take your word for it that the data isn;t imbedded into the file. In that case the best I can see is to create a custom export preset and  include the Image Date in the filename. Not great but you at least have the data and you might be able to have a script use the date from the filename and somehow add it back into the file.

  • I used to be able to open a second tab to get to another web site without closing the first one....now I can see the second tab but when I click on it nothing happens...

    I used to be able to open a second tab to get to another web site without closing the first one...now I can see the second tab but when I click on it, nothing happens..

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    Your system details show that toolbar in the user agent as AskTbARCD/3.13.1.18107
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • How do I view two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.

    Basically I want to combine to clips with correct timings. For that I want to view the two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.

    see my reply in your other post:
    You're familiar with the TRIM-tool?
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632caff
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d8e4
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d9ae

  • I have a 2 ibook g4's this is the second one but I started it up and all that happens is the apple logo comes up on a white screen and then nothing happens what should I do?

    I have a 2 ibook g4's this is the second one but I started it up and all that happens is the apple logo comes up on a white screen and then nothing happens what should I do?

    Reinstall OS X.

  • When I export to Word, only the second page is editable.  Page one comes in as a picture.  Help?

    I'm using Adobe ExportPDF.

    Here's the file I'm working with.  See if you have any luck.
    Tad <removed by admin>
    Date: Mon, 14 Apr 2014 14:22:31 -0700
    From: [email protected]
    To: [email protected]
    Subject: Re: When I export to Word, only the second page is editable.  Page one comes in as a picture.  Help? When I export to Word, only the second page is editable.  Page one comes in as a picture.  Help?
        Re: When I export to Word, only the second page is editable.  Page one comes in as a picture.  Help?
        created by StacySison in Adobe ExportPDF - View the full discussion
    Hi Jon,
    Try placing your curser in the middle and click on that page a few times. Often this will make it available for editing.
    Let me know if that works!
    Regards, Stacy
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6298150#6298150
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: When I export to Word, only the second page is editable.  Page one comes in as a picture.  Help?
    To unsubscribe from this thread, please visit the message page at Re: When I export to Word, only the second page is editable.  Page one comes in as a picture.  Help?. In the Actions box on the right, click the Stop Email Notifications link.
          Start a new discussion in Adobe ExportPDF at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip.  I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

    When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip.  I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

    This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
    (PS Everybody please make noise on this one so apple comes up with a solution.)
    < Edited by Host >

  • I used to export cut clips to tape (version 9.0)  but recently I bought the 13.0 version of PREMIERE and - to keep having the exàct same video-quality as the (analog) source! - I export simply to external HDs (so, actually to the computer)... but whatever

    I used to export cut clips to tape (version 9.0)  but recently I bought the 13.0 version of PREMIERE and - to keep having the exàct same video-quality as the IMPORTED-CAPTURED (analog) source! - I export simply to external HDs (so, actually to the computer)... but whatever I am trying  I notice that when I check the export-material with the original clip the first is NOT ONLY SMALLER but ALSO DOES NOT SEEM TO HAVE THE SAME RESOLUTION, DETAILNESS, SHARPNESS (or whatever you may call it)... What am I  doing wrong? WHICH SETTINGS DO I HAVE TO MAKE IN ORDER TO KEEP THE SAME IMAGE-QUALITY (or even to enhance it) IN STORING ON THE COMPUTER ?!     Thanks, RVH

    Don't triple post, and especially not in the wrong form.

  • Split long video into small 15 second clips

    Hi, I have a long video (7 minutes) I would like to upload to Instagram. Since they only takes 15 second clip, I would like to split my video into small clips. How can do it easily with iMovie?
    Thanks,
    fireman

    First, you may not need to spit the event clips at all. You can select short bits of the long event clip and drag it into your project as you wish.
    Having said that, there are good reasons to split event clips. For example, the 75 minute movie may contain many logical events that you wish to split out by date. In this case, iMovie 11 can do it, but I would not recommend it. It is a slow process and is prone to error.
    I would recomment that you use a free app called MPEG Streamclip from Squared Five (google it).
    To use MPEG Streamclip, drag your long clip into MPEG Streamclip.
    Then, move the cursor to the "in" point of the clip, and press i. Move the cursor to the "Out" point of the clip, and press o. Then, FILE/EXPORT TO QUICKTIME (or FILE/EXPORT TO DV if it is DV). Then repeat until you have done this for all clips you want.
    If you know the date and or time of the footage, name your file
    clip-yyyy-mm-dd hh;mm;ss
    (let mpeg streamclip provide the extension). This will provide metadata that iMovie will use to put the event in the right year and month.
    When finished splitting your long clip, import into iMovie by using FILE/IMPORT...MOVIE

  • Exported video is missing the last 8 mins

    Well this is odd. I just spent the last 8 hours waiting for my sequence to export. So I have a 38-min sequence, 1080p exported to MPEG format to match sequence settings. The problem is when it's finally done, the video is only 30 mins long, so it's missing the last 8 mins. When I was monitoring the export status, it was moving along during the last 8 mins of the sequence so I'm not sure where it went wrong. The drive I saved it to has plenty of free space, and I also suspected maybe my default player (Windows Media) has a limit on videos, but I've exported other files before that were an hour long. Any thoughts? :/

    Yeah I made sure "Entire Sequence" was selected and the work area bar was at the end. Where do I check to see if there's been an Out Point set for the Timeline?
    At this point I am starting to suspect it has something to do with limits on my Media Player. This is the first time I've exported a file of this specific format (1080p Movie Clip on Windows Media Player) at this size. I tried it a second time (both times with Media Encoder) with all the same settings and the same thing happened: The export bar was showing progress thru the whole sequence but final file still is cut off at exactly 30:04 which leaves it at 3.99GB. I wonder if  there's a file size cap or something. I'm gonna give it a third go with H.264 Blu-ray instead of MPEG (so it'll be an MP4 instead of a Movie Clip) and see if I have any better luck, unless some of you have more suggestions   I didn't check the estimated file size before but now it's telling me 5.5GB :/

Maybe you are looking for