Exporting vm / template in OVF/OVA format.

How do i export an img file & cfg file to an OVA bundle. Can export the current vm but they are stored as independent .cfg and img files under Templates/
Objective is to import the vm into another virtual machine instance (which is the ODAv2 virtualized box).
I can use the individual vm.cfg & System.img file to spin up an instance, but i cannot import it as a template (as no single OVA or OVF archive is created) / Note : ODA has no OVM Manager. It uses "extended" oakcli commands to import/export templates only.

Hello.
There is JeOS as VM template.
You should check it out.
http://www.oracle.com/technetwork/server-storage/vm/downloads/vm-jeos-083859.html

Similar Messages

  • HT3705 Has anyone any ideas why a Pages file v09 exported from v5 bloats from around 212kb to 5.9mb? I had to export existing template files back from the latest version to v09 due to limited features in latest version.

    Recently updated Pages because of Mavericks update, quickly discovered how limited new version is, exported altered files back to Pages 09 format and re-opened using earlier Pages. In amending to re-save as templates again noticed a 212kb file has bloated to 5.9mb.
    Has anyone any ideas or experience as it will not take long to fill up a 1TB drive at this rate! - I had left behind PC's and MS Office and was reasobaly happy using Pages for business, but it looks like Office for Mac is now going to b eneeded.

    Yes, I opened them all with 5 then re-saved as v5 templates. Then realised other problems with v5 so exported them all back v09 as xxx.pages files. Used some with v09 and noticed they had all increased.
    I just checked again and noticed that the initial v5 saved templates had typically increased from 412kb to 1.1MB (they do have 4 graphics) - then after exporting the templates are 5.9MB in v09 an dthe files are still 412kb.
    I had a similar problem many years ago using RTF files with Word and they kept bloating everytime you edited and saved due to saved or linked graphics?

  • Pages 2.0 is exporting Word files in name.docx format causing duplicates files on my PC via iTunes.  Anyway to have it export name.doc files as Pages did earler?

    Pages 2.0 is exporting Word files in name.docx format causing duplicates files on my PC via iTunes.  Anyway to have it export name.doc files as Pages did earler?

    What I read in the PDF version of the manual (while I was waiting for my plane this afternoon), it seems pretty comprehensive. I was particularly interested in what it had to say about creating your own templates.
    Supposedly, it will remember if I left invisibles showing in templates (one of my big complaints with Pages 1). I'll find out soon enough. I must say that opening my two documents I use for answering posts here in discussions sure did open faster & navigating an 11-page table was much faster.
    Another good thing I noticed, the font used for the serial number is much clearer & there were no confusing characters - O/0, S/5, etc.
    Peggy

  • How Can I Export Our WIki in a CSV Format?

    Victims of our own success: what was originally created as internal content on our private OS X Server wiki now is being requested for presentation on an externally hosted web service. Management wants this content to be accessible to constituents on the outside in a searchable database on a completely different service not administered by us on the inside.
    The developer building the database has asked for this content to be exported in CSV for easy import into the new database: page title, tags (a.k.a. keywords, not to be confused with HTML formatting tags), and page content.
    Sadly, according to the Wiki Server Admin Guide (p. 73), the Wiki service does not appear to store page content in any kind of database, but rather in separate files. Thus I can't see a way to provide the requested data short of copying and pasting content from each individual wiki page on the OS X Server.
    Considering that we're talking about ~200 pages of content, I'd like to avoid a manual process of that kind. I've been through the official Wiki Server Admin Guide, but it offered no help for exporting content in the way I need.
    I'm fairly comfortable with AppleScript, less so with shell/bash scripting. Since I'm trying to save time, I'm not sure that's my answer on this scale. Debugging a script (for me) might take longer than a simple copy/paste of 200 items (maybe I'm wrong).
    Does anyone have a different way of looking at this I haven't thought of? Am I missing something?
    Thanks in advance,
    Axiom

    Unfortunately, exporting the wiki data into a format that databases can understand is not a trivial process. Pages are stored as a collection of folders that contain the wiki text, the HTML for display, the change history, the comments, and the attachments.
    In a default setup, the page folders are under /Library/Collaboration/Groups/{groupname}/wiki . All folders under Groups can only be viewed by using root access permissions.
    For example, for a wiki page accessed by:
    http://yourserver.com/groups/general/wiki/abc12/mywikipage.html
    Under /Library/Collaboration/Groups/general/wiki
    abc12.page - folder for wiki page
    !- attachments - folder for attachments
    !- images - folder for images
    ! page.html - html (probably a cache) for display
    ! page.plist - property list file with all notes on the
    ! revisions.db - SQLite database file that contains all the revisions.
    You would need a script that runs as the _teamserver user to read every .page directory, parse the .plist files, and generate a SQL statement to preserve all the text, markup, and quotations. If you program really well, you could search for the URLs in every .plist file and record the embedded attachments and images, and copy them to another location.
    For my first project, I parsed the .plist files just to get a map of the random page URL and the title. I also found out about "deleted" and "tombstoned" states, and elected to ignore those.
    If I get a moment I'll write about that next.

  • How to export table contents in xml file format through SQL queries

    hi,
    i need to export the table data in to xml file format. i got it through the GUI what they given.
    i'm using Oracle 10g XE.
    but i need to send the table name from Java programs. so, how to call the export commands from programming languages through. is there any sql commands to export the table contents in xml format.
    and one more problem is i created each transaction in two tables. for example if we have a transaction 'sales' , that will be saved in db as
    sales1 table and sales2 table. here i maintained and ID field in sales1 as PK. and id as FK in sales2.
    i get the combined data with this query,
    select * from sales1 s1, sales2 s2 where s1.id=s2.id order by s1.id;
    it given all the records, but i'm getting two ID fields (one from each table). how to avoid this. here i dont know how many fields will be there in each table. that will be known at runtime only.
    the static information is sales1 have one ID field with PK and sales2 will have one ID filed with FK.
    i need ur valuable suggestions.
    regards
    pavan.

    You can use DBMS_XMLGEN.getXML('your Query') for generating data in tables to XML format and you can use DBMS_XMLGEN.SETROWSETTAG to change the parent element name other wise it will give rowset as well as DBMS_XMLGEN.SETROWTAG for row name.
    Check this otherwise XMLELEMENT and XMLFOREST function are also there to convert data in XML format.

  • Help needed  while exporting crystal reports to HTML file format using java

    Help needed  while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
    html file of the report
    thanks

    the ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
    Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM

  • Exporting report as PDF and CSV formats same time with out executing DB query twice

    Post Author: cpriyanka
    CA Forum: Exporting
    I am using Crystal Report 9.0 version and Java.
    I am getting "PrintOutputController" from "ReportClientDocument"
    And then by calling export(ReportExportFormat.PDF) generating PDF format report.
    Now I need to generate both PDF and CSV format files same time. How can it be done?
    My understanding is when we call "export" it does the DB query execution and other functionality.
    In that case, if I call "export" two times with two different formats, then DB query will be executed twice and that takes lot of time.
    To avoid, is there a way I can all some API so DB query executed once, but I can export report in to multiple formats?
    I appreciate your help.
    Thanks.

    Post Author: cjmorris1201
    CA Forum: Exporting
    Hello,
    Are you using the "pull" or "push" method for your crystal reports?  If you are using the "pull" method (the report itself executes the sql) then I believe there is no way around having the query execute twice since it is fired off each time you open and export the report.
    If you use the "push" method, however, then you can just create the recordset/dataset and then set the datasouce once for the report.
    Here's a broad overview of push and pull though the Crystal Report Viewer is used.  The viewer may or may not be applicable in your case:
    http://aspalliance.com/265_Crystal_Report_for_Visual_Studio_NET#Page5
    Regards, Carl

  • How do I export FCP movie to a WMV format (Windows Media Player friendly)?

    I am puzzled. How can I export FCP movie to a WMV format or Windows Media Player friendly?
    Thanks in advance.

    You need a third party app to do this... AVI is the only format that you can export from FCP that's windows media friendly... WMF's can be exported with flip4mac... http://www.flip4mac.com Probably the best of the apps...
    Jerry

  • Can I export Numbers data into a calendar format?

    I have project names and their deadlines in a table and would like to export/view them in a calendar format so I can see, at a glance, what is due when...does anyone know if this is possible?

    Thanks.
    Can I import Excel data into a PDF form using Acrobat XI on Mac?
    created by GKaiseril <https://forums.adobe.com/people/GKaiseril>  in PDF
    Forms - View the full discussion
    <https://forums.adobe.com/message/7053927#7053927>
    User Interface.
    If the reply above answers your question, please take a moment to mark this
    answer as correct by visiting:
    https://forums.adobe.com/message/7053927#7053927 and clicking ŒCorrect¹
    below the answer Replies to this message go to everyone subscribed to this
    thread, not directly to the person who posted the message. To post a reply,
    either reply to this email or visit the message page:
    Please note that the Adobe
    Forums do not accept email attachments. If you want to embed an image in
    your message please visit the thread in the forum and click the camera icon:
    https://forums.adobe.com/message/7053927#7053927 To unsubscribe from this
    thread, please visit the message page at
    , click "Following" at the
    top right, & "Stop Following" Start a new discussion in PDF Forms by email
    <mailto:[email protected]com
    or at Adobe Community
    <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=
    14&container=4698>  For more information about maintaining your forum email
    notifications please go to https://forums.adobe.com/thread/1516624.

  • Hyperlink error : on Exporting crystal report to Editable RTF format

    Hi , In my crystal report I have hyperlink which works normally. Now when I export this report to Editable RTF format; the hyperlink gives error "Error! Hyperlink reference not valid. "
    It works for other formats.
    Please help

    This issue was patched for Crystal Reports XI R1
    Hot Fix Name: commonXIwin_chf.zip
    Adapt Number-ADAPT00408450
    Description:
    When exporting a report with email hyperlink to editable RTF format,
    the links do not work.
    New Behavior:
    This is now resolved.
    Here is a link to the hotfix:
    ftp://ftp1.businessobjects.com/outgoing/CHF/commonXIwin_chf.zip
    If you are using XI R2 and are still encountering this, then please check that you have installed the latest service pack (SP3) - and if the issue still occurs, then this may need to be tracked as a bug again.  However my understanding is that this was fixed for R2
    a programmer learning programming from perl is like a chemisty student learning the definition of "exothermic" with dynamite

  • How to 'Export' a Template cloned from a VM in Oracle VM 3.1.1

    I've used the OVM Manager to clone a stopped VM into a Template. I can see the Template in the Manager GUI and use it to create new VMs on the same or other servers within the same OVM Manager space.
    Now, I'd like to take this newly created Template and import it into other OVM Managers at another location for creation of VMs on servers there.
    Is there a way 'export' the template files (System.img and vm.cfg, etc.) for copying an import into other OVM Manager spaces?
    Thanks.

    The previous post by 911182 was helpful - thanks, but not quite accurate (at least not in my case).
    The post led me directly into the Repository where I found only the vm.cfg file under the Templates directory
    /OVS/Repositories/<Repos_UUID>/Templates/<template_UUID>/vm.cfg
    Within the vm.cfg file however, I found that the location of the disk file for the template to be at:
    /OVS/Repositories/<Repos_UUID>/VirtualDisks/<disk_UUID>.img
    So copying just the Template directory will not get all files for the template, you'd need to copy the disk files
    from the VirtualDisk directory as well.
    Is going into the Repository and finding all the files for the Template the only way to achieve this?
    Is there really no export feature in the Oracle VM Manager to gather up all the files of the template and tgz them
    up for you?

  • Why Acrobat x professional is changing the text formatting specifically the font family  and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exact

    Why Acrobat x professional is changing the text formatting specifically the font family  and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exactly same word file on exporting it from its pdf counterpart?

    I was testing the preciseness & efficiency of Adobe acrobat x professional's doc conversion capabilities. As i have to take a document editing project in future which is going to need lot of pdf to word and vice versa conversions . What I did was I created a test word document converted into a pdf using a pdf maker in my word 2007 , Acrobat did convert the document from word to pdf keeping everything in the source file intact , However when i tried the other way round and attempted to convert the same pdf to word 2007 file format I lost my formatting ?So the font that I used to create the pdf are the ones taken from word 2007 which i believe is using the fonts that are installed in my computer. Any suggestions on how to preserve the formatting of the document after converting it from pdf to word file format?
    Regards
    Mike

  • TS4163 Every time I try to export my movie into a Windows Format from compressor it shrinks the movie to 27 seconds.WHY? HELP

    Every time I try to export my movie into a Windows Format from compressor it shrinks the movie to 27 seconds.WHY? HELP

    Probably because you have the free version of Flip4MAc from Telestream that limits exported files to 30 seconds or so. There ae several paid versions  – depending on your requirements
    Good luck.
    Russ

  • Premiere and Media Encoder will will no longer export my edit to any file format.

    This is on a Windows 8.1 PC.
    The edit exported fine until I made one big mistake.
    I created a Nested Edit to make a quick alteration.
    Since then the following is now the case and I cannot go back to an earlier edit to fix this.
    Premiere and Media Encoder will will no longer export my edit to any file format. Using either the Export Option or Media Encoder.  Get a dialog that says "Unknown Error Compiling Movie"
    There is nothing wrong with my footage.  This edit worked fine and I export through Media Encoder many times until I made a Nested Edit within the Premiere Project.
    I have tried all sorts of searches on the net for a fix to this but nothing seems to be current or indeed works.
    Any help would be appreciated as this is a show stopper.

    Thanks for the reply Mark, appreciated.
    I have found a work around but it still leaves a long term issue for Adobe to fix.
    As to your first solution:
    1).  The nested edit is already in its own timeline panel.  It will not export or encode via media encoder.  This is the problem.
    2).  I will try the KEM roll feature but I have a work around see following.
    3).  No I do not have a nested edit within a nested edit.
    I did a lot of research on the net on this issue as it happened to a colleague of mine on his machine about two weeks ago.  It took me six hours to get a fix and in his case there were six video clip that had read errors.  When I overwrote those clips from the original backup master it fixed the problem.  However I was never able to use Media Encoder again to export his project without it failing.  I could only use the Export feature.  Again he had used a nested edit in his project.
    I my case I do not have any nested edits within a nested edit.  All I did was drag my main edit onto the New Sequence icon at the bottom of the Project Bin.  This of course created a nested edit in a new Timeline Panel which is what I wanted.  I then slid the entire nested edit to the right in the timeline by two seconds as all a wanted to do was add two seconds of black at the head of the edit.  That was it.  From that point of creating the nested edit Media Encoder and the Export option failed every time with the fore mentioned error.
    The final work around was one of those I found previous mention of during my research.  I created a new clean Premiere Pro CC 2014 project, I then used the import option under the file menu.  I imported only the original main edit which brought in that edit along with all the required footage.  This would then export to disk using the Export feature.  However, Media Encoder will still not encode this new edit, it fails the same way every time, 'Unknown Error Compiling Movie'.
    As a test I loaded the old corrupt edit project back up and deleted the nested edit sequence completely and re-saved it.  This had no effect and did not fix the problem.  This particular project file will no longer export directly or via media encoder at all no matter what I do.
    This seems pretty serious to me.  I worked on this edit for a whole month without issue, encoding out roughs as a went without any issue, it was only yesterday after I made the nested edit that the project file is now useless as it will not encode out at all.  Yes I have a work around and was able to salvage my project and get it rendered in time for my deadline but the fact I have a partially working Project that Media Encoder will not touch does not instill me with confidence for long term use of Premiere Pro if this is going to happen again.
    Is there some place I can send this project file to Adobe to see if they can find out what is wrong with it?  I am not the only person having this issue I have seen other post going all the way back through CS6 it seems.

  • Export  WebDynpro context node  to CSV format?

    I have successfully implemented exporting the context node to xml format then open through the Excel following the tutorial : Exporting Context Data into Excel Using the Web Dynpro Binary Cache.
    But now, I need to implement another version that export to CSV format, then open through Excel.
    I remembered I read a blog and some forum posts that mentioned about this solution, but I just could not locate where they are now through SDN search now.
    I will appreciate if someone can point me to those links again.
    Thanks.
    Kent

    Hi Kent,
    I am also developing the application wherein Table data needs to be exported to Excel.
    I am trying to download the WDExcelExport.zip from the foll. link
    https://wwwn.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/bad3e990-0201-0010-3985-fa0936d901b4 [original link is broken]
    But I am getting the error
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    The exception was logged. Inform your system administrator..
    See the details for the exception ID in the log file
    Can you please send me the Sample Application WDExcelExport.zip. My mail id is  [email protected]
    Regards
    Nikhil Bansal

Maybe you are looking for