Exporting with colors used in initial preview

Hi, I often notice that the fast initial preview has a desirable set of colors, however when it renders high-quality preview, the colors become desaturated. My question is -- how can I export the photograph using the set of colors used in initial preview, but not in the high-quality preview?
Note, I'm working with RAW files, Nikon D300, using "Vivid" setting for saturation and "High" for Active D-lighting.

You can't. What you see is the jpeg the camera created as a preview to your raw file. Lightroom only shows that for a short time after which it replaces it with its own interpretation of the RAW. Lightroom, like any non-Nikon raw converter cannot read the hints like vivid on how to render the raw data. If you want the image as rendered by the camera, open your RAW in Capture NX (should have come with your D300) and export as a jpeg or tiff from there. You can also extract the jpeg from the RAW file using tools such as exiftool, but that is a pain.
>Note, I'm working with RAW files, Nikon D300, using "Vivid" setting for saturation and "High" for Active D-lighting.
Just to be clear, if you shoot RAW and open your RAW files in a third-party converter, none of these settings get used.

Similar Messages

Make Export With Previous track Export With Preset

If I do an Export, then do an Export With Previous, the Export With Previous uses my settings from my export, as I expect. But if I do an Export With Preset, then do an Export With Previous, the export uses my settings from my last Export (however long ago that was) rather than my Export With Previous from moments ago.
I'd like to see Export With Previous respect Export With Preset selections.

I still see this behavior with LR3b2/OS X.. just accidently used an old one time export setting from a few days back [and couldn't find where the file would up at first as a result] because I wasn't expecting "Export With Previous" not to have pciked up that I used "Export With Preset..." from the File menu 2 minutes earlier.. so a little bump

I want to export with alpha channel using a codec that carries less data than gopro cineform

Hi--I want to export some intermediate files with an alpha channel. i'm using gopro cineform, and these files end up being so large, meaning that i have to sit through hour long renders. is there a a codec i can use that has an alpha chanel but creates a smaller file size?
thanks

Thanks for your help Patrick. I tell ya, I can't believe what's going on. As I said, this project until today has not caused me any issues what-so-ever. The other six sessions are totally fine. I also created a quick project with the same settings added text - then exported using the same settings I've used before, and it exports with the proper alpha channel.
Yet, I rebooted the Mac, made sure to delete old versions in the trash can and everything. Still, no alpha.
To keep moving forward, I literally had to use a color key in FCP to cut out the background color.
Crazy!

IPhoto unable to export EXIF information correctly for photos with color filters

I have imported photos from my phone to iPhoto and noticed that some of the photos do not have EXIF information when exporting to other places or synced back to iPhone.When I am trying to view the photo in iPhoto, the date is correctly shown.
The date shown in the iPhone photo moment tab is the import date rather than the original date when the photos were taken.
When I am trying toview the photo in iPhoto, the date is correctly shown.
(for example: the photo was taken in Dec 1, 2012, imported to iPhoto in Nov 1, 2014, and synced back to iPhone.
the date shown in iPhone is Nov 1, 2014, the date shown in iPhoto is Dec 1, 2012.)
After further looking into the details of the photo, i have noticed that theses photos are taken with color filters in iPhone or bursting photos or panoramas.
(e.g a mono or fade filter choosed when taking photo in iPhone camera).
When choose " reveal in finder" option in iPhoto for these photos, there are two options : view original or modified.
the original files contain EXIF information and the modified files do not.
the original files show photo without color filter
the modified files shows photo with color filter, the modified photos are what the photos were contained in iPhone originally.
When exported syncing these photos, the modified files was exported/synced, however, no EXIF information was exported. photos only contains the creation date.
These resulted in a mess in the photo collection in my phone. photos were displayed in wrong order.
When i export these photo to another location for back up purposes, i choose "include all location information, name, keyword", only the modified photos were exported without any EXIF information.
The only way I found is reveal these photos in finder.
iPhoto seems unable to export/sync photos that are taken with color filters/ panorama photos/ bursting photos.
is there any way to solve this problem? Thank you!

i have just taken a photo with effects and imported to iPhoto, The EXIF can be exported. The problem is syncing.
I think this problem only happen to photo taken before iOS 8.
EXIF of photo with effects unable be synced back to iPhone.
Apple acknowledged that the new Photos.app in iOS 8 is handling edits differently, see:
iPhoto and Aperture don't have edits to photos you import from iOS 8 devices
In iOS 8 edited versions are stored in a different way from previously. And it looks like there is now a bug, that prevents the older edited versions from being handled correctly.
Send a bug report to Apple. You could use the feedback form, if you do not have a developer account: http://www.apple.com/feedback/iphoto.html

How to export table data with coloring of cell according to value.

Hi all,
I am using jdeveloper 11.1.1.6
i want to export table data with lot of formatting. like with coloring of cell according to value and so many.How to do that?

Hi,
like with coloring of cell according to value and so many.How to do that?
Answer is, you can't
Frank

Exporting images unmatched color schemes on different previews

Hello, After I've exported through LR 3 I am getting different tone qualities only with two different image viewing windows. The picture attached shows the example of the image on the left opened with Windows Photo Viewer is brighter red tie and bluer suit while the one on the right is opened with Microsoft Photo Editor is more darker red and purple suit. The one on the left is the correct image.
This is also happening when the photo is sent through an inventory management system we have.
I am exporting with 600 x 1200 jpeg resize 72 dpi at sRGB, 100 quality, and jPeg mode in File settings.
Help. This is frustrating and it seems to be doing it at random with the images

Microsoft Photo Editor seems to be discontinued and I assume it is/was not color managed.
if a program is not color managed it displays colors in an unreliable manner.
Windows Photo Viewer on the other hand is color managed, provided that you use Win 7, that your monitor is calibrated, and that the correct profile is being applied (in Control Panel >Hardware and Sound >Display >Adjust Resolution >Advanced Settings >Color Management >Color Management. It should display your latest calibration profile as being used.
If your monitor is not calibrated color display will be unreliable in any program. If you don't have the calibration tools (Hardware called a spectrometer + accompanying software) you can set your monitor to sRGB. For photo editing this is only a temporary solution.
See here on how to set your monitor to sRGB:
http://forums.adobe.com/message/4977176#4977176
and here
http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1137/188/how-do-i- change-my-monitor-profile-to-check-whether-its-corrupted

I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.

I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
Additionally I have no idea what you are saying here
I have found the color palettes but can't seem to incorporate them into my backgrounds palette.
And it always helps for you to dientify the version of iPhoto that you are using
LN

I just upgraded iMac to 10.6.8 and now saved items open with "Color-Sync Utility". How can I change it back to preview?

I just upgraded to 10.6.8 and my saved files open with "Color-Sync Utility". How can I change it back to Preview?

Select a document in the Finder, choose Get Info from the File menu, click on Open With, select the desired application, and press the Change All button.
(80944)

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Videos in iPhoto used to export with correct date, no they don't.

Hello, I use iPhoto a lot. About every 6 months I rename and export my photos and videos to a separate portable hard drive for safe storage.
I am doing that right now, but have noticed that my videos do not export with the correct date (changes the date to the export date), and therefore the videos are not going to be in the right order, and will not have the correct date on my backup files. The pictures export properly with correct date. Just the videos are the problem.
This problem did not exist before. What has changed? Is there a way to export my videos and retain the correct date again?
Thank you!

Thank you for the quick reply Terence!
Is this something new for Maverick, or new iPhoto update? I have always been able to export video with the correct date. Even when I imported it back into iPhoto later, the correct date was there. I think I updated to Maverick after my last renaming and exporting session.
I have found that if I drag the video from iPhoto to my desktop, it keeps the correct date on the file and the video is intact. So there must be some sort of "metadata" in the file that has the correct date?? You probably have the knowledge to experiment with this??
Just seems weird, because for years it was just fine. Now it is not.
How did the videos used to keep the correct date?
Thank you.

Illustrator CS5 Javascript export with Use Artboards?

Hi
Is there any way to code the export of png files with the Use Artboards option in Javascripting?
Thanks
J

Hi,
Have you try this (no tested on CS5), and i didn't test the result, if there are objects outer artboard.
art.chrome

I'm trying to learn how to use Xcode. I've create a simple Hide App app from a youtube video tut, but I can't get it to export with the icon I've chosen. Any clues why?

I'm trying to learn how to use Xcode. I've create a simple Hide App app from a youtube video tut, but I can't get it to export with the icon I've chosen. Any clues why?

We didn't do that video. Why are you asking here?
Those videos are usually outdated....
Use the current tools etc., in the iOS Dev Center and iTunes/iTunes U ~ Stanford.

HP Envy 110e printer (D411a) will not install with me using Windows 8 Consumer Preview. I need help

Just pick up the new HP Envy D411a printer, i set up with my wi-fi and all was going well until i put the disk in my PC . Just to find out that my NEW printer will not work with the Windows 8 Consumer Preview . I need help with this or until UP update the new printer to work with Windows 8, which will be on the market soon. Can some one please HELP ME

Available now is print and scan capability that HP worked with Microsoft to include into Windows 8.
The Printer Install Wizard can provide you additional information:
http://h30434.www3.hp.com/t5/Windows-8-Consumer-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-...
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)

ALV with colored cell exporting to Excel

Hi all,
I have an ALV-Table in my webdynpro appliation. There are some dropdownbykey fields in the alv and some cells are colored.
After export to excel the colored cells are no more colored.
Is there a possibility to export the color too.
Best regards
Marcus

Have you found a solution to this issue? I am searching for the same.

Help with working with color and profiles

Like many others, I suspect, I am having trouble managing the colors on my iMac to match the prints I get. I have a few questions, but first, some background:
1. Screen calibrated with Huey Pantone. Calibration was done with monitor brightness all the way to lowest. I don't use Shades or anything else. I have my Display Profile set to this profile. I'd be happy to post my .icc profile if I knew how. I can email it to anyone who can help here.
2. I have been sending my prints to Costco with the option of turning OFF their Auto Correct. To try to get things to match, I downloaded Costco's printer profiles from http://www.drycreekphoto.com/icc/Profiles/Minnesota_profiles.htm#MN (Eden Prairie, Glossy and Lustre paper profiles).
3. I shoot photos with a Canon XTi with color space set to sRGB. I am using iPhoto 08.
So here are my questions:
1. I loaded the Costco printer profile icc files into /Library/ColorSync/Profiles/Displays. When I open ColorSync, I see them under Profiles/Displays. However, in ColorSync/Devices/Displays/iMac, when I go to change the profile, I navigate to these files but the computer just beeps and won't take them. I thought all icc files could be used by monitors and printers - can these Costco iccs only be used for printers (I noticed the Costco files are 4MB, the other display iccs are 4KB)?
2. How does iPhoto handle color spaces? I import my photos off my CF card. Under iPhoto / Prefs / Advanced, I have both Copy Items and Embed ColorSync Profiles checked. Which color profile is it embedding? The one from the camera (some generic sRGB) or the one my display is using (the Huey)?
3. As a test, I exported my photo as a full size TIFF (a 3.3MB jpeg became a 28MB tiff). I opened the TIFF in Preview. Preview / Tools / Assign Profile came up as "Camera RGB Profile" (so I think this answers question 2 but I'm not sure). While in Preview, if I now change the Display Profile (from Huey to Adobe RGB), the whole screen changes, including the photo I'm looking at in Preview - shouldn't Preview hold the photo the same since it's using a different color profile?
4. I set the Display Profile back to Huey. In Preview, I go back to my photo and under Tools / Assign Profile I assign the profile my Huey profile (instead of Camera RGB). I save this as a jpeg and reimport into iPhoto. When I compare these two photos side by side in iPhoto, they look indistinguishable. Why, if on the original import iPhoto embedded the Camera RGB profile into the photo and I make a copy assigning the Huey profile do they look identical? There's no reason to assume that the Camera RGB and Huey profiles are the same! Or is it some trick where the Display Profile is overriding everything?
5. Lastly, I reopened the original TIFF export in Preview and assigned it the Costco profile (happened to use the glossy one). Lo and behold, what appears on the screen is a much closer version to what I got back as a print. Finally, as one last tweak, I changed my Display Profile from Huey to Adobe RGB and the picture I saw in Preview was closer still to what I got back from Costco. I changed the Display back to Huey, kept the Costco profile assigned and saved my TIFF back to a JPEG. I imported into iPhoto and compared - it looks much closer to my Costco print.
So I'm utterly confused. How do professionals manage their color workflow? Is my Huey calibration whacky? Why, if I assign a color profile to something in Preview, does it really depend on what Display Profile I have set (I thought profiles managed color, but it looks like it's relative).
I apologize for the rather long post, and very much appreciate any help and suggestions here!
Thanks!

The contractual requirements between the vendor and your company may be the key. The contract may or may not discuss whether the vendor's permission to modify the material includes an obligation to make the documents usable. "Usable" may be construed to mean providing original files. If the vendor is required to provide originals, they may or may not be required to provide them in a common format, like MS Word, rather than the proprietary FrameMaker format they use. Their providing a PDF may completely satisfy their obligation; your lawyers may be helpful here.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
bmr0330 wrote:
I did ask them for the source file but they haven't been forthcoming with that. I may look into the evaluation copy of FM anyway but considering the price ($868 USD through our catalogue supplier) I doubt I would be able to get a licensed copy once the evaluation runs out. I do appreciate the suggestion though. Thank you. Brian

Exporting with colors used in initial preview

Similar Messages

Maybe you are looking for