Exporting Work from one SID (Systems Identification) to another

Hi, Inititially I was working on a particular SID, where I have built a project on Project Builder. A week ago, my SID was changed and now I have to work on the new SID (access to my older SID is still available).
Through this message, I would like to know, whether I can export or transfer the project that I have created in the older SID to the new SID. If yes, would you please tell me how.
Thanks
Abdullah

I just got back from a three week trip to Yellowstone and used my MacBook Pro and Aperture to process over 3000 images while on the road. Got home, got on my home network, exported the Yellowstone project from my laptop to a drive on my G5, shutdown Aperture on the laptop (can't run two copies of Aperture at the same time), fired up Aperture on the G5 and imported the processed project into my main library. Slick! Can't even come close to doing that in LR (yet). Saved me a ton of time in getting a lot of the editing done during down time on the road and the integration into the existing library was very straight-forward. Quick final edit, select some of the better images, smart web gallery and a very quick web output. One of the easiest trip outputs I have had in years.

Similar Messages

  • Error when exporting IDOC from one XI system to another

    Hi all,
    When I do an export for an IDOC from my one XI server to be able to import it into another I get the error below. The funny thing is that it works perfectly for my COND_A idoc but not at all for DEBMAS and MATMAS idoc.
    Any ideas?
    <b>Error during export. Internal error during pvc call: SAP DBTech JDBC: Result set is positioned after last row.</b>
    Regards,
    Liesel

    Hey,
    I guess you are using MAXDB,
    please read note number 1055246
    (Inconsistent XI content caused by bug in MAX DB)
    Good luck!

  • Data transfer from one crm system (Prod) to another crm system ( quality)

    Hi,
      I have a requirement in which i have to transfer a set of data ( BP, Product, Sales Order etc) for a given date range from production system to Quality system. I am more concerned abt the Business documents which move from CRM to ERP.
    I thought of moving those outbond bdocs which are generated in crm system for the passing the data into ERP from Prod to Qty sytem and  try to reprocess them as an inbound bdocs in Qty through some program. But i came to know that bdocs will not contain the full data of the business documents which gets created in CRM system. So if i reprocess those bdocs also i will not get the full data of those businesss documents.
    Any other alternative is there ?
    Regards,
    M Khan

    Hi,
    In the all the data transfer between SAP systems RFC is the best option.
    Just create a source system for the new BW system and it will work.
    Thanks
    Message was edited by:
            Ajeet Singh

  • Tool to transfer data from one CRM system to another

    Hi,
    We are merging one CRM system into another and need to transfer master data and transactions from one CRM system into the another. What are the options/tools that are available for data migration in CRM 7.0?
    Please share experiences/thoughts if you have moved data into SAP CRM from legacy/other SAP CRM systems.
    Regards
    Dan

    Hi Dan,
    Looking at your post - I decipher that you would be doing download from a lower version of SAP CRM system to SAP CRM 7 if this is the scenario then you have an advantage as you could employ standard SAP CRM middleware which is a powerful application to download master data from older version to new version, or else you could ALE the master data. Now this being the simple part we move on to the harder part of the migration which is transactional data - namely elements such as Number ranges, document flow, relationships, condition data tables .....etc if you are migrating this from lower SAP CRM version here you would have to understand the interlinking with R/3 or ECC6 in any case you would have to do a fresh implementations but on the whole there are some way outs for examples ; But still  let me know how you intend to migrate and what are systems we are talking about.
    With compliments,
    Tarovar.

  • Data transfer from one BW system to another

    As there are, at least theoretically, a myriad of ways to push data from one BW system to another, I was wondering if anyone had some key thoughts or experiences to share. I see that OpenHub/InfoSpoke and the Data Mart Interface / Export DataSources seem to be the main methods of choice.
    What are the differences, and what are the key points to consider between these two or other recommended ways (for BW3.5)?
    Thanks in advance,
    Thomas

    Hi,
    In the all the data transfer between SAP systems RFC is the best option.
    Just create a source system for the new BW system and it will work.
    Thanks
    Message was edited by:
            Ajeet Singh

  • I can only hear sound from one side of the head phone

    I've plug in my bass guitar through a cord and a converter in the line in port on my PC. Then checked 'listen to this device' (head phone) which is connected properly as it worked perfectly when I play any sound in ma PC. But when I play my guitar, I can
    only hear it from one side of the head phone. How to fix it!?

    Is that compatible to give output from both sides (R + L) ? Can you check same thing on other system ? 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • How to export photos from one iPad to another

    How to export  photos from one iPad to another

    Sending the photos over WiFi might be the easiest way for you to accomplish this. The Wireless Transfer App should work. You will both have to download the app on your own devices. Read about it here.
    http://www.wirelesstransferapp.com/

  • Need of XI to send an XML from one SAP system to another SAP system

    Dear colleagues,
    I work in the SRM solution.
    In SRM there is a Purchaser and Supplier scenario called Supplier Self Services.
    The Purchaser creates a Purchase order and sends it to the supplier in form of an XML file.
    The purchaser system and supplier system are the same SAP system but different clients.
    Example: Purchaser client is 300 and Supplier client is 330 and both of them are on the same system.
    I have a very basic question.
    Currently we have the XI system which acts as an interface to send the Purchaser PO XML to the Supplier as XML.
    a)My question is in case the XML structure is identical across both the clients, then what is the need of XI system?
    b) Is it not possible to send XML from one client to another without an XI system? there si no need of any message mapping required since I am expecting the same XML structure in both clients.
    Please clarify the need of XI system in the following scenario. Is it not possible without XI?
    Many thanks.
    Best regards,
    Srivatsa

    Hi Srivatsa,
        YOu can send the XML message from one sap system to another sap system even without an XI system in between.
    But the use of SAP XI (Or any other middleware) is recommended because, it gives you the following advantages.
    1) Better monitoring and alerting mechanism. XI provides you robust set of tools that let you monitor the status of the messages that are exchanged.
    2) Direct communication between systems is referred to as Point to Point communication, which has its own disadvantages as against Hub and SPoke model (Message exchange using XI).
    3) Message delivery is guaranteed if you have XI in between.
    If the target system is down, the sender sap system will not try multiple times to post the message.
    But if you use XI, it can be configured to send the message multiple times, till it succeeds.
    Regards,
    Ravi Kanth Talagana

  • Lightning cable not working from both sides (not reversible)

    Hi,
    2 days ago I started to notice something... I was about to charge my iphone with the cable but I noticed that it wanst charging... I checked the usb ports from my computer and 2 wall adapters and sometimes it did charge and some did not, but then I fliped the lightning cable it did, what I mean is that if I plug the charging cable in the "right side" it does charge and gets recognized by iTunes, if i plug it with the "wrong side" it doesnt.
    At this moment I dont know if the cable is the problem or the phone, because I only own one lightning cable. I`ll try to go to a apple store to check with another cables, but still i want to know if there is more people with this problem and if it has some kindo of solution.
    my phone is 1 month old btw...
    Saludos y disculpen mi ingles

    I have the same problem with my iPhone 5. It started last week when I found out that the phone is not charging when connected. So I take out the cable and found out that the pins on the connector cable was black and have a burnt smell. I leave the phone for several minutes and tried to connect it again. I found out that cable only work on one side.
    So I took some pictures and went to Apple online support to request for a new cable. I got a new cable and the problem still persists. Now I know that the problem is with the connector on the phone. I went to the Apple online support and request for a repair. I sent them the phone and they said that they put the repair on hold.
    I telephoned the support centre asking why they put the work on hold, and they told me that the repair is not covered because the problem might be caused by liquid damage. I was pretty sure that it wasn't liquid damage because I believe I take extra good care of the £529 phone. The operator asked me to ask my insurance company (which I don't have) in case they cover that accident. The operator also told me that the repair cost, £152+VAT is cheaper than usual £170++VAT. It was very disappointing.
    Pretty sure it wasn't liquid damage, I telephoned the support centre again, and this time the operator told me that it is because of accident and they don't cover it. She couldn't explain exactly what is the problem and connected me with a senior operator. The senior operator told me that the engineers think that it might be cause by liquid damage. Then I told her that I have pictures of the burnt cable. She let me send those pictures and they'll contact me again by tomorrow. So I still don't know what is the conditon of my claim.
    So as a conclusion... The engineers think that the damage might be caused by liquid damage, but the term 'might' does mean that it 'might not' caused by liquid damage too. I have read other discussions telling that they found out that their cable has some corrosion on the pins even though there have not been any contact with liquid.
    https://discussions.apple.com/thread/4363224?start=0&tstart=0
    https://discussions.apple.com/thread/4566785?start=0&tstart=0
    It looks like that I'm not the only one with the problem. I think the lightning connector itself is prone to corrosion. So I think that it is a design flaw, and Apple should cover the repair cost. Now I can only wait.

  • Migrate PY and TM cluster data from One SAP System to another

    Hi Experts,
    Could you please suggest me some options to migrate PY and TM cluster data from One SAP System to another? My requirement is to move all the cluster data (Active and Inactive ees).
    I see that PU12 is an option. Anybody used that to migrate between SAP systems. Please provide some details
    Points guaranteed
    I see that using PU12 you can export only PCL2 Clutsers. Are there any ways to move the other clusters like PCL4 ?

    Hi,
    As far as data transfer, If have all normal configuration settings in your targeted system you can use LSMW (Use T.code AS91 in LSMW for recording)  to transfer your data in your both cases.
    Hope it resolves your both the issues.
    Regards,
    Murali

  • Sending mail from one Sap system to another

    Hi all,
    plz explain me how can i send mail from one SAP system to other SAP system.
    Thanks in advance
    Venkat

    Hai Venkat
    Go through the following Code
    DATA: OBJPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
      DATA: OBJHEAD   LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
      DATA: OBJBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
      DATA: OBJTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
      DATA: RECLIST   LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
      DATA: DOC_CHNG  LIKE SODOCCHGI1.
      DATA: TAB_LINES LIKE SY-TABIX.
      DATA L_NUM(3).
    Creation of the document to be sent
    File Name
      DOC_CHNG-OBJ_NAME = 'SENDFILE'.
    Mail Subject
      DOC_CHNG-OBJ_DESCR = 'Delivered Mail'.
    Mail Contents
      OBJTXT = 'Object text'.
      APPEND OBJTXT.
      DESCRIBE TABLE OBJTXT LINES TAB_LINES.
      READ TABLE OBJTXT INDEX TAB_LINES.
      DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
    Creation of the entry for the compressed document
      CLEAR OBJPACK-TRANSF_BIN.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM = 0.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM = TAB_LINES.
      OBJPACK-DOC_TYPE = 'RAW'.
      APPEND OBJPACK.
    Creation of the document attachment
      LOOP AT ITAB_DATA.
        CONCATENATE ITAB_DATA-PRODUCTOR
                    ITAB_DATA-VBELN
                    ITAB_DATA-POSNR
                    ITAB_DATA-MATNR INTO OBJBIN.
        APPEND OBJBIN.
      ENDLOOP.
      DESCRIBE TABLE OBJBIN LINES TAB_LINES.
      OBJHEAD = 'ORDERS'.
      APPEND OBJHEAD.
    Creation of the entry for the compressed attachment
      OBJPACK-TRANSF_BIN = 'X'.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM   = 1.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM   = TAB_LINES.
      OBJPACK-DOC_TYPE   = 'TXT'.
      OBJPACK-OBJ_NAME   = 'WEBSITE'.
      OBJPACK-OBJ_DESCR  = 'ORDERS.TXT'.
      OBJPACK-DOC_SIZE   = TAB_LINES * 255.
      APPEND OBJPACK.
    Completing the recipient list
    target recipent
      clear RECLIST.
      RECLIST-RECEIVER = '[email protected]'.
      RECLIST-EXPRESS  = 'X'.
      RECLIST-REC_TYPE = 'U'.
      APPEND RECLIST.
    copy recipents
      clear RECLIST.
      RECLIST-RECEIVER = '[email protected]'.
      RECLIST-EXPRESS  = 'X'.
      RECLIST-REC_TYPE = 'U'.
      RECLIST-COPY     = 'X'.
      APPEND RECLIST.
    Sending the document
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           EXPORTING
                DOCUMENT_DATA              = DOC_CHNG
           TABLES
                PACKING_LIST               = OBJPACK
                OBJECT_HEADER              = OBJHEAD
                CONTENTS_BIN               = OBJBIN
                CONTENTS_TXT               = OBJTXT
                RECEIVERS                  = RECLIST
           EXCEPTIONS
                TOO_MANY_RECEIVERS         = 1
                DOCUMENT_NOT_SENT          = 2
                OPERATION_NO_AUTHORIZATION = 4
                OTHERS                     = 99.
    Thanks & regards
    Sreenivasulu P

  • Transferring Development from One SAP system to another?

    I was wondering if it was possible to transfer an entire Package or a Transport with its development contents from one SAP system to another?
    It would be preferred if the method doesn't require connectivity, like for example to be able to export everything in a package to an XML-file that could be imported into an empty package on another system.
    It would need to handle all development parts, such as Reports, Function Modules, Classes, Special Classes (such as Exception Classes), Shared Objects and Persistent Objects (Yes, I like objects ), Unit Tests, Data Dictionary definitions for tables, table types, structures, data elements and so forth.
    It this in any way possible?

    Hi
    I believe u can only create a request containing all abap object of the package: u can do it by SE80.
    After releasing the request u need to pick up the data file and the cofile and past these files to the target system.
    So u can add and then import the your request in the queue of the development of the target system by trx STMS.
    Probably u need to ask a little help to your basis in order to copy and past the files from and to SAP server (I don't know if you've the authorizations).
    The name of datafile is like D<request number>.<system id>
    and the path
    /usr/sap/trans/<SYSTEM ID>/data
    the cofile name is K<request number>.<system id>
    and the path
    /usr/sap/trans/<SYSTEM ID>/cofile
    Max

  • Copy Transferrules from one source system to another

    Hi everybody,
    we're uploading data from nearly 25 sourcesystems (including separate systems and systems with more than one client to extract from) via flat-file. The source-system exports data to a shared file directory and the bw-system reads it from there. Though this results in only <b>one</b> transferrule for all source-systems, it keeps generating problems every time upload is due.
    Somebody had the idea to switch to 'standard' R/3->BW method of data staging, using generic extractors and so on. But this will result in <b>25</b> transferrules which, I'm afraid, have to be set up and maintained seperately. As there's quite some coding in the rules (the transfertructure in fact has 241 fields), flaws are for sure!
    We know the trick of exporting a transferrule, changing the source-system-mapping and re-importing the same transport-request. That can be used to copy to one or two other systems, but not for 25.
    Does anybody know another way to copy a transferrule from one source system to multiple other source systems?
    Looking forward to your answers
    Thanks and Regards
    Robert

    Hi Ralph,
    I don't like that methode. Importing the same transport 15 times, each time changing the source-system mapping and making sure, that source-system gets the changes seems to be a huge source of errors, which will be hard to find.
    What do you think of the following idea to solve the issue a totally different way:
    All transfer-rules directly connected to the source-systems are stripped of all Coding, so there is a plain 1 by 1 transformation including 0logsys.
    The InfoSources attached all lead to one ODS-Object, which has the only purpose to collect the data from the source-system without any transformation. So some fields a filled by a system and other fields maybe not.
    The coding specific for source-systems is moved to transfer- / update-rules from that ODS-Object to the original ODS-Objects / Cubes and the "collecting" ODS-Object is emptied after every loading process.
    This will result in a single point of change. It will be quite a huge program (maybe in startroutine) but it's the one and only point, where changes and corrections have to be made.
    Regards
    Robert

  • How To send DMS(Documents cv01,cv03n,cv04n) from one sap system to othersap

    Hello Experts,
    I am working Document management system(CV01,cv02n,cv03n,cv04n)...
    I want to send the documents from one SAP system to Other SAP system
    Using ALE/Idocs....
    Please Help on this any sample programs....or function module....
    Thanks
    Preethi

    Hello,
    Please refer to the thread:
    How To send DMS(Documents cv01,cv03n,cv04n) from one sap system to othersap
    Best Regards, Murugesh AS

  • How to run select query from one SID to fetch record from another SID?

    I have two SID, one is AAA and another is BBB and the connection name is A1 and B1 respectively. I want to run one select query from A1 connection to fetch record B1. Can anyone help me how I can connect from one SID to another SID?

    Hi 869357,
    You can also use the copy command. (Works with limited types)
    try:
    help copyRegards,
    Turloch

Maybe you are looking for