Exporting XDCAM from Premiere CC2014 to SxS Card

Hi There,
I am Running Adobe Premiere CC 2014 with My Sony PMW-500
Occasionally I need to master my edit to an SXS card.
I export an MXF OP1a from the time line with the settings relevant to my camera.
I then open Content browser and select the SxS card.
I then Select import and then select the newly created MXF stream.
All this writes perfectly but unfortunately it creates a ‘XDCAM ROOT’ file system which my PMW 500 can’t read.
Ive looked in all the preferences of content browser but can’t see anything that will give me anything different.
Do i need to firmware update my PMW 500 so it can read XDCAM ROOT folders?
Any help would be appreciated.
Kind Regards,
Verdy

Hmm- wouldn't it make much more sense to get a proper video I/O device for your Mac and send finished projects out direct from FCP X that way? Basically you're using your camera for that now and losing a ton of time & quality for not much gain. Check out the T-Tap from AJA: does precisely what you most likely need and is super cheap:
http://www.aja.com/en/products/t-tap/#overview

Similar Messages

How do I export photos from iphoto to a memory card?

How do I export photos from iphoto to a memory card?

Not using the correct structure. Camera's use a very exact structure and the only way the camera will see photos on the card is for them to be in that exact structure
LN

4:3 Export Query from Premiere Cs4

Hi there.
Im looking for some advice on best export setting from premiere please.
Basically I am making some visuals for a 12x9 screen and the visuals have to fit exactly onto the screen as there is a certian degree of mapping going on. I am editing using the project settings DV PAL 48khz
I'm wondering is it better to export as
720x576 (D1/DV pal 1.0940)
or
768x576 (square pixels 1.0)
I am a bit confused as to which will fit exactly to a 12x9 screen
I will be playing the visuals Directly from my laptop via Vga cable.
Any advice is welcome thanks!

Sorry I dont understand. Do you mean the resolution of my source media?
It is all of varying sizes and resolutions but I am editing in a 720 x 576 sequence.All of the footage is being scaled up or down (depending on the size) to fit exactly (hopefully) the 12x9 screen
I Have put in a 4:3 guide frame in the preview window to lay clips on. This leaves a small black border at either side as a I am not editing in a 4:3 sequence I suppose.

How to I export pictures from iphoto to a sd card

how do I export pictures from iphoto to a sd card?

léonie wrote:
Exporting from iPhoto to the SD card is preferable. Dragging to the card will only write the lower quality preview files and not the high resolution originals.
Export to a folder on the Desktop and then drag the folder to the card. If the file system on the SD Card is not MacOS Extended (Joournaled), you'll avoid a problem with the limit of files, that can be stored on the top level of the card by collecting all files in a folder.
Actually I found the opposite was true.
As you can see in the following picture, the dragged photo, which is the one named IMG_2268.JPG retained more metadata and had a larger file size than the one I exported which was reduced in file size, and lost a bit of the meta data in the export. Including the creation date, and the latitude and longitude.
I think Dragging is the better option.

Exporting Quicktimes from Premiere Pro

When exporting video from Premiere pro, uncompressed or HD 1080i Quicktime settings crash my machine every time , any idea why? I'm trying to find the best export to give to a colleague working remotely on a mac using aftereffects

<moved from Adobe Creative Cloud to Premiere Pro>

Cannot export media from Premiere Pro CS4

I am unable to export media from premiere pro cs4. The process I go through is as follows
select files/sequence I want to export
select file menu
scroll down to export
select media
nothing happens, premiere pro "freezes", as though it was going to open up adobe media encoder but does nothing, premiere pro can be "unfrozen" simply by pressing esc.
I have tried doing all of this with media encoder open and still nothing happens. if anyone has any suggestions please throw them my way. thanks.
j

Then read the following link carefully and follow all included links as well. Specifically answer all questions in the first link and depending on whether the earlier info helped at all, continue to the second link and provide the details requested in that second link:
Some suggestions

Is 1080psf export possible from Premiere or AME?

I'm exporting individual clips of EX-1 XDcam from a sequence, one clip at a time so I can also apply some level correction to the export. It is 23.967 psf at origin from the camera. I am exporting to ProRes HQ 23.967 1080p as reported by Premiere Pro 5.5.1. The time line is AJA 23.98 1080psf. The problem is that the exports are turning out to be true 1080p, not psf as the original. I'm using the clips in another program that does not create a 1080p timeline, Media 100 Suite 2.1 (latest version, came with the AJA 1080 LHi OEM board I'm using). Bottom line, is there a way to get Premiere or AME to export a true 1080psf ProRes file? Psf is preferred in many applications. I don't see any mode select for psf, even though I am in a 1080psf timeline.

The project is already started in Media 100 Suite 2.1. It must have been a long time since you've used Media 100. Other than the fact that it won't playback until media is converted to ProRes, I prefer the simple, quick interface to any other. But the biggest reason is stability on the Mac. Media 100 Suite 2.1 is solid as a rock. I have a new Mac Pro with GTX 285 NVidia Card 24 Gb RAM, fast RAID, and I still find unexpected crashes in 5.5.1. That and the fact that 5.5.1 broke Nikon D7000 support, the main reason I wanted to get into Premiere in the first place. There is a lot of D7000 footage in this project, so I am going back and forth between 5.0.4 (which supports it) and 5.5.1 (which doesn't). But these things are not why I posted. Just wanted to find out why Premiere is taking 1080psf footage from my EX-1 on a 1080psf AJA timeline and exporting it as 1080p. It is giving me problems that I wouldn't have if it stayed in psf. Is there any way to over-ride this behavior and get 23.98 psf out? I see settings in interpret footage. Saw an article in Pro Video Coalition that extolled the fact that it automatically interprets psf as p in 5.5.1. Does this mean I should be doing my exports in 5.0.4 to get more control over interpretation, or is there an interpretation setting I can change in 5.5.1?
Don't get me wrong, I really enjoy using Premiere, I love the fact that you don't have to convert to get playback of my EX-1 footage, even though my D7000 doesn't work presently. I intend to use it for all of my titling and color correction. Maybe I'll give the next project when I am not under a lot of time pressure to Premiere. Hopefully they fix Nikon support before I have to pay a third time for 6.0. Media 100 will take the 1080p on the timeline, it just won't playback in the source window on my external monitors when the project setting is psf, and all timelines at 23.98 1080 are psf. I really don't want to edit a 30 minute documentary without source window playback.
Thanks in advance for any help with this.

How to export photos from aperature to an sd card

I am trying to export photos from Aperature 3 to an SDHC card to transfer to Ipad 2

i have the same problem. I would like to export the photos from SD to Ipad1. I use the reader but i don't know in which way to call the folder that contain the photos.

Problem when exporting audio from Premiere Pro v4.2.1 into wave 5.1 format

Hello to Adobe experts!
After installing of last updates for Adobe Premiere Pro (v4.2.1) and for Media Encoder (v4.2.0.006) the was a problem:
Now I cannot to export audio from adobe sequence into uncompressed wave format with 5.1 channels settings. Source m2ts video files in sequence are with 5.1 audio.
What I doing:
1) in Premiere I execute "File\Export\Media"
2) Export settings are:
- format: Windows Waveform
- audio codec: Ucompressed
- basic audio settings: 44100Hz, Channels: 5.1, Sample Type 16bit
3) After OK button it opens Adobe Media Encoder.
4) After pressing Start Queue in Adobe Media Encoder there is a message "Error compiling movie. Unknown error"
In earlier versions it worked fine.
Can you help me with this problem?
Alexander

Here are the options, from a sequence with 5.1 master track:
and with Surcode:
Notice that first one does only give stereo as an option. Nothing more. With Surcode it gives you 5.1 sound.

When exporting video from Premiere Pro?

When exporting a video from Premiere Pro it makes a .m4v file instead of .mp4, even though it saids in the Premiere Pro that it will make a mp4 file - and I can't use them afterwards. It has been there after I have updated last time.

Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

Question: Exporting .aaf from Premiere Pro CC v8

I want to export an aaf from Premiere to be color corrected in Davinci Resolve. My export fails because some of the clips in my timeline have effects (horizontal flip, gaussian blur, volume). I get a pop-up saying "Translation Issue". What am I doing wrong?

I mean a .aaf file. I've read that it is compatible with Davinci Resolve, and I can round trip my sequence from Premiere to Resolve using .aaf. I've tried exporting it a Final Cut Pro xml as well. Both times almost immediately the export stops and a warning pops up listing all of the issues:
Translation issue:
Sequence <Feature_Color> at 00:02:38:07, video track 7: Effect <Horizontal Flip> on Clip <JT_20131128_INTSmallMnt03.MOV> not translated.
Translation issue:
Sequence <Feature_Color> at 00:08:57:04, video track 6: Effect <Track Matte Key> on Clip <DG_06_06_2014_Radio_CU_06.MOV> not translated.
Translation issue:
Sequence <Feature_9> at 00:00:00:00, audio track 8: Effect <Internal Channel Volume Stereo> on Clip <ATF soundtrack_2.aif> not translated.

Export m4v from Premiere CS5 on mac

Hi,
I am trying to output a .m4v (one single file that has video and audio together) from Premiere Pro CS5 on mac.
Settings I have tired are:
h.264
h.264-bluray
Apple TV
The file will be used on iphone and ipad devices; however, Premiere can only output the file in two tracks (audio and video seperately).
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++
Method I also tried is:
Export my video to .mov
Open .mov at Quick Time Pro
Use Quick Time Pro Save As - Apple TV format.
However, it only provide as large as 960x480 size.
I need a Setting to control my video dimension as well.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++
Anyone can help?
-thanks ahead,
sl

MP4 is the correct container for a file that contains video and audio, yes.
I should clarify that the use of "MP4" vs "M4V" is nearly only a semantics issue. I only brought it up to clarify your question. You could just as easily substitute something nonsensical, like "ZZZ" and it wouldn't change the content of the file, though it might cause some applications trouble recognizing the file.
> why is it that I can use Quicktime Pro (Save As > Apple TV format) to render my .mov to .m4v that contain the audio?
See my comment above about semantics for the real reason. However, the QuickTime application plays fast and loose with a lot of rules. I would never hold it up as an example of what other video applications should or shouldn't do.
Here are Apple's specification pages for iPad, iPad 2, and some models of iPhones. You can see here that H.264 video is accepted in M4V, MP4, and MOV containers.
http://support.apple.com/kb/SP580
http://support.apple.com/kb/SP622
http://support.apple.com/kb/SP643
http://support.apple.com/kb/SP587
http://support.apple.com/kb/SP565

Export curves from Premiere

Hello, is there a way to export a time-remap curve from Premiere as a chan file / curve or a Ascii curve?
Merci

Hello,
I want to export that curve to use is in another software.
I want to see if this is a possibilty.
THanks

Cannot export HD from Premiere Pro CS5.5 XDCAM HD 420 projects

Most of the sources material is XDCAM HD 420 35 MPS. There are a few MOV clips in there as backgrounds and some, not many Boris Red 5 transitions. No matter what I try, I cannot export to Bluray. I cannot make a bluray via dynamic link. I was able to export NTSC AVI files of each of the five modules, rebooting the computer after each of the 5 exports and not rendering the effects in the timeline. Used the AVIs to make the FLV and WMV clips. However, I still need to make a Bluray in order to get paid.
Is there such a thing as a corrupt project? This project started its life as CS5 but it started endlessly indexing renders (I mentioned that before a few months ago but with CS5.5) so I brought it into CS5.5. If I render the effects in the work areas it starts the indexing renders circle dance so I don't bother, jsut exported to AVI.
I've removed ALL unused media and ensured that every one of the 5,000 files is in the single directory on an AVID SCSI Ultra320 RAID.
I cannot export via Project Manager, it just quits.
Any ideas are welcomed.
I am running this on a Supermicro MOB with two quad XEONs, 32 gig RAM, nVidia QuadroFX 3800 and two channel Ultra320 SCSI. Win7 64 bit Ultimate. I tried swapping the Quadro for a GTX 570 but nothing improved.
thanks,
Peter Burn

"Why not?"
If I knew that I would be very happy indeed. I am reinstalling CS5 to see if it will export this project. I bought the newest version of Diskeeper and defragged all the SCSI and SATA drives, still no joy. Exports get to about 25% then Adobe freezes up completely. I may have to put the AJA Kona back in then try exporting via HDSI to a rented deck.

Can't import audio or export video from Premiere Pro

because nobody can solve the problem if I call by phone are busy, if chatting not know resolve, if I send email no answer, this version of Premier is the worst of all, since they did Membership is pure waste time with your program ... I work my projects and then when I want to export do not leave me, if re start the pc asks me to put my membership, then we are not the files and when put to find them and not be imported or imported without audio ... because if they are good for cobar each month's installment, do not fix this problem because it makes me lose time and dinero..y the strangest part is that everyone with the pirate Premier not have this problem.
Message was edited by: Kevin Monahan
Reason: I realize you're frustrated, but try to create a title that is more descriptive of your problem next time. Thanks!

import from SD Card ...insert the SD slot on the PC.....
I put them on an external drive as protection and another file in the pc and except the two projects, when Premiere me not recognize the files try to bring them to the external disk, some occasions works, another only brings the video without audio and most of the occasions not recognize any file, so it's double work and perdidad time, and technicians Premiere in an occasion made a partition the hard disk of the PC for it to work, but only work well for a few days, as the machine will re start the same thing happens again ... now the premier technical atman only to tell me that specialized agents atenderan me, but it never happened, because I hang chat .... and tel is the same .. .but when charging if they are very punctual, I pay them for service suite.asi that they no longer do and made the comment pirates users because it's true ... they do not struggle with their cracks, I am Premier User pirate ever paying for more than 10 years ago, but since started membership, this has been an ongoing problem.

Exporting XDCAM from Premiere CC2014 to SxS Card

Similar Messages

Maybe you are looking for