ExportPDF in a business

How does it work with licencing for ExportPDF in a business? can we just create 1 account and let all 150 users use it or do we need more accounts/licences?
greetings,
Stefan

Hi Thestefanzwa,
You would require separate subscription for each user.
Regards,
Florence

Similar Messages

Business use of Adobe ExportPDF or Adobe PDF Pack

Hello,
i just have one Question, which licence do i need to use the "PDF Export" or the "Adobe PDF Pack" from Adobe Reader 11 in my Business.
Is there any kind of a "Special" Licence?
For your Information, we have Terminal Server Environment with shared Applikation.
best regards
Hermann Dilger

Not sure if there is any other than the standard license; see https://www.acrobat.com/
[topic moved to PDF Pack forum]

How should I make sense of ExportPDF data?

I'm using Adobe Livecycle GeneratePDFService and calling the ExportPDF method. I'm sending the method a system generated PDF and looking to retrieve the data in a way that I can progammatically parse out specific pieces of information and use them in a C# WCF Service. I can successfully hit the Adobe service and return various formats. So far I've analyzed the HTML32 and XML10 formats. Unfortunately, I can't make much sense of the data because there doesn't seem to be many indicators of placement on the page or within tables / line items. Here is an example of a challenge that I'm looking to overcome.
Here is an image from the income section of an IRS Form 1040.
The ExportPDF exports the below as format HTML32. As you can see there is no way to relate a row of the table with any of the dollar values. XML10 isn't much better.
Income Attach Form(s) W-2 here. Also attach Forms W-2G and 1099-R if tax was withheld. If you did not get a W-2, see instructions. 7 Wages, salaries, tips, etc. Attach Form(s) W-2 . . . . . . . . . . . . 7 8a Taxable interest. Attach Schedule B if required . . . . . . . . . . . . 8a b Tax-exempt interest. Do not include on line 8a . . . 8b 9 a Ordinary dividends. Attach Schedule B if required . . . . . . . . . . . 9a b Qualified dividends . . . . . . . . . . . 9b 10 Taxable refunds, credits, or offsets of state and local income taxes . . . . . . 10 11 Alimony received . . . . . . . . . . . . . . . . . . . . . 11 12 Business income or (loss). Attach Schedule C or C-EZ . . . . . . . . . . 12 13 Capital gain or (loss). Attach Schedule D if required. If not required, check here ▶ 13 14 Other gains or (losses). Attach Form 4797 . . . . . . . . . . . . . . 14 15 a IRA distributions . 15a b Taxable amount . . . 15b 16 a Pensions and annuities 16a b Taxable amount . . . 16b 17 Rental real estate, royalties, partnerships, S corporations, trusts, etc. Attach Schedule E 17 18 Farm income or (loss). Attach Schedule F . . . . . . . . . . . . . . 18 19 Unemployment compensation . . . . . . . . . . . . . . . . . 19 20 a Social security benefits 20a b Taxable amount . . . 20b 21 Other income. List type and amount 21 22 Combine the amounts in the far right column for lines 7 through 21. This is your total income ▶ 22 Adjusted Gross Income 23 Educator expenses . . . . . . . . . . 23 24 Certain business expenses of reservists, performing artists, and fee-basis government officials. Attach Form 2106 or 2106-EZ 24 25 Health savings account deduction. Attach Form 8889 . 25 26 Moving expenses. Attach Form 3903 . . . . . . 26 27 Deductible part of self-employment tax. Attach Schedule SE . 27 28 Self-employed SEP, SIMPLE, and qualified plans . . 28 29 Self-employed health insurance deduction . . . . 29 30 Penalty on early withdrawal of savings . . . . . . 30 31a Alimony paid b Recipient’s SSN ▶ 31a 32 IRA deduction . . . . . . . . . . . . . 32 33 Student loan interest deduction . . . . . . . . 33 34 Tuition and fees. Attach Form 8917 . . . . . . . 34 35 Domestic production activities deduction. Attach Form 8903 35 36 Add lines 23 through 35 . . . . . . . . . . . . . . . . . . . 36 37 Subtract line 36 from line 22. This is your adjusted gross income . . . . . ▶ 37 35,000. 35,000. 35,000. </Figure>
Is there a format which will output the PDF in a format that is progammatically parsable?

Following up to myself here - I was able to get Camera Raw to convert an image such that the L*a*b* numbers matched DNGPE, but Hue and Sat are still off. What I WAS doing previously, to no avail, was converting in Camera Raw using the same BASE profile I had selected in DNGPE. I thought that since I hadn't made any corrections or changes in DNGPE, it would only be applying the base profile, and the images should match.
To fix that, I used DNGPE to export a new profile (again, with no actual edits made), and converted using the exported profile. Now Photoshop and DNGPE agree about the L*a*b* figures at least, though they still disagree about hue / sat. DNGPE consistently reports hue numbers about 6º-10º higher than Photoshop, and saturation numbers that are 50-100% higher. Saturation difference, I suspect, are from comparing HSB in Photoshop to HSL in DNGPE. Not sure what would be causing the hue inaccuracy. The RGB numbers differ wildly, too, so this is probably a color management issue.
Duplicating DNGPE's color management to obtain identical Hue and Sat figures in another application is now the problem. Put as simply as possible - "Where does DNGPE get it's hue / sat figures?"
Message was edited by: dougboutwell

I have been on hold on your chat service and phone line forever - cancel my auto renewal immediately - adobe exportPDF. I mean immediately.

Your marketing strategies are unconscionable.
I have been trying to cancel my Adobe ExportPDF "auto renewal" (pfft) for an hour now and can't reach anyone. I am a busy man, and this time is costing me money.
I want it cancelled now.

Hi leej97822608,
I'm sorry that you had difficulty getting through to Customer Care--we certainly don't want that experience for our customers. I've checked your account, and it looks like you've already canceled.
Please let us know if there's anything else we can do for you.
Best,
Sara

Question on ExportPDF

To whom it may concern,
I have a business which receives a lot of PDF files incoming everyday and I'm wondering if ExportPDF can scan some of the key information in the documents.
However before I purchase your software, can I send you a sample of the PDF and see the results of the outcome? (in excel)
Also, could you kindly let me know if there's any accuracy issues? Since its for business use we would need the information translated to be as accurate as possible to eliminate checking manually.
Please kindly reply asap.
Thanks,
Brian

Good day Brian,
Give the service a try. Visit http://exportpdf.acrobat.com/signin.html and log in with your Adobe ID credentials. We offer a 1 file trial conversion.
Please let us know if you have any questions.
Kind regards,
David
Acrobat Community Manager
Adobe Systems

I gave an invalid date of birth and was marked ineligible to use my ExportPDF subscription

Your prompts require a date of birth....WHY??? You have my CC info - you don't need any more PII.
I answered with an invalid date (today's date) and it marked me as ineligible to use the ExportPDF service which I just purchased.
This is stupid!!! How long is it going to take to get this fixed? I need an exported spreadsheet now.

How about you provide a field for a stated age, not something used frequently in establishing identities (and falsifying identities) ?
I am 62, old enough to know that no one needs to know my date of birth other than government authorities and financial institutions with which I do business. All others should only want to know an “approximate age”….I’m certainly not younger than 18.
Don’t contribute to the $32 billion earned annually by hackers and identity thieves.
Thank you,
Wally Talen, CISSP, Security+, OCPDBA, OCAPL/SQL, SCJ2P, SCPDP, CPA
Direct: 805-501-6919
Description: Description: CISSP_logo.jpg Description: Description: Security+_CE.jpg Description: Description: OCPJPG Description: Description: java_cert_prog_cmyk.jpg

ExportPDF doesn't convert scanned words correctly

https://cloud.acrobat.com/#exportpdf doesn't convert scanned words into words in Word. It used to. Nobody seems to be addressing this.

Hi Sara,
I'm only using the website, which I've used before with scanned documents with fuzzier letters.
I don't see how the text in the print-screen image sent to ExportPDF could be any clearer, and yet I get no text results at all. In the past, I could get quite a mess of characters and symbols from the OCR's attempt (example an h being translated as ln). I'm definitely rethinking my software choice.
It's interesting. The document I looked at in the forum for turning off OCR doesn't seem applicable to the current ExportPDF screens. (I looked there to see if something was maybe set up wrong in my connection.) That made me wonder, too, if the OCR software had changed.
Diane Schuler
Financial Systems Analyst, Finance Business Intelligence | Ministry Health Care
222 W College Ave Suite 3B | Appleton, WI 54911 |*: (920) 628-9334 | :(920) 628-9105 | *: [email protected]

How can I cancel my ExportPDF subscription?

Adobe Acrobatを購入しており、ExportPDFは不要だった。長期使用しておらず、至急解約したい。
WEBで解約のリンクをクリックしても、ヘルプデスクに相談するリンクのみで、解約手続きのリンクが見当たらないが
オンラインで解約はできないのか?

Dear Sara,
Immediately after "Important Customer Security Alert" sent by Adobe (2013/10/04),
I requested credit card company to terminate the Credit Card that I registered at that moment.
So that today I received the following e-mail request;
>Action required: Your Adobe ExportPDF 年額 subscription has lapsed
>      Dear 正仲西,
>      Your Adobe ExportPDF 年額 subscription is set up for automatic payment. However, we were unable to bill the credit card on file for your subscription fee.
>      Please check the payment settings for your account. You may need to update your credit card or payment information.
>      Updating your payment information now will help avoid any interruptions to your Adobe ExportPDF 年額 subscription.
>      Update now ›
>      Thank you for your business,
>The Adobe ExportPDF 年額 Team
Now I updated Credit Card information to the valid one.
I guess this is the reason for "billing currently processing".
After update, I was able to turn off automatic update for Adobe ExportPDF subscription online.
After billinghas been completed, please check the subscription was successfully cancelled
at your earliest convenience.
Thank you in advance,
Tadashi

Was double charged for ExportPDF. How to remove?

Hey, I probably requested ExportPDF twice by mistake. I was double charged. Two separate reference numbers. How do I get one removed? I suppose during regular business hours Tues August 28. Or can I enter request online? Where?
Many thanks,
DJS

You can plea your case here:
http://www.apple.com/emea/support/itunes/contact.html

Paid Adobe Reader XI ExportPDF Subscription - "Error Occurred While Signing In"

Like others in this forum, I have a paid subscription to Adobe Reader XI, and when I try to convert a .pdf to Word or any applicaiton, I receive the message "an error occurred while signin in".
This facility previously worked with no issues. It is unacceptable that Adobe offers no help for these issues, and paid customers are locked out of processes which are at times critical to their business.
There must be an answer to this somewhat ridiculous situation.

Hi codybrix,
We're sorry to hear you're having trouble. Could you try opening Adobe Reader XI and choosing Edit > Preferences (Windows) or Adobe Reader > Preferences (Mac), then select 'Adobe Online Services' from the left-hand side. Click 'Sign Out...', then sign back in with your Adobe ID and password.
Once this is complete, try accessing ExportPDF from the Tools pane again.
Please let us know how it goes.
Thanks,
David

Use one account or multiple for 10 domain users of Office 2013 Home & Business

I have 10 seats of the retail version of Office Home & Business 2013 for use in a domain environment. Windows 7 Pro 64, Server 2008R2 environment. No exchange. Blank slate.
Should I install all with the same account for ease of management, or setup a new MS Live account for each user? Can I do either, and what are the advantages to each?
Thank you.

Hi,
Both are ok, but neither is really good.
In your scenario, I suggest you use Office 365 to manage all these, which is more recommended:
http://office.microsoft.com/en-001/business/compare-office-365-for-business-plans-FX102918419.aspx
http://office.microsoft.com/en-001/business/compare-all-office-365-for-business-plans-FX104051403.aspx
Regards,
Melon Chen
TechNet Community Support

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

Problem in Creation of business partner

i create business partner with the help of BAPI_ISUPARTNER_CREATE_FROM_DATA
i want to add mobile number but there is no any field such like mobile number in address data table.
But there is separate table of telephone data. When i use this table to store the mobile or telephone number at that time bapi stores the data on the telephone table in independent communication but not in direct communication fields .
Please , suggest me what i do to store the data in direct communication instead of indirect communication.
Thanks for review my post...

Hi ilesh,
There are 2 kinds of communication data -
1. Address dependent- this is linked to the address, and would need to be created / changed using BUPA_ADDRESS_CHANGE. You need to pass the BP number and the address number to which you want to link the tel / mobile number.
2. Address independent - this is directly linked to the BP, without dependency on the BP's address. You can modify such data using BUPA_CENTRAL_CHANGE.
Now, you can decide which fields you want filled, and accordingly use the correct FM. Second point - how to make sure the number gets created as a mobile, and not normal telephone. There is a field called R3 user in the table ADR2, and also in the Telephone structures that you fill while calling the FMs mentioned before. Make sure you pass the correct value of R3 user ( i think it is 2 for mobile, but you can check it by looking at the value range for this element in ADR2 through transaction SE11).By default, R3 user is 1, which denotes landline telephone. To create mobile numbers, pass R3 user = 2 (or whatever value you look up from the value range).
This should solve your problem.
Cheers,
Rishu.

Logical Systems in Business Services

Hi
In Business Service creation, for Adapter Specific Identifiers, the parameter for the Logical System. It is only possible to assign one logical system to one Business Service ?.
i.e. to do
MyBusServ1, Z_LS_1
MyBusServ2, Z_LS_1
is not possible ?
When trying to assign Z_LS_1 to MyBusServ2 I get the error that Z_LS_1 is already assigned. Is there a way to circumvent ?, I do not want to create two logical systems in R/3 as the IDOCS types submitted by the Business Services are the same.
Thanks
Damien

Thanks for the replies
Sarvesh - The Business service is the sender of the information \ IDOC. If I remove the Adapter specific config then how will XI know what Logical system to apply to the IDOC ?.
Jaishankar - I am creating two IDOC's in SAP. MATMAS and PORDCR. The input file are coming from two different source systems. lets say sys1 and sys2. Both of thse for clarity are created in my scenario as Business Services. sys 1 creates MATMAS and PORDCR IDOC's int he syatem, sys2 creates PORDCR IDOC's in the system. As sys1 and sys2 are related in that they created the IDOC's as part od the same project then I would like to collect in the same partner profile in SAP e.g. Partner Profile ZPP_IDOC with IDOC types MATMAS PORDCR that serve as input for both systems. Logically I would assume that I can assing the logical system ZPP_IDOC to both the adapter specific parameter in both sys1 and sys2.
Thanks
Damien

Impressão de Cheques - Padrão Brasileiro - SAP Business One v. 8.8

Olá Experts!
O Layout de impressão de cheques default do SAP Business One 8.8 que está pré configurado no PLD imprime cheques nos padrões brasileiros? Ou tenho que customizar o PLD para imprimir os cheques?
Muito obrigado,
Ricardo Vieira

Resolvi o problema alterando o PLD dos cheques.

ExportPDF in a business

Similar Messages

Maybe you are looking for