Exports too much time
When I export a song to mp3, it gives me extra time at the end that i don't want. I have the end slider positioned where i want it but when I export to mp3, the 1:40ish song turns into a 2:30min song.
Do you have the cycle region enabled or regions selected? Check the timeline, if there is a selected region at 2:30 minutes.
From the GarageBand Help:
The entire project, from the beginning to the end of the last region, is exported as an audio file. Any silence at the beginning or end of the project is trimmed. If Cycle mode is on when you share the project, the part of the project between the start and end of the cycle area is exported.
Similar Messages
-
During the Unicode conversion , Cluster table export taken too much time ap
Dear All
during the Unicode conversion , Cluster table export taken too much time approximately 24 hours of 6 tables , could you please advise , how can we reduse the time
thanks
JainnedraHello,
Use latest R3load from market place.
also refer note
Note 1019362 - Very long run times during SPUMG scans
Regards,
Nitin Salunkhe -
The queries takes too much time
Hi,
I want to compare time of queries between Spatial and PostGIS, but Spatial take too much time. I created spatial indexes in both databases so I have no idea where can be the problem :-(. I'm actually student and I try this for my essay, but I start with Oracle by myself so I'll appreciate some help.
I have table with cca 7000 polygons and I want to create new table like dissolve these polygons by attribute katuze.
Query in Spatial takes 8506 s :
CREATE TABLE dp_diss_p AS
SELECT KATUZE_KOD, SDO_AGGR_UNION(
MDSYS.SDOAGGRTYPE(a.geom, 0.005))GEOM
FROM dp_plochy a GROUP BY a.KATUZE_KOD;
Query in PostGIS takes 10.149 s :
CREATE TABLE plochy_diss AS
SELECT st_union(geom) AS geom
FROM plochy
GROUP BY katuze_kod;
I really don't know what to do, please give somebody me some advice :-(. Please excuse my English.
Thx EvaI tryed use the sdo_aggr_set_union like this:
CREATE OR REPLACE FUNCTION get_geom_set (table_name VARCHAR2,
column_name VARCHAR2,
predicate VARCHAR2 := NULL)
RETURN SDO_GEOMETRY_ARRAY DETERMINISTIC AS
type cursor_type is REF CURSOR;
query_crs cursor_type ;
g SDO_GEOMETRY;
GeometryArr SDO_GEOMETRY_ARRAY;
where_clause VARCHAR2(2000);
BEGIN
IF predicate IS NULL
THEN
where_clause := NULL;
ELSE
where_clause := ' WHERE ';
END IF;
GeometryArr := SDO_GEOMETRY_ARRAY();
OPEN query_crs FOR ' SELECT ' || column_name ||
' FROM ' || table_name ||
where_clause || predicate;
LOOP
FETCH query_crs into g;
EXIT when query_crs%NOTFOUND ;
GeometryArr.extend;
GeometryArr(GeometryArr.count) := g;
END LOOP;
RETURN GeometryArr;
END;
CREATE TABLE dp_diss_p AS
SELECT KATUZE_KOD, sdo_aggr_set_union (get_geom_set ('dp_plochy', 'geom','CTVUK_KOD <>''1'''), .0005 ) geom
FROM dp_plochy a GROUP BY a.KATUZE_KOD;
It takes 21.721 s, but it return type of collection and I can't export it to *.shp because Georaptor export it like 'unknown' . Has anybody idea what can I do with it to export it like polygon?
Eva -
Hi all
I'm quite new to database administration.my problem is that i'm trying to import dump file but one of the table taking too much time to import .
Description::
1 Export taken from source database which is in oracle 8i character set is WE8ISO8859P1
2 I am taking import in 10 g with character set utf 8 and national character set is also same.
3 dump file is about 1.5 gb.
4 I got error like value is too large for column so in target db which is in utf 8 i convert all coloumn from varchar2 to char.
5 while taking a import some table get import very fast bt at perticular table it get very slow
please help me thanks in advance.......Hello,
4 I got error like value is too large for column so in target db which is in utf 8 i convert all coloumn from varchar2 to char.
5 while taking a import some table get import very fast bt at perticular table it get very slow For the point *4* it's typically due to the CHARACTER SET conversion.
You export data in WE8ISO8859P1 and import in UTF8. In WE8ISO8859P1 characters are encoded in *1 Byte* so *1 CHAR = 1 BYTE*. In UTF8 (Unicode) characters are encoded in up to *4 Bytes* so *1 CHAR > 1 BYTE*.
For this reason you'll have to modify the length of your CHAR or VARCHAR2 Columns, or add the CHAR option (by default it's BYTE) in the column datatype definition of the Tables. For instance:
VARCHAR2(100 CHAR)The NLS_LENGTH_SEMANTICS parameter may be used also but it's not very well managed by export/Import.
So, I suggest you this:
1. set NLS_LENGTH_SEMANTICS=CHAR on your target database and restart the database.
2. Create from a script all your Tables (empty) on the target database (without the indexes and constraints).
3. Import the datas to the Tables.
4. Import the Indexes and constraints.You'll have more information on the following Note of MOS:
Examples and limits of BYTE and CHAR semantics usage (NLS_LENGTH_SEMANTICS) [ID 144808.1]For the point *5* it may be due to the conversion problem you are experiencing, it may also due to some special datatype like LONG.
Else, I have a question, why do you choose UTF8 on your Target database and not AL32UTF8 ?
AL32UTF8 is recommended for Unicode uses.
Hope this help.
Best regards,
Jean-Valentin -
Sites Taking too much time to open and shows error
hi,
i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
does not open any page or central admin site and shows following error
event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error.This usually happens if you are low on hardware requirements. Check whether your machine confirms with the required software and hardware requirements.
https://technet.microsoft.com/en-us/library/cc262485.aspx
http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
Please remember to up-vote or mark the reply as answer if you find it helpful. -
White MacBook takes too much time to boot up
Hi there.
I got the topcase(keyboard) of my MacBook repaired. (White MacBook 2006) and after that it takes nearly 7 up to 10 seconds after pressing the power button that I first see apple logo and it boots up.
I'm not sure but seems like that detecting the hardwares take too much time .
any solution?
PS: I'm running Snow Leopard(10.6.2)macbig wrote:
OK, 32 seconds is not good. I don't think it has anything to do with a keyboard repair. You need to try a little maintenance: Reset Pram - http://docs.info.apple.com/article.html?artnum=2238
Repair Permissions - http://support.apple.com/kb/HT1452
Run Disk Utility >applications>utilities>disk utilities>verify disk
How much free space do you have on your HD: Right click on HD icon and select "get info" in the drop down menu (if you don't have right click capabilities, highlight your HD icon, go file in the Apple menu, and select "get info" in the drop down menu. Let us know your results.
Yes PRAM was the the problem, I've already tried it from this thread http://discussions.apple.com/thread.jspa?threadID=2303507&tstart=0
by the way thank you . -
Taking too much time to load application
Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/ -
Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.
stop the download if it's stalled, and restart your download.
-
Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
SAP GUI taking too much time to open transactions
Hi guys,
i have done system copy from Production to Quality server completely.
after that i started SAP on Quality server, it is taking too much time for opening SAP transactions (it is going in compilation mode).
i started SGEN, but it is giving time_out errors. please help me on this issue.
MY hardware details on quality server
operating system : SuSE Linux 10 SP2
Database : 10.2.0.2
SAP : ECC 6.0 SR2
RAM size : 8 GB
Hard disk space : 500 GB
swap space : 16 GB.
regards
RameshHi,
>i started SGEN, but it is giving time_out errors. please help me on this issue.
You are supposed to run SGEN as a batch job and so, it should be possible to get time out errors.
I've seen Full SGEN lasting from 3 hours on high end systems up to 8 full days on PC hardware...
Regards,
Olivier -
Itunes takes too much time to open and don´t recogneize my iphone
itunes takes too much time to open and don´t recogneize my iphone
I´ve alredy unistall and re install and didn´t work5-10 minutes is normal for me when opening iTunes. But then my library is stored on network drive which slows everything down.
There has been many posts about problems with RAID and iTunes. Don't know if any of those relate. -
Taking too much time in Rules(DTP Schedule run)
Hi,
I am Scheduling the DTP which have filters to minimize the load data.
when i run the DTP it is taking too much time in the "rules" (i can see the DTP monitor ststus package by pakage and step by step like "Start routine" "rules" and "End Routine")
here it is consuming too much time in Rules Mapping.
what is the problem and any solutions please...
regards,
sreeHi,
Time taken at "rules" depends on the complexity involved there in ur routine. If it is a complex calculation it will take time.
Also check ur DTP batch settings, ie how many no. of background processes used to perform DTP, Job class.
U can find these :
goto DTP, select goto menu and select "Settings for Batch Manager".
In the screen increase no of Processes from 3 to higher no(max 9).
ChaNGE job class to 'A'.
If ur DTP is still running , cancel it ie Kill the DTP, delete from the Cube,
Change these settings and run ur DTP one more time.
U can observer the difference.
Reddy -
Taking too much time incollecting in business content activation
Hi all,
I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
What can be the reason for it.
Please help..Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des. -
Too much time to mount Data file in Time capsule then error 8085
its taking too much time to open the folder and some times it gives this error code -8085 .. any idea ?
RegardsUse ethernet and see if you can delete the folders.. as long as you have them stored elsewhere.
The TC is not a NAS.. it is not designed as a file store.. even attempting to use it that way can lead to issues.
Read the info from our main guru.. Pondini. On why you don't do this. And ways around it.
Q3 here. http://pondini.org/TM/Time_Capsule.html -
Taking too much time using BufferedWriter to write to a file
Hi,
I'm using the method extractItems() which is given below to write data to a file. This method is taking too much time to execute when the number of records in the enumeration is 10000 and above. To be precise it takes around 70 minutes. The writing pauses intermittently for 20 seconds after writing a few lines and sometimes for much more. Has somebody faced this problem before and if so what could be the problem. This is a very high priority work and it would be really helpful if someone could give me some info on this.
Thanks in advance.
public String extractItems() throws InternalServerException{
try{
String extractFileName = getExtractFileName();
FileWriter fileWriter = new FileWriter(extractFileName);
BufferedWriter bufferWrt = new BufferedWriter(fileWriter);
CXBusinessClassIfc editClass = new ExploreClassImpl(className, mdlMgr );
System.out.println("Before -1");
CXPropertyInfoIfc[] propInfo = editClass.getClassPropertyInfo(configName);
System.out.println("After -1");
PrintWriter out = new PrintWriter(bufferWrt);
System.out.println("Before -2");
TemplateHeaderInfo.printHeaderInfo(propInfo, out, mdlMgr);
System.out.println("After -2");
XDItemSet itemSet = getItemsForObjectIds(catalogEditDO.getSelectedItems());
Enumeration allitems = itemSet.allItems();
System.out.println("the batch size : " +itemSet.getBatchSize());
XDForm frm = itemSet.getXDForm();
XDFormProperty[] props = frm.getXDFormProperties();
System.out.println("Before -3");
bufferWrt.newLine();
long startTime ,startTime1 ,startTime2 ,startTime3;
startTime = System.currentTimeMillis();
System.out.println("time here is--before-while : " +startTime);
while(allitems.hasMoreElements()){
String aRow = "";
XDItem item = (XDItem)allitems.nextElement();
for(int i =0 ; i < props.length; i++){
String value = item.getStringValue(props);
if(value == null || value.equalsIgnoreCase("null"))
value = "";
if(i == 0)
aRow = value;
else
aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --new: " +startTime1);
bufferWrt.write(aRow.toCharArray());
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
startTime3 = System.currentTimeMillis();
System.out.println("time here is--after-while : " +startTime3);
out.close();//added by rosmon to check extra time taken for extraction//
bufferWrt.close();
fileWriter.close();
System.out.println("After -3");
return extractFileName;
catch(Exception e){
e.printStackTrace();
throw new InternalServerException(e.getMessage());Hi fiontan,
Thanks a lot for the response!!!
Yeah!! I kow it's a lotta code, but i thought it'd be more informative if the whole function was quoted.
I'm in fact using the PrintWriter to wrap the BufferedWriter but am not using the print() method.
Does it save any time by using the print() method??
The place where the delay is occurring is the wile loop shown below:
while(allitems.hasMoreElements()){
String aRow = "";
XDItem item = (XDItem)allitems.nextElement();
for(int i =0 ; i < props.length; i++){
String value = item.getStringValue(props);
if(value == null || value.equalsIgnoreCase("null"))
value = "";
if(i == 0)
aRow = value;
else
aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --out.flush() done: " +startTime1);
bufferWrt.write(aRow.toCharArray());
out.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
What exactly happens is that after a few loops it just seems to sleep for around 20 seconds and then again starts off and ............it goes on till the records are done.
Please do lemme know if you have any idea as to why this is happening !!!!! This bug is giving me the scare.
thanks in advance
Maybe you are looking for
-
BSOD when starting MSMQ service as domain user Windows server 2012
Hi We have a problem with a server getting BSOD when we start a service related to MSMQ. We get the attempted execute of noexecute memory BSOD whenever we start the service as a User on the domain. When we start the service as a system local it start
-
What is the best export setting for video on blogger
What is the best export setting for video from premeire to blogger.com or blogspot.com
-
How can I get iLife for an older macbook with Snow Leopard?
I have a 2008 macbook. I just got Snow Leopard and was told I don't have the specs to upgrade to Mountain Lion. When I upgraded, I lost my whole iLife suite (I think because it was actually just a trial or sample), but I can't buy the latest version
-
Mountain Lion Toolbar not displaying properly
Hi all, I'm running Mountain Lion 10.8.2 on an iMac with Preview 6.0.1 (765.4). In Preview, I cannot see the icons on the toolbar buttons. The toolbar buttons are there and functional, but their identifier icons are blank so I cannot tell which butto
-
I installed the new version of System Update v3.14 from the Leonvo web site on my ThinkCentre A30 (8199-B2U) running Windows XP SP2, however I get the error message "an error occurred while downloading packages" when the percentage hits 15% or 17%. I