Expose' with 3 Monitors

This use to work with my old system and now I've upgraded to a new 8 core Mac...
Anyway, my main screen is the middle monitor. I love Expose' and use to be able to set Expose' to the middle lower right or middle screen lower left.
Now if I choose the left, i have to move my mouse all the way over to the left monitor and then the left of that screen. Same applies with the right screen.
Is there any way to set that so you can use Expose' and the middle screen side to side?
Thanks in advance....
Gary

Same problem here. Sometimes the Expose grid is displayed on the MacBook Pro Screen, although I have the external 24" display set as primary (with dock and status bar). I have to restart the whole machine to fix it, situation appears after some time of using.

Similar Messages

Expose with Dual Monitors

Using the ALL-Windows expose function I have found that something is buggy with 10.6's expose implementation.
when doing all window expose with my macbookpro and external monitor (some dell flatscreen) - most all of my windows on the external monitor end up in the expose grid on the macbook pro screen, though some do not...
EXAMPLE
I have the following open:
Mail
Adium
Transmission
iCal
Safari
I moved all of the above apps/windows to the external monitor and when i do all window expose they all move to the macbookpro grid except:
-transmission
-1 of 2 safari windows
-1 of 2 mail windows
I feel like this is a bug, if it's a feature - i cant seem to make sense of it. Any ideas?

Same problem here. Sometimes the Expose grid is displayed on the MacBook Pro Screen, although I have the external 24" display set as primary (with dock and status bar). I have to restart the whole machine to fix it, situation appears after some time of using.

Why T430 connect with monitor through VGA can only have 60 fps refreash rate?

I have a T430 and T420.
When I connect the T420 with monitor through VGA, the refreash rate of the monitor can be 75 fps in 1600*900. But When I connect the T430 with the same monitor through VGA, the refresh rate can only be 60 fps, no 75 fps option in the list, Anybody has idea why it works like this?
Thanks very much.

Actually, on second thought, does the external monitor show up as "Generic PnP monitor" in Device Manager? Or does it show up as the correct model number?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

How to get the application expose with a mouse

Hi,
I want to get a quick overview of all open windows of the SAME application (= application expose). Normally, you can do this with your trackpad (three or four fingers down movement); I am now working with a "normal" (non-Apple) mouse and keyboard. How do I get the application expose with the mouse? I am able to quickly get the misson control wiht CTRL + right mouse click; and I am getting the App expose with shift + arrow down.
Isn't there a way to get the application expose with the mouse as well? E.g. CTRL + Shift + right click would be very useful but that's taken by the 'slow moving' mission control.
I know, it's a minor detail but it would be quite good for the workflow
Any hint is most welcome. Many thanks.

grab all the code inside the actionPerformed(ActionEvent e) method

I can't get any sound through speakers with monitoring on either - using imac with guitarlink audio interface

I can't get any sound through my speakers with monitoring on - i'm using a behringer usg102 audio interface and garageband is recognizing the input - i just can't hear the output - any suggestions? thanks!

vickyfromla quinta wrote:
i have the usb selected as the input device
and the output?
vickyfromla quinta wrote:
but it won't allow me to set the input level. when i try to move the slider, it automatically moves itself back to the far left side.
that's not the problem:
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled
(Let the page FULLY load. The link to your answer is at the top of your screen)

Regarding Video Capture Utility with Monitoring

Hi everyone,
I downloaded the "Video Capture Utility with Monitoring" example. i want to make a few changes to it.
Along with recording the video i want to capture images as well(from the video stream itself) at regular intervals of say 6 seconds.
This is where i found the Recording Video Utility example.
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/JVidCap.htmlThis example uses a Processor, i tried to create a player object from media locator and then grab frames but it didnt work out.
Can anyone help? I am new to JMF.
Edited by: ashish.kumar.shah on Mar 28, 2009 10:06 PM

ashish.kumar.shah wrote:
Can anyone help? I am new to JMF.TBM and I developed some code a while back that does this...
[http://forums.sun.com/thread.jspa?messageID=10596692#10596692]

Mini dvi to dvi adapter not working with monitor

arright *** i got a mini dvi to dvi adapter which is connected to my vga monitor through a vga to dvi adapter. The computer recognizes the monitor in display preferences, but the monitor doesn't display anything it just sits in standby mode... any ideas why this isn't working? You'd think if the problem was going from vga-vga to dvi adapter-dvi to mini dvi adapter that it wouldn't even recognize the monitor but it does.
well that *****, back to best buy to get the other one. Reason i got the dvi one is because i plan on getting a different monitor with dvi soon. But noo dvi adapter wont work with vga adapters.
Message was edited by: Veiss

The mini-DVD to DVI adapter doesn't pass through the analog video signals needed for VGA, so won't work with a DVI to VGA adapter. All the control signals are there, so the display is recognized, but there will be no picture.
They could have used a DVI-D connector on the adapter, instead of DVD-I, so the DVI to VGA adapter wouldn't even plug in, but then it couldn't be used with some non-Apple LCDs, that use DVD-I connecters.

Mac mini 2009 . Mini DVI - VGA adapter with Monitor LG L1953S . No sleep .

Hi ..
Yesterday i started in the fabulous world of MAC with my brand new MAC MINI . The problem that i have is that when the MAC mini is in stand-by the monitor is not in sleep state , and i get in the monitor screen " check cable " . So i have to disconnect manually the monitor when mac is in sleep state .
I am using mini-dvi to vga adapter (original mac ) .
¿What is the problem ?
Thanks a lot ...

DVI-I provides the direct Analog signals needed to get VGA using a very simple adapter.
DsiplayPort (and its Mini variant) requires a converter to produce VGA or Dual-Link DVI, and the converter must be active/powered. There is a lot of logic in those converters. It may also have additional limitations.
In general, you should hook your highest resolution, most demanding display up with the DVI to VGA adapter.If running two Mini DisplayPort displays, ALL MiniDisplayPort converters must be active/powered.

Is there a way to run firefox at a higher frame rate for those with monitors capable of 120hz?

I noticed that IE is smooth as silk when browsing websites compared to firefox. Is there an add-on or a setting I can change so that I can take advantage of my monitor which runs at 120hz?

ksinks wrote:
Thanks, how would you synchronize the loops? I have gone through the Getting Started exercises and manual.
Why would synchronization matter? Did you want them to run independantly at their own speed or not?
Regardless, there's a synchronization pallette with functions for this, as Occurance.
Other solutions include a common loop counter and a case structure executing every X'th iteration, or having the faster loop send a queue or event every X'th loop that controls the slower loop.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How to use MBP with monitor?

I have a 2011 MBP 13" and want to use with a larger monitor when at home. Can I use with any other monitor or do I have to have an Apple monitor.
Ideally I would like the cheapest option but want the resolution and quality to be the same on the MBP and the monitor.
I will be using the monitor with a keyboard or mouse so the MBP can be shut!
I will appreciate any help.
Zoe

Read here:
http://support.apple.com/kb/HT3131
As far as what monitor, look at this, absolutely gorgeous:
http://www.dell.com/content/topics/topic.aspx/global/products/monitors/includes/ en/ultrasharpmonitor_ips?c=us&l=en&cs=04
And this:
http://store.apple.com/us/product/MC914LL/A?fnode=MTY1NDA5OQ

K9N2 SLI Platinum video won't initialize with monitor connected

Hi,
I've gone through the RMA process with my vendor and I am on my third motherboard right now and I am still having an issue (so, basically, nightmare scenario here ). The first and second motherboard failures seemed slightly different but the failure seems to be the same for the second and third and it is making me think that another factor may be at play other than the motherboard. All of the failures have been with the integrated video (which is all I plan to use at the moment --I don't even own a PCI-E video card right now nor have any plans to get one in the near future).
In the first motherboard, everything seemed to work (as far as I could tell --4 green diagnostic LED's and all that) but no video signal was produced. Testing with an antediluvian Virge DX based PCI card (some of you kiddies may be too young to remember such things) did show normal booting with that video card (as far as I allowed it to go) and I suspect, from the pattern of hard drive activity, that with the integrated video the boot process was also normal (I just couldn't see it because of no video signal being produced). But that is past and has been RMA'd.
The replacement motherboard and the motherboard replacing the replacement motherboard, on the other hand, have seemed unable to initialize video whenever my monitor is connected but if the monitor is not connected, they work fine (but then video defaults to a 1028x768 mode and I cannot run my monitor at native resolution). Curiously enough, my second motherboard worked correctly twice before exhibiting the described behavior making me think, at the time, that I just got really unlucky and simply had had it fail shortly after testing it those two initial times.
Not being able to initialize video while the monitor is plugged in means that if I try to start it while the monitor is attached, the motherboard will not even POST and that the diagnostic LED's will be stuck at the video initialization stage (three reds, and one green at group 4).
Furthermore, if I start it with no monitor attached and plug the monitor in after I get 4 green LED's, it will start booting the OS (Windows XP) but the screen will go black when the Windows XP logo should be appearing. I can also leave it unplugged until it should be at the Windows XP logo stage (or plug it after the 4 green LED's and unplug it again before the video mode switch happens) and when I plug it back in I can see the Windows XP logo. However, as soon as it switches to the Windows XP desktop, I get a black screen.
And again, if I leave the monitor unplugged until the Desktop should be showing up and I plug it in at that point (or go through the process of plugging and unplugging the monitor while avoiding having video mode switches happen with the monitor plugged in) I do get a Windows desktop at the 1024x768 resolution. Once in the desktop, as far as I can tell, I can do anything there that I normally would be able to do (so I mostly have a working system, as far as I can tell). I have even installed drivers, verified that the sound works, etc.. I will still do a repair install at some point because I am not doing this the "right way" and I probably needed to do it anyway (though I think it's using the right kernel and everything --showing 3 CPU's, etc.) but I am not looking for answers with that as my issue shows up before the system even goes through POST. Again, note that I cannot even take advantage of my monitor's native resolution with the current kludge.
Curiously enough, if I try to switch to my native resolution of 1920x1200 it will do it but only by switching me to a virtual 1920x1200 desktop on a 1024x768 display (so there's no actual video mode switch involved and the desktop becomes bigger than what my monitor can show). It's as if part of the subsystem is reading the monitor and "knows" that it supports 1920x1200 but another part of the subsystem is just assuming some sort of 1024x768 default common lowest denominator for digital displays. I attribute this to the fact that video has been initialized with no monitor connected.
I originally had a 350W Enermax power supply (which worked as long as the monitor was not plugged in) supplying 32A on the +3.3V rail, 32A on the +5V rail and 26A on the +12V rail but I replaced it with the power supply shown on my profile (which was probably totally unnecessary as I'm only using the integrated video --but hey, I now have a blue light coming from my power supply so that makes it all worth it ). I suppose both power supplies could work badly with this motherboard model but it seems exceedingly unlikely that that would be the case (specially since everything works as long as there is no monitor plugged in during video mode switches).
I currently am running it, on cardboard, with a single stick of RAM (on the slot next to the CPU) and nothing else connected to it except the power supply (including JPW3 & JPW4), the CPU, a hard disk with a working Windows XP install, a mouse on the mouse port and a keyboard on the keyboard port (specification as on my profile minus one RAM module). I did play with RAM timings at the request of tech support but I can't imagine how it could be a RAM problem when everything works as long as a monitor isn't plugged in during video mode switches.
I did update the BIOS from 3.4 to 3.5. 3.5 did not seem to be available at the time of my previous motherboard and I knew it was a real long shot for this to be a BIOS issue that would be fixed with the 3.5 update (specially since the update mentions only CPU support stuff and nothing about video) but I am desperate. Yes, I have done the whole resetting the CMOS thing.
I am even considering the possibility that there may be some weird incompatibility between the video on this board and my monitor (under the assumption that, quoting Holmes, once you have eliminated the impossible, whatever remains, however improbable, must be the truth). I don't even know how that would work. Note that my monitor worked in my previous system with the digital input (my previous system is no longer available to me for testing --but I did get a chance to test it, after having problems with my first K9N2 SLI Platinum motherboard which I returned, and it worked). Note that my monitor works with the system in question (I simply cannot have it connected while there's a video mode switch under way). Note that the lack of a picture seems to be related to the motherboard as evidenced by it being stuck at the video initialization stage if I attempt to start it with the monitor connected.
Any wild ideas? I do not want to return this motherboard a third time and I specially do not want to return this motherboard a third time if it's something that can be easily fixed.

Quote from: Svet on 25-May-09, 02:21:06
Have you tried with just memory stick in 1st DIMM near to CPU socket and mainboard out of PC case?
Yes, I currently am running it, on cardboard outside the case, with a single DIMM (on the slot next to the CPU) and nothing else connected to it except for the power supply (including JPW3 & JPW4), the CPU, a hard disk with a working Windows XP install, a mouse on the mouse port and a keyboard on the keyboard port (specification as on my profile minus one RAM module). And it works,... as long as the monitor is not ever connected while video mode switches occur (including power on). And this is exactly how the previous motherboard which I returned also behaved.
Addendum: As an additional note, I have tried the other DIMM on the same socket by the CPU with the same results (everything works as long as there's no monitor connected during a video mode switch). I also managed to make a bootable Memtest86+ (is that what people use to test memory these days?) USB stick and I am running it right now. It has shown no errors right so far but it has only been running a few minutes. I do not really expect any memory errors to be at fault since they would have to be magical memory errors which only cause problems when there is a monitor connected while a video mode switch is happening but I'm desperate to try anything to find out what the issue is.

HT1752 I have an old iMac (the rounded type with monitor). I need a new keyboard and mouse. Will any work? thanks for any help!

I have an old iMac for 2002....it's the rounded type that has an attached monitor. The software is way outdated (OS X 10) and I only really use now to access 3,000 plus songs and old video of the family. Both the keyboard and mouse no longer work. Am I able to use any keyboard/mouse and plug in using USB? Thanks for any help!

Most any USB mouse or keyboard should work. Borrow one if you can and just plug it in.
If the USB circuits are at fault then you can access via Firewire Target Mode with another Mac in order to get at the files.
http://support.apple.com/kb/HT1661
Another alternative would be to remove the hard drive and use a USB adapter to access it as an external drive.
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/

Issue with Monitoring of Subscription Orders

Dear Experts ,
Recently we are facing an issue in the monitoring of subscription orders.
We have scheduled the Monitoring ( Tcode : JKRM) in the background during the night time. Since last few days, our basis guy is complaining about creation of too many archive logs due to this. I am not sure whats to be done for this. Hence seeking your help in this. Please suggest what needs to be done for this so as to avoid creation of un necessary archive logs.
Regards,
Chintu

Hi Chintu ,
SAP has a standard functionality of creating the archive log in the system whenever any transaction is processed (Table Name : BALDAT).
In your case , there can be 2 reasons for creation of unnecessary archive logs :
1. There are lot of subscription orders which are in Error ( Check the monitoring log )
2. You are running transaction JKRM with Record Success Messages in Application Log check box On. If this check box is on at the time of monitoring , system will try to record each and every activity done for the individual subscription order ( Either Suspension , termination, closure or offer creation) though it is not in error.
Hence I will suggest you to check which of the above 2 reasons causing you trouble.
Please check the same and Get back to me.
Regards,
Nikhil

Problems with Monitor after Hard Drive Replacement

I never had any problems with my iBook G4 until the past 6 months. I sent it in once because it wouldn't start up. They were able to fix the problem without replacing the hard drive. It malfunctioned again and the second time they had to replace the hard drive. I've had it back for about a month and 1/2 now and for the past three weeks, whenever I try to use it I get problems with my monitor. I'm not sure if the video card is going out or what? The image on the screen gets chopped up in horizontal and vertical line increments. Its really hard to explain but sometimes it comes in waves and I have to shut down my computer and walk away from it. Other times like right now, I'm able to use it for up to an hour but then it gets choppy again and I can't use it. My Apple Care Protection Plan expires in December and I want to get as much from it as I possibly can before I have to replace the laptop altogether.

sorry,
to clarify, "internal or external;" display
internal = ibook display
external = display connected via display adaptor
Ok, well I max out the graphics on my ibook on regular intervals (games, high-end graphics work, gigabyte photoshop files etc...)
It isn't likely to be the hardware, so here's some suggestions.
LOOSE WIRES/CABLES:
The ibook's internal monitor connects through the central pivot where the ibook opens, the wires in here may be damaged. (you can't fix this yourself, refer it to apple) this could pertain to a loose or defective cable is you are using and apple display connector also.
REFRESH RATE: (this sound like your problem)
to quote a source:
"If the refresh rate is not properly set the monitor may have a wavy or an appearance that lines are going down or across the monitor slowly or fast. This may also cause a flickering affect."
http://www.computerhope.com/issues/ch000242.htm#02
This is set in display preferences. try setting your monitor's refresh rate. (75hz is good)
INTERFERANCE:
Monitors are succeptible to electromagnetic interferance: Speakers, hard drives, phones etc. try moving them away from the monitor.
BAD MONITOR:
finally; and we hope this isn't the problem. if you are not already doing so, connect an external monitor to the ibook using the display connector (VGA only), if the issue persists with the external monitor the problem is software based, if not you probably have once of a small percentage of monitors that just goes "bad" after a time period, unfortunately it's often cheaper to replace an entire unit as opposed to the screen itself (new computer)
Message was edited by: Peter Miller

Problem with monitor a job

Hi all,
I am running a job which loads data from one DSO to another DSO . The update rules have a start routine which extract data from APO livecache using 2 -3 functional modules for some characteristics of the target DSO .
Earlier this load was taking 1.5 hours to finish but now its just taking more than 4 hours and this job is occupying all system resources and so other jobs are kept in hanged state.
I want to know :
1> How can i monitor the jobs ? i mean how to monitor the jobu2019s system resource utilization (number of processors) ?
2> How can i reduce the time of load ?
Thanks
Sam
Edited by: Samir Bihari on Nov 12, 2009 10:40 AM

Hi,
With job monitoring, you can monitor individual jobs in the Alert Monitor with regard to status and runtime. This is an important extension of the monitoring of the background runtime environment (see Background Processing Monitor), in which the general status of the SAP background processing is monitored (for example, with regard to utilization or job terminations).
The job monitoring is used to monitor jobs that run regularly, that are always scheduled using a particular name or name pattern (such as a fixed job name with a timestamp). A job of this type is called a job chain.
For more info go through the below link
http://help.sap.com/saphelp_nw70/helpdata/en/60/cd49ff274aa240a7291286ec797618/content.htm
If your Data load are independent with each other you can schedule in Parallel and this will reduce your data load time with comparison to series load. When you are loading data in parallel, you have to keep your Background workprocess in mind. If you have three workprocess and four parallel data load in process chain, fourth will wait until it gets the free workprocess.
The staging process of any significant volume of data into SAP BW presents challenges to system resource utilization and timeliness of data. This session discusses the causes of data load performance issues, highlights the troubleshooting process, and offers tuning solutions to help maximize throughput. Many aspects of data load performance analysis and tuning are covered including extraction, packaging, transformation, parallel processing, as well as change run and aggregate rollup.
For more info go through the below link
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b&overridelayout=true
Regards,
Marasa.

Expose' with 3 Monitors

Similar Messages

Maybe you are looking for