Exposure Changing During Upload?
First, I'm new to Aperture and so this may be how it was designed. Every time I upload RAW images to Aperture 3.2, it darkens them during the processing that occurs directly after the import is finished. I can actually see all the pictures darkening in thumbnail view while it processes them, just like if I had messed with an images exposure then stamped all the others in the event with that adjustment at once. No adjustment presets are applied during import.
I'm using a Nikon D90, if that makes any difference.
Thanks!
P.S: here are some pictures illustrating the problem, I know they're nasty, but I just wanted something quick for an illustration:
Before import:
After import:
Bit of advice, NEVER rely on your LCD for decisions, the variables in lighting that effect the way your LCD displays an image are enourmous.
Learn to use and rely on your cameras histogram, you will find that this does match closely to Aperture.
If you really want to get super accurate try the following
Ensuring your exposure is sitting where you want it on the histogram in camera and then comparing that to the histogram in Aperture is your first step in this process of getting things to reproduce correctly. Try grey, white and black cards in the one image, setting your exposure from a spot reading on the grey card. this will give you three disctinct and clear lines on your histogram that you can use to compare your cameras LCD histogram and Apertures histogram
Tony
Similar Messages
-
Exposure change in upload?
I have no presets marked to run(that I know of), and my raw images look great, but the first time I look at them individually, they change a full stop brighter... What is going on! I correctly expose each image and am having to overhaul them in LR. Please help!
JennyThere may be a camera setting like a light optimiser etc that Lightroom isn't able to access, but I'm not familiar enough with the D300s to say. You could also have a default setting through the 'Set Default..' option that becomes available when you hold down the Alt/Option key in Develop-this turns the Reset button at the bottom of the right panel into the Set Default button. You can restore the original defaults from there.
-
How to fix exposure changes made by Photoshop during panorama creation?
Hi There,
I have a panorama created by Photoshop but need to tweak some of the joins which is not an issue. But when I paint out/paint in objects from different layers, I've noticed that the exposure within the same layer has been changed by photoshop which creates a line.
It's like photoshop applied exposure changes to the visible parts of the layer after blending - instead of applying them to the entire layer before blending?
See the image below, that boat is all on the same layer but there's a line through the middle - how do I gain access to the exposure changes so I can paint/blend that line?
Any pointers in the right direction would be much appreciated.
Cheersthe .xmp files are only generated if the file you are working on doesn't support metadata but JPG files support it so the information is written inside them. If you want to "flatten" the file so that the pixel information gets changed then you will have to resave the files which isn't something that you should do very often with JPG files (preferably only once).
To mass save files you can either select them and go to Tools->Photoshop->Image Processor (but this will launch Photoshop) or open them up in Camera Raw, select all of them in the film strip and select Save Images -
Auto selection of file from folder during uploading??
Hi all friends,
Iam facing with one problem I am developing one uploading software for that i have used swing and servlet.Now my problem is i want to give auto selection of file from one folder means user just copy the files from any computer on network and paste it in predefind folder.And when they click on upload button it should start uploading of file one by one and after completion of uploading it move that file into another folder one by one.Now my software doing it perfectly but if user copy and paste any file in that predifined folder from network computer during uploading then they have to click upload button again after completion of first queue of files(for example if user first copy 10 files and start uploading and inbetween uploading of that 10 files if user copy another 10 files from network computer then they have to click on upload button again after completion of uploading of first 10 files).But my user requirement is they want to click on upload button once only at the time of starting my application and my application automatically select the file one by one from folder and send it to destination.Means if they copy the file from network machine inbetween uploading or any other user from network send file in that folder then my application should select those file automatically and start uploading means they don't want to click on upload button again.Can any one plz guide how I can slove this problem.Below r my codes:-
Upload.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
try {
suspendflag=true;
Resume.setEnabled(false);
Suspend.setEnabled(false);
dest=frame.m_txtURL.getText();
File ff=new File("d:\\DTMS\\Upload");
File[] files = ff.listFiles();
fileList = new Vector();
if(files == null)
textArea.append("There is no file");
return;
else
for (int j = 0 ; j< files.length ; j++)
fileList.add(files[j]);
java.util.Collections.sort(fileList, new FileComp());//sorting by size
new Thread(new Runnable() {
public void run(){
for (int k = 0; k < fileList.size(); k++)//loop for queue {
File fname = (File)fileList.get(k);
String str=fname.getName();
log("Destination:" +" "+ dest);
log("Uploading Progress\nPlease Wait....");
result=doPost(fname,dest);//method for read file & send to servlet
String str2="Transfer apparently failed.";
String str3=result;
if(str2.equals(str3)){
Error(result);
else if(suspendflag==true){
File newfile =new File("d:\\DTMS\\Archives\\"+str);
fname.renameTo(newfile);
log("File" +" "+ str+" "+"Upload Completed !");
else if(suspendflag==false){
Error("** Transfer Suspended**");
}).start();
}catch(Exception exp)
Error("Error : " + exp.toString());
Regards
BikashHi Chandan,
All the multiselection files are stored in it_tab( i:e file_table in method). you need to loop the every record to upload the data for selected files. please check the code Below...
DATA: file_str1 type string.
data: it_tab TYPE STANDARD TABLE OF file_table,
wa_tab TYPE file_table,
lw_file LIKE LINE OF it_tab,
gd_subrc TYPE i.
SELECTION-SCREEN begin of block blk with frame title text-100.
SELECTION-SCREEN SKIP 2.
parameters : p_file like rlgrap-filename .
SELECTION-SCREEN end of block blk.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Select only Text File'
default_filename = '.azt'
multiselection = 'X'
CHANGING
file_table = it_tab
rc = gd_subrc.
*READ TABLE it_tab INTO lw_file INDEX 1.
*p_file = lw_file-FILENAME.
Start-of-Selection.
loop at it_tab INTO wa_tab.
file_str1 = wa_tab-FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_str1
* filename = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\test.azt'
tables
data_tab = it_string
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP. -
Facing problem during uploadation of Routing data using CA01-BDC - URGENT
Dear All,
When I am trying to upload Routing data using CA01 in the Table Control scenario, then I am facing problem as my last 2 records are not getting uploaded from my Test file.
For example, I am having 47 records in my Test File and after setting Default size parameters (to avoid screen resolution problem)
I have 15 table control line items data per page. The Page down logic ('=P+') is working fine, but my below BDC code failed to take
the remainder last 2 records from the Test File.
Analysis: When I am running my Call Transaction bdc in foreground, then the 1st page down occurs after 15th record, 2nd page down occurs after 29th record( as in Table Control 1st pages 15th record is coming on the Top of 2nd page). 3rd page down occurs after 43rd record
(as 2nd pages 29th record is coming on the top of 3rd page). In the 4th Table Control Page 43rd record of previous page is coming on top, and then its taking 44th & 45th records from the Test File and then it is triggering SAVE (=BU). Thus, our last 2 records
(i.e. 46th, 47th record) are not getting uploaded in the routing screen from our Test File.
If anybody has encountered this scenario previously, please help me URGENTLY in fixing the bugs here. Its VERY, VERY URGENT
FYI. For others 45 successful records already uploaded, all the screen fields values are coming properly in the routing screen, and here there is no issue.
Thanks very much
Thanks & Regards
Sudipta Project Lead
Volvo Client Location
I am pasting my BDC source code below:
REPORT ZRT1_UPLOAD_CA01_F
NO STANDARD PAGE HEADING
LINE-SIZE 255.
I N C L U D E S *
Include for Data Declarations
INCLUDE zrout_top.
Include for Forms
INCLUDE zrout_form.
INCLUDE zrout_include_f_ca01.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR <field>
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Attaching F4 help with filename
PERFORM F1001_GET_F4.
S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Perform to read the input file
PERFORM f_read_file.
Perform to fill the BDC data
PERFORM f_fill_bdctab.
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
FREE: i_bdcdata,
i_messtab,
i_record.
x----
*& Include ZROUT_TOP *
D A T A B A S E T A B L E S *
TABLES: t100. "Messages
D A T A D E C L A R A T I O N S *
T A B L E T Y P E S *****************************
For input data
TYPES: BEGIN OF ty_record,
matnr(18), "Material Number
werks(4), "Plant
verwe(3), "Usage
statu(3), "Status
arbpl(8), "Work Center
steus(4), "Control Key
ltxa1(40), "Description of Operation
bmsch(13), "Base Quantity
meinh(3), "Unit of Measure
vgw01(11), "Machine
vge01(3), "Unit of measure of activity
END OF ty_record.
I N T E R N A L T A B L E S ***********************
Internal Table for input file name
DATA: i_file_tab TYPE STANDARD TABLE OF sdokpath INITIAL SIZE 0.
Internal Table for BDC Data
DATA: i_bdcdata TYPE STANDARD TABLE OF bdcdata INITIAL SIZE 0.
Internal Table for BDC Messages
DATA: i_messtab TYPE STANDARD TABLE OF bdcmsgcoll INITIAL SIZE 0.
Internal Table for Input file
DATA: i_record TYPE STANDARD TABLE OF ty_record INITIAL SIZE 0.
W O R K A R E A S *************************
Work Area for input file name
DATA: wa_file_tab LIKE sdokpath.
Work Area for BDC Data
DATA: wa_bdcdata LIKE bdcdata.
Work Area for BDC Messages
DATA: wa_messtab LIKE bdcmsgcoll.
Work Area for Input file
DATA: wa_record TYPE ty_record.
V A R I A B L E S ****************************
DATA: v_filename TYPE string,
v_fnam(40) TYPE c.
DATA: wa_opt TYPE ctu_params.
C O N S T A N T S ***************************
CONSTANTS: c_werks TYPE rc27m-werks VALUE 'tp',
c_steus TYPE plpod-steus VALUE 'PP01'.
*Selection Screen.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS:
Input file name
P_FILE TYPE rlgrap-filename OBLIGATORY. " DEFAULT 'C:\'.
SELECTION-SCREEN END OF BLOCK B1.
x----
*& Include ZROUT_FORM *
*& Form f_fill_bdctab
Form to fill the BDC Data
FORM f_fill_bdctab.
TABLES mapl. "Assignment of Task Lists to Materials
DATA: l_cnt_item(3) TYPE n VALUE 1. "Line item counter
DATA: first(3) TYPE n VALUE 16. "Line item counter
DATA: next(3) TYPE n . "Line item counter
DATA: lin(3) TYPE n . "Line item counter
DATA: l_v_bmsch(13), "Base qty
l_v_meinh(3), "Unit of Measure
l_v_vgw01(11), "Machine
l_v_vgw02(11), "Labour
l_v_vge01(3). "Unit of measure of activity
DATA l_v_nextline TYPE sy-tabix.
DATA wa_temp TYPE ty_record.
Initialize Counter
l_cnt_item = 1.
SORT i_record BY matnr.
LOOP AT i_record INTO wa_record.
AT NEW matnr.
REFRESH: i_bdcdata,
i_messtab.
SET PARAMETER ID 'PLN' FIELD space.
SET PARAMETER ID 'PAL' FIELD space.
PERFORM f_bdc_dynpro USING 'SAPLCPDI' '1010'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
Material Number
PERFORM f_bdc_field USING 'RC27M-MATNR'
wa_record-matnr.
Plant
PERFORM f_bdc_field USING 'RC27M-WERKS'
c_werks.
PERFORM f_bdc_field USING 'RC271-PLNNR'
Check if routing already exits for the material
SELECT * FROM mapl
INTO mapl
WHERE matnr EQ wa_record-matnr
AND werks EQ c_werks
AND plnty EQ 'N'.
IF sy-subrc EQ 0.
PERFORM f_bdc_dynpro USING 'SAPLCPDI' '1200'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=ANLG '.
ENDIF.
ENDSELECT.
perform f_bdc_dynpro USING 'SAPLCPDA' '1200'.
perform f_bdc_field USING 'BDC_OKCODE'
'=VOUE'.
Group Counter
perform f_bdc_field USING 'PLKOD-PLNAL'
Usage
PERFORM f_bdc_field USING 'PLKOD-VERWE'
'1'.
Status
PERFORM f_bdc_field USING 'PLKOD-STATU'
'4'.
ENDAT.
PERFORM f_bdc_dynpro USING 'SAPLCPDI' '1400'.
Check if page is full
IF l_cnt_item EQ '16'.
Page down
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=P+'.
l_cnt_item = 1.
ELSE.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
CLEAR v_fnam.
Populate item level details
Work Center
CONCATENATE 'PLPOD-ARBPL(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-arbpl.
Control Key
CONCATENATE 'PLPOD-STEUS(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
c_steus.
Description of Operation
CONCATENATE 'PLPOD-LTXA1(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-ltxa1.
Base Quantity
CONCATENATE 'PLPOD-BMSCH(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-bmsch.
Unit of Measure
CONCATENATE 'PLPOD-MEINH(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-meinh.
Machine
CONCATENATE 'PLPOD-VGW01(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-vgw01.
Labour
CONCATENATE 'PLPOD-VGW02(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-vgw02.
Unit of measure of activity
CONCATENATE 'PLPOD-VGE01(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-vge01.
l_cnt_item = l_cnt_item + 1.
CLEAR wa_record.
AT END OF matnr.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=BU'.
wa_opt-DISMODE = 'A'.
wa_opt-DEFSIZE = 'X'.
wa_opt-UPDMODE = 'S'.
PERFORM f_bdc_transaction USING 'CA01'.
Initialize Counter
l_cnt_item = 1.
ENDAT.
ENDLOOP.
ENDFORM. " f_fill_bdctab
x----
*& Include ZROUT_INCLUDE_F_CA01 *
*& Form f_read_file
Form to read the file from presentation server
FORM f_read_file .
To get the file name
DATA l_v_file TYPE string.
l_v_file = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_v_file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = i_record
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDFORM. " f_read_file
*& Form f_bdc_dynpro
Form to populate BDC Tab for new screen
-->fp_program Screen program name
-->fp_dynpro Screen Number
Start new screen *
FORM f_bdc_dynpro USING fp_program fp_dynpro.
CLEAR wa_bdcdata.
wa_bdcdata-program = fp_program.
wa_bdcdata-dynpro = fp_dynpro.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO i_bdcdata.
ENDFORM. "f_bdc_dynpro
*& Form f_bdc_field
Insert field *
FORM f_bdc_field USING fp_fnam fp_fval.
IF NOT fp_fval IS INITIAL.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = fp_fnam.
wa_bdcdata-fval = fp_fval.
APPEND wa_bdcdata TO i_bdcdata.
ENDIF.
ENDFORM. "f_bdc_field
*& Form f_bdc_transaction
Call transaction and error handling
-->fp_tcode Transaction code
FORM f_bdc_transaction USING fp_tcode.
DATA: l_mstring(480),
l_color TYPE i,
l_mode TYPE c.
REFRESH i_messtab.
CALL TRANSACTION fp_tcode USING i_bdcdata
OPTIONS FROM wa_opt
MESSAGES INTO i_messtab.
Messages during upload
LOOP AT i_messtab INTO wa_messtab.
CASE wa_messtab-msgtyp.
WHEN 'S'.
l_color = 5.
WHEN 'E'.
l_color = 6.
WHEN 'W'.
l_color = 3.
ENDCASE.
FORMAT COLOR = l_color.
SELECT SINGLE * FROM t100 WHERE sprsl = wa_messtab-msgspra
AND arbgb = wa_messtab-msgid
AND msgnr = wa_messtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH wa_messtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH wa_messtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH wa_messtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH wa_messtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH wa_messtab-msgv1 INTO l_mstring.
REPLACE '&' WITH wa_messtab-msgv2 INTO l_mstring.
REPLACE '&' WITH wa_messtab-msgv3 INTO l_mstring.
REPLACE '&' WITH wa_messtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
WRITE: / wa_messtab-msgtyp, l_mstring(250).
ELSE.
WRITE: / wa_messtab.
ENDIF.
FORMAT COLOR OFF.
ENDLOOP.
SKIP.
ENDFORM. " f_bdc_transaction
FORM F1001_GET_F4.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SY-REPID
DYNPRO_NUMBER = SY-DYNNR
FIELD_NAME = P_FILE
CHANGING
FILE_NAME = P_FILE
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
File is not selected
MESSAGE I000 WITH TEXT-M01.
ENDIF.
ENDFORM. " F1001_GET_F4Sudipta,
Would request you to post this to ABAP-Forum for Immediate response.
I had this problem, but the ABAP guy did something to correct this...it was more of screen resoultion difference between the recorded system and uploading system. Please try to use the same system which was used to record and try.
Regards,
Prasobh -
Adjusting and matching time lapse exposure changes? (without deleting photo's)
Ok I am fairly sure there is no way around this but to do it manually... but just in case someone else knows a better way...
What's the best way to compensate for exposure changes captured during a long time lapse? (without deleting any images) (eg. a full day time lapse taken on a cloudy/sunny day)
Here's some more details...
I recently set up a 6hr indoor stadium time lapse during a cloudy/sunny day. All the settings were set to manual so that shutter (for motion blur), ISO, aperture (for depth of field) and white balance were consistent. I shot it in raw and it looks good... BUT every time the sun is covered by a cloud the exposure drops way down causing an overall 'exposure flicker' type effect when you put it all together.
So after searching for a while, I ended up manually adjusting over 1000 photo's, tweaking the exposure and eyeballing the histogram to be consistent (as 'Match total Exposures' didn't work in this manual mode instance). The result is 10x better, BUT I would love to be able to automate this process somehow as it would save me hours upon hours... any ideas? Any simpler ways?
The only automated solution I can think of at the moment is to set the camera to shutter priority in the future, but I'm not sure if the aperture / depth of field changes would cause problems when doing this.
Thanks for any ideas! I'm always learning and appreciate any input!Codebreaker3 wrote:
I'm not sure that you will get good results if you try to normalise the exposure when dealing with large changes in luminance e.g. clouds moving in because that's the way the scene is at that time.
I understand what you mean, but in my case adjusting the overall exposures to be roughly the same made a huge difference and made the overall timelapse much better... 'smoother', less flickery to watch... it was probably because this time lapse was taken in an indoor stadium so the overall environment wasn't changing like it would in a cloud or nature timelapse. The problem was just that the overall stadium exposure would change according to the weather/clouds outside the stadium. I haven't heard of the Granite Bay Software so thanks for that link... I have tried LRTimelapse and it has a great feature to reduce the exposure changes for long term timelapses, but it also involves removing the images which have extreme exposure changes which is not what I wanted in this instance, I needed every image to remain in the timelapse. I think the manual method unfortunately is the best bet for this sceneriao, but I really appreciate all the ideas and suggestions! -
I using FF-5-Stable. It much slower than Google Chrome 13. & crash during upload ??
it takes too much time to open a page.
Always Crash during upload..for big or small file..
It hangs and closed through Task manager or Reboot...1. What are you "uploading"?
2. Have you tried a new Profile? Profiles don't last forever, and after going through a few major version updates "things" slow down, depending upon how much stuff the user has added to Firefox. Personally, I have created a new Profile for every new version of Firefox I have installed, up through Firefox 4.0. Didn't do that for Firefox 5, and probably won't for Firefox 6, due to the new fast release schedule and the fact that Firefox isn't being changed as much from one version to the next as it used to be changed under the 10 to 14 month intervals between major versions.<br />
http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows -
Capturing the details of data in which error occured during uploading
Hi, anyone tell me how to Capturing the details of data in which error occured during uploading the file using BDC in backgroung mode. Please do the needful
Thanks & Regards.
Aniruddhahi,
This declaration is used to capture the error msg. V is the std table that captures that.i have given a sample code with this..pls chk it out..
data: err type standard table of bdcmsgcoll with header line.
SAmple code:
report z_aru_bdc_new4
no standard page heading line-size 255.
include bdcrecx1.
Generated data section with specific formatting - DO NOT CHANGE ***
parameters: p_file like rlgrap-filename obligatory.
data: err type standard table of bdcmsgcoll with header line.
data: mess(200) type c.
data: begin of it_err occurs 0,
msg(200) type c,
end of it_err.
data: begin of record occurs 0,
data element:
viewname_001(030),
data element: VIM_LTD_NO
ltd_dta_no_002(001),
data element: ZEMPID3
zempid3_003(004),
data element: ZENAME3
zename3_008(040),
data element: ZEDEPID
zedepid_009(004),
data element:
zsalkey_010(005),
data element:
salary_011(013),
data element: ZENAME3
ZENAME3_008(040),
data element: ZEDEPID
ZEDEPID_009(004),
data element:
ZSALKEY_010(005),
data element:
SALARY_011(013),
end of record.
End generated data section ***
start-of-selection.
at selection-screen on value-request for p_file.
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
DEF_PATH = ' '
mask = '.,..'
mode = 'O' " O -- open, S -- Save.
title = 'OPEN'
importing
filename = p_file
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
start-of-selection.
call function 'UPLOAD'
exporting
CODEPAGE = ' '
filename = p_file
filetype = 'DAT'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
tables
data_tab = record
exceptions
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
others = 7
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*perform open_dataset using dataset.
*perform open_group.
delete record index 1.
loop at record.
*read dataset dataset into record.
*if sy-subrc <> 0. exit. endif.
perform bdc_dynpro using 'SAPMSVMA' '0100'.
perform bdc_field using 'BDC_CURSOR'
'VIEWNAME'.
perform bdc_field using 'BDC_OKCODE'
'=UPD'.
perform bdc_field using 'VIEWNAME'
record-viewname_001.
perform bdc_field using 'VIMDYNFLDS-LTD_DTA_NO'
record-ltd_dta_no_002.
perform bdc_dynpro using 'SAPLZSHAP' '0001'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field using 'BDC_OKCODE'
'=NEWL'.
perform bdc_dynpro using 'SAPLZSHAP' '0002'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-SALARY'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'ZEMPTAB1-ZEMPID3'
record-zempid3_003.
perform bdc_field using 'ZEMPTAB1-ZENAME3'
record-zename3_008.
perform bdc_field using 'ZEMPTAB1-ZEDEPID'
record-zedepid_009.
perform bdc_field using 'ZEMPTAB1-ZSALKEY'
record-zsalkey_010.
perform bdc_field using 'ZEMPTAB1-SALARY'
record-salary_011.
perform bdc_dynpro using 'SAPLZSHAP' '0002'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZENAME3'.
perform bdc_field using 'BDC_OKCODE'
'=UEBE'.
perform bdc_field using 'ZEMPTAB1-ZENAME3'
record-zename3_008.
perform bdc_field using 'ZEMPTAB1-ZEDEPID'
record-zedepid_009.
perform bdc_field using 'ZEMPTAB1-ZSALKEY'
record-zsalkey_010.
perform bdc_field using 'ZEMPTAB1-SALARY'
record-salary_011.
perform bdc_dynpro using 'SAPLZSHAP' '0001'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_dynpro using 'SAPLZSHAP' '0001'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_dynpro using 'SAPMSVMA' '0100'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VIEWNAME'.
perform bdc_transaction using 'SM30'.
*enddo.
*perform close_group.
*perform close_dataset using dataset.
endloop.
loop at it_err.
write : / it_err-msg.
endloop.
form error.
call function 'FORMAT_MESSAGE'
exporting
id = sy-msgid
lang = '-D'
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
importing
msg = mess
exceptions
not_found = 1
others = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
it_err-msg = mess.
append it_err.
clear it_err.
endform.
If it is session method u can find the session in SM35 from where u can get the error log.
Hope this helps u,
Regards,
Arunsri -
Any way to batch gradual exposure change?
I make time lapses and there is a very common frustration where flicker is created by small exposure changes due to the aperture blades not falling in the same position or when using an auto mode where exposure changes and the camera changes exposure values. To problem is worsened when doing a time lapse during sunset/sunrise when one expects the exposure to change drastically but needs to compensate in order to get the entire scene.
I've experimented with using Lightroom's "Match Total Exposures" feature which is great at adjusting the exposure to even out the discrepancies between changing exposure values. But this doesn't take into account the exposure of the scene is expected to change. So when doing this for a sunset, as I increase the shutter speed to account for the setting sun, Match Total Exposures adds negative EV because it recognizes the longer shutter speed would be over exposing the selected "correct" photograph.
I would very much like to find a way to use the Match Total Exposures feature to first even out the exposure changes from the changing parameters, and then apply a batch gradual exposure change to the series so that it will know to allow for these changing lighting conditions.
Lightroom is great for adjusting individual photos or for a series under the same lighting conditions using (sync settings and match total exposures) but with changing lighting conditions is would be great to have the ability to gradually adjust values, not just exposure but other tone values.You can probably fairly easily modify the script here.
-
Someone PLEASE help me! I cant figure out what is going on with my computer. I don't install anything weird, but my brother does. He's very good at computer tech stuff and is in I.T, but I cant help but blame him for all the problems my Mac is having. Nothing works like it should. My safari will randomally crash, my screen will randomally turn back, my iphoto will crash during uploading from my iPhone, I cant highlight anything, I can't drag anything. When I want to click on something, I have to click over and over again just for it to even register. I know everything is up to date and recently reset my PRAM. I'm running Lion and have a lot of room on my hardrive. I have an external harddrive and I'm wondering if I should just move all of my important files over to it and completly wipe out my computer's hardrive and start from scratch.
Some folks can't leave well enough alone, and insist on downloading all sorts of additional "stuff" that ends up making their Mac unstable.
Standard Mac OS X on properly-operating Hardware does not crash, unless you start installing too many add-ons.
You can run "just the basics" by holding down the Shift key at Startup. This does one pass of Disk Repair, then loads a minimal set of extensions, and comes up in Safe Mode. If it works OK that way, but crashes in "regular", it's the add-ons.
There ia another layer of add-on junk that can be added to Safari. If the only remaining problem is Safari crashing, those add-ons can be disabled as well. -
Hi,
I am facing the below mentioned error while executing a report on the web with a Variable :-
The status of "QUERY_VIEW_DATA_PROVIDER" "DP_1" may only change during command processing
(The report was run on web with a recently configured portal)
Code for Variable Exit :-
WHEN 'ZZVAR_YS'. "Yesterday
CASE P_STEP.
WHEN 1.
"Pre Processing
clear l_s_range.
clear lv_date.
lv_date = sy-datum - 1.
l_s_range-opt = 'EQ'.
l_s_range-sign = 'I'.
l_s_range-low = lv_date.
append l_s_range to p_t_range.
WHEN 2.
"No After Processing
ENDCASE.
Variable Characteristics at reporting End :
1. Optional
2. Not ready for Input
3. Single value
4. Customer exit Variable
Pointers will be of immense help.
Thanks & Regards,
RahulThanks,
That was some useful information.
Solved using dynamic assignment of Data provider.
Regards,
Rahul R Nair -
Smooth jerky exposure changes in Premiere Elements 13
Folks - can anyone tell me how to smooth jerky exposure changes caused by the automatic camera settings (temporal smoothing) over a video clip? (Can't seem to find the temporal setting in Premiere Elements 13).
AndyD74
Thanks for the follow up replies.
Your Edit Menu/Project Settings/General readings suggest that you or the project have not set the correct project preset for the project. If the Canon is the major source of your Timeline content, then the project should not be 1080i (the project's default). It should be
NTSC
DSLR
1080p
DSLR [email protected]
You are going to have to go to a new project to correct that situation. You cannot change the project preset in 13/13.1 once the project preset has been established.
If the project (automatically) is not giving you the correct project preset, then you need to set it yourself (manually) before you import the source media.
File Menu/New/Project and Change Settings
In Change Settings, set for the project preset mentioned above. OK out of there.
In the New Project dialog that appears, rename the project and make sure there is a check mark next to "Force Selected Project Setting on This Project". OK out of there.
Then in the workspace, import your source media with Add Media/
Another factor is the custom made intro that I created in Aurora3d Title Animation. What are its properties and how do they compare with those of the Canon's 1080p29.97. If you remove the Title Animation from the Timeline, do the problems disappear even with the DSLR project preset pointed to?
Please review and consider.
Thank you.
ATR -
How To... Update Master Data during upload of transaction data
Can anybody let me know how this can be achieved.
I have datasource (Legacy not R3) where I am getting both master data and text for number of infoobjects.
I dont want separate datasources.
The datasource is actually transactional datasource.
I dont need text in the cubes or DSO I need the text tables of the infoobjects to be updated.
I could find this on SDN but do anyone have document based on the below link.I was not able to find it.
How To... Update Master Data during upload of transaction data
Thanks.Dear Praveen
I guess yr req is demanding the knowledge of Data Unification and Synchronization whose scope is a bit outer the area of BW.( its MDM actually )
In BW we could very well fetch data out of different data sources (even across the different system) with no issues so why not u trying that. if there is any issue implementing that then please specify what kind of trouble you are interfacing...
I got the below link which may be helpful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bd6389-0a01-0010-eb95-d45835d446a8 -
When making a photo book, my iPhoto freezes during uploading the book to the storey. I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large image files, but I don't want to reduce the image file size and compromise quality in the book. How can I get past this?
My macbook air is os x 10.9, using iPhoto 11 9.5 (902.7).Try Old Toad's solution here: See Re: iphoto : upload impossible to print a book
Try to boot into Safe Mode and order this way, or sign into a different user account and try to order as a different user.
Léonie -
I have previewed my book but after cliking BUY BOOK it compiles it OK but then it always states an error after of during uploading it to the store.
How can I rectify this?I have previewed my book but after cliking BUY BOOK it compiles it OK but then it always states an error after of during uploading it to the store.
How can I rectify this?
Maybe you are looking for
-
I have a new PC and want to import my 'favorite website info', in the dutch version called 'Bladwijzers', into the new version of Firefox on my new PC. Do I copy the old places.sqlite to the uohyzr7h.default directory to replace the existing? Or is t
-
Hello, In a full table scan I understand that the memory block used for a newly read table block is placed at the end of the LRU. When the second table block is read, is the same memory block replaced? What I am asking basically is whether for a full
-
ITunes 5.0.2 update?!!?!?
I just got a message when I launched my copy of iTunes 5.0.1 saying that version 5.0.2 is available for download. But when I got to the iTunes download site, there's nothing there...well, nothing indicating that 5.0.2 is out. Did anybody else receive
-
I'm using Firefox 4.0.1, but can't install addons for my version.
Addons' center points that I'm using 3.6.10 version. [http://pix.am/REY0.png Screenshot]
-
Please explain about LAST_OPERATION_FAILED
Hi all, Please explain about the parameter LAST_OPERATION_FAILED. and if I found this warning message in DB16 what is the procedure or actions we need to take? Thanks&Regards, Prakash