Exposure control errors when recording videos with...

I noticed that when I record videos, the exposure sometimes is not adjusted properly. If lighting conditions change, exposure remains at the same level, and records became over or underexposed. This is especially noticeable outdoors.
I have a few minutes long sample recording where the recording starts normally, then as light conditions change, (I slowly move from a shady area to a lit area) exposure gradually degrades to a point where most of the recording "burns out" due to extreme overexposure ( about 80% of the picture is white). 
What confuses me is when I tried to reproduce this problem (albeit it different lighting conditions), exposure control worked pretty good.
I wonder if these exposure problems are due to a bug, hardware problem or a device limitation.
Do you have any tips to get better recordings with the phone?
Nokia Lumia 520 3046.0000.1329.2001 RM-914
Nokia Asha 302 V15.09 22-05-13 RM-813

The phone runs the latest firmware (3.36) available currently. There are no  image-related  changes mentioned in the 3.36 changelog though.
Nokia Lumia 520 3046.0000.1329.2001 RM-914
Nokia Asha 302 V15.09 22-05-13 RM-813

Similar Messages

  • No sound when recording videos with iphone 4s - ios7

    Since I have downloaded ios7 to my iphone 4s I am no longer getting any sounds when recording videos. When looking back at past videos I have recorded, they still have sound in the playback. I have tried resetting my phone and reseting it to factory settings. Any recommendations?

    Hey Bryan3939!
    If I'm reading this correctly, it sounds like you might be experiencing an issue with your microphone recording during videos. I have an article for you that can help you troubleshoot this issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Problem Recording Sound when Recording Video with iSight

    I am trying to make a short movie using iMovie '08 (ver. 7.1.4) with my built-in iSight camera and built-in mic on my iMac (2.16 GHz Intel Core 2 Duo). I want to post this short movie in my MobileMe gallery.
    I am able to record and view the video (event) using the iSight camera. However, I cannot get the movie (as I record the video) to pick up any sound.
    The mic appears to be working okay: when I click on the microphone icon in iMovie, a "VOICEOVER" window appears. In this window, the "Record From" box shows "Built-in Microphone" selected and the Left/Right bars below shows green increasing/decreasing as I speak.
    Nevertheless, I cannot get iMovie to record any sound. Obviously, I am missing some setting or process. Would someone kindly give me a little direction here? Thank you, Dale

    The mic wasn't selected in the System Preferences. In the Sound pane, the "Line In" had been selected. Instead, the "Internal microphone" should have been selected. When I made this change, the mic worked fine. Dale

  • Does the Z1 have manual exposure adjustment when recording videos?

    Looked all over the internet but can't find an answer to this question. When recording videos with the Z1, is it possible to manually increase the exposure by way of a slider (usually a range of -2 to +2)? I know there's an option to choose spot/centre weighted etc, but can this variable by set in advance with a slider? I film a lot of indoor videos that often end up completely underexposed when left in auto mode, therefore manual override is a must for me.
    If not, does anyone know of any third party camera apps that add this functionality?
    Solved!
    Go to Solution.

    On mine, running Android 4.4.2, before recording I can do it using the row of icons on the left. Make sure 'SCN' in the top left corner ('scene', in other words) is set to 'off'. This is like selecting 'manual' rather than one of the automatic, scene dependant, modes and it opens up the use of the next settings icon below it, the one that looks like 3 sliders, which would otherwise be 'greyed out'. So now that it's white you can tap it, go in, and manually select your 'white balance' setting (I use 'auto') and also the slider that you mentioned that goes from +2 to - 2. The slider in this case is labelled as 'EV'. Did this help?

  • Error when opening document with ECL control: INVALID_DATA

    Hi Gurus,
    I've tried to search the net for this problem but could not find anything and I'm stuck now.
    Description:
    we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
    when we try to open this document, time-to-time we get following error:
    Error when opening document with ECL control: INVALID_DATA
    Message no. SDV004
    by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
    what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
    It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
    Thanks,
    David

    Hi Christoph,
    thanks for tip, unfortunately this was already flagged, currently settings are:
    for Display Settings:
    yes - include ECL control
    use HTML control
    empty - maximum viewer wait time
    (do you think that setting some value for this could help)
    yes - deactivate generic object services in viewer
    no - doc display as dialog box
    yes - deactivate data provider cache
    Storage Settings:
    yes - always copy document class from document type
    yes - permit multiple assignment
    Thanks,
    David

  • SAP DMS : Error when opening document with ECL control: INVALID_DATA

    We are receiving following error while try to view .FAX file through SAP Document viewer
    "2D viewer - Unable to opend Document"
    "Error when opening document with ECL control: INVALID_DATA"
    Appreciate your quick effort.
    Thanks,
    Sam.

    Yes, We have checked in both ways, I have also followed other threads on the same issue
    But not able to find the solution for the issue. We are facing the issue when we are using files scannned by Kodak Scanner i1420 in tiff format.
    But If I will attach any other tiff files from directory then It can viewed through SAP Document Viewer.
    I appreaciate your help in this regards.
    Thanks,
    Sam,

  • How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

    How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo  and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no  effects is going thru?

    Hi Life93,
    What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
    See this thread on how to remove the audio from a clip in iMovie -
    Is there a way to separate audio from a video c...
    https://discussions.apple.com/thread/1779767
    To add audio from GarageBand use this article -
    iMovie '11: Add a sound clip to your project
    http://support.apple.com/kb/PH2255
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My speaker does not pick up sound when i video with my iphone or use the speaker,  yet the voice recorder works?

    my speaker does not pick up sound when i video with my iphone or use the speaker,  yet the voice recorder works? any ideas why? thanks

    Speakers have never picked up sound.
    Microphones record sound.

  • Record video with built in iSight?

    My friend just got a new MacBook and we can't figure out if you can record video with the built in iSight. I know you can take pictures with Photo Booth, and from my research you can record video with the external iSight through iMovie. I figured you woud be able to do the same with the built in iSight, but when I open iMovie, it does not detect a camera. Can you not record video with the built in iSight or am I doing something wrong?
    MacBook   Mac OS X (10.4)  

    When you open iMovie look at the switch under the screen. You will see a camera on the left of the switch and scissors on left. Flip the switch to the camera and the built in camera should come on. Then on the screen it will say record with isight. That starts the record.

  • Can you use midi sounds when recording videos on Photobooth?

    Can you use midi sounds when recording videos on Photobooth?
    Basically, i like to record videos of me singing and playing guitar or keyboard, but to get a good sound for the keyboard I'd like to be able to record the audio using MIDI sounds...
    Ive got Logic, I've got M-Audio Fast Track Pro, into which i have my mic, guitar, and keyboard midi plaugged into. I can use it to record the mic and guitar on photobooth as they are audio inputs, however i can't use the midi sounds on the keyboard :/ I have tried having logic open with the desired MIDI sound selected whilst recording but it doesnt work...
    Is there ANY way this is possible?
    HELP PLEASE!
    Thanks!

    I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

  • No sound was recorded when recording videos on iPhone 4

    Hi, my iPhone can't record sound when recording video, but the voice memo app still works fine. Any ideas?
    (It plays some "weeeee" sounds insteaad)

    Thanks for your reply . I've removed the cover when doing both tests I mentioned. The earphone I used is at good condition and I don't see any problem with it. I've also reinstalled the iOS as your instruction, but still no luck, the video sound still has noise.
    I've decided to export the video file to my PC to see if I can hear sound better or not, as it's hard to hear and sound except noise with the external speaker on my iPhone even at maximum volume. On my PC I had to increased playback volume to 100%, set volume booster to 300% and applied noise reduction plugin (I use Media Player Classic on Windows 7) to get an acceptable sound (still noise but better than the original). If I don't boost the volume, it's hard to hear anything. I don't expect it to be crystal clear like the voice memo (using the bottom mic), but too much noise like this is really bad.
    So I think it appears to be a hardware-related problem. I will later consider to send it to a phone repair shop or keep it and accept this bad video sound problem . In Vietnam we just have Apple authorized resellers but don't have any official Apple repair shops, that's why I'm still confused as I don't really trust those phone repair shops to handle my iPhone. Anyway, thanks again for your comment .
    P.S: it maybe a little off-topic, but do you know any video recording app that using the bottom mic ?

  • No sound when recording videos iphone4

    Hello,
    When i record videos with my Iphone 4 there is no sound when i read them and, when i try to use the speaker during calls my correspondants don't hear me.
    Any clue about this ?
    Thanks

    Hello Kboum,
    It sounds like the microphone on your phone is not functioning correctly in either the Camera app or the Phone app. I recommend the troubleshooting for it in the article named:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
    Make sure none of the microphones is obstructed by dirt or debris.
    Turn the iPhone off and then on.
    Make sure that the latest version of iOS is installed.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • No sound when recording videos

    Hi,
    I m facing problem with my lumia 820, it's not recording sound with videos. When video is played, it gives buzzing sound. Its similar for any App which uses MIC for sound recording....
    Any help.

    Hi, TejinderPS. Did something happen to your Lumia 820 before this audio issue came up? Do you also experience the same thing during calls? Are you being heard by the person you're speaking with?
    If your phone has a body cover that might block the microphone, try removing it and see if the you'll be able to record videos with clear audio quality. You can also try rebooting your phone by simultaneously pressing and holding the volume down and power keys until it vibrates and restarts. 
    Let us know how it will go. BTW, congratulations on your first post! 

  • Recording videos with N95

    Hello.
    I have recently purchased the Nokia N95 and am having some troubles with audio when recording videos.
    When the sound is loud it 'crackles' during playback. This isn't because of the phone's speakers, as the crackling also occurs when I play the videos back via television or when playing the .mp4 files on the computer.
    It would seem the problem is occurring when the audio is being recorded. Is there a way to decrease the sensitivity of the microphone that records the audio? If not, where is that microphone located so that I can try covering it to reduce the level of sound reaching the microphone.
    Thanks in advance for any help!

    The microphone is the same microphone used for voice. The opening hole is next to the charging connector on the bottom of the phone.
    One way to improve this is to use the remote. When you have the Remote connected then the microphone in the remote will be used.
    If someone would be clever enough they can develop a microphone that can be plugged into the 3.5mm jack of the N95 for better video recording.
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • Can i zoom in when recording video on ipad

    How do i zoom in when recording video on an ipad. I am aware of the 3 finger tap to zoom in when watching video but it is the recording of video that i am interested in. If not is there an app to facilitate this?
    Many thanks

    Well, not directly. With iMovie you can zoom in afterwards, but that is expensive. I am annoyed that it cannot, but to take a regular picture you can do that perfectly.vjust pinch the screen, and it will zoom on camera.

Maybe you are looking for

  • Can I install BOE XI r2 on a CE 10 Server (not upgrade)?

    Greetings! I have recently inherited responsibility of getting all our customers upgraded to BOE XI from CE 10. I am finding that if you attempt to install BOE XI R2 on the server that currently has CE 10, you have no choice but to upgrade. Upgrading

  • Instead of forwarding ports on my T.C. ....

    Hello everyone, I 've never done this before so please kindly bear with me... I want to download a torrent file from a P2P server, and i've read and heard i can't do this unless I open a port in my TC so that the download can get through. However, i

  • Can we Write off an AUC

    I have created an asset as AUC and I incurred some expenditure on it........later management wants to write off that asset, can we do this.............if yes what woul d be the entry passes in sap..........

  • Just checking in, any progress on the bugs?

    Specifically the midi driver conflict that seems to plague Mainstage unless I turn on my Ultralight, Axon 50 in that order after starting Mainstage. I also tried to use Omnisphere in Mainstage to no avail. It simply doesn't see any midi coming in. Ma

  • Account posting keys involves for process of third party order

    hi     pls tell me the process of third party order and whos account stock will be debited and tell me the account posting keys involves in this process and how it operates regards Ram Edited by: Ian Wong on Aug 13, 2008 7:06 PM