Exposure management missing

in my spro/ hedge management, there is no item called settings for exposure management, where is it?

check below path:
Transaction Manager > General Settings > Hedge Management > Settings for Exposure Management

Similar Messages

Exposure Management in ECC6

I want implement exposure & hedge management in ECC6. Can anybody provide me steps about exposure management in ECC6.Means fromexposure creation to transfer of exposure to hedge management. What happens when versioned exposure is created ?

Hi,
Thanks for your replies.
You have clarified the following in another thread
Q:Can you please clarify whether IS-PS is same as EA-PS since in ECC6 under IMG-Activate ECC extensions, I do not see IS-PS.
Your Reply:
Make sure that you enter EA-PS* in the field "BC Set ID" and you'll find proper BC Sets with "BC Set description" Enterprise IS-PS*
"BC Set ID" "BC Set description"
EA-PS-MENU Enterprise IS-PS Switch for Menu
EA-PS-IMG Enterprise IS-PS Switch for IMG
EA-PS-AKH Enterprise IS-PS Switch for ACH
I would like to know whether I need to activate all three and what does ACH stands for.
Thanks
SS

Exposure Management

Hello all,
I would like to ask if there is any possible way to "feed" exposure management with data from open vendor invoices in foreign currency (FI/AP) or open purchase orders (MM). I would like to use this information for hedging foreign currency exposures.
Thank you in advance.

Hi,
My understanding is this is possible using BADIs in Exposure Management 2.0 (available from EhP4).
General Settings
Hedge Management
Settings for Exposure Management 2.0 : complete IMG settings under this path
Business Add-Ins (BAdIs) for Exposure Management: implement/use appropriate BADIs here
Manish

Credit exposure is missing after billing doc

Hi all
i maintain $ 20000 Credit limited in FD32 and i raised few sales order , delivery ,billing accounting document not clear when i check in FBL5N customer line balances it showing due as $ 25000 when i check in FD32 credit exposer is taking in to consideration it showing credit exposure is 0 and credit limited is used 0 percentage and Receivables also 0 when i go to A R Summary its showing open item correctly $ 25000 , Receivables also 0
again i raised two more sales order and for one sales document i created delivery document but i not credited billing document then i check in FD32 not it showing credit exposure value and credit limited used percentage 25.15
the movement i bill the delivery document system is not consideration credit exposure and I have one open sales document for that only it showing credit exposure around 13 percent
the problem is that once i bill the document system is not consideration as credit exposure
Could U any one guide where i missing
thanks and regards
rajesh
Edited by: RAJESH KUMAR on Dec 31, 2008 11:46 PM
Edited by: RAJESH KUMAR on Dec 31, 2008 11:58 PM

Hallo,
As I remember, You must to check update of SIS reporting for credit limit - It's SO66 structure, I guess where You have to change for daily update.
Kind Regards
Lukasz

File manager missing in Ovi suite

I just bought E7-00 after my E90 and I was really surprised that file manager was missing in Ovi suite. This means I cannot transfer single files between PC and mobile phone. Difficult to use backup copies are not enough. Fortunately file manager still exists in old familiar PC suite, which works with E7-00 in spite of that Nokia says it is not meant for this device. I consider it stupid that I have to jump between two suites. It takes much time in vain. I wait that the next version of Ovi suite works better. Please, don't say that file manager is not needed!

@thecat2
Could you please confirm what type of sms are not getting synced?
1. Operator SMS/ MMS?
2. sms from any particular numbers
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

After Deploying an Image: Windows Boot Manager - Missing ACPI.sys

Hi,
I am currently working on deploying a Windows 7 Pro x64 image to a number of clients over our network using FOG. We used KVM in Ubuntu to build the base image. The image has a small virtual disk for the Windows installation and is deployed to clients with larger
drives. Prior to capture the image, we ran sysprep /generalize /shutdown /oobe /unattend:unattend.xml, then boot the VM to the FOG client and let FOG save off the disk image. We then deploy the image to clients over FOG.
FOG successfully copies the image over, then reboots the PC. The computer attempts to boot from the local hard drive, then fails at the Windows Boot Manager screen, saying:
Windows boot manager
Windows failed to start. A recent hardware or software change might be the cause....
File: \Windows\system32\drivers\ACPI.sys
Status: 0xc0000098
Info: Windows failed to load because a critical system driver is missing or corrupt.
I've updated the client's BIOS, tried a different hard drive, used ATA secure erase to wipe the drive before formatting, and still encounter this same issue with certain client computers. Are there any other steps I can take to resolve this issue?
What files in Panther should I look at (or post) to troubleshoot? I don't see anything too obvious in diagerr, and sestuperr.log is just about empty.

We're using two models of 120GB SSDs, and deploying to 5 different motherboards (4 Intel models + 1 MSI model). The issue is most common with the DH55TC Intel boards.
We're using FOG due to budget limits--otherwise, WDT definitely would have been considered.

Security Manager Missing

Welcome,
I've installed Oracle 10g EE on Win XP and Enterprise Security MAnager is missing. I don't have esm.bat. How can I install ESM. Enterprise Manager works fine. I did not installed Internet Directory nor Single Sign On. Is that a problem?
Thank You,
Peter

Enterprise Security Manager won't be found as an executable or batch script as you pretend. You have to install the administrative client and invoke this as:
oemapp esm
Enterprise security manager is a component launched with the Oracle Enterprise Manager Java console infrastructure.
For a demo on esm you may want to read this Oracle By Example article: Enterprise User Security.
~ Madrid

Keep getting application Manager missing or damaged error when opening application

Application missing or damaged error when opening application.
Tried CC cleaner
Tried uninstalling and reinstalling
Tried Short file name
Tried AAM patch
Tried installing Creative Cloud
Just plain frustrated not getting this software to work.

What version of Premiere Elements is involved?
Premiere 12
And, on what computer operating system is it installed?
Windows 8
What are you doing when you get this message about the Adobe Application Manager?
Opening the application (Premiere)
Have you tried in install the Adobe Application Manager from the following link?
for Windows
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
for Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Yes
               Tried CC cleaner
               Tried uninstalling and reinstalling
               Tried Short file name
               Tried AAM patch
               Tried installing Creative Cloud
     Thank you for the assistance.

HP Pavilion dv7-6c66nr - Win 7 HP 64 bits - Boot manager missing

I have a HP Pavilion dv7 with Win 7 Home Premium edition pre-installed, it is a 3.5 years old computer, seldom used by me. As my previous computer with XP was close to the end of is life I decided to investigate if it was possible to use the Pavilion.
I intend to have the Pavilion with the windows 7 sp1 and HP drivers, so at startup I pressed f11 to enter HP Recover Manager, chose “Minimized Image Recover” and the software installed the intended image
With windows 7 sp1 installed I install all windows updates till two days ago and also an handful of HP drivers updates
Then I made 1 bootable CD windows recover disk with windows, and 1 system image windows also, that I save to a usb hd drive
Everything was going ok but the cyberlink software could not connect with the computer embedded camera. I took several steps to solve the problem and it seems that the camera was not connected (hard disconnected).
I was not sure if before the minimized installation the webcam was operating well and once more I used HP “Recover Manager” to return to the full installation
As the web camera was not operating even with the full installation, I decided to return to the streamlined installation.
I tried a short cut to the original process, and instead of going to the HP Recover Manager and a once more update of windows and HP drivers I tried to use my previous produced system image with windows, so I went to Control Panel and used windows recover from the image, copying all to the same place (I was prompt to replace a lot of existing files). At the end of the process a received a message about same errors generated by the process but I do not investigated at that time.
When I reboot the PC I have a “BOOTMGR is missing/ Press Ctrl+Alt+Del” message and a blinking prompt
Now if I attempt Recover Manager to do a “minimized image recover” I receive an 0xEFFFFF08 error code and if I tried the full image after a rather short time it announces that the 1st stage is finished and it goes boot to proceed with the second half of the process, it goes off and reboot with the “BOOTMGR is missing/ Press Ctrl+Alt+Del” message and a blinking prompt
Can anyone helps me? I have no HP recover disks (it seems that HP do not sell rescue disks anymore for pavilion dv7 and Win7)
Happy 2015 for all

Create a System Repair Disk on another Windows 7 computer to use your computer if it fixes anything.
If you live in the USA/Canada, call HP at this number 1-800-334-5144, and see if you can still get a set of recovery disks otherwise the WorldWide site:
http://welcome.hp.com/country/w1/en/support.html
If the recovery disks are not available through HP, they have them at Computer Surgeons:
http://www.computersurgeons.com/p-20621-recovery-kit-679228-002-for-hp-pavilion-entertainment-notebo...
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Identity Management missing EP6

Dear Experts,
I have newly installed EP6 . Here Identity Management is missing (not showing ) in user administration tab.
Pl. advice .

Dear Sonal,
In EP6.0 ,in useradmin role identiry management is not there. In ep 7.0 only identity management is there .
Useradmin role is diffrent in EP 6.0 and 7.0 . BUt u can get all features.
Surekha.

Corrupt Boot Manager / Missing Windows 8 Pro

Please assist with the following as I have read too many forums and attempted to resolve without success.
Problem: unable to boot into Windows 8.0 due to corrupt boot manager or missing boot manager.
Observed: Harddisk is recognized within bios. The disk cable is firmly connected. I hear the disk spinning. Bootrec commands have completed successfully.
Attempted to resolve by:
1. Bootrec commands (but will still will not boot).
2. Factory disk repair command
3. Ran chkdsk commands (there was some clusters that need to be reorganized).
My primary concern is that I need to access my data on the drive. Is there a file that I can download and install that will act as my new boot manager? Or how can I access the drive? Pulling it of the computer and installing in an HD dock
seemingly will not work because I need the bootmanger fixed?
Please advise. Many thanks,

Hi,
Firstly, I need to confirm your system edition, as you said unable to boot into Windows 8.0 but your provide this problem at Windows 7 forum.
About bootrec command to fix the boot manager problem, I would like to suggest you refer to the KB again and try its process for test.
Use Bootrec.exe in the Windows RE to troubleshoot startup issues:
http://support.microsoft.com/kb/927392
If no use, please try to boot system into repair mode and using Startup Repair to fix system startup problem.
Roger Lu
TechNet Community Support

Workgroup Manager missing users running on 10.6.7 client

Strange issue I am coming across while running the most current version of Workgroup Manager (I just downloaded it again to make sure) on a Mac Os X 10.6.7 client! -> I notice that I am missing a lot of users when I log in and the application opens. I have already deleted the corresponding workgroup manager .plist (user/library/preferences) as well but this does not do much other than asking me to enter server and username/password again
Oddly enough ALL the accounts that are "missing" tend to be lower 3digit User ID's only... in fact the ONLY 3digit id that is showing up is my admin account.
Here's the really ODD part - Workgroup manager is only doing this when it is running on a 10.6 client mac! I am running the IDENTICAL version on a 10.5.8 client, logging into the same server, and ALL the missing users magically appear. Using the same server name, same login, same password - So I am pretty sure this issue is only due to some sort of glitch in how Workgroup manager is running on 10.6( my ver is 10.6.7)
AND of course the "missing" user names are still functioning perfectly well w/ clients receiving emails, logging in to folders etc. etc.
I cannot imagine that I am the only person having this issue, and am wondering if Apple or someone else can please give me some guidance as to the source of this problem and hopefully a bug fix / resolution of the same as I don't want to have to downgrade from 10.6 > 10.5 in order to perform user administration on my server (Server is also 10.6.7)
Thanks in advance for your help

You many not know how to do it now, but you will if you follow the instructions in the link. Or you can simply remove the original Home folder you configured in Setup Assistant while logged into the one you migrated. Then re-migrate your Home folder which will now take on the original account username. Then log into the newly migrated Home folder and delete the other one.

Following migration apps do not open. Adobe Application Manager missing or damaged

Any one know why I get the message below after I bought new iMac and migrated everything to the new machine via time machine backup?
none of my cc apps open. they all trow this error. redownloading and installing CC desktop does not help.
"Adobe Application Manager, required to resolve this problem, is missing or damaged.
Please download a new copy of Adobe Application Manager from
http://www.adobe.com/go/applicationmanager."

Mac migration (or Time Machine) do not work with Cloud program activations due to hidden files
Sign out of your account... Uninstall... run the Cleaner...
-Restart your computer... Sing in to your account... Reinstall
-using the cleaner after uninstalling and before reinstalling may help
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Booting manager missing

HELLO SIRDURRING SYSTEM FORMATING MY DVD DID NOT WORKED AND DUE TO SOME FAULTS ,MY NOTE BOOK IS SHOWING AT START UP ie boot manager is missing .i have tried all options of my boot orders but it doesnt work .i think my dvd drive is also not working .please help me to recover my system either by command promt or usb options ,please hel mereagards

Restart the recovery again.

Help please HP pavillion DV6 boot manager missing : (

Hi
I had a trojen I quarantined it but my laptop was not running ok I kept losing connection it was slow etc ... anyway I decided to do a full system recovery I done disc one that run ok ..then entered the 2 nd disc waited over 30 minutes it didnt run I took it out ...maybe i shouldnt of .. now I cant do anything with my laptop it sais boot manger is missing... I ran the memory tests ,hard disc tests they were all ok .... I got to the boot device bit ....it sais ebable i done that on all ... out of desperaration it kept saying if theres an exclamation mark ..it wont save ???? i cant fet rid ofthe exclamation marks .... when i i save after hiting F10 as advised ?? nothing works im just letf with my lovely laptop with a black screen saying boot manager is missing is there anyone out that can help /advise me please I just thought i would able to dowload a boot device manager from the HP webite ...no luck i cant find it or see any options for this ..please help if you can Im not technically clever so if you can help please explain in simple terms what i can do .... my laptop is HP pavilion DV6 the one im using now is my husbands
Thanks Kerry-anne I googled my problem & i hit F12 on restart now i have key system disable in a blue box with a key & a few numbers hi-lited in it please try & help me thanks im really desperate ...Im disabled & really need my laptop its my life line its the world from outside my bedroom : (

Hi Kerry
This seems to be an issue with software try to reinstall Operating system using the disc in case if still does not work please call HP Technical support and order a new set off Recovery disc as the second disc is not working this will resolve your issue.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Exposure management missing

Similar Messages

Maybe you are looking for