Express 34 cards with 2 eSata ports

Can anyone recommend an Express 34 cards with 2 eSata ports that works with SL? I have no access to my external drives until the new Sonnet Technology drivers come out in October. Any help would be appreciated.

Similar Messages

Does Sonnet Express Card 34 eSata Work with Lion?

I am looking to see if the Sonnet Express Card 34 eSata works with Lion OS

If your card is listed on the product site from Sonnet (e.g: http://www.sonnettech.com/product/tempo_sata_express34.html), you could get the answer by looking at the "Technical Specifications". Be sure that you're looking at the specifications of the correct card, since some seem to be compatible and some are not. Furthermore, if your card is based on the Silicon Image Sil3132 chip, it's (today) not supported. If there are any doubts left, try to connect Sonnet directly...

Satellite P300-220 (PSPCCE) and express card with firewire

I have problems with a shared IRQ between firewire (IEEE1394) connector and ati radeon 4600 mobility.(the IRQ used by both device is the 16)
This sharing make my firestudio presonus (sound card external via firewire) problems while reading music on my DAO.
I would like to buy an express card to solve this problem but i must be sure than it will not be the same IRQ (16) than the other firewire connection.
If you are using such a card please verify wich IRQ is used when it's connected on the laptop.
You can see it with the device manager.
Thanks a lot.
toskidus

Hi
The Windows OS controls and assigns automaticity all recourses to all controllers!
In my case the SD host controller and the graphic card shares the same IRQ 16 and there is NO conflict.
So I doubt that your issue is related to the same IRQ which is uses by graphic card and firewire.
Sorry but this is everything what I can suggest regarding your issue

X220i Express card with Fire Wire 400 adaptor

I'd like to know if there is a suitable Expresscard for the x220i that has a Fire Wire port. I already bought one but it didn't slot in properly although it does fit an older IBM laptop that I have. I need to download stuff from a video camera and don't want to buy the wrong thing again. Any suggestions would be appreciated.
Solved!
Go to Solution.

Hello,
My understanding is that the X220i (like my X220) has an ExpressCard/54 slot, that is, an ExpressCard slot which is 54mm wide. Any 54mm or 34mm wide ExpressCard should fit in there, but older 16-bit PCMCIA or 32-bit CardBus cards will not, as they have different connectors.
OWC, Rain Computers, SIIG, Sonnet, StarTech and SYBA all make FireWire ExpressCard adapters which should work fine with your X220i.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

[SOLVED] Express Card LPT not working/recognized.

Hi
Yesterday I bought an Express Card with LPT port (not pcmcia ). When I plug it in my laptop nothing happens, I mean there is no output in dmesg. Do I need special drivers or modules ? How to check if the system is seeing that something has been attached to the express card slot ?
Last edited by lgolebio (2009-10-24 14:41:25)

Problem solved :D, there was some dirt inside the Express Card slot, I cleaned it and know it works .

USB/eSata express card not working on stock kernel

Hello everyone,
I have a weird problem and I don't seem to find any solution by myself. Let me give you some background info on what I plan to do.
I purchased an express card to eSata/USB 3.0 adapter and want to make it work on my laptops. Precisely, it is this card: http://www.amazon.de/Notebook-Express-C … B007F8TXZ8
1: Lenovo X200s (1,6GHz) running Ubuntu 14.04 amd64
2: Lenovo X200s (1,6GHz) running Debian 7 amd64
3: Lenovo X200T (1,6GHz) running ArchLinux amd64
The card does work fine only on the Ubuntu machine. I would like to make it run on the two other ones as well. I thought I might get help here getting it to work on machine 3 and then transfer the results to machine 2. What really matters to me is eSata, btw, I do not even have a USB 3.0 device to test with.
First of all, here's what happens when I plug the card into machine 1:
user@1-ubuntu:~$ uname -r
3.13.0-39-generic
user@1-ubuntu:~$ dmesg | tail -n 44 # that's where it begins
[ 1953.576472] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
[ 1953.728077] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
[ 1953.728119] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1953.728304] pci 0000:05:00.0: PME# supported from D3hot
[ 1953.736062] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf0007fff 64bit]
[ 1953.736087] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 1953.736092] pcieport 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1953.736098] pcieport 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 1953.736104] pcieport 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 1953.736133] pci 0000:05:00.0: no hotplug settings from platform
[ 1953.736143] pci 0000:05:00.0: enabling device (0000 -> 0002)
[ 1953.736398] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.736406] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[ 1953.743621] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
[ 1953.743629] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 1953.743635] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[ 1953.743784] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 1953.743788] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.743791] usb usb9: Product: xHCI Host Controller
[ 1953.743794] usb usb9: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.743796] usb usb9: SerialNumber: 0000:05:00.0
[ 1953.743973] hub 9-0:1.0: USB hub found
[ 1953.743990] hub 9-0:1.0: 2 ports detected
[ 1953.744147] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.744153] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[ 1953.744218] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 1953.744221] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.744224] usb usb10: Product: xHCI Host Controller
[ 1953.744227] usb usb10: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.744229] usb usb10: SerialNumber: 0000:05:00.0
[ 1953.744366] hub 10-0:1.0: USB hub found
[ 1953.744383] hub 10-0:1.0: 2 ports detected
[ 1954.447851] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1954.460505] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 1954.461215] usb 10-1: New USB device found, idVendor=174c, idProduct=5106
[ 1954.461219] usb 10-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1954.461222] usb 10-1: Product: AS2105
[ 1954.461225] usb 10-1: Manufacturer: ASMedia
[ 1954.461228] usb 10-1: SerialNumber: 00000000000000000000
[ 1954.463146] usb-storage 10-1:1.0: USB Mass Storage device detected
[ 1954.463279] scsi7 : usb-storage 10-1:1.0
[ 1955.460385] scsi 7:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 5
[ 1955.465099] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 1955.466483] sd 7:0:0:0: [sdb] Attached SCSI removable disk
I wouldn't know of any attached disks, and neither does it show up. Note that it is only the card I plugged in, no hard drive attached to it.
hburg1234@packrehsel:~$ lspci -k
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo Device 20e0
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo Device 20e6
Kernel driver in use: mei_me
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
Subsystem: Lenovo Device 20ec
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo Device 20ee
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20f2
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20f5
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
Subsystem: Lenovo Device 20f8
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20f9
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
Subsystem: Intel Corporation WiFi Link 5100 AGN
Kernel driver in use: iwlwifi
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
Subsystem: Device 174c:2104
Kernel driver in use: xhci_hcd
The last one seems to be important to me, so here's a verbose output on that one.
user@1-ubuntu:~$ lspci -v | tail -n 8
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
Subsystem: Device 174c:2104
Physical Slot: 3
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at f0000000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
user@1-ubuntu:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
KERNEL[2585.956558] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0 (pci)
KERNEL[2585.972086] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9 (usb)
KERNEL[2585.972116] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9/9-0:1.0 (usb)
KERNEL[2585.975736] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10 (usb)
KERNEL[2585.975763] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-0:1.0 (usb)
KERNEL[2586.689218] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1 (usb)
KERNEL[2586.690935] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0 (usb)
KERNEL[2586.695723] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9 (scsi)
KERNEL[2586.695757] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[2587.692633] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0 (scsi)
KERNEL[2587.692667] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[2587.692691] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
KERNEL[2587.692708] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
KERNEL[2587.692824] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_generic/sg1 (scsi_generic)
KERNEL[2587.692898] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
KERNEL[2587.699636] add /devices/virtual/bdi/8:16 (bdi)
KERNEL[2587.699771] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.703694] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.709178] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
Apart from the supposedly found block device (can't judge) I am not sure if there is anything that is really eSata specific and not USB 3.0 related.
So far what I think I can tell from the output is that the modules
pciehp pci pcieport
seem to be dealing with the express card as such whereas
xhci_hcd
takes care of USB 3.0. I cannot see any clear reference to the eSata connector, which might not be surprising if the bus is just passed through (again: not sure).
For completeness' sake here comes the output of
user@1-ubuntu:~$ lsmod | tee before
Module Size Used by
ctr 13049 1
ccm 17773 1
pci_stub 12622 1
vboxpci 23194 0
vboxnetadp 25670 0
vboxnetflt 27613 0
vboxdrv 339502 3 vboxnetadp,vboxnetflt,vboxpci
cuse 13445 3
dm_crypt 23177 1
btusb 32412 0
cdc_ether 14351 0
usbnet 43913 1 cdc_ether
cdc_acm 28803 0
mii 13934 1 usbnet
cdc_wdm 19053 0
rfcomm 69160 8
bnep 19624 2
bluetooth 391136 22 bnep,btusb,rfcomm
binfmt_misc 17468 1
coretemp 13435 0
kvm_intel 143148 0
kvm 451729 1 kvm_intel
thinkpad_acpi 81013 0
nvram 14411 1 thinkpad_acpi
serio_raw 13462 0
arc4 12608 2
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_hda_codec_conexant 57441 1
iwldvm 232285 0
snd_hda_intel 56451 3
mac80211 630653 1 iwldvm
snd_hda_codec 192906 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
snd_rawmidi 30144 1 snd_seq_midi
lpc_ich 21080 0
iwlwifi 169932 1 iwldvm
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_pcm 102099 2 snd_hda_codec,snd_hda_intel
mei_me 18627 0
cfg80211 484040 3 iwlwifi,mac80211,iwldvm
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
mei 82276 1 mei_me
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 29482 2 snd_pcm,snd_seq
snd 69322 17 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,thinkpad_acpi,snd_seq_device,snd_seq_midi
soundcore 12680 1 snd
parport_pc 32701 0
ppdev 17671 0
mac_hid 13205 0
tp_smapi 28367 0
thinkpad_ec 14449 1 tp_smapi
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
i915 783961 2
psmouse 106714 0
ahci 25819 3
libahci 32716 1 ahci
i2c_algo_bit 13413 1 i915
e1000e 254433 0
drm_kms_helper 55071 1 i915
drm 303102 3 i915,drm_kms_helper
ptp 18933 1 e1000e
pps_core 19382 1 ptp
video 19476 1 i915
wmi 19177 0
and a list of the newly loaded modules:
user@1-ubuntu:~$ diff before <(lsmod)
1a2
> usb_storage 62209 0
Now, on my Arch machine the situation is as follows when the card is plugged in:
user@3-arch:~$ uname -r
3.17.2-1-ARCH
user@3-arch:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
user@3-arch:~$ lsmod
Module Size Used by
sr_mod 21903 0
cdrom 47479 1 sr_mod
hid_generic 12393 0
usbhid 48603 0
hid 102220 2 hid_generic,usbhid
cdc_ether 12564 0
usbnet 34978 1 cdc_ether
cdc_acm 30362 0
cdc_wdm 17427 0
mii 12675 1 usbnet
ctr 12927 0
ccm 17534 0
fuse 87410 3
joydev 17063 0
wacom_w8001 12706 0
serport 12842 1
mousedev 17272 0
iTCO_wdt 12831 0
iTCO_vendor_support 12649 1 iTCO_wdt
coretemp 12820 0
kvm 417429 0
pcspkr 12595 0
psmouse 107214 0
evdev 21544 20
mac_hid 12633 0
serio_raw 12849 0
i2c_i801 16965 0
snd_hda_codec_conexant 21835 1
snd_hda_codec_generic 63126 1 snd_hda_codec_conexant
arc4 12536 2
iwldvm 184847 0
mac80211 604456 1 iwldvm
i915 905750 2
lpc_ich 20768 0
iwlwifi 156837 1 iwldvm
snd_hda_intel 26387 0
snd_hda_controller 26938 1 snd_hda_intel
cfg80211 445286 3 iwlwifi,mac80211,iwldvm
thinkpad_acpi 69074 0
e1000e 215686 0
snd_hda_codec 108536 4 snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
drm_kms_helper 80934 1 i915
shpchp 35210 0
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88487 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
ptp 17692 1 e1000e
pps_core 17225 1 ptp
snd_timer 26614 1 snd_pcm
wmi 17339 0
drm 259106 4 i915,drm_kms_helper
nvram 13034 1 thinkpad_acpi
thermal 17559 0
snd 73436 8 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,thinkpad_acpi
soundcore 13031 2 snd,snd_hda_codec
led_class 12859 2 iwldvm,thinkpad_acpi
rfkill 18867 3 cfg80211,thinkpad_acpi
ac 12715 0
hwmon 12930 2 coretemp,thinkpad_acpi
acpi_cpufreq 17218 1
battery 17452 0
i2c_algo_bit 12744 1 i915
mei_me 17900 0
tpm_tis 17182 0
i2c_core 50152 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
tpm 31467 1 tpm_tis
mei 75079 1 mei_me
intel_agp 17432 0
intel_gtt 17848 3 i915,intel_agp
video 18043 1 i915
processor 27777 3 acpi_cpufreq
button 12953 1 i915
sch_fq_codel 17343 6
tp_smapi 27621 0
thinkpad_ec 12813 1 tp_smapi
ext4 497696 3
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 86417 1 ext4
sha256_ssse3 25692 2
sha256_generic 16804 1 sha256_ssse3
ecb 12737 0
cbc 12696 1
algif_skcipher 17051 0
af_alg 12988 1 algif_skcipher
dm_crypt 22551 1
dm_mod 93490 15 dm_crypt
sd_mod 44398 3
crct10dif_generic 12581 1
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 2 crct10dif_generic,crc_t10dif
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
ata_generic 12490 0
ahci 33291 2
libahci 27158 1 ahci
pata_acpi 12771 0
uhci_hcd 43507 0
ehci_pci 12512 0
ehci_hcd 69939 1 ehci_pci
libata 181518 4 ahci,pata_acpi,libahci,ata_generic
usbcore 199381 9 uhci_hcd,ehci_hcd,ehci_pci,usbhid,usbnet,cdc_acm,cdc_wdm,cdc_ether
usb_common 12440 1 usbcore
scsi_mod 147543 3 libata,sd_mod,sr_mod
i8042 18002 1 libps2
serio 18282 9 serio_raw,atkbd,i8042,serport,wacom_w8001,psmouse
Sticking to my suspicion that this might just be a USB related issue and eSata might still work due to some sort of passthrough, I attached the very eSata drive that I could mount on Ubuntu. It did not work.
I then researched and found this blog post: http://okomestudio.net/biboroku/?p=1360
So I downloaded the pkgbuild for the arch linux core kernel and checked the config. It matched the recommendations.
Another hint I found was to unload acpiphp and force-reload it. However, this tip does not seem to apply to the arch kernel:
[user@3-arch:~$ sudo rmmod acpiphp
rmmod: ERROR: Module acpiphp is builtin.
Anyone any idea on how to make the card work?
Thank you!
Last edited by archery1234 (2014-11-15 10:46:35)

For anyone else seeking help on that: Card slot was deactivated in 2/3 Bioses.

Ok, so now I need a new eSATA PCI Express Card for my Mac Pro

I have a Seagate eSata External Drive which comes with an eSATA PCI card.
The http://www.cwol.com/serial-ata/esata-pci-express-1-ext-1-int.htm site recommends this card: eSATA PCI Express Card - 1 eSATA II and 1 Internal SATA II Port, but it doesn't specify whether it works on a Mac Pro - any suggestions?
Mac Pro Quad Core 2.66 Mac OS X (10.4.6)

Hi
I think the Radeon 9800 is certainly the most powerful graphics card you could buy for your G4 and would do everything you need.
Just be aware there are at least 3 different Mac versions though.
There's a G5 version, the Radeon 9800 Pro Mac Special Edition, which is 8X AGP and has 256MB VRAM.
There's an older Radeon 9800 Pro Mac Edition, which is 2X/4X AGP and has 128MB VRAM.
Finally there's a newer Radeon 9800 Pro Mac Edition, which is 2X/4X AGP and has 256MB VRAM.
So long as you get one of the 2X/4X AGP versions, either with 128MB or 256MB VRAM, it should work fine.
It's perhaps also worthwhile mentioning they do require a separate internal power connection, although this can be taken from a hard drive molex power connector. Also they have a cooling fan which can be noisy.
I hope this helps.

Esata Express Card 34 for MacBook Pro 17 - Help

Hi ,
Can you you recommend Esata Express Card 34 2 port card that will work with my Mac Book Pro, OS 10.6 and WD My studio II harddrive.
At present the following brands and models do not work:
Sonnett Tempo Esata Express Pro
http://www.sonnettech.com/support/kb/kb.php?cat=375&expand=_a2&action=b404#b404
Griffin Esata Express Pro
Look forward to hearing from you.
Thank you
Richard

Has anyone used a SONNET Tempo™ SATA Pro ExpressCard/34 (Note I said "PRO" yes the expensive one) on a new MacBookPro with 4GB RAM running 10.5.8?
Hi,
I use the Sonnet Tempo Pro ExpressCard with the SeriTek/2EN2 enclosure and the Mid-2009 17" MacBook Pro (Mac OS X 10.5.8) with 4GB of memory. I have not experienced kernel panics with this configuration.
AMUG has just posted a FW800 review that also provides eSATA ExpressCard performance details. Look at the eSATA section in the Performance portion of the article for more information. The heading is: "How does an eSATA ExpressCard Compare?"
http://www.amug.org/amug-web/html/amug/reviews/articles/sonnet/pro-fw800/

Express card speed

Hi own probably the first MacBook Pro released (its a 15" with 1.83 gighz processor, 1 gig RAM) and I use it to run a portable Protools Digi002 unit. Currently I plug the audio interface (Digi002) into my glyph firewire 400 port and then plug the glyph to my MacbookPro with a Firewire400 cable. I am daisy chaining two devices into one. My MacbookPro has only one firewire 400 port. It all works, but it is a little slow.
My question is this. I hear there are adaptors to give me additional connectivity via Express Card. If I buy one with E-SATA will I get that transfer speed through the Express Card slot? Or should I buy an express card with Firewire 800? Can anyone recommend a good adaptor?
I'm hoping I will get better performance once I quit daisy chaining all my devices.
Thanks!
Gary

If you are going to go through the trouble, go with the eSata. Since you are planning on multiple drives you need to be sure to buy an Expresscard/34 with an eSata interface that supports a port multiplier and NCQ. There are several manufacturers and prices range quite a bit. Check out Other World Computing as they have good pricing. Their Apiotek card supports Macs along with RAID 0/1/5.
Also, if you want some real performance you will need to max out your RAM. I run 4GB on my MacBook Pro. It is a 2.4Ghz 17" model. The additional RAM makes a big difference. Another suggestion is to upgrade your internal hard drive. They have a number of new models out and you can run a 7200 RPM drive with up to 320GB of capacity inside a MacBook Pro.
Good luck!

Driverless eSata (NewerTech MAXPower 6G PCI eSATA Controller. 2 x eSATA ports)

Hello,
In my Mac Pro I have installed a NewerTech MAXPower 6G PCIe eSATA Controller. 2 x eSATA ports. This is to connect my external disk enclosure to the computer. The problem I am experiencing is that if the extermnal disk array is powered off during I boot my Mac or login to it after sleep - the external disks are not mounted. In order to get ones mounted to my Mac Pro I put my Mac to sleep, switch the external disk array on, wait until it boots and then wake up my Mac and login to the OS. Sometimes it requires more than one time to repeat it to get disks mounted.
Is there any way (terminal command, automator script etc...) to force a Mac to iniciate/activate or load drivers to the PCI eSATA Controller that I would be able to mount these disk without putting my Mac to sleep or taking any other special actions?
Thank you for your time.

I use The ARCTICROC 4T http://www.rocstor.com/products/arcticroc-4t.html
grep for MaxPower returns nothing.
grep for AHCI returns 4 lines
com.apple.iokit.IOAHCIFamily (2.0.7) <5 4 3 1>
com.apple.driver.AppleAHCIPort (2.2.0) <34 9 5 4 3 1>
com.apple.iokit.IOAHCISerialATAPI (2.0.1) <43 34 5 4 3 1>
com.apple.iokit.IOAHCIBlockStorage (2.0.1) <34 12 5 4 3 1>
It is realy strange that putting Mac to sleep and waking it up forces external eSATA discs to appear. Most probably it is related to enclosure behaviors as the NewerTechnology Voyager connected to the second same card's eSATA port does not require any magic moves or actions to get mounted if a disk is inserted in to it.
This problem annoys me ..... especially when it is related to Microsoft Office. During MS Office activation the external eSATA disks were connected and Office included it in it's hardware description for authorization. Therefore if I run some MS Office products when the eSATA disks are off, the Office requests for a key. If I enter an activation key and next tiome I run MS Office with disk connected it sees it as a different computer and requests for a key....&^%*&^%
I talked to Microsoft about the problem and they told that they know it and working on solution. However, I believe that this problem priority is very low on MSoft side as there are comparably small amount of users having similar problems.

IMac 27" with display-port pc

Hello all!
I'm thinking about buying a used iMac 27" with the following specs:
Intel Core 2 Duo
iMac10,1
3,06 GHz
4 GB
I'm guessing this is the late 2009 model?
I really want to use this as a monitor for a new desktop I'm building. My question is; will it work with every pc that has graphics card with display-port ?
Many thanks in advance!
Message was edited by: iTim

Yes, the 10,1 is a late 2009 model. If it will work depends on whether the pc graphics card will supply Mini DisplayPort compliant signals.
Here is some information on using the 27" iMac in Target Display mode:
http://support.apple.com/kb/HT3924
Hope this helps.
Message was edited by: captfred

W701 esata port suffering from poor design/quality from manufacture?

After having my W701 for 5 weeks, with 2 replacment of MB due to different problems, last time bios and port problems, I got i back from Lenovo today. I had reported it with a no functional/very poor functional esata port.
What happens is that:
With my lacire drive;
When I write to internaldrive everything is ok - when I write from my internal drive to the external it stops and says that the disc is no longer attached.
With my chieftech cabinet with esata port:
Writing from works fine - writing to starts good, then hangs for a minute or so - then drop from 50 MBps til 18 MBps, then continous, and does it again.
When I use them against my HP Homeserver EX495 it works like a charm, so non of the disk is the problem, unless the have some love for my HP, and hate Lenovo - but that would seem rather absurd to me.
The last MB didn't work better, and the new one dosn't either. Anyone who has an idea? I can't belive that 2 MB has the same problem, or? Allthough the IBM technician admitted when asked that he had not tested the esata port, he figured that since it was on MB, and that was changed it would work fine - but obviously that wasn't right.
edit:
I did another test now after packing a .rar file. The transfer to the lacie failed, but to chieftech it went fine. But - sending huge .tiff files was the reason of buying esata disk, so that dosn't really help me, other than telling that sending 100 files will crash, and 1 file is less probable to fail, but has currently a 50/50 chance of doing so.
I tried with the chieftech later - and it repeated the problem - it started with 6 MBps - den stopped - worked again - and so it kept on working.
How I tested this time:
1 file was zipped on my server - 2,5 GB (1)
1 file was zipped on the internal drive - 5,5 GB (2)
Transfer of file 1 from server to drive went fine to Chieftech , but failed on Lacie.
Transfer of file 2 from internal to both Cheiftech and Lacie failed big time. Chieftech froze explorer, and until I plugged the disk out by napping the cable out it wasn't possible to use the computer. Lacie failed after 5 seconds.
The first times I tried to transfer 129 files - and that didn't work any better.

Sorry, but I have no suggestions for solutions to your first post.
But, the W700 can run without RAID; you just need to turn it off. Backup all files before proceeding, during the boot process you can press CTRL + I to enter the RAID BIOS. Simply remove the drives from the RAID and install the OS to HDD 0 or 1. The other HDD will then be an "extra". After doing this you may also be able to hide RAID in BIOS, can't remember 100%, but should be do-able.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Adapter card for firewire ports

iMovie recognizes my camera but will not download. Genius Bar succeeded using an adapter card with firewire ports with assumption that port on computer was bad.
I am searching Apple Store and cannot find this adapter card. What would it be called?
thanks for help

If you mean the online Apple Store, it doesn't currently carry any adapter cards of that type. They are available from many other online vendors. But why not buy one exactly like the one the Genius used, at the store where s/he used it?

ESATA express card does not work with Mavericks. Any suggestions?

This is an Apiotek II 300 Express Adapter. I went out to Apiotek.com and it appears the domain is for sale. Is there any way to get a software update or do I have to buy a new Express Card that allows eSATA drives to work with Mavericks. I did a backup before I upgraded using X 10.7.5 and everything worked fine. The eSATA drive is not seen using Disk Utility either.
Thanks for any help or suggestions.

The driver has to come from the manufacturer of the card, so your two options are to get another card or to use your full backup to go back to 10.7.5. That assumes it's a clone backup and not Time Machine.

Mavericks doesn't work with eSATA Express Card

This is an Apiotek II 300 Express Adapter. I went out to Apiotek.com and it appears the domain is for sale. Is there any way to get a software update or do I have to buy a new Express Card that allows eSATA drives to work with Mavericks. I did a backup before I upgraded using X 10.7.5 and everything worked fine. The eSATA drive is not seen using Disk Utility either.
Thanks for any help or suggestions.

Have you foud a solution? Experiencing the same problem with a Nikon D4 and D800E

Express 34 cards with 2 eSata ports

Similar Messages

Maybe you are looking for