Express card 34 (Sony SXS) reader that connect via usb 3.0

Just bought a blazing fast new PC to run Premiere and realized that although I now have lots of USB 3.0 ports on it I don’t have a Express card that supports USB 3.0
Looking for a faster way to unload an SXS card into my PC – Searched but can’t seem to find anything. Ideas?

I feel your pain. My USB 2 Sony SXS card reader/writer tranfers XDCAM EX files at 31MB/s, which means you can copy 31 GB ( about 2 hours) in about 17 minutes.
With my Dell Precision M6600 and its Express/card slot, the same operation only takes 3 minutes and 17 seconds at 160 MB/s.
Expect transfer speeds of 80-90 MB/s with a USB 3.0 reader/writer but Sony has yet to come up with one.

Similar Messages

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. Amy I just out of luck?

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. The drive does not show on my monitor. Any suggestions or my I just out of luck?

Do you have Finder Preferences set to show other disks? Nothing wil show on the Desltop until you make that change:

Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

Right click on your device icon on the left pane of iTunes and click on transfer pur....

FCE wont read a camcorder connected via USB?!?! ***? what do i do?!?!

i have a Canon FS11 and it only has USB connection
i've read that FCE wont recognize camcorders connected via USB?
also, ImageCapture and CameraWindow wont recognize the internal Flash drive
the only application i can currently download with is iMovie
what gives?
what do i do?

ok, i READ TFM!!!
it said to do a "capture"
i've also tried Log and Transfer, and a window pops up
i click on the little icon on the upper left hand corner, but any folder i select, i get this error message:
"CANON" contains unsupported media or has an invalid directory structure. please choose a folder who's directory structure matches supported media
i'm getting seriously ******, i'm NEVER going back to that store that sold me the FS11 as full MSRP even when it was already discontinued
i'm quite ****** right now

How can I create a new folder in an external disk that is connected via USB to my Mac?

How can I create a new folder in an external disk that is connected via USB to my Mac?

Just like you would create a new folder anywhere. Open the drive's icon from your desktop or the Finder, and click shift-command-N. (Or use the Finder menu if you prefer - File - New Folder).
If you can't create a folder, your drive may be the wrong format (you can't write to a Windows/NTFS formatted drive, for example). You'll have to back up any files you have on there, and then use Disk Utility to reformat it to Mac Extended (if it will only be used on a Mac) or MS-DOS format (if you want to share it with a PC).
Matt

Can't see mounted volume of my Canon G9 when camera is connected via USB

Why can't I see mounted volume of my Canon G9 (with 8GB SD card) when camera is connected via USB. I just want to be able to download the movie files. Aperture does this fine on my other Mac but on my MBP I use Lightroom and it does not automatically download additional files a la Aperture.
Also can't read via Kensington Multi-SD reader but suspect that's because it is a little older and does not support the higher capacity SD cards

Digital cameras have several modes in which they can connect to a computer.
One mode is sometimes called "Mass Store". The camera acts like a USB disk or thumb drive. It appears in the Finder and files can be copied from it. This obviously is what you are looking for.
Another common mode is called PTP (Picture Transfer Protocol). In this mode, the camera will not appear in the Finder. You use special software to select and transfer the images. There are many applications available to do this: iPhoto, Aperture, Image Capture, the software provided by the camera's manufacturer.
Consult your camera's manual to see if you can select the mode. My Nikon cameras can be set to either of the modes I mentioned. I think I have heard that Canon supports PTP only. I don't have a Canon, so I can't verify this. In that case you could use Image Capture, or Canon's software, or use a card reader. Card readers are usually faster than the camera anyway.

Since upgrading to mavericks anything i connect via usb disconnects

since upgrading to mavericks anything i connect via usb disconnects randomly. everything from ipods, phones and usb thumb drives is there a patch or fix out there. starting to become a pain. PLEASE HELP

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

When iPhone 5s is connected via USB no audio is heard

Hi There -
I've seen older threads on this issue but I don't think I've really come across any solutions. My issue started yesterday; now before reading further I have to ask that you please keep in mind that I did perform the latest upgrade on my iPhone a bit earlier in the day.
When I connect my iPhone to my vehicle sync system and announce that I'd like to connect via USB, the voice recognition repeats my request and then the music on my iPhone shows to be playing on the display in my vehicle. The problem is that though the music appears to be playing and the minutes played are being displayed there is no audio coming through. When I switch to the Bluetooth Audio option all sound comes through.
Now, as a 2nd test, we connected my sons iPhone 5s via USB (he has not taken the latest update on his iPhone) and the same issue happens with his. Voice recognition changes to the USB format as requested, music appears to be playing but no audio is heard. When we change his phone to Bluetooth Audio the audio comes through nice and clear.
I'm not entirely convinced the update caused the issue so I wanted to put this out there to see if anyone has run into this and were able to actually resolve the issue.
I know the USB cable is working fine because when I do plug it into either phone the phone makes the little connection sound and pops up a brief battery percentage box. I also know the cable is working because when we announce USB as our audio of choice the system recognize USB via the iPhone.
One other thing I tried looking for was the option on the phone to switch from Docked to Synch - I know on my iPhone 4 I was able to switch back and forth through iTunes and would also have the option if I tried to watch anything via You Tube when connected to the dock; I cannot find this anywhere on the 5s when connected via USB.
Help is greatly appreciated!!!

I have had similar troubles with wifi.. some improvement removing BlackBerry desktop software & drivers & reinstalling after reboot... I used the same installer I had previously, but a fresh downloaded installer couldn't hurt...
10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727

TS2756 I can no longer connect via USB/service missing

..& my iPhone does not show up on the list anymore. I can still use Wi-Fi, though. I would like to be able to use the USB connection again. Resetting the network settings doesn't help. BTW, I'm using it with my MacBook Pro running 10.7.5 and my iPhone has the latest iOS update as well.
When I first got the phone, I always used my internet connection via USB, but then it started giving me trouble. I tried all kinds of suggestions that I found here and it was a real crap shoot -- sometimes it worked, and sometimes not. Now it just won't work at all. I recently deleted my iPhone from the list of services thinking that the next time I plugged it in, it would recreated the service. It did not. So, I'm still using it as before: just connecting over Wi-Fi (the network is still available, it just doesn't show up in my list of services on the left-hand column under "network").
Anyone have any suggestions that they know will fix this?

Hi DaveX83 and welcome to the discussions.
A few things to try.
Press the reset button once on the back of your Extreme and let it restart. Check for proper operation.
If no help there, keep the ethernet cable connected, and open Airport Utility. Click on Manual Setup near the bottom of the pane. On the next screen click the Airport icon at the upper left of the pane, then click Wireless in the line just below that reads Summary - Time Capsule - Wireless - Access.
Check to see that your wireless is set up, security set up, passwords, etc. You may need to reconfigure your wireless settings again and update the Extreme to store them and restart.
Hope this helps.

After updating to iOS 8.3 on my 5s, my phone no longer will connect via USB to my GMC Terrain.

Bluetooth connections still work and was able to connect via USB with an iPhone 6, bit the 5s will only play the first 5 seconds of a song after it is connected, then the song stops and no matter what is done, even restarting the car, it will not reconnect, I only receive an error saying that it is connecting the USB. Is there a fix for this?

Confirmed solution from Apple:
You need to do a full OS restore through iTunes on your phone. You can then restore from an iCloud or iTunes backup to be back in business. It *****, but that's the only solution right now.

How do I make my printer more secure while connected via USB to my Airport?

So a neighbor (a friend, fortunately) accidentally installed my printer on her computer via the network (her computer showed it as a 'Bonjour' printer) and started printing stuff, even though my printer is connected to an encrypted Airport Extreme.
My printer (an old HP deskjet 5550) is connected via USB to my Airport Extreme, which has a WPA2 secure password protecting it. Also, the "Share this printer" box was unchecked in the printer utility.
The DSL lines for me and my 20 condo neighbors all convene in the basement somewhere into one or several master routers.
I'm concerned about this breach of security (obviously) and wondering about security of my iMac as well. The iMac is connected to the base station wirelessly and has the firewall set to 'Set access for specific services and apps'.
I figured if the Airport Extreme has the WPA2 password set (and no one else knows the password) that no one would be able to gain access to the printer that is wired to it, or the iMac that's wirelessly connected.
What am I missing? How did this happen? and what can I do to ensure my network isn't visible or vulnerable to my neighbors or others with bad intent?

are there settings in the airport utility that you can adjust to make it unshareable from the router?
The "bonjourness" of the access to your printer suggests that your firewall is probably doing its job.
If your DSL connection is connected to the WAN port on the AE then the folks on the DSL side of your set up should only be able to see things on your LAN that you've set for 'access from the internet'. e.g. allow access to my printer/disk/... from the internet.
For printers there's an airport utility setting 'share printers over ethernet WAN port' and 'advertise printers globally using bonjour'. How's that set?

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?

Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

Iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!

Express card 34 (Sony SXS) reader that connect via usb 3.0

Similar Messages

Maybe you are looking for