Express Card Driver Not found after upgrade to 10.6.7

I upgraded my macbook pro to version 10.6.7 recently and later found out that the express card 34 slot drive was missing and could not access my Sony SxS cards. After some extensive search I found the site where I could retrieve the driver from. It is listed below. Worked for me! It should work for you also.
http://support.sonybiz.ca/esupport/Navigation.do?filetype=Drivers
SxS Device driver Ver. 1.0.52020 forMAc (Oct 2010)

Hi,
I need to configure a copier konica minolta 7145 with IP-432 on Mac OS X 10.6.7.
the copier has never been used before on this computer, can you tell me how to print with the Konica on mac, which drivers to install, what kind of cables and which procedure.
Thanks a lot!

Similar Messages

Wifi driver and graphics card driver not found, drivers avilable on site says incompatiable .

wifi driver and graphics card driver not found, drivers avilable on site says incompatiable .

Hi:
The parts list for your notebook indicates that it has a Realtek RT8723BE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 combination adapter.
These would be the W8.1 drivers you need for that card...
Wireless:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_143747_1&swEnvOid=415...
Bluetooth:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_142906_1
See if the Intel graphics driver directly from Intel works...
https://downloadcenter.intel.com/download/24870/Intel-Iris-and-HD-Graphics-Driver-for-Windows-7-8-8-...
Then install the nvidia hd graphics driver.

Sim card was not detect after upgrade my iphone4s to ios 6.0.1

my sim card was not detected after i update to ios 6.0.1
i had ald try many time plug in n out my sim card it keep on show searching no service or no sim
i had reset my network setting n i reset all n now i cant activate my iphone

Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/e0f22e92de98ebae10e 3fd537c16619e.jpg

Dvd drive not working after upgrade to osx10.9

Since my Macbook upgraded to 10.9 the DVD drive no longer works.
Putting in either a pre-recorded disc or a blank to burn results in the disc being ejected after spinning for a few seconds.
The SD card reader also stopped working but I was able to correct that problem.

Same problem here on a mid-2010 21.5" iMac. Will read CDs and 1 out of 100 DVDs (1 kids' DVD, weird) but generally nothing in DVD format.
I tried all the solves listed (change prefs, reset EMC and both PRAMs, boot from internet disks, even an Endust cleaning CD). Nada. I then set up a Joint Venture call and they diagnosed the drive as faulty after repeating all of the above. They say it's very possible that dying Superdrives can read CDs and even burn disks but not read DVDs. They said it'd be about $150 to replace the drive at a Genius Bar.
Here's where I try to be helpful.
If you're found this thread and you're not under warranty, don't waste ANY time testing it or trying to fix. Certainly don't roll back to previous software versions -- wasting hours of time and eliminating software features you may like or introducing incompatibilities. Just hop on over to Amazon and buy a $30 (not kidding) Amazon Basics external DVD drive. I ordered one w/ my cleaning disk knowing I'd prob need it and prob wouldn't want to pay Apple to fix my 3-year old machine. Works like an absolute charm for me. Faster ripping CDs than the Superdrive, plays DVDs through DVD Player, VLC, or XBMC instantly.
So my advice (ignore it if you like, it's worth what you paid for it) is to ignore any conspiracy theories about whether Apple planned this. IMHO, it doesn't matter for $30. Your time is worth more than $30. Just buy an external and get on with your life. You can even use it with your drive-less Air when you get one, if you don't have one already. How often can you solve a complex computer problem instantly, and be better off in the end, for $30? Just do it. End of advice.
HTH.

IPhoto Library Not Found after Upgrade to Leopard

I was running the newest iPhoto under Tiger and I just upgraded to Leopard. I tried to open iPhoto and a message said, "iPhoto library not found." It was there before I upgraded from Tiger. I mostly use Adobe Bridge so I didn't have much in iPhoto but I'm curious to see why the library disappeared and whether it can be restored. I looked all around on the hard disk and didn't see the iPhoto library anywhere. Thanks.

Yes, it must have been upgrade and install because I followed the defaults. The iPhoto library was in the Pictures folder in Tiger and I never moved it. After the upgrade to Leopard, it was gone--it is no longer in my Pictures folder, nor does it seem to be anywhere else. I didn't touch it--the upgrade made it disappear. Why did that happen? What can be done about it? Thanks very much.

Bluetooth was not found after upgrade to 10.4.2

Does anyone know how to bring back Bluetooth device after upgrade from 10.3.9 to 10.4.2? I've already check my system profiler, and it shows, "No information found" on the bluetooth hardware. On the Apple task, the bluetooth icon shows, "the bluetooth: not avilable", and it color is gray. Thanks.

Wittaya,
You have an Aluminum Powerbook and you've posted in the Titanium Powerbook forum area. You would want to post your problem here:
http://discussions.info.apple.com/webx?14@@.59999943

Library not found after upgrading to iTunes 7, old libraries don't work

For the second time since iTunes 7 was released, I've been asked to upgrade and did so without issue on the first day of upgrading. When I shut my computer down and came back the next day, however, the library is not found when I attempt to launch iTunes. Before, I simply reverted to iTunes 6 and copy/pasted a "previous library" as the current library. Now, though, I have a new iPod and it needs iTunes 7 to run. I've tried copy/pasting a previous library to the iTunes Library folder with no luck.
90% of my music is in the .m4a format so I need iTunes to listen! Not to mention, I need it to update my brand new iPod. I really need help on this, can someone give any advice? Thanks in advance.

johnc86,
Are you following the instructions from this article in the Apple Knowledge Base, in particular the renaming of the .itl file from the Previous Libraries folder?

T400 with ATI Radeon HD 3400. Driver not found after running ImageX.exe /Capture

Hello,
I was able to reproduce the following problem on a T400.
- unattended installation of WXP-SP3 (slipstreamed)
- reboot
- install latest ATI driver from Lenovo/IBM site (8.503.2.2-080818a-069536C)
- reboot
At this point, the video driver is well configured.
- Reboot once or twice, video driver still good.
- Boot the T400 on WinPE 2.0
- Capture the C:\ to a network file share using ImageX.exe (from Microsoft's WAIK 1.1)
- Shutdown the T400, and reboot on C:\
- At this point, video driver is "lost". The Hardware Wizard says "new driver found", but stick with default VGA.
Then I get an ATI error telling the driver is missing or not well installed.
- When rebooting several times, suddenly the card is back in the device manager as a Radeon HD 3400.
(without re-installing the driver ...)
Anyone has an explanation ?
Please not I did not run "sysprep.exe" before capturing with ImageX.exe
stefan

Update on this problem.
After running "sysprep.exe -mini -quiet -reseal -shutdown", I ran the "ImageX.exe /capture".
After rebooting the T400, the ATI driver was fine.
Either is a coincidence (but I could repeat it 3 times...) or it is not advised to run "ImageX.exe /Capture" on a non-syspreped Windows XP.
I know that a non-syspreped Vista system has a limitation if captured with ImageX.exe. But I am not aware on any limitation with XP.
Stefan

6 in 1 card Reader not found after installing Windows 8 - HP Pavillion Dv6

I am running a dv6874ca and after installing Windows 8 the 6 in 1 card reader no longer works - the system does not read any information. I cannot find the card reader in the device manager.
Note: I am trying to view a Sony Pro Duo card which was possible before installing Windows 8. The only item that appears under "disk drives" within the device manager is my hard drive.

Try these drivers:
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45112.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
I have tried all the solutions provided on the HP website but none of them worked.
I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
If some genius can help me I will pray for him/her that all his/her wishes come true.
Thanks you in advance.
Imroz Baig

I just got my HP Deskjet F2120 working in Windows 7. Here's how:
Insert the setup disk in your CD/DVD drive. Choose to view the files in Explorer. Scroll down to the file "Setup," which is identified as an application.
Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
ALSO check "Run this program as administrator" at the bottom of the window.
Press "Apply," then "OK."
Now you can double-click the "Setup" file and run the software installer.
It will 100% work inshallah...

Samsung External Drive Not Working After Upgrade to 10.9

Hi,
I upgraded to Mavericks (10.9) on Friday and now my external drive does not show up when I connect it to my Macbook Air (2GHz Intel Core i7, 4 GB 1600 MHz DDR3).
My external drive is a 1 TB Samsung S2 Portable Drive.
I am attaching how it appears in Disk Utility now.
Please please can you help me? I'm nervous that I have lost all my personal data.
Thanks,
Emmett

The drive may have some software on it that is incompatible with Mavericks. Not your files that are on the drive, but something from the manufacturer of the drive.
There may be some software on your mac, also from the drive manufacturer, that is usually used for accessing the drive, and this may be incompatible with Mavericks.
Or your drive may just have taken a very inopportune time to die.
I'd try:
a different USB or firewire cable
It would help to give us more information about your computer. If you can, use EtreCheck Etresoft: EtreCheck to generate a system report and paste it in a response here.
Try a safe boot (restart, hold down shift until you see the Apple logo). Then try to mount the drive. If this works, then you know the problem is with some 3rd party software on your mac, probably some utility from the drive manufacturer. Mac OS X: What is Safe Boot, Safe Mode?
TechTool may be able to repair the drive so that you could mount it. Techtool Pro 7
Look on the drive manufacturer's website for an update to the software.
If you have another computer with Mountain Lion on it, perhaps you can use this computer to copy the files, then erase the drive, and then put the files back, without the incompatible software.
Maybe the drive will mount in target mode on your mac or another mac, and you could transfer the files. How to use and troubleshoot FireWire target disk mode

Windows XP drive not found after install

After installing Windows XP on boot camp, I have found that the computer will restart and then fail to find the drive I have just installed windows on giving me an error message something like "Cannot locate boot disk". If i restart into OSX then it finds the drive but i cannot boot into windows because it will just display the error message. If i try installing Vista this works fine but Vista is shockingly awful and i would sooner have XP. Any ideas??

Evening all
Have you disabled any Norton, KAS, antivirus anti spyware programs?
Did you set a restore point prior to installing the Sp3?
Which method did you install the Sp3 from? full adminstrator account or apply the subinacl program and reset.cmd ?
There may be other problems prior to install of Sp3, Are the bios,of the systems you are using, the latest version?
What type of system are you using?
Are you using the latest W.H.Q.L. Microsoft signed drivers video available for your system? 174.74 from Nvidia, 8.4 catylst for ATI/AMD?
If you are using X2 processor both the processor driver and the dual core optimizer. You cannot depend on the Sp2 driver for proper operation.
What about chipset drivers?
And the mouse, and other perpherials?
If you have any unsigned drivers you will have endless reboots.
If you check the system to see if safe mode is available you can trouble shoot what is happening
*Press f8 prior to the Windows splash screen*
Log in as adminstrator *Full one*
If you are using an AMD machine, check the regedit for the following key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Intelppm\Start
If this key exists change it to 04 Hexdecimal and reboot.
as seen here
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=3072752&SiteID=17
If you are still having problems see follow the advice at the end of this posting and add what problems you are having. And send the logs after a MSFT team member responds with an address.

USB drives not found after erasing them: iMac.

I had a couple of USB drives that showed empty but had almost zero capacity. I erased them via Utilities. Fine. (didn’t get to the part about emptying Trash….doh.
Now my iMac does not show the drives in Finder (although I get a reminder to eject msg when I remove it).
The drive is recognized on my Macbook.
So now I can’t use my memory sticks in my iMac.
How can I get the iMac to recognise the sticks?

Finder preferences not shown, but see attached. The stick is seen in finder and is mounted, but not in Devices.

Modules not found after upgrade to 0.7.1

My last upgrade prior to 1/05/06 was 10/30/05 and that boot was labeled 0.7.1.
I switched to udev some time ago.
The upgrade today seemed to run perfectly (I'm impressed by the obviously skilled work in this process) and I monitored the questions and executed the instructions, including the addition of initrd to grub menu.
System boots properly and I can log in as user.
The command 'startx' produces too many screens to read (I know-use script) but the final display is "no drivers, no modules found, one of which is 'ati'". Please let me know if you need the full error output of startx.
Did I miss something in the upgrade messages which, of course, are gone now?
Thanks,
Bill Barnes

install the drivers:
look here for migration
http://www.archlinux.org/blog/2006/01/0 … rade-xorg/

CD drive not found after installing Itunes

When I install Itunes on my computer - the computer can not find or open my CD drive at all. If I uninstall and reboot the CD drive shows up and operates. I have tried to reinstall, update drivers, etc with no luck. Any thoughts??

I have seen several other people with the same issue. The problem seems to be some level of incompatibility between the Gear Software CD/DVD filter driver used by iTunes and some CD/DVD drives under Vista. I too have a Dell with the same problem, but I'm not holding my breath for a fix. The only workaround I know of is to to remove the GearAspiWDM filter driver from the registry. If you do this and reboot, your DVD drive will show up again, and iTunes will work except for burning CDs or DVDs. ITunes will also complain about drivers being installed incorrectly whenever you open it.
Here's the registry key to remove:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}\UpperFilters=GearAspiWDM
I'm not sure whether the problem is with Vista, Gear Software, iTunes, or the Dell DVD drive firmware. But, getting all the parties working together to resolve this one will be next to impossible in my opinion.

Express Card Driver Not found after upgrade to 10.6.7

Similar Messages

Maybe you are looking for