Express doc. termination while posting GR
Hello all,
While posting GR the error is Express doc. termination, seems this is number range issue so i checked in MKPF for the last number that wa 379,
so i changed the number to XXXXXXX379 in OMBT, but again the same issue while posting GR and the number range in OMBT is increased by 10,
can somebody help me out.
Thank You
Hi,
check this below sap note.
check in SM13 records below messages and follow mentioned sap note.
Update error in SM13 shows error "SAPSQL_ARRAY_INSERT_DUPREC".
SM13 shows an error in "L_LK01_VERARBEITEN".
1458992 - SAPSQL_ARRAY_INSERT_DUPREC
Thanks
Siva
Similar Messages
-
Document express update terminated while doing delievery
hi all
I ve a problame when i am doing delievery with vl01n I am getting an erroe stating that document express trminated when i click the inbox it shows update was terminated
user sap1
transaction vl01n
updatekey 01ab371d6f2b4161b1704e58d0026f71
plz help me outHi,
As far as I know, this issue is usually related to BASIS. It comes when the update is not happening in the data base for that document. II used to get that issue several times. It was always related to BASIS since the database was either full or update in the data base was not happening.
So check with your BASIS guy about this issue. He might be able to resolve it.
Regards,
Rohan -
SAP NOTE REQUIRED FOR UPDATE TERMINATION WHILE POSTING GR SUBCONTRACTING
Hi all,
Please treat this as very urgent...
below is the dump error analysis
Runtime Error SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
Date and Time 25.06.2008 07:27:03
User and Transaction
Client.............. 800
User................ "EDWIN"
Language key........ "E"
Transaction......... "MIGO "
Program............. "SAPLKAUP"
Screen.............. "RSM13000 3000"
Screen line......... 2
Information on where terminated
The termination occurred in the ABAP program "SAPLKAUP" in "INSERT_TAB
The main program was "RSM13000 ".
The termination occurred in line 464 of the source code of the (Includ
program "LKAUPF01"
of the source code of program "LKAUPF01" (when calling the editor 4640
The program "SAPLKAUP" was started in the update system.
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" oc
the
procedure "INSERT_TABLES" "(FORM)" but was not handled locally, not de
the
RAISING clause of the procedure.
The procedure is in the program "SAPLKAUP ". Its source code starts in
of the (Include) program "LKAUPF01 ".hi buddy
This kind of problem generally occures when you have not defined Number range. Please check the configuration. It may be due to insufficient catche memory. if so you may get it resolved with your basis person.
regards
kunal -
Express doc 'Update was terminated ' received from author
Hi ALL,
In VA02,while I am trying to send EDI for Order Confirmation and saving ,I am getting a pop up as SAPOffice Information as the 'Express doc 'Update was terminated ' received from author'.
I am not able to reach till this information message by debugging.Please guide me to correct this error.
Thanks,
Savithamainly This error happens due to insufficeint data,may be you are not not filling mandatory fields or wrong data.
First create the data manually and see what happens.
Thanks
Seshu -
Error while posting parked doc
Hi friends
I am getting the following error while posting a parked doc-
Field BSEG-SECCO. does not exist in the screen SAPMF05A 0303
It is actually asking for the Section Code which does not appear in the screen. I am wondering where I can set the Section Code as mandatory or optional. I have checked the FSV but to no avail.
Help me plzz........Hi......Thxs a lot for ur reply.......But none of the OSS Notes suit my requirement. However, I have observed that when I park the doc thru FBV1 and later try to post the same, it is getting posted without any errors.
Any idea how this is working?
Cheers
Hrishi -
While posting the Doc thru GM_CREATE_BUDGET taking to short dump
while posting the Doc thru GM_CREATE_BUDGET taking to short dump
giving the message:-
Runtime Errors MESSAGE_TYPE_X
Error analysis
Short text of error message:
System error during characteristic derivation maintenance
Long text of error message:
Technical information about the message:
Message class....... "ABADR"
Number.............. 599
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program SAPLABADR
Include LABADRF01
Row 255
Module type (FORM)
Module Name WORK_AREA PUT
225 EXPORTING
226 i_write_to_tabadrx = 'X'
227 i_list_access = buttons-list_access.
228 ENDIF.
229 * test mode: spool trace results
230 IF NOT debug-print_trace IS INITIAL.
231 CALL FUNCTION 'ABADR_TRACE_WRITE'
232 EXPORTING
233 i_write_to_spool = 'X'
234 i_list_access = buttons-list_access.
235 ENDIF.
236 ENDFORM. "trace--show
237
238 ----
239 * FORM WORK_AREA_DIR--ADD *
240 ----
241 * ........ *
242 ----
243 * --- I_IDENTIFIER *
244 ----
245 FORM work_area--put USING i_identifier TYPE t_identifier
246 i_work_area TYPE any.
247 DATA: name TYPE t_name.
248 FIELD-SYMBOLS: <l_work_area> TYPE ANY.
249
250 CHECK NOT i_identifier IS INITIAL.
251 * put item to work area
252 READ TABLE <strategy>-tab_func_parameters INTO name
253 WITH KEY identifier = i_identifier.
254 IF sy-subrc <> 0.
>>> MESSAGE x599(abadr).256 ENDIF.
257 PERFORM namework_areaassign USING name.
258 * unicode
..........................contd...
Pls help.Hi Victor,
this is due to the Config issues, just check the config related to the "Settings for Availability Control Ledger" in the Grantee Managment -
Include field u201CXREF1_HDu201D from "BKPFu201D table while posting or Parking Docs
Hi,
I want include one additional field while posting or parking any accounting document. The field i want to include is from u201CBKPFu201D table and field name is u201CXREF1_HDu201D . This is at Header level.
Please advise as to how i can achieve this.
Thanks,
SafiHi,
Checking documentation of the data element, it seems the field is used for RE (Real Estate) only. But I'm not sure.
Regards,
Teddy Kurniawan -
Issue while posting billing doc to account
Hi All,
There is an inssue with an inbound idoc, actually when an inbound idoc is recieved, sales order is created automatically, but while posting the billing document to account it shows an error, pricing error in item, and when we check the the data in idoc we are getting it selects the wrong Relational owener id which are not maintained, so i need to find out in which exit i can the logic for that please help me.
The error is not consistent , sometime it works and sometime does not.
see the below
''When we change this Relational Owner from ‘F’ to ‘J’, they are able to posting their accounts. I want to know from where this ‘F’ is getting populated because we didn’t maintain ‘F’ anywhere. Need to know from where –F is getting populated in the sales order''.
Thanks
IkHello Khan ,
You need to solve this issue on your own by debugging. I suggest you to set a watch point on the filed i,e variable-name = '-F' to know how it is being populated.
Thanks -
Error " Express document terminated"
Hi all,
I am getting an error while saving the delivery " Express document terminated" and i think its not able to determine sold to party......as i hve read some posts.....
I have checked No range and copy control settings and VOV8 and all looks fine.
Wts the resolution for this......
cheers
shalsa007............dear frnd.
The mentioned error can occure due many reasons, i had this error thrown by system due to some APO config.
Best approach is as suggested by Santosh go to SM13 and read the Dump analysis, once you knw which programe is causing the error search for the relevant OSS note, if you dont find any Note then raise this issue to SAP.
If you have few project teams working it will be worth to try finding recent changes done.
Hope this helps.
Regards,
Paresh -
'Express document terminated' - Error
Hi, can anybody please advice on what is 'Express document terminated' - error?
I am getting this error while posting for some particular confirmation numbers and it is against the table AFRU. Please advice. Thanks.HI sagar,
Check if any user exit has a commit work statament with respect to this transaction.
In general you get this type of error messages when you use a explicit commit in a place where you are not supposed to commit.
Regards,
Ravi -
Error while posting depot excise invoice
Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tusharhello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni -
Open qty errin Selection list For Ref Doc. screen while converting to order
Hi SAP Gurus,
For one of my materials, the open quantity is not updating in the Selection list For Ref Doc. screen while converting to sales order.
Can you please help me?
Thanks,
KetanHi Senthilkumar,
I really appreciate for your kind Hint of SEL ID.
I created and assigned new 'Sel Priority' to the SEL ID same as for Routing.
Now while converting Planned order to Production order system is asking for Reference operation set as there is no such need of Routing as I already mentioned in previous post.
Regards, -
ErroR while posting J1IH (TR6)
Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr 25000
to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr 25000
Basic Excise Duty A/C Dr 22000
ECS Dr 2000
SECS Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil KumarThe profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar -
Warning message while posting Credit Memo.
Hi Guru,
Currently the Invoice shows a soft warning message if a same number
in Reference field (XBLNR) is used to post two different inovices.
the client wants the same kind of Soft message to be appeared in case of a same number is used in the Reference Field when Posting credit memo. I think the check shd be against Accounting Doc right??
Incase of invoice we have a check for duplicate invoice in SPRO and we can maintian it..
What about credit Memo??? we do have any config...to my knowledge we need technical development.
In Se91 i will go and create new Message and assign it to M8(Message Class for invoice)........and do assignments in OBA5
Now the soft warning msg can be achieved only by calling this msg in ABAP Code right??? can be done thru Config..?????.
if any other details if i need to know please do let me know.....or anyother suggestions....to achieve this,,,
Is it a Config or Developement ???
Thanks for the support
BalajiIn OBA7 if i check the "Reference number" that means while entering the document the reference number is compulsory field.
and in vendor master i already checked the docueble invoce check that is why while posting KR it is giving the warning message.
Regards, -
Runtime error while posting GR
This is Naresh, new to SAP-MM. While posting a GR iam getting a ABAP runtime error. Before posting Iam using check button, but no error was found. The error is MESSAGE_TYPE_X. And there is a long discription about the error like error analysis, trigger location of runtime error, source code extract etc.
Please help me. Thanks in advance.Hi,
385830 is a note created to issue dumps rather than termination messages. This was done due to problems with data consistency in MM-IM.
If the dump comes regularly, you know how to reproduce and your ABAPers can't find the problem in debugging, don't be shy to open a message on MM-IM-GF-MB.
Regards,
Attila
PS: I second Jürgen's point regarding the amount of information.
Edited by: Attila Giber on Apr 27, 2010 11:20 AM
Maybe you are looking for
-
Would itunes run on windows xp pro?
Because I have itunes, but it wont open when i click on the icon on the desktop. But quicktime works fine, so the only conclusion i came up with is that itunes probably doesnt run on windows xp pro
-
Hi I'm running up-to-date system 10.6.5, acrobat 9 and latest Office 2011. When I use the comments/attach for email review from Acrobat it gives an error "An error occurred while trying to create a mail document. Acrobat is unable to complete your r
-
Pls i would like to know if there is any software or application for Nokia asha 201 update ? because sometimes my phone freez and i think it might need an update. thanks
-
Media Encoder Crash on Launch- ?
Media Encoder crashes on launch. It's a brand new install on a MacPro 3.1 with a brand new MacOs10.8 It runs through the list of plugins and resources that it loads with the Logo Screen but halts and crashes on loading CoreAudio... Please help? In de
-
I made a package and have a token number and don't know how to open a case
I made a package and have a token number and don't know how to open a case.