Express does not show IP address of wireless camera

I have a functioning Axis M1011 wireless camera, with a live stream into Safari on my local iMac. All is well.
My brand new Airport Express is definitely providing the wireless camera feed, as my internal airport card on my iMac is OFF.
What is odd is that Express does not show IP address of the wireless camera when you click on it in Airport Utility.
The iMac is static at 10.0.1.2. Express LAN IP is static at 10.0.1.1. The camera's wireless IP is static at 10.0.1.3.
I have a working, hidden network created by express.
I am baffled why express does not "report" the IP address of the camera that it definitely sees.
It does not report any wireless clients at all.
Any ideas?
Thanks.
mac

So your ASA should have a route on the inside interface to internal networks. The address of that next hop in the routing table is the one you should have in your arp table allowing you to reach non-directly-connected (subnet-wise) hosts within the scope of that route statement.
Think through the logic - ASA pings a host. It needs to determine proper egress interface. It checks and asks "Is it reachable via a directly connected interface (most preferred route)?" Answer no. "Do I have a route statement telling me how to get to it?" Answer yes (otherwise use default). OK - so ASA sends packet out egress interface defined in that route statement to the next hop as defined in route statement and waits for reply.

Similar Messages

Safari does not show url address line. google is taking up all the space...

safari does not show url address line anynore. google is taking up most of the space on the safari page

Hover the cursor over that line until it becomes a big plus sign with arrows on the left and right. Click and drag the cursor so that the rest of the address line is the way you want it.
(66963)

Airport Express does not show up under 10.3.9 - but shows up under 10.4.9

Hi
my Room Mate uses an PowerBook with 10.3.9 and was able to use his Airport Express before without any problem.
Without any reason the Airport disappeared from the options in his list in the taskbar, also looking for preferred networks does not show the station.
BUT
if I start my PowerBook - running 10.4.9 - with the latest Utility Program that came with my Airport Extreme BaseStation - I have no problems to identify, configure and connect to the Express Station!
Why is my Room Mate unable to get the Airport Express on his Mac?

Max,
As I read it below, you both have separate internet sources and basically two separate wireless systems. He uses the Airport Express as a base station for his system and you use an Airport Extreme 802.11n for your base station.
You said he used to be able to access the system but now he can't. What changes to the system were made during that period of time.
Under these circumstances what I think I would try is for him to open up the old Airport Admin Utility, factory reset his Express, and then try to reconfigure it to build his own wifi system with the old Airport Admin Utility. Once he factory resets it goes back to the factory id and loses all memory of any system it may have been tied to.
I'd call the new system a different name than the old system and if he uses security use a different password than the first one.
The thing I don't understand below, if he has his own separate system, I don't understand how you can see and edit his settings because he's not part of your system. However, since you have to be using 10.4.8 or later for the new 802.11n Extreme and it looks like you tried configuring his system with the new Utility and he's running 10.3.9 - that may have something to do with it.
Beyond this, it's out of my knowledge base.

Sh arp does not show mac address of IP --- ASA

Hi Everyone,
I can ping the IP from the ASA but when i do sh arp it does not show me mac address od that IP.
Need to know the reason behind this.
Regards
MAhesh

So your ASA should have a route on the inside interface to internal networks. The address of that next hop in the routing table is the one you should have in your arp table allowing you to reach non-directly-connected (subnet-wise) hosts within the scope of that route statement.
Think through the logic - ASA pings a host. It needs to determine proper egress interface. It checks and asks "Is it reachable via a directly connected interface (most preferred route)?" Answer no. "Do I have a route statement telling me how to get to it?" Answer yes (otherwise use default). OK - so ASA sends packet out egress interface defined in that route statement to the next hop as defined in route statement and waits for reply.

CS6 Bridge (PC) does not show adjustments made in earlier Camera Raw, or even its own Camera Raw! PLEASE HELP.

PLEASE PLEASE PLEASE WILL SOMEONE WHO KNOWS ABOUT THIS CONTACT ME???
CS6 Bridge does not show ANY of the adjustments I've made in previous versions of Camera Raw, and sometimes (intermittently) doesn't show adjustments made in CS6 Camera Raw.
I'm on a PC, I've uninstalled and reinstalled about 6 times. I feel so upset, I've spent literally HOURS going in circles on the Adobe website, trying to get help on the phone (I'll pay!!!) but there seems to be no way to contact anyone. I've posted this problem several times and no one answers.
If you don't know the answer, can you please tell me how to get tech help even if I have to pay for it??

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

Airport Express does not show up in iTunes to stream audio...

I updated iTunes to 8.0 and no longer can see my Airport Express as an option in the pull down screen to stream audio from my iTunes to the AE.
The AE has a green light. which makes me believe that it found my LAN, but it can't find my mac.
Router: Linksys BEFSR41
iTunes: 8.0.2
What am I doing wrong? Why did it break after upgrade to 8.0?

I have a linksys wired router BEFSR41 and was not able to see Airport express in the iTunes page to stream music to my A/V device for quite some time.
Linksys set up page has a setting called "Filter Multicast in "security" section that allows for multiple transmissions to specific recipients at the same time.
The factory default is "disable". Change this to "enable" and save settings.
I did not have to restart iTunes to see the change take effect. The Airport Express showed up along with AppleTV for me to select...

Logic Express does not show the waveform of the audio after recording

This week, Logic stopped showing the waveform in track.
At the time of recording the wave is usually draws but as soon as I stop is theonly track in a straight line as if no audio recorded, the audio is usually recorded, you can apply effects and plug-ins but it is impossible to edit.
Sorry for any errors in the text, I am Brazilian and I'm using google translator.
Thank you!

after hours of searching I think I found the solution in a post 2010. I do not know for how long, but now it's all working
credits for Foxboy71
you won't find the .plist files via spotlight - they are excluded from search,
go to (user)/library/preferences/
there you'll find the files named com.apple.Logic Express (xyz whatever).plist
delete them. Logic will rebuild them from scratch.
Fox

Dladm does not show mac address for aggr

All,
When I run dladm show-aggr for my two aggr interfaces, I have one not displaying its MAC. Anyone a clue how I can get this sorted?
key: 2 (0x0002) policy: L2      address: 0:14:4f:da:13:e8 (auto)
           device       address                 speed           duplex link    state
           nxge2        0:14:4f:da:13:e8          1000 Mbps    full    up      attached
           nxge3        <unknown>         1000 Mbps    full    up      attachedCheers,
Davy
Edited by: Davy_S on Apr 18, 2009 1:52 AM

I had the same problem. SUN support recommends latest kernel patches. That solved my problem.

Iphone does not show up in itunes wireless

i just bought a new laptop and moved over my itune from old laoptop to the new one. I copied over all itune files and folder and also resynced all my device with the synce cable. Once i completed that and check in itunes to sync wireless, still no device show in itunes.
please advise

If you're trying to find out if it is common then the best way is to browse the forums yourself or do a general web search.
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
Device not listed immediately after upgrade - https://discussions.apple.com/thread/6573744 - try restarting

Olsnode does not show VIP address

Why is that i dont see the VIP for one of the node here. Any thoughts...This is GI 11.2.0.1
solb:oracle$ olsnodes -n -t -i
solc 3 solc-vip.xxx.org Pinned
solb 4 <none> Pinned
I get the same output from both the nodes.

Hi,
Put here output of :
srvctl config nodeapps
cluvfy comp nodeapp -n <node_list>
cluvfy comp nodecon -n <node_list>
oifcfg getif -globalTo post output of commands above use formatting ({ code}) option of forum described in FAQ (http://forums.oracle.com/forums/help.jspa)
Regards,
Levi Pereira

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card? How would I know. Airport utility in my mac says no other devices connected.

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?
If both your MacBook Pro and iPod are unable to "see" the Wi-Fi network provided by the AirPort Express, it is most likely NOT that you are missing an "airport card," but the Express may be the issue instead.
One quick test is to see if either device can "see" other Wi-Fi networks. If they can, then you can definately rule both of them out as the issue.
By default, the AirPort Express will broadcast an unsecured Wi-Fi network with a network name of something like: Apple Network NNNNNN. Can either device see this network? If not, then I would recommend that you perform a "factory default" reset on the Express, and then, check again.

WRT610N V2 wired as 2ndary router to wired router, does not give IP address wirelessly

My WRT610N V2 is wired as 2ndary router to a wired router but it does not give IP address wirelessly to connected PCs.
It is getting DHCP IP address in the 192.168.1.xxx range from the 1st router, on its internet port, and issuing properly an IP addresses in the 10.10.1.xxx range thru its LAN port when wired to a laptop.
But if I connect to its 10.10.2.xxx wireless network with another laptop, the wifi adapter utility software shows the laptop is connected, but the laptop is not receiving an IP address. Please help in correcting this, as I need to use this router to give internet access wirelessly to guest laptops.
I know DDWRT does this kind of bridging with secondary DHCP when both routers are connected wirelessly, but it seems to me that if the 1st and 2nd router are wired together, DDWRT shuld not be needed for 2ndary HCP to take place.
And 2ndary DHCP is indeed working for those laptops wired to the 2ndary Cisco router: seems to me it should be able to do it also wirelessly.

In the upper right search bar type in 'two routers' to find your answer.

HT4259 Airport Utility 6.1 does note show "extend wireless network" option. How do I find the feature

I have an airport extreme and the utility is 6.1. I also have an airport express. I'd like to use the airport express to extend the WiFi. The "extend the wireless network" option does not show up in the Airport Utility 6.1. How do I go about finding that option? Is it something that doesn't need to be checked in Airport Utility 6.1?

I'm having the same issuse, the only work around I have found is by using an older version of airport utility
AirPort Utility 5.6 for Mac OS X Lion
http://support.apple.com/kb/DL1482
Hope that helps

I've a new account on iMac. When composing an email the contact list does not show up on the bar. WWhen I start keying in a name, it comes up with the address. How do I engage the contact list from the email?

I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

HT202570 My buisness address does not show up on apple maps as a correct address. The address is 1351 summit drive jasper AL 35501 and we have been here for 8 years.

I have been at my buisness for 8 years and the address does not show up as an address in apple maps on any of my devices. How can I fix this? My address is 1351 summit drive jasper al 35501.

@Kilgore-Trout, there is no "contact us" at the bottom of the Apple Map. All I get is report the problem...move the pin, which I have done numerous times. Google maps gets it right & due to that fact, we have to tell vendors to NEVER use Apple Maps when getting directions for deliveries. I love apple, own all their products and now my BMW i3 is using their maps & I would love to have them be responsive.

Express does not show IP address of wireless camera

Similar Messages

Maybe you are looking for