Express, motorola sbg900 and g3

1. can't use airport express assistant. i receive this error: this computer does not have a wireless card installed
2. itunes (6.0.1) does not recognize the express. express is connected to my receiver about 15 ft. away
3. express does nt recognize my wireless cable modem (motorola sbg900)
any suggestions, fix or workaround? just want to be able to play music from my mac (b&w g3 / mac os 10.3.9) on my stereo.
mac is connected to cable modem via ethernet, wireless function is utilized by my powerbook (and the express).
tried resetting, turned both off for half an hour. nothing happens and express just flashes it's amber light. thank you in advance for any assistance.
b&w powermac g3 Mac OS X (10.3.9)

the g3 does not have a wireless card. it's connected via ethernet to my wireless cable modem.
the express is only connected to the receiver and nothing else.
the powerbook only has 10.2.8 and i do not have a licensed upgrade for it right now. however, the built in airport wireless card does recognize the signal from the express, but it does not work.
i need this to work with the g3 because it's my home system the laptop is a work system.

Similar Messages

SBG900 and Touch?

Ok so I've had it with my WCG200 and I'm about to purchase a new wireless gateway. Can anyone vouch for the Motorola SBG900 working flawlessly with their Touch?
The Touch is bringing my WCG200 network down only revived by a hard reset on the WCG200.

Well,.... if you look up the WCG200 and SBG900 they both offer what you say Touch requires.
It doesn't seem to be a problem as far as specs go, just some other dark, unknown area of incompatibility that seems to be with the Linksys WCG200. I haven't met a fellow WCG200 that could get his Touch to stay connected reliably. I went to a wifi-enabled coffee shop with my Touch and I managed to take their whole network down just by doing some simple browsing. I had only to assume they were using a WCG200 as well.
It is noted though that Linksys supports Windows exclusively.

Webcam - Motorola SBG900 Gateway Help

i just got a webcam and have a motorola sbg900 gateway and i can't broadcast my webcam through yahoo messenger - i get network errors, but the webcam works fine - i see the image, but can't broadcast. i tried to turn off the firewall through windows and through the gateway, and also tried to forward the port to 500, but can't get anything to broadcast. can anybody help? thanks for looking

I had the same problem getting network errors when trying to broadcast my cam on Yahoo IM.
However I found a fix that worked for Yahoo and MSN. I will give it to you just as I found it. Hope it works for you.
a) Log into the interface of the Modem with the 92.68.00..
b) Go to the Gateway section on the left hand side of the screen and click onit. On the status section there will be a list of DNS Server Address, write these down.
c) Log out of the Cable Modem.
d) Go to start then control panel (or settings then control panel if running windows 98SE).
e) Double click on network connections.
f) Right click on the Local Area Connection (LAN).
g) Go down to properties and left click on it.
h) Highlight Internet Protocol (TCP / IP) and click properties.
i) Put a check mark in use the following DNS Server Address, then add the DNS numbers that you wrote down in there.
j) Press the okay button then presses it again to get out of the screen.
k) Try the web cam. If it does not work then restart then restart thecomputer. After the computer restarts try the web cam once more.

[svn] 3045: Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'

Revision: 3045
Author: [email protected]
Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
Log Message:
Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-13900
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

Revision: 3045
Author: [email protected]
Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
Log Message:
Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-13900
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network?

I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network? (I can't seem to find a way to see it).
My computer is acting....well, strange. I can't put my finger on it but it doesn't seem right. Menus look skewed. Some applications look like they're trying to disguise themselves as apple (no consistant window formats). Airplay turns on and off on my devices on it's own. And some locked system preference seem to unlock themselves, or won't even grey-out after I lock them.
I have changed my password many times but the issue keeps coming back. I feel like I'm going crazy - but I know that something just isn't right...maybe someone's been hacking me? (I have no idea why...)
Anyway, maybe I could have stemmed from an improper setup of my wireless network.
Any thoughts?
Also, right now, when I just signed into apple communities....
     I have an iCloud email address that is accociated with my 1 and ONLY Apple ID...
     It seems to have been working but...
     When I loged in here it only saw my:
                              OLD MacBookPro
                              3 Old iPods
                              My new MacMini with OS X Sever (Server is currently turned off)
     Could my Apple ID be confusing my MacBook (which I'm currently using) as an old iPod or my old MacBookPro?
     I doesn't even see my iPad (1st generation), or my iPhone 5
     Also, the Mac App store is giving me the option to download Mountain Lion??? I already have version 10.8.3...
Can anyone perform an analysis on my account and computer? I have been to the Apple Store 6 seperate time and the problem was not resolved (after 6 COMPLETE hard drive wipes).
PLEASE HELP!

i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.

I have a new motorola router and modem in one, and I can no longer connect to my airport

Under network preferences it says "AirPort is connected to MOTOROLA-D192D and has the IP address 192.168.0.3., but when I open airport utility, it says there are no airport devices within range for my computer (and the orange light it flashing on the airport).

ajboon wrote:
I assume you mean I need to connect the Airport to the modem using an ethernet cable?
Yes.
ajboon wrote:
Because trying to do it wirelessly is not working...
That's normal. If you want to "extend" a network, an Airport can extend only a WiFi created by another Airport, not a non-Apple device. The only wireless connection that you can make to the Motorola WiFi is a "join" for the purpose of providing an AirPlay connection.

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Looks like this is a known issue which has been fixed for Java 8:
https://javafx-jira.kenai.com/browse/RT-23328 "Mac: Impossible to use -splash:<image> with JavaFX 2.2 and JDK 7"

RE: eSATA express card/34 and External Hard Drive for MacBook Pro

I have a 17" MacBook Pro and do lots of movie editing. I need a fast external hard drive option to use. My internal is totally used up. Also need a back up drive.
I am a newbie and all of my info is based on googling. My FIRST QUESTION: Can I, and would it be a good solution, to use an express card 34 such as, Sonnet Tempo or Firtek SeriTek/2sM2-E with an external hard drive such as SeaGate 500GB or 300GB.
QUESTION 2: Why do so many of the SATA hard drives come without a case or enclosure?
And QUESTION 3: Does anyone have any recommendations or experience with the express card/34 and SATA external hard drives.
Thanks alot,
Jill Rand
And please, don't hesitate to tell me I am nuts...because I am peicing this info together without any experience at all.

1. Yes, eSATA would be a good choice for an external enclosure with a SATA drive. Alternatively, you could use Firewire 800, but it's mostly a matter of choice.
2. SATA drives a primarily used in desktop machines. SATA capable enclosures have made them usable outside of desktops.
3. I can tell you from experience to get an enclosure with a good chipset. It makes all the difference in the world. Oxford is very good for firewire. Cypress AT2+ and Prolific 3507 are excellent for USB 2.0.
I have a case with the new Oxford 924 chipset (eSATA, FW 800, FW 400 & USB 2.0) and couldn't be any happier. An added bonus; it acknowledges OS commands to power down on inactivity. Link: http://www.cooldrives.com/esata-firewire-800-enclosure-case-external.html

Final Cut Express keeps stopping and saying "Too many files open"

Final Cut Express keeps stopping and saying "Too many files open". I don't see how this is the case as I only have the one project open...

Try here:
http://www.fcpbook.com/Misc1.html
Al

Can i use sql server express 2008, 2012, and 2014 for commercial purpose?

Good day,
I saw that the sql server express 2005 can be used for commercial purpose without buying additional license
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8df18025-fc2b-43c2-8476-532336ff09e3/sql-server-express-for-commercial-use?forum=sqlexpress
the question is can I do the same for sql server express 2008,2012, and 2014?
can I install and use sql server express 2008, 2012 and 2014 on an azure vm? specifically
http://azure.microsoft.com/en-us/pricing/details/virtual-machines/
A0 instance
just an off topic question, is it required to pay to use sql server on virtual machines?
why is there a different pricing here
http://azure.microsoft.com/en-us/pricing/details/virtual-machines/#Sql

Hello,
Yes, you can use all versions SQL Server Express for commercial use. Please read more resources about it.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/01dbc5c3-b5fe-42d4-9eb9-91683cf8285b/can-any-commercial-application-that-uses-sql-server-express-freely-redistribute-the-sql-server?forum=sqlexpress
https://social.technet.microsoft.com/Forums/en-US/661ebf2e-ff2f-4dae-a8ae-e2179a764c09/sql-server-2012-express-in-commercial-product?forum=sqlexpress
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Can i do Expression to keyframes and smooth via script?

hi guys, who know AE scripts can translate expression to linear keyframes via script(now i use app.executeCommand(app.findMenuCommandId("Convert Expression to Keyframes")) ; command) but , for Comman work i must select every time property of layer(opacity, position, scale, etc) where i have expression.... but i need translate very many layers, i always click on property with expression and then do Convert Expression to Keyframes its to long.., can i do something like this
for (var j= 0; j<selectedLayers.length; j++)
                   var SelLaye= selectedLayers[j];
                   if (SelLayer.transform.opacity.expression!=null && (SelLayer.transform.opacity.expression!=null) && (SelLayer.transform.opacity.expression!=null)) //check if layer have expression
                         SelLayer.transform.position.select=true; //and here i need set cursor to position, expression, etc, where i have expression and translate to linear kayframes(but i dont know how)
                         app.executeCommand(app.findMenuCommandId("Convert Expression to Keyframes")) //do translation
                         SelLayer.transform.rotation.select=true;
                         app.executeCommand(app.findMenuCommandId("Convert Expression to Keyframes"))
                         SelLayer.transform.scale.select=true;
                         app.executeCommand(app.findMenuCommandId("Convert Expression to Keyframes"))
                         //and after this also need do a smoother or something like this for decreasing linear keys for max(because app.executeCommand(app.findMenuCommandId("Convert Expression to Keyframes")) create to many keyframes)
sorry for bad English

Sup,
Earlier Dan Ebberts already wrote the answer on CreativeCow:
http://forums.creativecow.net/thread/227/13039#13041
Можно все выбранные значения добавить в массив и потом уже дергать из оттуда, ну либо вручную прописывать в скрипте. Кому как больше нравится.
AE has "Smoother" panel, but as far as I know you can`t access it via scripting using app.executeCommand(app.findMenuCommandId("Smoother")) or something.
But there is a script that makes same work , called Smart Baker. You can download it here:
http://www.creatogether.com/ctg-smart-baker

I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

I am using a macpro 12 core computer
I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

You can have them both on the same computer as I and many others have done for years.
Just go ahead and install FCS 3 normally.
There will be absolutely no problems.

American Express Transaction Loader and Validate program error

I am working on AMEX integration with iexpenses. When I run the American Express Transaction Loader and Validate program, Cocurent program run with an error:
header and tailor do not have same report create date. submit this request again with the correct data file from American Express
Any suggestions?
Thanks,
Pradeep

Thank You. I tried to implement this functionality ( American Express Transaction Loader and Validation Con prog) by seperately running loader and validator
1.e 1.American Express Transaction Loader 2. Credit Card Transaction Loader Program. I could able to run them successfully. I could see some new credit cards
(which are in the data file) and assign them to employees through Internet Expenses Setup and Administration Responsibility -> Internet Expenses Administration -> new Accounts Tab
But, When I login throgh that employee, I could not see the transactions in the Iexpenses resposibility. Where can one see his transactions? Is there any iexpnses user guide available for R12?
Thanks.
Pradeep

Express, motorola sbg900 and g3

Similar Messages

Maybe you are looking for