Express Vi "Unable to view properties"

I'm trying to create an express vi, but when I go to drop it on a block diagram I get the error: "Unable to view properties". I've seen the online document
"Placing an express vi causes 'unable to open properties' error" (http://digital.ni.com/public.nsf/allkb/9d2d226bb343372886256d6e007521f5
Rebooting does nothing, and I've tried the vi on multiple machines, so it isn't something wrong with a particular installation or vi.lib. I've looked through the vi hierarchy and didn't see any vi's that might have conflicting names as anything in the vi.lib\express\express shared folder.
Any suggestions?

Interesting. It was not what I expected.
In editing your Config Page VI, it looks like you (probably accidentally) deleted an indicator that came with it. There's nothing special about it other than its type, direction, name, and connector pane connection though, so it should be easy enough to fix. It is required for the config page to launch, however.
On the main config page VI, do the following:
Scroll down a bit to part that won't be visible to the user.
Drop a new boolean indicator, I'd suggest a Round LED.
Name this indicator "Data Valid".
Connect the boolean wire coming out of your main event loop (indicates the OK button was pressed) to your "Data Valid" indicator.
On the front panel, right-click the icon in the upper-right and "Show Connector".
Connect your "Data Valid" boolean to the unwired terminal.
Save the VI.
That should get you up and going, good luck!

Similar Messages

"Unable to view properties" Does someone knows how to fix it ?

Hello,
I am student, and during my internship I have to learn and use Labview.
I work on a Macbook (mac os X snow leopard 10.6.2).
I downloaded and install the latest version of Labview, in evaluation mode. At the beginning, everything worked very well, no problems and one day (I don't know why it happens ...) I experienced this trouble.
When I create a new blank VI, on the block diagram, right click, Express< Signal Analysis < Tone measurement,
So I put this one on the block diagram, and I get this error : "Unable to view properties".
When I try to open properties window (by double clicking on it), it's the same error.
And I get the same errors for all Express modules (except "Simulate signal" and "Create histogram") but only for the express modules.
I had read some forums about this problem, I give you their links :
http://forums.ni.com/ni/board/message?board.id=170&message.id=441921&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&message.id=222281&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&requireLogin=False&thread.id=189243
For the second link, I can't try this solution because I have not found my Config page ...
Thank You
(and sorry for my english)

Yeah, I found any information in the Read Me document about uninstalling. But I found this on the web :
"To uninstall LabVIEW 2009, run the Uninstall.sh shell script file on the installation CD from a Terminal shell. The script prompts you to remove the files necessary to uninstall LabVIEW. If you want to keep any files you modified or added to the LabVIEW 2009 directory, save those files in another location before uninstalling LabVIEW 2009."
(at this location : http://www.ni.com/pdf/manuals/371778e.pdf )
The problems is that I have not the uninstall.sh file on the evaluation cd (I've done a research within it). I guess it's because it's a evaluation version...
I will ask my university to get their DVD, I have already their license number.
If someone who have a mac version can send me this file, it will be fix my problem.

Unable to view properties in DRM

I created a property named 'Status' of localnode with 'Defined' property type. I added this to Essbase Property category. I was unable to view this property in DRM UI. Where as I can view this property in DRM database. Anyone can help me on this?

open a node and then see the property. You will be able to see..
have you defined any node types?

Unable to view "Properties" for Spartan launch icon.

Build 10049 ... minor nit ... glitch
When I right-click on the pinned Spartan Quick Launch icon, I seen the normal three choices:
Project Spartan
Unpin this program
Close this window.
However, when I right-click on the top choice (Project Spartan), the expected "Properties" doesn't appear, but only the "Unpin" and "Open". That is different from pretty much every other shortcut I have experience with. On my
10049 Build, 21 of 22 Quick Launch icons can display "Properties" .... Spartan being the lone exception.
As Expected?
I was able to create Desktop icons for Spartan.exe with the "New Shortcut" mechanism, and also the "Drag from File Explorer to the Desktop". For those shortcuts, Properties was easily available.
More oddness: None of the files Spartan.exe or Spartan*.exe would actually start Spartan. When I did try to launch Spartan_broker.exe, I got an error message about "Cannot verify digital signature".
And more oddness ... when I clicked the "Submit" button for the above edit, Spartan crashed, with a new entry in the "Event Viewer". Fortunately, the contents weren't lost. Whew.
Rather than add to this post, I started a new Post:
https://social.technet.microsoft.com/Forums/en-US/c7e566ec-2620-4a9c-afdf-9d8f2f702a72/spartan-crashed-when-attempting-to-submit-edit-to-technet-post?forum=WinPreview2014General

Build 10049 ... minor nit ... glitch
When I right-click on the pinned Spartan Quick Launch icon, I seen the normal three choices:
Project Spartan
Unpin this program
Close this window.
However, when I right-click on the top choice (Project Spartan), the expected "Properties" doesn't appear, but only the "Unpin" and "Open". That is different from pretty much every other shortcut I have experience with. On my
10049 Build, 21 of 22 Quick Launch icons can display "Properties" .... Spartan being the lone exception.
As Expected?
More oddness: None of the files Spartan.exe or Spartan*.exe would actually start Spartan. When I did try to launch Spartan_broker.exe, I got an error message about "Cannot verify digital signature".
Hi,
I have the same result as your in my Windows 10 Technical preview, this is the default design for Spartan, and seems this design remains in the latest 10061, please submit a feedback in Spartan about this.
Thanks for your report.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable to view properties of User Informaton List in SharePoint designer

Hi
I am not able t view the user information list properties in SharePoint designer. I am able to view the catalogs folder and when I right click the user list to view the properties, I am getting the SharePoint Designer cannot display the item.
Can someone please assist me ? The sharepoint server is on my machine

Hello,
I believe this is default behavior in designer. You can just try with powershell script to see the properties: (see last comment)
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/6504727e-8b8d-403c-81f9-cab4518a8e9d/user-information-list-properties-not-showing?forum=sharepointcustomizationprevious
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help <br/>(On vacation from 16th Oct to 28th Oct 2014)

Instrument I/O assistant error msg "Unable to view proterties"

Hi, NI's AE,
I have re-installed many times NI LabView8.2(EV) + DAQmx8.3 on all
in one SOC platform(X86) with WinXP(SP3) step by step, but all
rebooting fail after DAQmx8.3 installed.
Then I re-install pure WinXP(SP3) + LabView8.2(EV) + DAQmx8.9,
rebooting ok.
LabView simulated VI from template works well, however I got error
"Unable to view properties" when I drag & drop "DAQ Assistant"?
After google the related issue of "Instrument I/O Assistant error".
I check the "Add/Remove S/W List" and "System Services" of window,
everything seems ok.
Attach file description :
    Add_Remove_List.jpg -
        No extra software installed, except NI's S/W.
    Add_Remove_NI_List.jpg -
    The key drivers, NI Instrument I/O Assistant & NI-VISA 4.0 &
        NI-488.2.2.46 all be installed well.
    NI Service List.jpg -
        NI's related service be well active.
    Instrument IO Assistant - Unableto view properties error.JPG -
        Drag & drop "DAQ Assistant" VI, popup error dialog box
        "Unable to view properties", not "Create New Express Task"
        form.
Is there any compatible issue between LabView8.2 & DAQmx8.9 ?
B/R
Hank

Sorry, forget attach file!
Attachments:
Add_Remove_List.JPG ‏99 KB
Add_Remove_NI_List.JPG ‏132 KB
Instrument IO Assistant - Unableto view properties error.JPG ‏77 KB

Unable to view Single Source WebHelp properties, how to correct?

I am unable to view my Primary Layout single source webhelp properties in RH9. Several of the single source layout icons have "?" marks on them. How do I correct this? Thanks.

Hi Folks
If you ever noticed, the question mark is more of a standard symbol for "Help". Because RoboHelp is a help authoring tool, many of the icons sport a question mark. As Willam indicated, it doesn't mean that something is amiss, unfinished or undefined. Instead, it is simply the icon that represents the layout.
If you look in your Windows file system at any CHM file (a standard Windows help file) you will notice that it too has a question mark.
And the older WinHelp (.HLP) format (Pre-Windows 95) was a blue circle with a question mark:
Cheers... Rick

Unable to view the map in Topology

Hi Team,
Problem: In the NNMi console i am unable to view the map of container.
out of 10 container 9 are working, but 1 is having problem.
The error i am getting is " Could not compute the map view response due to exception"
Regards,
Prashanth

You probably have restricted access to the file. Check if the drive is ntfs. If the os user is in administrator group, you can give permissions in file properties.

Unable to view the contents in NQS Config file

Hi Forum,
After I successfully install the OBI EE 10.1.3 Application, I am unable to view the contents in NQS Config file. It is opening in Notepad with error showing as "The filename, directory name or volume label syntax is incorrect."
So please guide me in resolving this issue.
Regards
Cool j

You probably have restricted access to the file. Check if the drive is ntfs. If the os user is in administrator group, you can give permissions in file properties.

Unable to view homepage in crs

hi,
I am unable to view home page in crs . Even i check scenario & slot section in Acc ,homepage folder all scenarios are enabled .kindly suggest some points

You need to change the defaultSiteId in /atg/multisite/DefaultSiteRuleFilter.properties to your new site id.
Also if you are using more than one sites then put their entries in
/atg/multisite/URLPatternMatchingRuleFilter.properties as follows
URLs=\
local.site1.com:8080=yourSite1,\
local.site2.com:8080=yourSite2
Hope this helps.
Thanks

Unable to view the billing document created through vf01 tcode

Hi,
i'm unable to view the billing document which was created through vf01. when i want to display the document through vf03 it say document not created. As an abaper i'm not able to find any error..
Is there any configuration missed by the fn guy.

Hi,
While you are saving billing document i think you got Express document (please check in Transaction code SBWP :- Business work place of particular user). As per me the number range has completed for the particular document type(might be excise invoice also, if u have excise invoice auto generation functionality) that is why system is not able to update the invoice.
Hope this will be helpful
Regards
bvdv

Unable to view direct editing

Hi Team
Unable to view direct editing in the Um managent
please guide me through the steps to activate it
Thanks
Madhu

Hi Madhu,
In EP 7.0 the Direct Editing has been removed and the same can find in config tool.
Login into Config Tool, Select Server --- services --- com.sap.security.core.ume.service and then edit the properties accordingly which requires portal restart to reflect it.
Check it once and do let me know if you have any clarifications
Cheers
Venkat

Unable to View .mod files in Photoshop Elements 11, can see they are there but no picture, I import them into Premiere and all OK ?

I have hundreds of .mod files which are supported but I am unable to view them on my Adobe Photoshop Elements 11. I cant see the picture icons as pictures or see the vision when i select them? I am running the latest Windows 8.1 PC with heaps of Ram and memory. If I import the files into Premiere they play fine?

Thanks Curt and 'Mylenium'
I did re-set the prefs - but to no avail
I checked and my graphics driver and audio is all up to date.
No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
Cliff

Unable to View Data in the table of a CDC enabled Data Store.

hi all,
I am trying to import some tables from the external metadata from my CDC enabled datastore, but after importing the tables i m unable to view the data in the table,
where as the same table in a normal datastore (Without CDC) is showing data in the Desginer.
Can anyone help me out???
is there any settings which we need to do, to see the data in a CDC enabled DS.

any help ????

Unable to view streaming video

I could view a streaming video using following address rtsp://138.133.71.2:554/file/ when using Quicktime 6. However, I have upgraded to Quicktime 7 Pro and I am now unable to view the streamed video. I am using Windows 2000 on a PC and streaming the video from a camera through a DSP Board to the PC. (The PC is not connect to the Internet)

Download the Flash Player Uninstaller and Flash Player Plug-in (All other browsers) by right clicking and selecting "Save Link as".
Close Firefox.
Run the uninstaller.
Run the installer to replace the plugin.
Open Firefox and click Tools>Add-ons.
Check under Plugins that Flash Player is "always activated".
If it still won't load, check your other plugins. There may be an ad blocker that's preventing it.

Express Vi "Unable to view properties"

Similar Messages

Maybe you are looking for