Express vs Standard Edition One

Is there much difference between the Express Edition and Standard Edition One single cpu? I built a web application using mod_plsql. In load testing the application it works fine with this configuration:
- 1 hyper-threaded CPU 3 MHz xenon
- 1 gig SGA
- Total datafile size is 3G
I was planning on turning off hyper-threading and buying a single cpu SE1 license, however after looking into XE it may be possible to save $5000.
In testing I am using 10gR1 EE with the Companion CD for apache / mod_plsql functionality.
Can XE can do:
- mod_plsql on port 443 (https)
- UTL_HTTP.SET_WALLET for https request on port 443
Is the Companion CD also free?

Brian,
I built a web
application using mod_plsql. In load testing the
application it works fine with this configuration:
- mod_plsql on port 443 (https)See this thread for configuring the Apache for https in front of an XE installation: HTTPS with Oracle XE ?
Porting a mod_plsql application to XE should definitely work in general.
Here are the exceptions to the rule we have experienced / discussed in this forum so far:
1) there might be a bug in the htp.init function (as of the beta release)
htp.init throws exception
If you don't clear the htp buffer between calls, you should be fine.
2) Authentication by CustomOwa is not supported and you need a different way of authenticating your users: DBMS_EPG DAD authentication using CustomOwa
Here is another helpful thread on configuring the DADs:
Using DAD's without specifying a password
Regards,
~Dietmar.

Similar Messages

  • Installing Standard Edition One

    Hi,
    I was asked to test SE1 in order to see if it fits certain requirement. In order to do so I choose one of my RH 4.0 boxes and downloaded the database for the Linux 64 bits. Then I began installing.
    However, when I was asked to choose the Installation Type I only had 3 options:
    Enterprise Edition, Standard Edition and Personalize.
    My questions:
    1- Where are the Standard Edition One and the Personal Edition options?
    2- Is it possible that the Standard Edition One is the same installation as the Standard Edition and the only difference is certain hardware constraint (as seen @ the license documentation)?
    Any help will be appreciated.
    Best regards.

    Unfortunately, patches can cause that to change.
    See Metalink Note:219233.1
    You're correct, they can do that, but on the more
    recent versions, if you're really careful in
    following the patch instructions they typically
    don't.
    Though in all fairness 10.2.0.1 => 10.2.0.2 is a more recent version (see bug 5100038).
    This sort of thing repeatedly happens sadly with Oracle and SE. Oh and the fix noted in 219233.1 doesn't apply to windows either.
    So, to the OP, there isn't any really nice way of determining that you are running SE or SE1, you are looking for an absence of the word Enterprise - and that might be wrong because of a bug. I don't believe Express Edition identifies itself nicely either, but you can tell you are running that because it installs properly using appropriate installation media (windows installer or an rpm).

  • OBI Standard Edition One (10.1.3.2.1) Database Error

    Hi Guys!
    I installed OBI Standard Edition One (10.1.3.2.1). In that BI Admin tool, Presentation services were installed properly. But i have problem in OBI Standard Edition One database it is not installing properly. While installing i didn't get any error message but in start menu i can't able to find any oracle home folder, no oracle listener. The sample reports i opened in dashboard all reports showing TNS error message.
    Can any one tell what is the problem how to solve the problem....

    Ya i'm having but what about OBI Standard Edition database? i want to see the OBISE one inbuilt tables! How to fetch the default schema?

  • Standard Edition One Processor Licensing

    Hi
    I'm trying to get to the bottom of the licensing for Standard Edition One (and also Standard Edition). I have the processor license prices, but am not sure if we need to apply core factors as we'll be using a single multi-core processor.
    The oracle pdf of database licensing states the following:
    "+When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket;+"
    So does this mean if we have a single socket quad-core cpu we don't need to apply the core factors???
    Any guidance greaty appreciated, the more I dig around on the Oracle site, the more confused I get!
    Regards
    John

    For SE and SE One, the licensing is based on sockets. For SE, you can have a maximum of 4 sockets. you do not need to take the core factor into consideration for this. The core factor only applies in Enterprise edition. For SE One a maximum of 2 sockets can be used. Please see the following link for more information:
    http://www.google.com.au/url?sa=t&source=web&ct=res&cd=1&ved=0CAkQFjAA&url=http%3A%2F%2Fwww.oracle.com%2Ftechnology%2Fproducts%2Fdatabase%2Foracle11g%2Fpdf%2Fdatabase-11g-product-family-technical-whitepaper.pdf&ei=sXN0S9SoGM-LkAXDnM2fCg&usg=AFQjCNH3B8mAspwGPF0hI-8R72XrRYw9Uw&sig2=G8YSAAIi5WWbtL4HoKwG3A

  • Standard Edition ONE and Advanced Installation

    Hello,
    I would like to perform an installation of the Oracle DB 11g Standard Edition ONE by using the Advanced installation. However, the Standard Edition ONE option is not available in the Advanced installation.
    Can I use the Standard Edition option?
    How can I proceed?
    Thanks!
    :)

    Nathan Morgan wrote:
    I have installed SE1 many times by clicking the SE option on the installer page. There is no SE1 option. From the point of view of the database installer SE1 and SE are identical. The software components are the same. The limitation in the licence agreement is that SE1 is restricted to a single machine with maximum capacity 2 sockets (2 n-core processors) -but- SE can be installed as a multple node RAC cluster with a maximum total capacity of 4 sockets (4 n-core processors). For example, see Oracle® Database Licensing Information 11g Release 1 (11.1) Part Number B28287-08
    I AGAIN referenced that document. And again I do not see anything in the Licensing document that says you INSTALL SE1 by selecting SE. I see a lot of references to the fearture comparison. So I ASSUME that the installation is by selecting SE and using moral control over how it is deployed.
    Could you please copy/paste the paragraph that turns it from assumption to fact ..

  • How to setup replication using Oracle 11gR2 standard edition one

    Dear Guys,
    I have two machines on which Oracle 11gR2 standard edition one is installed. I want to establish replication between them. How can I setup it? Please refer me to some step by step guide. I will be thankful to you guys.

    Replicating Data Using Materialized Views
    http://docs.oracle.com/cd/E14072_01/server.112/e10703/tdpii_reppit.htm#BEHHGGIB
    Replicating Read/Write Data Using Materialized Views
    http://docs.oracle.com/cd/E14072_01/server.112/e10703/tdpii_reppit.htm#BEHCEFGC

  • Help using Oracle BI Standard Edition One

    Hi,
    I have installed Oracle BI Standard Edition One on a Windows Server 2003.
    My aim is to connect to the production database and create reports, graphs etc.
    Could you please let me know the steps required?
    Thanks & Regards,
    Shailaja

    Check documentation at http://download.oracle.com/docs/cd/E10352_01/doc/nav/portal_1.htm
    Business Intelligence Standard Edition One Tutorial

  • Advanced queue in Oracle9i Standard Edition One

    Hi,
    Is advanced queuing available in the Standard Edition One for 9i?
    Thanks,
    Gloria

    Hi!
    i think, that the SE One is only an edition for 10g. in 10g and 9i advanced queuing is included in every available edition. Please refer to:
    http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family_0104.pdf
    and
    http://www.oracle.com/technology/products/oracle9i/pdf/9idb_rel2_prod_fam.pdf
    hope tat helps
    André

  • Create standby database on 11gR2 standard edition one

    Hi experts,
    i want to create standby database on 11gR2 standard edition one on both environment linux to linux and window to window. i have invested my 4-5 days on that but i didn't able to create, due to standard edition. plz provide me step by step creation. it wil bel great help.....
    Thanks and Regards
    Sanchit Gupta

    SANCHIT GUPTA  wrote:
    Hi experts,
    i want to create standby database on 11gR2 standard edition one on both environment linux to linux and window to window. i have invested my 4-5 days on that but i didn't able to create, due to standard edition. plz provide me step by step creation. it wil bel great help.....
    Did you have a look at the dataguard docs,
    http://docs.oracle.com/cd/E11882_01/server.112/e10700/standby.htm#i72073
    Which has this mentioned quite clearly,
    >
    Oracle Data Guard is available only as a feature of Oracle Database Enterprise Edition. It is not available with Oracle Database Standard Edition.
    Note:
    It is possible to simulate a standby database environment with databases running Oracle Database Standard Edition. You can do this by manually transferring archived redo log files using an operating system copy utility or using custom scripts that periodically send archived redo log files from one database to the other. The consequence is that this configuration does not provide the ease-of-use, manageability, performance, and disaster-recovery capabilities available with Data Guard>
    So if you want to have data guard, use Enterprise Edition.
    Aman....

  • Downgrade enterprise edition to Standard Edition One

    I downloaded database 11g for solaris intending to install standard edition one.
    During the install I did not see any options for the edition, and installed enterprise edition. I then deinstalled enterprise edition options but the database banner is still indicating it is enterprise edition. Is it possible to downgrade to standard edition one ? Where should I have selected the edition during the install ?

    The Standard Edition One install is assumed to be the same as the Standard Edition install since it contains the same features. You are on your honour to not enable the RAC capability or to install it on a machine capable of more than 2 CPU sockets. You should have seen the option to install Standard Edition.
    See metalink note 139642.1

  • Is OAS Standard Edition One license is enough to use OC4J Standalone?

    Hi,
    I would like to purchase a license for OAS SE One, but the latest version is 10.1.2.
    OC4J 10.1.3.4 suits better for my application. Can I use it with OAS SE One license?
    Bart

    BI SE one is restricted to one RDBMS data source.
    2.2.1 Oracle BI Standard Edition One usage
    You can install Oracle BI Standard Edition One on a machine with up to two CPUs, and it can serve from five to 50 users. Oracle Warehouse Builder can pull data from any source, but the target database is limited to the included Oracle Database. Oracle BI and Oracle BI Publisher data sources are limited to the included Oracle Database, exactly one other database, and as many flat file data sources (for example, spreadsheets) as you require.

  • How to install Standard Edition One?

    I downloaded 10g (10.2.0.1) for Linux x86 and it says it contains Enterprise, Standard and Standard Edition One inside. Once I started installation I had option to install Enterprise or Standard, no option for Standard Edition One.
    Did I miss something?

    Standard Edition One IS the STandard Edition with an added moral obligation to not out it on a machine with more than 2 sockets.
    Just use the SE install

  • 10 Standard Edition One

    Hi,
    Where do I get this from?
    The 10.2.0.1 download page only includes Standard and Enterprise Editions.
    The 11g version has all products selectable from the dropdown on the install screen.
    The 10g version does not have Standard Edition One listed.

    I see no difference on the download page:
    Oracle Database 11g Release 1
    Standard Edition, Standard Edition One, and Enterprise Edition
    Oracle Database 10g Release 2
    Standard Edition, Standard Edition One, and Enterprise Edition
    Additionally SE,SE1 and EE are licence options,not separate software packages. In all cases you downlaod the SAME software.
    Werner

  • About Standard Edition and Standard Edition one

    Good day people.
    I 'm not sure if this question has been asked, excuse me if I haven't noticed it.
    Where I currently work are planning the implementation of an software running over Oracle DataBase, but they are unsure for which DB version to choose.
    1. What are the main differences between Oracle Standard Edition and Oracle Standard Edition one? (besides that the second doesn't support RAC or clusters.)
    2. I am still unsure if license for processors are counted as processors or cores, for instance 1 processor with 4 cores (means 1 processor? or 4 processors or a factor multiply)?
    3. Is it true that EVERY license I buy MUST have 1 first year as support?
    And 4. Is Windows Server 2008 supported? (64bits)
    Gracias, a lot.

    Hi;
    Firstly for license its better to contact wiht your local oracle sale representative which you can get exact answer.
    1. What are the main differences between Oracle Standard Edition and Oracle Standard Edition one? (besides that the second doesn't support RAC or clusters.)Please see below:
    http://download.oracle.com/docs/cd/B28359_01/license.111/b28287/editions.htm#CJACGHEB
    2. I am still unsure if license for processors are counted as processors or cores, for instance 1 processor with 4 cores (means 1 processor? or 4 processors or a factor multiply)?See:
    Licensing-Oracledb
    Query Regarding Oracle Installation
    Oracle Licensing
    Re: Licensing Technology
    3. Is it true that EVERY license I buy MUST have 1 first year as support?Yes
    And 4. Is Windows Server 2008 supported? (64bits)What is DB version?
    Check certification matrix and also see:
    Master Note For Oracle Database Server Installation [ID 1156586.1]
    Regard
    Helios

  • BI 11G Standard Edition One: can the iOS client work with it?

    Is it possible to run the iOS (iPhone/iPad) BI client with BI 11G Standard Edition ONE? Anyone tried?
    Thanks a lot in advance

    nonsense - if you have only 2 sockets (include the multi-chip factor when calculating the number of sockets -- see my posting) and not using the rest of the sockets and your motherboard allows it - it should be no problem in licensing. The problem arises if your socket count goes more than 2 by installing another CPU -- then you need to upgrade to the proper Oracle license.
    remember, if this is a Linux box, and you installed a single (1) dual-core CPU (AMD or Intel Xeon for example), then the socket count is 1x2x0.5=1 socket (you are paying single processor license for SE1), if you install another dual-core CPU, then your socket count becomes 2 (which is the max # of sockets for SE1) and you pay 2 x processor license. if you install another dual-core CPU, then you have 3 sockets and you need SE license (3 x processor license for SE for the same box).
    note:
    ===============
    apparently, when it comes to SE1 and SE licensing, the MCM (Multi-Chip-Module) definition becomes extremely important. If it is a Power 5 cpu, it is definitely an MCM, for AMD Opteron Barcelona CPU - it is not MCM. For Xeon, yes it uses MCM but the word is that when some folks called their Oracle Sales rep, they were told it is not MCM (even Intel said, it utilized MCM technology for that particular Xeon CPU). I guess it depends what your Sales rep tells you or what your research reveals for the CPU you are planning to use. Here is a related URL, for those who interested:
    http://www.pythian.com/news/1009/recent-changes-to-oracle-se-licensing-rules-higher-price
    I wish there was a clear MCM definition in Oracle's OLSA (such as a table similar -- but more detailed -- to the newly updated core count table).
    hope this proves helpful.
    Zaf
    Edited by: zaferaktan on Jul 6, 2009 3:54 PM

Maybe you are looking for

  • Can receive but not send mail

    Because of buyout, had to switch over from Adelphia to Comcast this weekend. With the help of Comcast, reset Mac mail on both G4 and G3 running OS 10.4.9. Got everything finally working Sunday, but today, G4 will not send. Error: "Message could not b

  • Transferring PDF to android and reading on android

    How do I download a PDF file from my computer and then open it on my android with the adobe reader?  I can move the file to the phone, but don't see how to open it on the phone.

  • Simple logic for the code

    HI All,       Please expalin the logic behind the code and how can we put it simpler this logic by reducing the number of lines of the following logic FORM fisical_period.   data : l_start_month like v_start_month,          l_end_month like v_end_mon

  • Contact request spam

    So, i keep geting the this person i dont even know trying to add me on skype. And each time i go to block the person they keep creating new accounts to add me on. I dont know what they are trying to acheve.

  • SEEBURGER REQUIREMENT

    Hi All, I have a scenario which involves transfer of EDi files it is a B2B scenario where files need to be transferred from customer ERP to Customer VAN and from there it should be transffered to XI how can it we acheive this ? Can we use Seeburger V