ExpressCache cannot find mSATA after working for some time

I have my T430s with 16 Gb mSATA for cache. After installing ExpressCache and making it work for some time, it suddenly cannot detect the SSD.
An usual solution is to reboot -> hear the annoying beep showing error 2101 -> login in windows -> Shut down -> Turn on the computer and it will work right way (although I haven't test how long it can work). Since it can work smoothly for some while, i don't think it's a hardware issue.
Please see how I can deal with this

Why do you need a 32-bit program?
You're on 10.6.8, so that means a Mac. Unlike with Windows, there are not separate 32- and 64-bit versions of OS X. You can run a 64-bit application like After Effects CS6 even if you're on a system old enough to only support a 32-bit kernel. So if you have an Intel-based Mac running 10.6.8 then AE CS6 should work fine.
Bob Currier
Synthetic Aperture

Similar Messages

I cannot find the WEP code for my Time capsule

Hi,
I'm trying to connect my work PC to the internet via my TC at home. Easy, I thought.
PC is running XP and is asking for a WEP key. I've looked at the support pages and cannot find out how to find the WEP key.
Can I?

Hi
If you assigned a password to access the wireless network then that would be the WEP key. If you did not assign a password it would not ask you for a WEP key it would simply connect and access the internet and the local network. Because it is asking for a password - which you should know? Then provide it. If you've forgotten it then simply use the Airport Utility to log into your TC and change it to something more memorable.
Tony

I got a new apple iPhone 6 today and the power button is not responding after functioning for some time

i got a new iPhone 6 today itself . i didn't put a sim in it. and after few start ups the power button stopped responding can anyone please help me with that

Take the issue up with whomever replaced the device, whether that is Apple or another company.
There is nothing that we, your fellow users, in these user to user support forums can do for you.

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

Still it could not find the data network.it searches for voice network instantly and works too. but even full voice network available, there is no data network.when i restart the phone it could find data network.
Already i reset network settings for two times.

Cannot access the iCloud mail for some reason I don´t know. Worked perfect until Nov 28th, but a message with "incorrect ID/password" popped up. Contacts and iCal is accessible. Have tried from iPad, Mac, iPhone and PC. Any recommendations?

Cannot access the iCloud mail for some reason I don´t know. Worked perfect until Nov 28th, but a message with "incorrect ID/password" popped up. Contacts and iCal is accessible. Have tried from iPad, Mac, iPhone and PC. Any recommendations?

Reset your password. Be sure your new one meets the requirements for length (8) and characters (at least one upper case and one number).

When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

Have used Aperture for some time - at some point this stopped working - not sure when
workflow:
click photo and elect to use the external editor (Photoshop Elements 9)
Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
Have to change the type to 8-bit in Photoshop to start making changes
When done and I exit I am prompted to save the photo
On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
Other Things:
I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
Current version of Aperture is 3.1.3, Elements is 9.0
Any help/suggestions greatfully received

Try using psd. Some rerports indicate some confustion between the apps with TIFF. See:
https://discussions.apple.com/message/15921933#15921933
I cannot confirm, nor test, since I use PS CS5, and not Elements.
Ernie

Printing doesn't work for some docs (CUPS 1.4, Samsung ML-2010, Splix)

I installed my Samsung ML-2010R some days ago. CUPS version is 1.4.2-1. Splix is 2.0.0-1.
After blacklisting lpusb installation worked fine. Also printing a testpage worked. Printing works for some documents, but there are some which won't (all were pdfs, but I mainly tested .pdfs). The document is sent to the printer (or at least it looks so), but nothing happens (sometimes the printer makes a short noise). When I go to http://localhost:631/printers/ it says "Frei - "Processing page 11..."" (while "frei" being German for "free", don't know, perhaps the corresponding status in English is idle). The page number changes depending on the document (but it is always the same page if I try to print the same document more times).
In the log-files I don't find anything useful (at least for me). Here is what I get, if I try to print one of these documents:
In page_log:
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:24 +0100] 1 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:24 +0100] 2 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:25 +0100] 3 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:30 +0100] 4 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:31 +0100] 5 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:31 +0100] 6 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:32 +0100] 7 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:32 +0100] 8 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:33 +0100] 9 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:33 +0100] 10 1 - localhost VO MMF.pdf A4 one-sided
In access_log:
localhost - - [12/Nov/2009:20:25:23 +0100] "POST /printers/Samsung_ML-2010 HTTP/1.1" 200 441 Create-Job successful-ok
localhost - - [12/Nov/2009:20:25:23 +0100] "POST /printers/Samsung_ML-2010 HTTP/1.1" 200 17565828 Send-Document successful-ok
In error_log there is nothing.
Perhaps you could help me with further debugging. I'll try the proprietary Samsung driver in the meantime.

EDIT: This didn't actually seem to fix the problem. :'(
Good news! I think the outstanding developers of Debian have a patch for our bug.
It involves recompiling CUPS, which in Arch means making new packages for "cups" and "libcups". I used the package build information for CUPS from ABS and created a new PKGBUILD. Here it is for reference:
pkgbase="cups"
pkgname=('libcups' 'cups')
pkgver=1.4.2
pkgrel=1
arch=('i686' 'x86_64')
license=('GPL')
url="http://www.cups.org/"
makedepends=('libtiff>=3.9.1' 'libpng>=1.2.39' 'acl' 'openslp' 'pam' 'xdg-utils' 'heimdal>=1.2.1-5' 'gnutls>=2.8.3' 'poppler>=0.10.7-2'
'xinetd' 'gzip' 'autoconf' 'php' 'libusb' 'dbus-glib' 'avahi' 'hicolor-icon-theme' 'patch')
source=(ftp://ftp.easysw.com/pub/cups/${pkgver}/cups-${pkgver}-source.tar.bz2
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/confdirperms.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/default_log_settings.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/dnssd-avahi.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/do-not-broadcast-with-hostnames.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/dynamic-default-ripcache-size.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/log-debug-history-nearly-unlimited.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/logfiles_adm_readable.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/pidfile.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/poppler-based-pdftops-fixes.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/ppd-poll-with-client-conf.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/ppdc-dynamic-linking.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/printer-filtering.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/quiesce-bonjour-warning.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/reactivate_recommended_driver.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/read-embedded-options-from-incoming-postscript-and-add-to-ipp-attrs.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/removecvstag.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/rootbackends-worldreadable.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/select_use_after_free.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/show-compile-command-lines.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/ubuntu-default-error-policy-retry-job.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/ubuntu-disable-browsing.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/usb-backend-both-usblp-and-libusb.dpatch
cups
cups.logrotate
cups.pam)
options=('!emptydirs')
md5sums=('d95e2d588e3d36e563027a963b117b1b'
'3ec4a323bfb2fb1f2f4803acaaa9a99d'
'b139625dcc54058a8ce7311f80d14ed5'
'8fef21a4691de602d0ce3abe06c727e5'
'f3dc31da89a90c85462b501a1ef05484'
'3001462cb25772fd33cf437e501e52a6'
'6f83bf175fde6a11b26ff1e585383cc9'
'59666bc716e34b61614bbe0cee388c92'
'81d35f73f56c709baac655ad24f1e10e'
'531b865d9a6fb02b2ddb29432b7238a1'
'25fa0289a46e613ab9f66b0b768e6e6b'
'e15d8fa01e657c387fdc9745a8ca4a98'
'6167d4a574f243888a5fba8132c747c4'
'd9b197a942308c22b42d2113063ee0c1'
'd6a229f40ff14c88d07db58c036c9fcc'
'd617f77aa89572464b32575e2caa8773'
'0fe2d8fa6eceeb6e52bac74eaf631a5d'
'1824bee0db35a4edcf56af5c928d8a80'
'38db9c9b997d2a768d89d900d131af47'
'6a4e46310b0e84230184715804f0b8c3'
'ad8634485cab37fbd81f56ada7ba55f5'
'a4b34f2843641bfe0856037581a34dd0'
'7c5053b96481e14879d4f5ea2a0c660b'
'5c85b7d8d2ddd02c2c64955cebbf55ea'
'f861b18f4446c43918c8643dcbbd7f6d'
'96f82c38f3f540b53f3e5144900acf17')
build() {
cd ${srcdir}/${pkgbase}-${pkgver}
# Apply Debian patches
patch -p1 < ../confdirperms.dpatch
patch -p1 < ../default_log_settings.dpatch
patch -p1 < ../dnssd-avahi.dpatch
patch -p1 < ../do-not-broadcast-with-hostnames.dpatch
patch -p1 < ../dynamic-default-ripcache-size.dpatch
patch -p1 < ../log-debug-history-nearly-unlimited.dpatch
patch -p1 < ../logfiles_adm_readable.dpatch
patch -p1 < ../pidfile.dpatch
patch -p1 < ../poppler-based-pdftops-fixes.dpatch
patch -p1 < ../ppd-poll-with-client-conf.dpatch
patch -p1 < ../ppdc-dynamic-linking.dpatch
patch -p1 < ../printer-filtering.dpatch
patch -p1 < ../quiesce-bonjour-warning.dpatch
patch -p1 < ../reactivate_recommended_driver.dpatch
patch -p1 < ../read-embedded-options-from-incoming-postscript-and-add-to-ipp-attrs.dpatch
patch -p1 < ../removecvstag.dpatch
patch -p1 < ../rootbackends-worldreadable.dpatch
patch -p1 < ../select_use_after_free.dpatch
patch -p1 < ../show-compile-command-lines.dpatch
patch -p1 < ../ubuntu-default-error-policy-retry-job.dpatch
patch -p1 < ../ubuntu-disable-browsing.dpatch
patch -p1 < ../usb-backend-both-usblp-and-libusb.dpatch
# Rebuild configure script for --enable-avahi.
aclocal -I config-scripts
autoconf -I config-scripts
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var \
--with-logdir=/var/log/cups -with-docdir=/usr/share/cups/doc \
--with-cups-user=daemon --with-cups-group=lp --enable-pam=yes \
--disable-ldap --libdir=/usr/lib --enable-raw-printing \
--enable-dbus --with-dbusdir=/etc/dbus-1 --enable-ssl=yes --enable-gnutls \
--with-php=/usr/bin/php-cgi --with-pdftops=pdftops --with-optim="$CFLAGS"
make || return 1
package_libcups() {
pkgdesc="The CUPS Printing System - client libraries and headers"
depends=('gnutls>=2.8.3' 'libtiff>=3.9.1' 'libpng>=1.2.39' 'heimdal>=1.2.1-5')
cd ${srcdir}/${pkgbase}-${pkgver}
make BUILDROOT=${pkgdir} install-headers install-libs || return 1
# put this into the libs pkg to make other software find the libs(no pkg-config file included)
mkdir -p ${pkgdir}/usr/bin
install -m755 ${srcdir}/${pkgbase}-${pkgver}/cups-config ${pkgdir}/usr/bin/cups-config
package_cups() {
pkgdesc="The CUPS Printing System - deamon package"
install=cups.install
backup=(etc/cups/cupsd.conf
etc/cups/mime.convs
etc/cups/mime.types
etc/cups/snmp.conf
etc/dbus-1/system.d/cups.conf
etc/logrotate.d/cups
etc/pam.d/cups
etc/xinetd.d/cups-lpd)
depends=('acl' 'openslp' 'pam' "libcups>=${pkgver}" 'xdg-utils' 'heimdal>=1.2.1-5' 'gnutls>=2.8.3' 'poppler>=0.10.7-2'
'libusb' 'dbus-glib' 'avahi' 'hicolor-icon-theme')
optdepends=('php: for included phpcups.so module')
cd ${srcdir}/${pkgbase}-${pkgver}
make BUILDROOT=${pkgdir} install-data install-exec || return 1
# this one we ship in the libcups pkg
rm -f ${pkgdir}/usr/bin/cups-config
# kill the sysv stuff
rm -rf ${pkgdir}/etc/rc*.d
rm -rf ${pkgdir}/etc/init.d
install -D -m755 ../cups ${pkgdir}/etc/rc.d/cups
install -D -m644 ../cups.logrotate ${pkgdir}/etc/logrotate.d/cups
install -D -m644 ../cups.pam ${pkgdir}/etc/pam.d/cups
# fix perms on /var/spool and /etc
chmod 755 ${pkgdir}/var/spool
chmod 755 ${pkgdir}/etc
# fix .desktop file
sed -i 's|^Exec=htmlview http://localhost:631/|Exec=xdg-open http://localhost:631/|g' ${pkgdir}/usr/share/applications/cups.desktop
# compress some driver files, adopted from Fedora
find ${pkgdir}/usr/share/cups/model -name "*.ppd" | xargs gzip -n9f
This makes new versions of the packages "cups" and "libcups". I installed them and my printer is behaving very well. The Debian/Ubuntu developers work miracles.
If you could try it, to see if it fixes your printer problems too, that would be great.
Here is where I got the patches from. http://patch-tracker.debian.org/package/cups/1.4.2-4 I applied almost all of them. I excluded the "drop unnecessary dependencies" patch because it brought compiler errors with the default Arch CUPS PKGBUILD, and also excluded the "man page" and "manual" patches. I think the only patch you and I actually need is the "usb-backend-both-usblp-and-libusb" patch, but I'm not really in the mood to try applying only that one, since it seems to be working fine now. I decided to ignore applying the Ubuntu CUPS patches, because they mostly seem to be simply patches to the way CUPS is installed. Anyway, I hope these patches are moved upstream soon!
If we have good results from this PKGBUILD, I think I will upload it to AUR. It will be my first AUR package.
Last edited by drcouzelis (2009-12-07 15:46:29)

HT204291 I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for

I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for Netflix streaming and don't know what to do. Any luck out there?

If you last used an Apple TV to mirror your device and have updated to the newest Apple TV software, go into settings and turn airplay back on. The icon should then appear on your iPad mini when you swipe up allowing you to disable it for Netflix. After updating my Apple TV software for some reason it turned airplay off.
Bob G

How can I find out what top level VI TestStand cannot find a sub-VI for?

I am trying diligently to build a TestStand deployment and keep getting errors. TestStand is telling me that an error has occurred because it cannot find a sub-VI in a certain path. The problem is it does not tell me what VI it cannot find a sub-VI for. It just gives me the path that it is trying to find the sub-VI in. Is there any way I can tell what top level VI in a sequence TestStand is trying to find the sub-VI for? Thanks in advance for any help.

Josh - I did not have any disbale diagram structures in the sub-VIs that were giving me trouble. Nor did I have any read only VIs. I mass compiled my entrire directory structure...twice. I had no choice but to go through every single sequence and open every VI. Once opened there were three that did not have the correct directory for a sub-VI and need saved. There were no errors due to a Labview mismatch. For some reason these three VIs did not save the sub-VIs new directory therefore causing trouble during my TestStand deployment build process. The thing I find odd about this is there are hundreds of other VIs that use these same sub-VIs in the same new directory that mass compiled fine. I am continuing my TestStand deployment build process and I will see how it goes from here. I definitely got further, after finding these three errros, than I have before. Thanks for the help.

SSRS Sharepoint Integrated Mode logs - Cannot find site lookup info for request Uri AND [Forced due to logging gap]

Hi,
Our reports run very slow in SharePoint Integrated mode. I look at the logs and I see that for one report request there are bunch of "Forced due to logging gap" rows. Is it some kind of a configuration issue or is it working as it should. Below
is the full log for one report request. I have no admin experience at all and I am confused what each one in the logs mean. I have made some of them in bold font as I suspect it is some kind of configuration issue there. Could you please help understanding
those logs?
Line 25: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://xxxxx.com:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Streaming/ProcessStreamRequest'
MessageId: 'urn:uuid:10b1c246-8c70-400b-9b62-fe0d87a2ae8c'
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 28: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SQL Server Reporting Services
Report Server WCF Runtime
0
Medium
Entering ExeuteCommand - Command = Render
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 29: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Authentication Authorization
agb9s
Medium
Non-OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 30: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
adyrv
High
Cannot find site lookup info for request Uri http://xxx:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 31: 07/29/2014 09:17:34.59
w3wp.exe (0x0A6C)
0x070C
SQL Server Reporting Services
Report Server Catalog
0
Medium
RenderForNewSession('https://xxx.com/xxx.rdl')
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 32: 07/29/2014 09:17:34.60
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Authentication Authorization
ajmmt
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.59, Original Level: VerboseEx] SPRequestParameters: AppPrincipal={0}, UserName={1}, UserKye={2}, RoleCount={3}, Roles={4}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 33: 07/29/2014 09:17:34.60
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
8acb
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 34: 07/29/2014 09:17:34.62
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
adyrv
High
Cannot find site lookup info for request Uri http://xxx:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 35: 07/29/2014 09:17:34.74
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.63, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 36: 07/29/2014 09:17:34.74
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
6t8b
High
[Forced due to logging gap, Original Level: Verbose] Looking up {0} site {1} in the farm {2}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 37: 07/29/2014 09:17:34.85
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Runtime
afu6a
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.77, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 38: 07/29/2014 09:17:34.85
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Runtime
afu6b
High
[Forced due to logging gap, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 39: 07/29/2014 09:17:34.94
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.88, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 40: 07/29/2014 09:17:34.94
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 103: 07/29/2014 09:18:05.55
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.96, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 104: 07/29/2014 09:18:05.55
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
6t8b
High
[Forced due to logging gap, Original Level: Verbose] Looking up {0} site {1} in the farm {2}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 105: 07/29/2014 09:18:05.62
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
6t8h
High
[Forced due to logging gap, cached @ 07/29/2014 09:18:05.55, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 106: 07/29/2014 09:18:05.62
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 107: 07/29/2014 09:18:05.62
w3wp.exe (0x0A6C)
0x070C
SQL Server Reporting Services
Report Server WCF Runtime
0
Medium
Processed report. Report='https://xxx.com/xxx.rdl', Stream=''
894aa99c-9fb3-c007-caf4-32ba68af9901
Thank you.

That is likely the case as native mode is quicker than SharePoint-integrated.
A couple of things to check, and perhaps change if you can:
1) Make sure the latest SSRS ReportViewer is deployed to the SharePoint WFEs. This does not have to match your SSRS deployment version. See http://msdn.microsoft.com/en-us/library/gg492257.aspx
for the compatibility table.
2) If possible, move SSRS to the same SharePoint servers that end users interact with (e.g. the "WFEs").
3) Make sure the underlying server hosting SharePoint has C-States disabled (these are Intel C-States, e.g. C1, C2, C3... aka processor sleep states). If the server has any sort of power regulation, make sure it is at maximum performance (rather than some
form of power saving).
4) Make sure the underlying Windows OS has it's Power Management set to Maximum, rather than any sort of power savings.
You can review the execution logs in the Reporting Services database. Take a look at the ExecutionLog3 view. Compare the TimeProcessing (time it takes to process the report) and TimeRendering (time it takes for the processed report to render to the end user).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

PageComposer Error - Cannot find the module necessary for printing C5051

Hi
Having some problems trying to setup a Windows 2008 R2 print server with shared Canon iR C5051 printer
I've created the printer, installed the 64 bit driver Canon iR-ADV C5045/5051 PCL6 v 20.90 and works fine for 64 bit Windows 7 clients, installed the 32 bit driver by selecting printer properties, sharing tab, additional drivers and selecting x86 and pointing to the 32 bit PCL driver. Driver installs fine on the print server without any errors.
Goto 32 bit client, add printer, select the shared printer from the printserver, printer installs Ok. When the user however tries to print, get the error:-
Canon PageComposer
Cannot find the module necessary for printing
Re-install the printer driver
I've done this countless times, any idea's on how to fix ?
Thanks

Where is the code you posted? Running in a separate project, I assume? Does that project have a dependency on the project containing the app module specified?
And just to check (although by default, JDev should do this for you)--the app module project has been compiled since adding the configuration, right? You need to check to make sure the config exists not only under Project/src, but under Project/classes.
Edited by: Avrom Roy-Faderman on Oct 6, 2008 2:02 PM
Oh, and BTW--I assume this is not a typical ADF application, right? In a standard ADF application, you would very rarely need to instantiate an application module in code like this; you could just let the data binding facility do it for you. The technique like the one you're using is most appropriate for purely programmatic, no-UI cases. (e.g., once I tried to implement an SMTP server backed by business components. That was an appropriate case for ditching databindings and doing the sort of thing you're doing, because it had no view layer (because it had no UI to render).

My iMessage doesn't work for some with iPhones

WWhy does iMessage not work for some thst have iPhone? For example day 1 text went as iMessage day 2 changed to sms

Hi,
1) That iPhone may not be registered with the iMessages Servers.
Several variants of that:-
2) the iPhone has lost power/is out of range and been "de-registered".
3) Twice my iPhone has become set to Not Receive on the iPhone Number - the User cannot change this - but it has happened. After a while if this is not spotted it loses the link with the Apple ID as well.
4) It is not entirely clear if you Block someone in iMessages whether the iPhone still gets SMS versions.
It appears you might have to block them for Phone (and therefore related services like SMS) as well as iMessages.
5) iMessages servers having a bad day.
9:39 pm Saturday; April 18, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

T500 turns off after cpu goes 100% for some time

I welcome all useful feedback on the issue - please do test your laptops if you can
my T500 turns off after cpu goes 100% for some time, that is just another issue?
happens both in windows and linux
edit : it cannot be from dust - I remember this happened occasionally even it was brand new

This makes the fourth post to say: CLEAN OUT YOUR FAN.
So...
CLEAN OUT YOUR FAN.
Some compressed air does the trick. You can find the disassembly instructions here:
http://www-307.ibm.com/pc/support/site.wss/MIGR-70068.html
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Quicktime working for some but not for others

Hello all,
I'm developing this website and it displays videos in quicktime format, but it's just not working for some people... It just won't play for some reason I just don't know 'cause I couldn't make the error happen to me and got no good help from others...
This is what's happening: @ www.thebrooklynbrothers.com/ clicking on "work, work and more work", then clicking on MEDIA and then FILM, it should display the QT movie and the user could play it, but for some reason it just shows up the QT logo and nothing more, as some people are telling me... could somebody check this out to see if it happens to you as well and tell me what could be the problem or any other details of the error so I can figure out what it is?
if you want to check a sample URL it loads from there, check this one: http://www.thebrooklynbrothers.com/new/portfolio/contentloader.php?file=cnneraq.mov&filetype=2
Thanks you so much for your time! ANY help would be greatly appreciated! I'm desperate right now!

I'm having a similar problem with videos uploaded onto my website. It all plays fine through Firefox and Internet Explorer on my other PC, but on this one (Win XP), I just get a blank page after it's finished loading. No video box or error mesage. Just lots of white space. I've checked all my settings, and have QT as my default player, but still nothing. Have also downloaded the latest QT updates. Is there something I'm missing in Windows or Internet Explorer? I don't have any problems with it on my Mac.
Thanks,
Lucy

Outlook autodiscover is not working for some users in coexistence

Hi
We are doing exchnage 2013/2010 coexistence
Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!. We end up creating the profiles manually. It has affected some but not all the users.
I followed the instructions here but it didn't help.
http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
Using outlook 2010, 2013, patches, .... didn't make a difference
Would you please help?
Thank you

Hi
If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
Also you can try below
You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value: 16777216
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
Name: MaxTokenSize
Type: REG_DWORD
Value: 48000
Just reboot the servers once its done and you will be good to go.
References
https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

ExpressCache cannot find mSATA after working for some time

Similar Messages

Maybe you are looking for