ExpressCard/34 Not Fully Inserted.
Does anyone has an idea why an ExpressCard/34 can't fully inserted into a 2007 15" MacBook Pro (Santa Rosa)? My newly bought ExpressCard can only be inserted to about 2/5 of full. Something seem to block and it gets tighter the deeper it's inserted. I have opened my MBP case before for replacing HDD. The steps were done properly, I am not sure if it has something to do with it though... Can someone explain why? Thank you.
That has to be a mechanical problem. I suggest an appointment at an Apple store genius bar. The technician may be able to find the cause and rectify it.
Ciao.
Similar Messages
-
Audio distortion when fully inserting headphones
Evening Applers
I've noticed a small crack on the very top left of my 3GS around the metallic frame that has coincided with a problem with the audio when adding headphones.
I suppose I'm trying to diagnose whether the impact of this crack could have damaged in some way the audio jack to cause audio problems when fully inserting the headphones. If I insert the headphones 1/2 way the audio is as new, but obviously as they're not fully inserted makes it tricky to listen without having to support the jack to provide the connection.
I've tried fully inserting a similar jack linked to my stereo, however, and the audio is as new!?!? I've also tried the headphones out of another iPod to see whether that is causing a problem as well as attempting to clean the jack and blow any dust out but to no avail.
Does anyone recognise this problem, and can offer any tips or suggestions as to resolving this?
Many thanks in advance
TimMany thanks for your reply,
I thought the same but would have thought the jack would then display similar problems when playing through another 3.5mm plug..it also turns out that the phone speaker itself doesn't work either unless the speakerphone is on. I'm beginning to think that something else is going on!!
I've no recollection of a bump, deep or crash of the severity that it would appear knock the whole audio aspect of an iPhone. I appreciate they are sensitive pieces of kit but this is a bit much.. -
My mac book pro will not fully boot up. I have the grey background with the apple sign and the timer going round...but 20 minutes later still no desktop
You could try doing a hard shut down (holding the power button or yanking the battery) and then doing a safe boot by holding the shift key at startup:
http://support.apple.com/kb/HT1455
Also, not sure if this applies in your case, but I've had that happen when there's a USB drive inserted either in the computer or a connected external keyboard. I did a hard shut down, removed the drive and it went through a normal start up. -
L505D-S5965 BIOS not fully ACPI compliant
Okay, I tried to reply to "BIOS Update Failure Satellite L505D-S5965" since my issue is similar and I have the same model, but that issue is closed so it wouldn't let me.
A couple weeks ago I was picking up my laptop and it slipped out of my fingers ad fell. Only about 6 - 8 inches, but it landed at an awkward angle. It immeadiatly started making a sound that made me think I had damaged the hard drive (a noisy whiring noise). I unplugged it and pulled the battery out immeadately. When I rebooted it, Vista never loaded fully, (I got a "Windows is loading files" but never a logo). I get a BSOD that reads
The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.
STOP: 0x000000A5 (0x00001000, 0x00000000, 0x96408500, 0x00000100)
The laptop has not booted since. Ever since, I get the option to attempt to boot Windows normally or go into Windows Startup Repair but it won't respond to the keyboard to let me choose which, and after 25 seconds attempts to boot into Windows Startup Repair, which gives me the same BSOD.
I can punch F2 to enter BIOS or F12 to enter Boot Manager, but the system doesn't responcd to keyboard in either.
I swapped the hdd into another laptop, which booted sucessfully.
A known good hdd installed in this system gives same BSOD.
I removed the hdd and booted off a recovery disc, which yeilded the same BSOD.
I attempted to flash BIOS off a USB as described in the above mentioned post, and it never worked. It looks like it never accessed the flash drive. The BIOS version is the most current available according to Toshiba, 1.5
If I remove the HDD and don't have a Recory disc in the DVD drive, I get:
"PXE-E61 Media Test Failure, check cable
PXE-M0F: Exiting PXE ROM.
No Bootable device -- insert boot disk and press any key"
This is the same with the BIOS flash drive or without.
I managed to disconnect the CMOS battery, upon booting the next time it recognized that power from CMOS had been interupted, but didn't change any other behavior.
So, do we think that my problem is physical damage, or did I do something interupting power? I have a parts laptop, so would the damage be, is it something I could swap (parts computer doesn't power off battery or AC, no lights, brick)
Anyone have any suggestions on what to try next?
SeanSean
First, let's try a system reset. Power off the notebook, unplug everything from it including the AC, remove the battery, press and hold the power button for 30 seconds, next replace the battery and the AC, then power on, as soon as you see the Toshiba logo press 'F2' to enter BIOS setup, in setup try to press 'F9' to load setup defaults, press 'F10' to save and exit. If the keyboard still won't work in setup to press 'F9' and 'F10', try this operation again, with an external keyboard.
Assuming you can complete this operation, but it still does not resolve your problem, try powering off, remove the AC and battery, then try removing both RAM modules, next replace one module in a different slot, replace the battery and AC, and try it again. Repeat as necessary to try to find a bad RAM module and/or bad slot. See page 52 of your Satellite® L500 Series User’s Guide on how to access and remove RAM modules.
Please let us know what happens. Good luck.
Mike -
Hi
My Nokia X6-16 GB is not fully charging. when i put it on chaging for one day it keep on charging.. Its not stopping the charging when fully charged. please help me.
Regards
DevanandHi Alcopops,
Thank you for posting and welcome to the forum.
Try to customize the Multimedia Settings of your phone for you to send large size of photos through MMS. Go to Messaging, select Options and then go to Settings. Once done, tap on Multimedia Message and then select Image Size. From there, you will be having an option to change it from small to large. If this doesn't work, consider double checking it with your Service Provider as they may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS. And also, make sure that the device is running its latest software.
Try this and let us know the outcome.
Cheers,
periwinkle28 -
Bad temp readings when sc2345 connetor fully inserted into chasis
I get bad temp readings when daq cable is fully inserted into "New" SC2345 chassis in LabVIEW, but in NImax numbers apear to be good. When cable is partialy inserted numbers seem to be ok all around. I have tried an identicale cable and dac card (DAQCard-6062E) on same laptop and got same error. If i hook up to an older SC2345 chasis the problem is not there. I have also hooked up a PC with a PCI-MIO-16E-4 daq card and the appropriate cable for this card and have no problems on the "New" SC2345.
OLD EQ PC
NEW EQ PC
OLD EQ LT
NEW EQ LT
TEMP
81.6
87.7
81.2
86.8
TEMP V
-0.000049
-0.000320
-0.000049
-0.000322
CJC TEMP
83.5
101.7
83.7
101.9
CJC V
1.093750
0.847500
1.093750
0.846100
Temp LV
81.6
87.6
64.7
36.5
REF TEMP
82.6
82.6
82.3
82.0
Temp (Temperature in max), Temp V (Temperature voltage in max), CJC Temp (CJC temperature in max), CJC V (CJC Voltage in max), Temp LV (Temperature in LabVIEW application)
Refrence temp was with an Omega Hand held unit.
Old EQ PC (Old SC2345 chasis with PCI-MIO-16E-4 Daq card and P/N 184749C-10 (10 meter cable) PC)
New EQ PC (New SC2345 chasis with PCI-MIO-16E-4 Daq card and P/N 184749C-10 (10 meter cable) PC)
Old EQ LT (Old SC2345 chasis with DAQCard-6062E Daq card and P/N 192061B-02 (2 meter cable) Lap Top)
New EQ LT (New SC2345 chasis with DAQCard-6062E Daq card and P/N 192061B-02 (2 meter cable) Lap Top)
There are no bent pins on any of the componets.
The LabVIEW application and daq settings are identicle.
The same CJC Map was used for all test.
Thanks in advance for any help you can give.
Travis -
Not existing can not be inserted
Dear Experts,
I am getting an error message if I am trying to change Purchase Requisition.
There are additional inserted item in the new tbale 'LT_BAPI_NEW'.
In the table 'LT_BAPI_OLD' are only two items. What is wrong there ?
I have thought with this FM it is really possible to change a PReq.
What can I do in this case ?
The item 00030 is not existing can not be inserted.
CALL FUNCTION 'BAPI_REQUISITION_CHANGE'
DESTINATION av_rfc_dest
EXPORTING
NUMBER = '1000115373'
TABLES
REQUISITION_ITEMS_OLD = LT_BAPI_OLD
REQUISITION_ITEMS_NEW = LT_BAPI_NEW
RETURN = LT_BAPIRETURN
EXCEPTIONS
OTHERS = 1.
Friendly Regards
ertasHi,
Refer to this link..[Help me about BAPI_REQUISITION_CHANGE!!!|Help me about BAPI_REQUISITION_CHANGE!!!] -
Clientgen does not fully qualify superclasses
I have datatypes that extend classes in a different package. When I use
WLS81 ANT task clientgen to generate client-jars from WSDL files obtained
from web services generated by servicegen, the superclasses are not fully
qualified in the generated java code, nor are there import statements for
the superclasses. This causes the generated code to have compile errors.
Other dependencies are fully qualified in the generated code, but the
superclass is not.
There mayThe WSDL is included below. Specifically,
com.starcomsoft.pp.database.BaseHelper does not get a fully qualifed
reference in the generated java code.
<?xml version="1.0" encoding="UTF-8"?>
<definitions xmlns:tns="http://localhost:7001/webservice/"
xmlns:wsr="http://www.openuri.org/2002/10/soap/reliability/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap12
="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:soap12enc="http://www.w3.org/2002/12/soap-encoding"
xmlns:conv="http://www.openuri.org/2002/04/wsdl/conversation/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/"
targetNamespace="http://localhost:7001/webservice/">
<types xmlns:tns="http://localhost:7001/webservice/"
xmlns:wsr="http://www.openuri.org/2002/10/soap/reliability/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap12
="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:soap12enc="http://www.w3.org/2002/12/soap-encoding"
xmlns:conv="http://www.openuri.org/2002/04/wsdl/conversation/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/">
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:stns="java:com.starcomsoft.pp.common" elementFormDefault="qualified"
attributeFormDefault="qualified"
targetNamespace="java:com.starcomsoft.pp.common">
<xsd:complexType name="AbstractSearchCriteria"
abstract="true">
<xsd:sequence>
<xsd:element type="xsd:int"
name="recordStatus" minOccurs="1" maxOccurs="1">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:stns="java:com.starcomsoft.pp.customer"
elementFormDefault="qualified" attributeFormDefault="qualified"
targetNamespace="java:com.starcomsoft.pp.customer">
<xsd:import namespace="java:com.starcomsoft.pp.database">
</xsd:import>
<xsd:import namespace="java:language_builtins.lang">
</xsd:import>
<xsd:import namespace="java:language_builtins.util">
</xsd:import>
<xsd:import
namespace="http://schemas.xmlsoap.org/soap/encoding/">
</xsd:import>
<xsd:import namespace="java:com.starcomsoft.pp.common">
</xsd:import>
<xsd:complexType name="Address">
<xsd:complexContent>
<xsd:extension base="stns:AddressHelper">
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="AddressHelper" abstract="true">
<xsd:complexContent>
<xsd:extension
xmlns:tp="java:com.starcomsoft.pp.database" base="tp:BaseHelper">
<xsd:sequence>
<xsd:element type="xsd:string"
name="addressOne" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="addressTwo" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="city" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.lang" type="tp:ArrayOfString"
name="errorMessages" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="id" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.util" type="tp:ArrayList"
name="messageList" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="recordStatus" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="stateId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="version" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="zipCode" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="ArrayOfCustomerGraphData">
<xsd:complexContent>
<xsd:restriction
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
base="soapenc:Array">
<xsd:attribute
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" ref="soapenc:arrayType"
wsdl:arrayType="stns:CustomerGraphData[]">
</xsd:attribute>
</xsd:restriction>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="ArrayOfProfile">
<xsd:complexContent>
<xsd:restriction
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
base="soapenc:Array">
<xsd:attribute
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" ref="soapenc:arrayType"
wsdl:arrayType="stns:Profile[]">
</xsd:attribute>
</xsd:restriction>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="Contact">
<xsd:complexContent>
<xsd:extension base="stns:ContactHelper">
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="ContactHelper" abstract="true">
<xsd:complexContent>
<xsd:extension
xmlns:tp="java:com.starcomsoft.pp.database" base="tp:BaseHelper">
<xsd:sequence>
<xsd:element type="xsd:boolean"
name="active" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="contactPoint" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="customerId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="departmentId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.lang" type="tp:ArrayOfString"
name="errorMessages" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="first" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="id" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="last" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.util" type="tp:ArrayList"
name="messageList" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:boolean"
name="primaryContact" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="recordStatus" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="title" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="type" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="version" minOccurs="1" maxOccurs="1">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="Customer">
<xsd:complexContent>
<xsd:extension base="stns:CustomerHelper">
<xsd:sequence>
<xsd:element type="stns:Address"
name="billAddressData" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="stns:Address"
name="billToAddress" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="stns:Address"
name="shipAddressData" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="stns:Address"
name="shipToAddress" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="CustomerAdjustment">
<xsd:complexContent>
<xsd:extension
base="stns:CustomerAdjustmentHelper">
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="CustomerAdjustmentHelper"
abstract="true">
<xsd:complexContent>
<xsd:extension
xmlns:tp="java:com.starcomsoft.pp.database" base="tp:BaseHelper">
<xsd:sequence>
<xsd:element type="xsd:int"
name="adjustmentId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:double"
name="amount" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="code" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="customerId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.lang" type="tp:ArrayOfString"
name="errorMessages" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="facilityId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="factorId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="id" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.util" type="tp:ArrayList"
name="messageList" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="methodId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="recordStatus" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="type" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:double"
name="value" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="version" minOccurs="1" maxOccurs="1">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="CustomerGraphCollection">
<xsd:sequence>
<xsd:element
type="stns:ArrayOfCustomerGraphData" name="customerGraphDataValues"
minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="CustomerGraphData">
<xsd:sequence>
<xsd:element type="xsd:string" name="code"
minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int" name="id"
minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:string" name="name"
minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int" name="parentId"
minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="CustomerHelper" abstract="true">
<xsd:complexContent>
<xsd:extension
xmlns:tp="java:com.starcomsoft.pp.database" base="tp:BaseHelper">
<xsd:sequence>
<xsd:element type="xsd:int"
name="accountStatus" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:dateTime"
name="agingDate" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="agingDays" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="allowSplitOrders" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:double"
name="balanceDue" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="stns:Address"
name="billAddressData" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="stns:Address"
name="billToAddress" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="billToAddressId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="billingAddressSourceCode" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="billingPartnerId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="billingPartnerName" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="buyer" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:double"
name="creditAvailable" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:double"
name="creditLimit" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="currencyId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="customerCode" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="deliveryPoints" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="departmentCode" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="dropSequence" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.lang" type="tp:ArrayOfString"
name="errorMessages" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="facilityId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:double"
name="financeChargePercent" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="fixedTimeForStop" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:double"
name="freightAmount" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="freightTypeId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="groupId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="gstTaxApplicable" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="hasHistory" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="id" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="importNumber" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:boolean"
name="isDirectlyBillable" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="isGroupVolumeDiscounted" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="isRegion" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="isShipTo" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="kitCodeId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="leadTime" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="lockoutControl" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="managerId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="mediumRangeZone" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="merchandiserId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.util" type="tp:ArrayList"
name="messageList" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="name" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="packageId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="parentCustomerId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="parentName" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="priceListId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="printStatement" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="receivingTimeFrom" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="receivingTimeTo" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="recordStatus" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="requirePO" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="requireSKU" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="salesRepId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="stns:Address"
name="shipAddressData" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="stns:Address"
name="shipToAddress" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="shipToAddressId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="shipViaId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="shipZoneId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="shortRangeZone" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="specialCodes" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:dateTime"
name="startDate" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="storeNumber" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="summaryPrintCodeId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="taxCodeId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="taxNumber" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="termsCodeId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:double"
name="toBeDue" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="useShippingAddress" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="vendorNumber" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="version" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="warningControl" minOccurs="1" maxOccurs="1">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="CustomerProfile">
<xsd:sequence>
<xsd:element type="stns:ArrayOfProfile"
name="profiles" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="CustomerSearchCriteria">
<xsd:complexContent>
<xsd:extension
xmlns:tp="java:com.starcomsoft.pp.common" base="tp:AbstractSearchCriteria">
<xsd:sequence>
<xsd:element type="xsd:int"
name="billingPartnerId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="id" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="isDirectlyBillable" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="isRegion" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:boolean"
name="isShipTo" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="parentCustomerId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="searchString" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="searchType" minOccurs="1" maxOccurs="1">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="CustomerTypePct">
<xsd:complexContent>
<xsd:extension
base="stns:CustomerTypePctHelper">
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="CustomerTypePctHelper"
abstract="true">
<xsd:complexContent>
<xsd:extension
xmlns:tp="java:com.starcomsoft.pp.database" base="tp:BaseHelper">
<xsd:sequence>
<xsd:element type="xsd:int"
name="customerId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="customerTypeId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.lang" type="tp:ArrayOfString"
name="errorMessages" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="id" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.util" type="tp:ArrayList"
name="messageList" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="recordStatus" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="status" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="typePct" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="version" minOccurs="1" maxOccurs="1">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="MailingListSubscription">
<xsd:complexContent>
<xsd:extension
base="stns:MailingListSubscriptionHelper">
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="MailingListSubscriptionHelper"
abstract="true">
<xsd:complexContent>
<xsd:extension
xmlns:tp="java:com.starcomsoft.pp.database" base="tp:BaseHelper">
<xsd:sequence>
<xsd:element type="xsd:boolean"
name="checked" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="customerId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.lang" type="tp:ArrayOfString"
name="errorMessages" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="id" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="mailingListId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="mailingListName" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.util" type="tp:ArrayList"
name="messageList" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="recordStatus" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="version" minOccurs="1" maxOccurs="1">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="NoteVault">
<xsd:complexContent>
<xsd:extension base="stns:NoteVaultHelper">
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="NoteVaultHelper" abstract="true">
<xsd:complexContent>
<xsd:extension
xmlns:tp="java:com.starcomsoft.pp.database" base="tp:BaseHelper">
<xsd:sequence>
<xsd:element
xmlns:tp="java:language_builtins.lang" type="tp:ArrayOfString"
name="errorMessages" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="id" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.util" type="tp:ArrayList"
name="messageList" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="recordStatus" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="tag" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="text" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="type" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="version" minOccurs="1" maxOccurs="1">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="Notes">
<xsd:complexContent>
<xsd:extension base="stns:NotesHelper">
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="NotesHelper" abstract="true">
<xsd:complexContent>
<xsd:extension
xmlns:tp="java:com.starcomsoft.pp.database" base="tp:BaseHelper">
<xsd:sequence>
<xsd:element type="xsd:int"
name="customerId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:dateTime"
name="date" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.lang" type="tp:ArrayOfString"
name="errorMessages" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="id" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.util" type="tp:ArrayList"
name="messageList" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="owner" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="recordStatus" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="reference" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="subtype" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="text" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="type" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="version" minOccurs="1" maxOccurs="1">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="Profile">
<xsd:complexContent>
<xsd:extension base="stns:ProfileHelper">
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="ProfileHelper" abstract="true">
<xsd:complexContent>
<xsd:extension
xmlns:tp="java:com.starcomsoft.pp.database" base="tp:BaseHelper">
<xsd:sequence>
<xsd:element type="xsd:int"
name="customerId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.lang" type="tp:ArrayOfString"
name="errorMessages" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="id" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.util" type="tp:ArrayList"
name="messageList" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="numericInfo" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element
type="stns:ProfileInfo" name="profileInfoData" minOccurs="1" maxOccurs="1"
nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="profileInfoId" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:int"
name="recordStatus" minOccurs="1" maxOccurs="1">
</xsd:element>
<xsd:element type="xsd:string"
name="textInfo" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element type="xsd:int"
name="version" minOccurs="1" maxOccurs="1">
</xsd:element>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="ProfileInfo">
<xsd:complexContent>
<xsd:extension base="stns:ProfileInfoHelper">
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
<xsd:complexType name="ProfileInfoHelper"
abstract="true">
<xsd:complexContent>
<xsd:extension
xmlns:tp="java:com.starcomsoft.pp.database" base="tp:BaseHelper">
<xsd:sequence>
<xsd:element type="xsd:string"
name="domainValueName" minOccurs="1" maxOccurs="1" nillable="true">
</xsd:element>
<xsd:element
xmlns:tp="java:language_builtins.lang" type="tp:ArrayOfString"
name="errorMessages" minOccurs="1" maxOccurs="1" nillablBruce,
Sorry, I forgot to mention that the WSDL was generated by querying the URL
of the deployed webservice. If there is something missing from the WSDL,
it may be due to servicegen, or a problem with deployement. All of this
used to work in WLS 7.0 sp1.
I submitted this case (459937) to BEA Support on 11/12/03 and have given
them my EJB jar file so they can reproduce the problem using servicegen.
I would appreciate any input you can provide to resolve this problem, but
you can let Support handle it from here if you wish.
Thanks,
Tony
[email protected] (Bruce Stephens) wrote:
Hi Tony,
Could you clarify your starting point; i.e. do you begin with WSDL or
from java?
In looking at your WSDL, on the surface I'm concerned that the imports
should be something like <xsd:import namespace="..."
schemaLocation="myschema.xsd"/> so it may not be including your
definitions.
Thanks,
Bruce
Tony Huang wrote:
I have datatypes that extend classes in a different package. When I
use WLS81 ANT task clientgen to generate client-jars from WSDL files
obtained from web services generated by servicegen, the superclasses
are not fully qualified in the generated java code, nor are there
import statements for the superclasses. This causes the generated
code to have compile errors. Other dependencies are fully qualified in
the generated code, but the superclass is not.
There mayThe WSDL is included below. Specifically,
com.starcomsoft.pp.database.BaseHelper does not get a fully qualifed
reference in the generated java code. -
CLIENT_TEXT_IO not fully exported
Hi everyone,
I am using CLIENT_TEXT_IO to export data into a excel file, but the data is not fully written and terminated and also gives this error: "File Creation was interrupted. Error 302000: non-Oracle exception".
any idea....
Thanks ®ards
SekharError 302000: non-Oracle exceptionThis is almost always an OS problem. You have no access to the file, the file was deleted or moved, etc.
Without any extra information (you didn't even mention Forms, OS, browser or Java version you are using) and your code it is hard to tell. -
Data not getting inserted in R/3 System from Webdynpro
Hi,
We were trying to insert some data into r/3 z-table using a Custom BAPI using RFC.
But the data is not getting inserted.
Through I commit is being performed explicity.
Please help:
Below is the code :
Controllor code :
public void wdDoInit()
//@@begin wdDoInit()
try{
Z_Bapi_Rfq_Test_Input objStatus = new Z_Bapi_Rfq_Test_Input();
wdContext.nodeZ_bapi_rfq_test().bind(objStatus);
// Create a new element in node Bapi_Transaction_Commit_Input
Bapi_Transaction_Commit_Input inputCommit =
new Bapi_Transaction_Commit_Input();
wdContext.nodeBAPI_TRANSACTION_COMMIT()
.bind(inputCommit);
//Bapi_Transaction_Commit_Input obj;
// wdContext.nodeZ_Bapi_Quo_Salesrep_Status_Input().invalidate();
//wdContext.nodeOutput().invalidate();
//wdContext.nodeRfq_Status().invalidate();
} catch(Exception rfqException){
wdComponentAPI.getMessageManager().reportException("rfqException="+rfqException.getMessage(),true);
//@@end
public void executeBapi( )
//@@begin executeBapi()
try{
Z_Bapi_Rfq_Test_Input obj = wdContext.currentZ_bapi_rfq_testElement().modelObject();
AbstractList objAbBapiPartner = new Bapiparnr.Bapiparnr_List();
Bapiparnr objBapiPartner = new Bapiparnr();
objBapiPartner.setPartn_Numb("0000001046");
objBapiPartner.setPartn_Role("AG");
//obj.addPartner(objBapiPartner);
objAbBapiPartner.add(objBapiPartner);
obj.setPartner(objAbBapiPartner);
Bapisdhd1 objBapisdhd1 = new Bapisdhd1();
objBapisdhd1.setSales_Org("2500");
objBapisdhd1.setDistr_Chan("30");
objBapisdhd1.setDivision("20");
objBapisdhd1.setDoc_Type("ZRFQ");
obj.setHeader(objBapisdhd1);
obj.execute();
// Synchronise the data in the context with the data in the model
wdContext.nodeZ_bapi_rfq_test().invalidate();
wdContext.nodePartner().invalidate();
wdContext.nodeHeader().invalidate();
wdContext.nodeOutput().invalidate();
wdContext.nodeReturn().invalidate();
// Z_Bapi_Quo_Salesrep_Status_Output outPut= obj.getOutput();
// if(outPut!=null){
// List materialList=outPut.getRfq_Status();
// if(materialList!=null){
// wdComponentAPI.getMessageManager().reportSuccess("materialList="+materialList.size());
} catch(Exception rfqException){
wdComponentAPI.getMessageManager().reportException("rfqException="+ rfqException.toString(),true);
//@@end
public void executeBapi_Commit( )
//@@begin executeBapi_Commit()
try {
// Calls remote function module BAPI_Transaction_Commit
wdContext.currentBAPI_TRANSACTION_COMMITElement().modelObject().execute();
wdContext.nodeBAPI_TRANSACTION_COMMIT().invalidate();
wdContext.nodeOutput1().invalidate();
wdContext.nodeReturn().invalidate();
wdContext.nodeReturn1().invalidate();
} catch (WDDynamicRFCExecuteException ce) {
wdComponentAPI.getMessageManager().reportException(ce.getMessage(), false);
//@@end
View Controlloer Code:
public void wdDoInit()
//@@begin wdDoInit()
wdThis.wdGetCControllerController().executeBapi();
wdThis.wdGetCControllerController().executeBapi_Commit();
IWDApplication wedDynApplication=wdComponentAPI.getApplication();
IWDApplicationInfo applicationInfo=wedDynApplication.getApplicationInfo();
Collection collection=applicationInfo.getApplicationProperties();
//@@endHi Gareth,
I was not getting enough time to reply, so replying late.
Actaully the problem was with r/3 BAPI Code itself.
There was condition in the begining of the code to check the data in the workare of R/3, so this condition was failing here.
But when we try to invoke that bapi from r/3 workbench it works fine because the data first comes to R/3 workarea then to R/3 Tables.
But when we insert data from Webdynpro framework , the data directly goes to R/3 Tables rather than the R/3 Workarea. So in Bapi the first condition was failing and no data was getting inserted.
So this was the problem, and we solved it.
Thanks,
Regards,
Aditya metukul -
I rented a movie and it appears in the video app, but it did not fully download. It does not appear in downloads how do I repair the file?
Did you download it using iTunes for Windows, or did you download it directly to an iOS device?
If you can't find the movie you downloaded on your iPad, iPhone or iPod Touch, check inside your Videos App -
On my ipod touch I'm not too sure how I uploaded a album onto my ipod from my laptop. But, now there is no way to delete the album full of pictures. What do I do? I only gotten it a while ago and not fully sure how to work it. Help?
http://support.apple.com/kb/HT4236
-
Creative Zen Vision M not fully charging
(Creative Zen Vision M not fully charging( Hi, I recently bought a refurbished ZVM that doesnt seem to charging properly. When I first got it, it hadnt been charged in quite some time so the battery was overdead. My PC couldnt detect it when I connected it via usb and it didnt even start charging at all. I then connected it to a wall charger and it finally started charging. The strange thing is it never fully charges. I've charged it twice now, both times for at least about 2 hours, and the battery doesnt go more than 50%. And when I connect it to my PC to transfer songs, instead of resuming its charge, my battery runs out. Is this a case of a faulty battery? I li've in Australia and I bought it from the USA. I would prefer not to go through the trouble of returning it if I could. Anything I should do like leaving it to charge for an even longer time? Also one more thing I should mention. When I remove the wall charger and plug it back in, it takes the ZVM sometime to detect it, about 30 minutes or so, and start charging again. Any help or suggestions would be greatly appreciated.
I have the exact same problem. I just mailed mine in for repair today.
-
HP Photosmart Premium All-In-One driver software will not fully install
After downloading and installing the full version of the printer driver (both from on-line site AND from purchased driver CD), the software appears to download fine, but will not fully install. I have run Print and Scan Doctor and tried on-line support, uninstalling, reinstalling the drivers and have tried on-line HP support. My new computer (HP Envy 715 xt) is less than 3 weeks old. I am running Windows 7 Professional 64 bit. The printer/scanner/copier/fax worked fine on my old computer which ran Windows XP. I have tried everything - HP on-line support will not speak to me without charging me, even though my computer is brand new - they insist the problem is with the printer, which is out of warranty.
Hello Deb!
I would recommend performing an L3 uninstall, and reinstalling.
I am listing the L3 uninstall steps below:
-Launch your temp folder
-Go to the 7z folder
-Go to the util\CCC folder
-Launch the uninstall_L3.bat file
Please let me know the results!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
MacBook Pro unibody, 15" 2009
ExpressCard/34 (Card is by Transcend TS-RDF1, JMicron chip for SD card) is not working in BootCamp Windows 7 64-bit. Windows reports:
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
Other data points: Card works fine in Mac OSX, worked under Windows XP 32-bit (initially reported same problem, but works after reboot).
Checking the forums there seems to be no actual device suggested to actually remove that would help the problem. And even if it was, the concept is ridiculous. What other device would you like to remove? Display adapter? Network adapter? No way. I use all available devices and don't want to compromise.
It seems like BIOS emulation does not allocate enough resources to ExpressCard.
Are others having the same problem?
Does anyone have a fix for this?
Is there anyone at Apple who cares to provide a solution?It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)
Maybe you are looking for
-
Error while deplye logon par file in NWDS
Hello Everybody, Here I am using EP 7 and SP 14. I have to change my Portal Logon PAR file as I have to add some hyperlinks in my par file. Now problem is , after importing par file in NWDS i made some changes.Then at the time of exporting file, it a
-
HP Officejet 4500, problem with printer. Does not print and no files to be printed in the que
Hp all in one printer I send documents to be printer, but nothing will appear in the "see whats printung menu. This usually happens when I try to print from incoming documents/menus. Most print jobs from Word when from my own computer will print, bu
-
Dreamweaver CS5 -- Kinda Buggy on a Mac
I'm using Dreamweaver CS5 (v.11, build 4964) on my Mac (OSX 10.6.6) and I must say, it's kind of buggy. The thing crashes every once and a while but what's currently irking me is the Files Panel where instead of getting one half 'local' and one half
-
ITunes Airtunes Apple TV dropout
Hi I use: MacBook Pro running 10.8.1 Apple TV 3rd gen Airport Express (n) 5GHz Belkin Router I can play music from iTunes to my airport express without any issues at all, no dropouts at all, fabulous. But if I do the same but select Apple TV from iTu
-
External Editor Photoshop CS doesn't open image
When I attempt to open an image from Aperture with Photoshop CS as my external editor, the Photoshop application opens, but the image doesn't open. If I use another external editor (ie iPhoto) the image does open. This is true whether it is tiff, psd