ExpressCard SSD options to boot a Powerbook (Leopard)

Hi all,
Not sure if this is the correct forum/category for this but...
Anyone know of any particular type and/or brand of ExpressCard SSD from which it is possible to boot a G4 PowerBook running Leopard?
I have a very individual and specific reason for doing this and just hope that it's possible!
Looking to learn from others' experiences before I blow the cash only to find out that I've bought the wrong item or, worst still, it can't be done.
Thanks!

Snow Leopard comes in discs only. The USB drive may be a counterfeit and/or corrupt. There are two options for you:
Get replacement original OSX installation disks from Apple customer service. Have your MBP serial number ready and there is a charge.
Or two, purchase a Snow Leopard disk from the Apple online store:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao.

Similar Messages

Late 2008 mbp - installed new ssd - trying to boot from snow leopard iso on flash drive - says 'cannot install mac os on this computer'

Hello -
I just installed a new M500 Crucial ssd in my late 2008 mbp - everything was working fine on old hard drive (running snow leopard) but was getting slow and wanted to upgrade - i lost my snow leopard disk when moving from hawaii so i found an iso online - using a flash drive i partitioned the disk and made the bootable image on flash drive - formatted as extended/journaled - switched out the hard drives - plugged in the flash drive - started the comp - held option - install begins to boot - choose language - all is fine - choose english - next step window pops up saying 'cannot install os on this computer' - click on utility but all options are greyed out - disk util is greyed out - only options it gives is to start from backup or restart - real confused here - all help appreciated - thanks in advance and happy new year!

Snow Leopard comes in discs only. The USB drive may be a counterfeit and/or corrupt. There are two options for you:
Get replacement original OSX installation disks from Apple customer service. Have your MBP serial number ready and there is a charge.
Or two, purchase a Snow Leopard disk from the Apple online store:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao.

ExpressCard SSD options

Anyone using / find a good solid state disk option that for the MBP ExpressCard slot? I do a lot of virtualization work and would love to not be tied to my external FireWire drive all the time.

I've checked this out as well. I installed a VMWare Fusion VM on an express card SSD and wow, was it slow. For writes anyway. Not usable for everyday work.
BUT I wonder if it would be at least slightly useful for loading Applications. I mean, copy /Applications to the SSD... trying that now,actually.
It might not help tremendously, but I am curious. Anyone tried this on Lexar, Transcend or the like ?

Almost got WinXP booting from Expresscard SSD

Here is a story of how I almost got this to work. Seeing if the user community has any advice/suggestions. Here we go:
1) Bought a 48GB Express34 SSD card hoping to install and boot XP on it. The expresscard34 is on the Serial-SATA bus so had my fingers crossed.
2) In OSX ran the BCA, partitioned 48GB, and installed WinXP on the my internal HD: Success
3) Booted into WinXP, updated to SP3/etc, restart: Success
4) In OSX I used WinClone to Clone my bootcamp partition: Success
5) In OSX inserted my expresscard SSD and formatted it using to the GUID Partition Table: Success
6) In OSX I used WinClone to restore the bootcamp partition to the SSD: Success
7) Deleted the bootcamp partition on my internal HD. Now I have OSX->HDD and WinXP->SSD: Success
8) Shut down computer. Make sure SSD is inserted. Turn computer on while holding the option key. Boot Camp sees MacintoshHD and BootcampSSD!: Success
9) Choose BootcampSSD...wait for it..."No bootable device found - please insert disk and hit any key": FAIL :/
Side note: I tried this again, but skipped step 7. It worked. I was able to boot from either MacintoshHD, BootCampPartitionHDD, or BootCampSSD, but that defeats the purpose...
I suppose this has to do with the fact that WinXP not only likes to be the only OS on a HD, but also perhaps the driver between the expresscard34 and SATA bus is not available on bootup. Its a shame because BC sees the SSD as bootable, but WinXP chokes. Of course it is a 10 yr old OS so its almost to be expected.
Perhaps this would be possible using Win7?

Thanks for replying. I gave changing the bootconfiguration an other try. although I had done it already.Results: If I use only "legacy" the bios passes both my ssd-drive and my hdd-drive and goes to network-boot (without result of course). If I choose Efi first, and put the windowsbootmanager on SSD on top, he skips it an goes to bootmanager on the HDD.The question still is: How to adapt the windows bootmanager on the ssd to make that it boots the windowspartition on the SSD ??

I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?

I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?

It's best to install Snow Leopard on one of the three remain drives without an Operating System.
You can then install the applications you need from the original media. Create a User Account using Setup Assistant.
Do you want to migrate User Accounts from the OSX LIon boot drive, or are you keeping the User Accounts separate?
Dual-booting just requires holding the option key during startup and selecting either Lion or Snow Leopard.

My MBP won't boot from my Expresscard SSD after I took it out during sleep!

Before this happened I booted my Macbook Pro from an Expresscard SSD. Oddly enough you can take it out while the computer is sleeping. This time though I took it out and inserted it in another computer to transfer files. I put it back in and woke the computer, and I started getting weird messages (ex. Evernote didn't work because it couldn't read its database,) and other things. Now it simply hangs on the Apple logo during startup.
Does anyone that knows what exactly happens to a drive during sleep, and while being read by another computer? What I can do to avoid reinstalling OSX on the drive?

+Oddly enough you can take it out while the computer is sleeping.+
What makes you think that? From your description, it's obvious that you corrupted the contents of the drive. You can try "Repair Disk" in Disk Utility, but most likely you'll have to reinstall. I wouldn't trust any of the data on it now.

Booting of ExpressCard SSD

I saw a deal online for a 4GB SSD ExpressCard for under $10 shipped. I was wondering if it was possible to boot of the SSD? I would like to put linux or some other OS on the ExpressCard and be able to keep it in my laptop case to boot off once in a while. Other than that, I can't think of any justification to buy the SSD.

No. ExpressCard SSDs require drivers that must be loaded by the OS before the SSD can be accessed. Catch22 - no OS, no driver, no ExcpressCard SSD access, can't boot from it.

ExpressCard SSD not detected by Windows 7

I've got Windows 7 RC 64-bit installed on a 2.53 GHz MacBook Pro (dual boot using Boot Camp) with an ExpressCard slot. I also got a FileMate SolidGO 3FMS4D48M-WR 48GB ExpressCard SSD; the drive works beautifully under OS X, but is not recognized at all by Windows 7 when it's in the ExpressCard slot. In Device Manager, the yellow caution icon appears in front of the Standard ACHI 1.0 Serial ATA Controller under IDE ATA/ATAPI controllers. The drive does not show under Disk drives or in Disk Manager. The corresponding Device Status message is: "This device cannot find enough free resources that it can use (Code 12). If you want to use this device, you will need to disable one of the other devices on this system."
The drive is recognized as SATA under Mac OS X and also works fine in Windows when plugged into a USB port instead of the ExpressCard slot (at which point it is not treated as SATA, but USB). I've tried the latest Boot Camp drivers, but that has no effect. Any suggestions?
Edit/Delete Message

Hi
If the device is not visible in device manager, not even as an unknown device, then this means that the device does not exist or has not been detected by BIOS.
Usually the infrared receiver should be visible in device manager under:
Human interface devices - > SMSCIR infrared receiver
In System devices you should see the Consumer IR Device.
Be sure that you enabled the option sow hidden devices in device manager maybe then you could see this
Please also check the BIOS
Im not quite sure if the infrared device option would be listed in BIOS but you should check it

Odd Expresscard SSD Issue dv8t-1200 cto

I've got a very odd problem occuring with a wintec filemate ssd expresscard /34 in my dv8t. I suspect it is a bios configuration issue, but since I'm not versed enough in hardware, apparently, HP has decided to cripple my access to my hardware.
So here's the issue. If I plug the expresscard SSD in before I boot, it is not recognized as the appropriate device, only "SATA Controler" and does not mount the volume. If, however, I turn the computer on and plug in the device while at the "HP" splashscreen, it is immediatly detected as "Wintec Fiilemate SSD" and the volume mounts when windows boots. Notice I said "while at the splashscreen" I litterally mean RIGHT after I see the "HP" logo. This should take out any OS factor in this equation.
What do I have to do to make my HP initialize the PCIe bus correctly on boot? Will there be a bios update to let me do this? Yes, I tried the ONLY option that may even slightly pertain to this, "Powersave card reader" to false and true. Same result.

1) Already tried F.25 hp provided bios. Does not fix the issue. I also obtained a modified F.25 bios that unlocks half the options of the bios through advanced menu, but disk management does not work, and chaning the setup app in an Insyde bios is proving ridiculous. If you could tell me what hex address the advance and disk and power tabs are located, that might facilitate my modifying of the bios to give me all the info I need.
2) Linux isn't listed, but hey linux seems to work fine with this EXPRESSCARD drive. Must be the hardware initialization by the kernel does it. I guess if the bios allowed me to allocate my resources correctly, I could make windows work, but hey a configurable system, apparently, HPs are not.
3) As stated above, this is NOT a SATA SSD. (Well not plugged diectly into the SATA) It is an expresscard/34 interface eSATA card. It may however be the manufacturer's firmware, but they are also looking into it.
It really seems like the bios only initializes this slot AFTER the computer posts and it detects something was inserted. Not, as it should, check and see if something is there then initialize the device. To get around this issue I turn on the computer and then plug the SSD in. When I've symbollically linked the system startup files to load post driver initialization on the SSD, do you know how annoying it is when I forget to do this?
Which brings me to another point. I wouldn't be complaining about the SSD not being recognized when turned on if I COULD JUST BOOT from it. But since I cannot do that, once again a bios limitation, I chose to hack boot to this drive. All this should be perfectly doable with the hardware. In fact it is so long as I don't forget to unplug the SSD, wait for HP splash screen, and then plug it in before the OS boots. Quite frustrating.
Sorry, didnt really mean to rant at you. Just frustrated. I know you were trying to help, and I thank you for that.

How do you run to Drives on the same screen. I installed a ssd and a hhd to my mac but i can only view the content of the drive only if i boot of that drive. Im try to have my ssd for fast boots and hhd for my music,movies etc. Please help.

I installed a samsung 840 pro SSD to my primary slot and relocated my 1.5 TB HDD to a data double where my optical drive was. I transfered my apps and Mac OS X to my SSD for fast boots and all my itunes movies, music, Iphoto etc to my HDD. I rebooted off my SSD then seen all the data on my HHD itunes movies, music, iphotos etc i cannot view on my SSD. So my question is how do you view all the content on both the ssd and hdd on the same screen with having to boot off one or the other?

No, what I'm saying is that once you boot into OSX, you should be able to see both drives listed. If you don't then either OSX is hiding the other drive because it sees it as a boot drive and is trying to protect the contents from novice users or there's another problem. If it's the first thing (i.e. it's a protection thing), then your only option would be to boot into the old drive, copy off all your personal data to an external backup drive, then reboot into the SSD and go into Disk Utilities and wipe/reformat the second drive so that you can see it as a regular secondary drive. Then when you see it as that, you can copy your data back to it.
Be carefull poking around in Disk Utility as you can easily lose your data. It's possible the Mac just isn't mounting that second drive because it sees it as another boot drive. Whatever you do, don't accidentally erase it without getting a copy of your data off of it because you obviously don't have that on your SSD now.

Macbook Will Not Boot After Updating Leopard

I just reinstalled Leopard after having some trouble with my partition tables, and everything ran smoothly and worked fine. After the install I let software update update everything including the 10.5.5 update. It prompted me to reboot, and when I did it got to the grey Apple screen and the thing spun for about 30 seconds before it restarted and did it again. This happened a few times and then I booted from a Leopard disk to look at disk permissions and they seem to be fine. Anyone have any idea why this is happening or how I would fix it?
Thanks in advance, hope to get this sorted out quickly, I thought I had finally gotten my computer working fine again when I reinstalled Leopard. :P

At start up, press 'C' to boot directly from a CD/DVD. Or, you can press 'Option' and you should get a list of bootable selections (CD/DVD, external hardrives) that you can boot from - assuming you have something that IS bootable.
I recently had a problem and ended up reinstalling my OS (via TimeMachine). I also confirmed that you can boot from your original OSX install disk. As part of this process I also discovered I could NOT boot directly FROM the AppleCare provided TechTools Deluxe disk. Supposedly you can boot INTO that disk via a restart but that seems kind of silly to me.
However, if you have signed up for AppleCare and go to the Apple Support web site, you can download TechTools Deluxe and it can be made bootable by burning the .dmg file via Apple Disk Utilities. I don't understand Apple logic of not making the provided AppleCare TechTools Deluxe disk bootable.

Dual Boot with Snow Leopard and Mavericks not possible?

I have a Early 2011 Macbook Pro with 2,3 GHz i7 Quad and two 512 GB SSDs (the secondary disk in an optical drive bay enclosure). This Macbook Pro can run Snow Leopard and Mavericks on the primary disk without problems. When I try to set up a dual boot system however, problems appear and it looks like it is not possible. When I start from Snow Leopard, I cannot select Mavericks as a start volume and vice versa. The error message says something like "Bless tool" cannot use this disk, i.e. unmount and boot from it. The problem remains when I exchange the disks (putting the primary disk in the drive enclosure and vice versa). When I put the secondary drive in an external case however, it is possible to boot from it - but strange things happen when the system starts: My computer clock is reset to 1/1/2001, WiFI passwords are not remembered for more than one session, disk permissions are reported as "repaired" but do apear as not repaired when I check them again - and other issues). I have verified both disks already and repaired permissions but that does not change the situation. So my experience is different from what is said in https://discussions.apple.com/thread/566781. It looks like the latest Mavericks cannot coexist with Snow Leopard on neiter a secondary internal drive nor on an external drive. This is strange since both disks and systems work flawless when run alone. Any suggestions to solve this problem?

When I check the Mavericks disk in the optical drive with disk utility after booting / running Snow Leopard on the primary disk I get som errors, see below ("disk utility Info"). So after all, I decided to erase the disk and install Mavericks new. But even erasing the disk is not possible when it is in the optical drive enclosure. I get this error message:
"Volume Erase failed with the error:
Could not unmount disk"
When I put this disk into an external case connected via USB however, it starts and runds MAvericks without any Problem. Same happens when I put thie Mavericks disk into the internal primary hard disk place.
"disk utility Info" when verinfying the secondary drive in the oprical bay:
Verifying volume “Samsung SSD Daten”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Unused node is not erased (node = 40)
Checking catalog file.
Unused node is not erased (node = 30)
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Unused node is not erased (node = 8)
Checking volume bitmap.
Volume bitmap needs minor repair for orphaned blocks
Checking volume information.
The volume Samsung SSD Daten was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “Samsung SSD Daten”
Error: Could not unmount disk

Dual boot machine- snow leopard and Lion

It appears I will need to set up one of my machines as dual boot, containing partitions for Snow Leopard and Lion. The reason is that Quicken is NOT compatible with Lion, and will apparently never be. Intuits "solutions" are to go to other, far less capable software, or not upgrade. Which, of course means, NEVER upgrade again.
So, I think my best solution is to set up a partition for snow leopard and one for Lion. How do I go about this? Size of partition. How to partition? Which boot disks do I use to do this?
Any help is much appreciated.

Ok, I just got done doing this yesterday so I can lay it out for you.
1: Copy all your user files to a regular external drive and disconnect.
2: Carbon Copy Cloner your 10.6.8 setup to another blank HFS+Journaled external drive and disconnect.
3: Hold c and boot off the 10.6 installer disk and erase your entire boot drive in Disk Utility (under the Utilities menu) format HFS+Journaled (default) of course.
4: Quit and install 10.6. Setup with the same user name as Snow. Run the 10.6.8 Combo Update. Then Software Update.
http://support.apple.com/kb/DL1399
5: Use the MacAppStore to download Lion, BUT DO NOT INSTALL yet! Cancel it and click on the Installer and select "Show in Finder" follow these instructions to make boot DVD's and dmg images of Lion installer.
http://www.eggfreckles.net/tech/burning-a-lion-boot-disc/
6: Once you do that, then Install Lion. On a pristine 10.6.8 with no third party programs or other BS it should go perfectly. Check it out that it's stable just in case or else hold command r and boot into the Recovery Partition and redownload/install again.
7: Once that's done and Software Updated, run Bootcamp and create a Windows partition larger than your 10.6.8 clone naturally. The size is up to you to decide. Cancel the Bootcamp when the partition is created.
8: Hold Option and boot off the 10.6.8 clone with all your stuff and programs, use Disk Utility to change the "BOOTCAMP" partition to "Snow Leopard" and make it a HFS+ Journaled partition from the MSDOS format (not the whole drive now or you'll lose Lion and the Recovery Partition) If this doesn't work then use Disk Utility c booted from the 10.7 DVD or command r from the Lion Recovery Partition and use Disk Utility there.
9: Once that's done, Option boot off the 10.6.8 clone and Carbon Copy Clone 10.6.8 onto the Snow Leopard partition.
Walla, a dual boot system with all your stuff intact. Just hold option upon boot and/or use the Startup Disk in System Preferences to set a default.
I'm currently working on a quad boot system now. It's got Lion, Snow, Linux and will have Windows too. A lot more complicated than simply Snow and Lion.
Note: OS X Lion reguires a internet connection to install, even from a boot DVD.
Enjoy.

Boot options duplicated; Boot Camp Assistant newly non-functional

Short version:
1. Up to tonight, my hard drive was encrypted using PGP Whole Disk Encryption -- secure boot and all. Had Boot Camp working fine with it.
2. Attempted to install OS X 10.6.5 despite PGP warnings to decrypt first. Ended up with an unbootable OS X partition. Decrypted drive in Windows, got back into OS X.
3. Disk Utility returned a few errors on OS X partition. Quickly fixed those by booting from Snow Leopard CD and running it.
4. What I'm now noticing is that when I hold down the option key, I'm given duplicate options. Instead of "OS X Partition Name Here" and "Windows 7 Name Here", I've got a duplicate for the former. So my options are "OS X", "OS X", or "Windows".
5. And, when I try to run Boot Camp Assistant out of curiosity, I'm told that I either need one big non-partitioned drive, OR existing partitions created by Boot Camp. I already did that.
Any thoughts on fixing #4 or #5? Resetting PRAM doesn't help. Windows does not show as an option in "Startup Disk" in system preferences. But the Windows partition boots just fine when holding option on restart.

And since I can't edit my original post any longer, here's what fixed the redundant boot option thing:
http://hints.macworld.com/article.php?story=20091111185717745
Worked like a charm. Fixed the duplicate "OS X" option on boot, and both OSes boot normally. Can now click past the first few options in Boot Camp Assistant, so I'm assuming that's working normally now also.
Still no Windows option in Startup Disk, but apparently that's related to my use of NTFS-3g? Thought that was fixed.
sudo fdisk /dev/rdisk0 is now:
Disk: /dev/rdisk0 geometry: 30401/255/63 [488397168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 423624704] HFS+
*3: 07 1023 254 63 - 1023 254 63 [ 424298496 - 64098304] HPFS/QNX/AUX
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Only thing I'm worried about now is whether I might have damaged any files though any of this crap. Don't know if I can check for that, or if I should worry about it.

Boot Camp - Snow Leopard MAJOR ISSUE

Ok, I'm sort of new to the Apple arena and have been running a MacPro under BootCamp with Windows XP on the other side. I set BootCamp up to run Windows priority and thus to get the Apple side I held down the Alt key at start up and selected Mac HD to go to Apple.
Furthermore, I been working on the Apple side more and more to learn FCP. So, I recently updated FCS2 to FCS3 . . AND . . while at it updated to Snow Leopard. Now comes the change and the problem.
Since upgrading to Snow Leopard I had not started up Windows even once, because the boot up priority changed from Windows default to Mac default. Now perhaps that should have alarmed me but it didn't because again I am trying to get more FCP screen time to learn it and thus decided I liked that boot process and would just leave it.
Well, today I booted with the Alt key and selected Windows and sure enough Windows booted HOWEVER the mouse will move all over the screen BUT it cannot click or select anything on the screen. Also, when moving the cursor to the task bar an hour meter appears AND one can do nothing. In addition, right click does nothing and CntlAltDel does nothing, nor does Esc or any other key(s) for that matter.
I have two MAJOR pieces of work on the Windows side that I need to finish up that include over 200 man hours of work and even if I could just get it running for a matter of one day I would be fine because as I have already said, I am moving to FCP and those two are all that is left in Avid.
Any suggestions? Please anyone help. The one project could result in a major lawsuit that could cost me over 4000 + legal + the over 200 hours I have paid for already. Thanks in advance to anyone who responds.

OK I got it working but what a nightmare. I will outline it here for those so coming to the same threshold.
If the above happens try:
1. Boot and chose Win disc couple times.
2. Boot and chose Mac disc and insert the SL and explore not install.
3. Shut down.
4. Boot and chose Win disc.
5. Screen should now be operatble and the keyboard and mouse functional.
6. The last option is Boot Camp drivers.
Don't go haywire when it uninstalls all the drivers then installs them and they are not all there. Also, I'm not sure you even have to do all this although I let it in accordance with the way it suggested it wanted and it took me forever to get it all straightened up and I'm still updating Windows and the like.
Also, IE 8.0 simply WILL NOT install nor open any more and thus no Windows Updates. Looks like my Windows/BootCamp update has been ruined by the SL update. Bummer, cuz I will now have to re-set-up the 2, XW8200's that I just disassembled to get rid of and thus I'll be back on PC/Windows . . again!! :o(

ExpressCard SSD options to boot a Powerbook (Leopard)

Similar Messages

Maybe you are looking for