Expression for a cumulated key figures
I would like to make an expression for a cumulated key figure (I set "cumulated" in properties of this KF) in Query Designer 3.5. If I try to make an expression, I'll get an expression for a key figure, and not for a cumulated key figure.
Any ideas? Should I use query view?
Hi,
You may need to think about the Cell Editor concept here.
In of the report I need to take 12 calmonth2 values in the columns starting from a financial year.Here the financial startd from APRIL.
For each coolumn I need to show Average of sales value.Here Average means ,under APril month the value is April's sales value only.But for May ,I need to show like : (sales of April+ sales of May)/2.
Similarly for June: (sales of April+ sales of May+sales of June)/3.
So on ....
Here I used the cell editor concept to get the required out put.
I am take 12 selections in columns for 12 months .
I have taken Sales value 2 times into Rows and hidden the first KF. But in the cell editor: for second row's second cell I have defined a formula like : (second row's First cell+ First row's second cell)/2
Similarly for second row's thrid cell I have defined a formula like :(second row's First cell+ First row's second cell+ First row's third cell)/3.
so on..for other cells of Second row.
With rgds,
Anil Kumar Sharma .P
Similar Messages
-
When do you go for non cumulative key figures?
hi all,
Can anyone explain the significance of non cumulative key figures. and when do we go for non cumulative key figures.
Can anyone explain me with an example.
thanxs in advance
hariHi,
chk these threads:
non cumulative key figures
Cumulative and Non-cumulative Key Figures
also,
There is also an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Assign points if this helps!!
Regards,
Dhanya. -
Intregarted Planning Design for Non-Cumulative Key Figures
Hi,
I have a requirement where i have to design a planning layout for a Invenotry Scenario (Using Non cumulative Key Figures).
What should be the factors i should consider in my design specifically for non cumulative ke figures and how it is different from design for a regular (cumulative) key figure
Thanks
Rashmi.Thanks for your response. My requirement is to design a retail inventory planning application in which one of the KPI's planned is stock price which is a non cumulative key figure and i am trying to figure out how than can be planned if non-cumulative key figures are not allowed in planning
Thanks
Rashmi. -
Trouble with Non Cumulative Key Figures
Hi all of you,
I am working on Non Cumlative Key Figures, (NCKF). I have the data like this
Sales rep S100 visited SHOP S1 on 1st Jan and 10th Aug, and transacted worth 100 and 500
SHOP S2 on 1st Mar and 1st July and transacted worth 200 and 300
SHOP S3 on 3rd Sept. and transacted worth 400
Sales rep S200 visited SHOP S1 on 1st Jan and 1st Aug and transacted worth 100 and 300,
visited SHOP S2 on 1st April and transacted worth 200
I created Non Cumulative Key Figure in the following manners:
In modeling in InfoObjects I double clicked on my key figure BILLAMT and selected the Aggregation tab. I selected Counter (all values) for Exception aggregat. By default Agg. Referen. Char was 0calday. I then activated the info object and went to BEx. Here I took other IOs like Salesrep, Shop NUM and Dt. Of trans in rows and Bill amt in columns and executed the report. I am not getting the output how it should come for NON cumulative key figures.
But when I right click the key figure Bill Amount in BEx in change query mode and select properties. I go to the option Calculate result as and selected the option as Count all values. And in another option Calculate Single Value as I selected the option Count all values. I said OK, saved the query and executed it. Now the output is similar to how it comes for a Non Cumulative Key Figure query but I am unable to understand the output.
Now my doubt is where do we set the properties for Non Cumulative Key Figures? Is it in the Administrator Workbench under Modelling under InfoObjects?
OR
Is it in BEx change query mode by right clicking on the key figure and selecting properties?
Please explain.
Thank you
TR.As for the setting for Non Cumulative key figures...the default setting is done in the Key Figure properties, where u can define the Exception Aggregation. This property is used as such in the query, but if suppose u are getting the normal aggregation in the query , what you could do is "Create The Key Figure as Global Calculated Key Figure in Bex" and go to properties...click on the Button for aggregation ..select the aggregation and define with respt to 0CALDAY ..here.
Hope this helps. -
Difference between cumulative and non-cumulative key figures
Hi,
What is the difference between cumulative and non-cumulative key figures and under what conditions they are used. What is snapshort and where it is used.Hi.............
Basically the key figures are of two types cumulative and non cumulative.
Cumulative are the normal one which you use always and they always bring the new values of the key figures in the delta that is if suppose A has value 10 and after change the new value is 20 then you will use cumulative key figures there, and your delta( new value) will bring 20.
but suppose your key figures field only the change in the prior value that is in this case the delta in the key figure value will bring 10 (20-10- change of 10 )as new value in the key figure A then you will have to model it through the non cumulaitve key figures.
Now
1) Cumulative is for the first case that is if the key figure alwyas brings the new values of the key figure and not the change sin the key fiures value.
2)NCum. value with NCUM value change:
In this case ther is only one field which brings the changes for a particualr key figure and you ahve to define that key figure as non cumulative.
Ex: In case of stock only one filed brings both ingoing value and outgoing value so 10 ,-4,100,-34.....
In this case you will this option and use the key figure here in the space provided.
3) In this case you haev two separate key figures one for the inflow of stocks and one for the outflow of the stocks.
you use one key figure for the inflow and one key figure for the outflow.
The main key figure autiomatically takes care of the logic and gives the correct output upon the summation
net value of stocks( inflow- outflow).
Also do remember in this case the key figure for inflow and out flow are the basic key figures that is cumulative key figures.
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory. here the aggregation of key figure is based on the another info object
There are two different ways to define non-cumulative key figures:
Non-cumulative key figure with non-cumulative changes:
Before you can define the non-cumulative key figure, an additional cumulative key figure containing the non-cumulative change must exist as an InfoObject.
Non-cumulative key figure with inflows and outflows
There has to be two additional cumulative key figures as InfoObjects for non-cumulative key figures - one for inflows and one for outflows. The cumulative key figures have to have the same technical properties as the non-cumulative key figure, and the aggregation and exception aggregation have to be SUM.
Features of non-cummulative key figures
A non-aggregating key Figure.
Records are not summarized for Reporting
Exception Aggregation is being applied on these key figures on the level of one or more info objects usually with time .
Examples: Head Count, Account balance, Material stock
consider simple senario
Date Net Stock Quantity Sales Revenue
01.02.2005 40 1000
02.02.2005 50 2000
03.02.2005 25 3000
this is the query output if stock quantity has treated as cummulative and non-cummulative key figures
if stock quantity taken as a cummulative key figure
Date NET STOCK QUANTITY SALES REVENUE
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 100 6000
in the above result the key figure has aggregated to the total value that wont give sense to the net stock quantity
if stock quantity taken as non-cummulative key figure
Date Net Stock Quantity (LAST) Sales Revenue
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 20 6000
Hope this helps you..............
Regards,
Debjani................
Edited by: Debjani Mukherjee on Sep 15, 2008 7:22 AM -
Validity table for a Non-Cumulative key figure
Hi,
I need to make changes to a validity table for a Non-Cumulative key figure.
I know initially it is done thru Extras- > Maintain Non-Cumulative value but subsequently how to change the parameters ?
Best Regards,
-Anurag DevIf you decide later that you require more validity-determining characteristics, you can modify the selection using the report RSDG_CUBE_VALT_MODIFY. In this report, the non-cumulative InfoCube is only changed to the extent that the new validity-determining characteristics are selected and the validity table is reconstructed. The structure of the non-cumulative InfoCube remains the same. You do not have to reload the transaction data for it.
-
Problem with Non-cumulative key figure.
Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. <b>This cube is defined by me to test the non-cumulative key figure.</b>
<b>In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.</b>
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi RBeing a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra -
Non-Cumulative Key figure with inflow & outflow
I am using some non-cumulative key figure in our inventory cube, however, I could not find the non-cumulative field in E or F table of the cube?
Is there a separate table to hold the reference unit. If so, what is the table name.
Thanks.Hi,
Go to t-code RSDV and enter the tech.name of your cube that has the non-***. key figure and you will see a validity table. This is only thing I know that will make you look at validity table.
The unit for the Non-*** KF will be the same unit as its inflow and outlow parameters' unit.
Thats my 2 cents on the matter.
Reddy -
Non cumulative key figure is not getting filled based on inflow and outflow
hi,
i have a non cumulative key figure which is having inflow and outflow.
i have these three info objects in dso.
as i know non *** key figure is calculated based on inflow and outflow.
i am getting values for inflow and outflow so non *** should be calculated based on this values.
<b>but the collumn is blank in the dso</b>
in that non *** keyfigure i have added two info objects in inflow and outflow.
is there any other setting i nedd to do?
please sugest me.
its urgentHi Venkat,
Have you followed the process right. First Filling the Initial Stocks and then Inflow and Out Flow and then Delta. If you follow the process correctly then you can able to view the Data in the Reporting Level.
For Initial Stocks the Marker Should be set. For Inflow and Outflow the Marker should not be set.
Hope This Helps,
Regards,
rik -
Snapshot scenario or non cumulative key figure in inventory management
Hi
We are currently using Inventory Management with non-cumulative key figures but we get very high performance problems due to so big number of lines in info cube.
We are analyzing the other scenario with snapshot and I am asking if it would be very realistic to use it to satisfy our requirement: to be able to get inventory management at day level for about 2 000 000 combinations article-site and about 100 000 stock movement lines per day (we are retailer!).
Is there somebody to give me advice about it?
Tanks a lot
AnneBeing a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra -
Bad performance with non-cumulative key figures
Hi All,
I have a cube with 8 non cumulative key figures based on fiscper.
I am not sure how the performance for reporting with non-cumulatives can be improved.
Thanks
KarenPerformance of non cumulative cubes is dependant on the distance between the marker (date of the last compression) and the execution date.
For actual stock, the more you compress the better it is.
Regards,
Fred -
Using Non cumulative key figure in Real time cube
Hi gurus,
I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
Thanks in advance
Regards,
RavikanthHi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee. -
InfoProvider with non-cumulative key figures
what does infoprovider with non-cumulative key figures...
noncumulative key figures..
looking for replyit's property of the KF... nothing do with Cubes or ODS.
Name itself telling non-Cumulative KF. We can't cumulate this KF. Suppose take the Case Sales Amount and No of Employees. Sales Amount can be cumulated over Time. But No Employees can't be cumulated. Same is the Case with Stock as well.
Nagesh Ganisetti. -
Planning on Non-Cumulative Key Figure
Hello,
is it possible to plan data on a non-cumulative Key Figure?
SAP_ABA 701 0005 SAPKA70105 Cross-Application Component
SAP_BASIS 701 0005 SAPKB70105 SAP Basis Component
PI_BASIS 701 0005 SAPK-70105INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0001 SAPKITLRD1 SAP Solution Tools Plug-In
SAP_BW 701 0005 SAPKW70105 SAP Business Warehouse
BI_CONT 704 0003 SAPK-70403INBICONT Business Intelligence Content
ST-A/PI 01L_BCO700 0000 - Servicetools for other App./Netweaver 04
We implemented also the How-to Paper Copy and Paste in the Web Template but it isn't working in a proper way. UnderPrerequistes in the How-to Paper I found IE 7.0 and Clipboard. But I was informed that we have an higher Level.
Thank you in advance for your help.
Kind Regards
DorisNot possible.Please find the help link for more details.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/1c3c7031b70701e10000000a422035/content.htm
Regards, Hyma -
Cumulative key figure and non cumulative key figure
Hi BW Expertz
Could any one give me the clarification about cumulative and non cumulative key figures .Why we go for cumulative key figure and non cumulative key figure.If any docs could u just mail to the following [email protected]
Thanx In advance
Best regards
sankar prasadCumulative values are those key figures (KF) that are cumulated using all characteristics, thus also using time.
Ex: Sales revenue, Quantity....
Non-cumulative values are those key figures that are measured in relation to a period in time; they cannot be meaningfully cumulated over time. Non-cumulative values are summarized over time using so called exception aggregation.
Ex: Number of employees, Inventory, Stock prices, Account balance,.....
AGGREGATION TAB
Non cumulatives are evaluated by non-cummulative values. Non-cummulative values are special key figures that are different from other key figures (cummulative values) in data transfers and saving as well as in aggregational behaviour. These are measured in relation to a period in time; that is to say, they cannot be meaningfully cumulated over time. Non-cumulative value are summaraized over-time using exception aggregation.
Non-cumulative values such as 'number of employess' are cumulated using characteristics such as 'cost center'. It does not make any sense, however, to cumulate the number of employees using different periods. The result at the end of any particular period would be the sum total of number of employees for each posting during the period. This would of course be wrong.
Instead, the aggregation of the KF can be defined as exception aggregation wherein an additional references characteristics is utilized to tell BW which value to use during the period, in this case, 0CALMONTH is used, in the above example, to indicate that only the last value of 0HEADCOUNT, updated by costcenter, is to be taken for any calender year and month.
Cummulative vs Non-Cumulatives
The purpose of non-cumulatives is to optimize the data transfer in BW, the data retention and the database access. The data transfer from OLTP to BW is minimized and only the meaningful data is saved and processed.
It is recommended that you use non-cumulative values for areas that dont change frequently such as warehouse stock or number of employees.
Non-cumulatives are modeled in BW using a non-cumulative value with the fields belonging to it for storing the non-cumulative or for inflows or outflows.
Non-cumulative values are stored with special KF that differ in terms of data transfers and aggregational behaviour.
Features of NON-Cumulative Values Transfering and Saving Data:
- NC values are mapped uisng one KF for NC changes or two KF for inflows and outflows.
-NC are transferred in an initialization run and the change runs that follow (initialization can also be omitted here)
- A non-cumulative value always has a time-related exception aggegation.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.htm
with Example
Re: Non-Cumulative keyfigure example
Re: Types of non-cumulative keyfigures
/community [original link is broken]
/community [original link is broken]?forumID=131&threadID=29557&messageID=273049
/community [original link is broken]?forumID=131&threadID=111914&messageID=1248243
****Assign Points If Useful*********
Maybe you are looking for
-
How to access a PC formatted external hard drive
I am trying to access a PC formatted external hard drive, however when I attempt to mount it I get a message saying the drive is not recongnized and if I want ti initialize, which i believe if I execute will remove the files I am trying access..Is th
-
Timeout error in webdynpro abap
Hi All. I am navigating between two web dynpro components through inbound/otbound plugs. I am able to navigate betwwen them for two times the third time I try to navigate it gives the following dump: Error when processing your request What has happen
-
Privacy settings keep resetting on my mac
First of all... I'm running: OS X Version 10.9.5 Processor: 1.86 GHz Intel Core 2 Duo Starting today safari opens pop-ups anytime I click on a link or button. I also noticed that my privacy settings keep changing from "third parties and advertisers"
-
Sliders for iBook's widget built in iAd producer
I am attempting to build a widget that features sliders (general object) for iBooks in iAd producer. I added sliders in iAd Producer; have a minimum setting of 0.0, maximum of 10, and moving at increments of 0.5. I tested them in the preview funciton
-
Menu button to download Pdf file on the application
Hi, I have a AM method that takes in some parameters and generates xml data and then calls the BI Publisher report service and generates a PDF providing the xml data as input. The method needs to have a file download action listener so that the Pdf f