Expression pedal not working in Logic after upgrading to Lion

I'm having a problem where Logic 9 isn't recognizing the expression pedal (CC#11) MIDI messages coming from my M-Audio Axiom 61 keyboard after I upgraded to Lion. I've reset the settings on the Axiom, made sure the pedal was set properly and plugged in to the correct port. (Also, it's an m-audio expression pedal) The display on the Axiom says it's receiving the midi controller messages. Logic is receiving the mod wheel and pitch bend messages, and sustain pedal messages. On the midi activity monitor in the transport bar and in the environment clicks and ports window, it's the same. Everything but the CC#11 messages are coming through. Also the expression pedal DOES still work in Mainstage.
I've also tried creating a new Logic project, but it still doesn't work.
Any ideas?

Also, for the sake of experimenting, I assigned the Axiom to convert the expression pedal messages to CC#2. When I did that, Logic DID receive it (as CC#2). So then in the Environment clicks and ports layer, I made a transformer object to turn it back into CC#11. So that's my work around for now.
Also, I tried, on the Axiom, assigning my Mod wheel to CC#11 (so that it's sending CC#11 to Logic when I move the mod wheel.) And then Logic also DIDN'T receive it at all.
So it seems that Logic doesn't like paying attention to CC#11 messages right now.

Similar Messages

Fullscreen mode not working in aperture after upgrading to Lion

I recently upgraded to Lion and Aperture is not working at all in Full screen mode. I have followed the ideas in the forum (unchecking the preferences for spaces) and nothing has worked. I have reinstalled the Aperure update and this did not work either. Any other ideas?
regards, Jim

Jim,
Try this:
if Aperture is running, quit;
control click Aperture's icon in the dock;
in the menu that pops up, navigate to the Options sub-menu;
make sure "None" is selected in the "Assign To" section at the bottom.
Mine was originally set to "This Desktop", probably as a hold-over from Snow Leopard, where I had Aperture assigned to its own Space. After I updated to Lion, Aperture was misbehaving in full screen mode until I changed it to "None".
I hope this helps...
- Bob

Crossfades do not Work in Logic 9 (upgraded) - Anyone else having this prob

This started occurring after upgrading to Logic 9 (from 8) and before I put in Snow Leopard. If I copy a region to another place and then try to create a crossfade - first the region boundaries of the pasted-in region disappear (so I have to put the playhead where the front boundary should be so I know where to put the crossfade) -- I can put a crossfade there that way, but then the region which follows won't play (is muted, though no mute function appears). Also, I cannot create a crossfade on the right edge of the pasted-in region. This for sure happens if I use Command C/V to copy and paste int he g=region. Occasionally it works correctly if I option click drag (but even then it doesn't work all the time). I think this is a Logic 9 only problem. Anyone else encounter this??

MS3 is compatible with Logic Pro X's plugins and presets as per it's description....
MainStage 3 lets you take your Mac to the stage with a full-screen interface optimized for live performance, flexible hardware control, and a massive collection of plug-ins and sounds that are fully compatible with Logic Pro X.
MS3 also only uses 64bit versions of AU Pluginsas per its minimum specs.. just as LPX does.... whereas LP9 and MS2 could use 32 and 64bit versions...
Minimum System Requirements
4GB of RAM
Display with 1280-by-768 resolution or higher
OS X v10.8.4 or later
Requires 64-bit Audio Units plug-ins
Minimum 5GB of disk space (35GB of optional content available via in-app download)
It's kind of like why you can convert projects from LP9 to LPX but not from LPX to LP9.....
MS3 is desgined to work with and utilize LPX's sounds/instruments/patches etc.. and not LP9s.....
Finally, as an aside.. please note, this forum is not how you contact Apple...
Please read the following info to understand why this is so....
https://discussions.apple.com/docs/DOC-5671

Web Query (.iqy) not working in Excel after upgrade to 11.1.1.6

After upgrade 11.1.1.5 to 11.1.1.6, the Web Query (.iqy) does not work. After open the .iqy file in Excel, entered the user and password, it only pulls in "PK" in one cell, instead of the expected analysis report. This was working in 11.1.1.5 before upgrade.
Does anyone know how to correct this issue? Is this a bug in 11.1.1.6, or required some new configuration settings?
Thanks in advance.
DX

A bug has been registered.
Bug 14040587 - OBIEE 11.1.1.6: OPENING WEB QUERY (.IQY) FILE IN EXCEL SHOWS JUNK CHARACTERS.

Simple Query working on 10G and not working on 11gR2 after upgrade

Hi Folks,
This is the first time i am posting the query in this Blog.
I have a small issue which preventing the UAT Sigoff.
Simple query working fine on 10.2.0.1 and after upgrade to 11.2.0.1 its error out
10.2.0.4:
=====
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1;
COUNT(*)
1
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=00001;
COUNT(*)
1
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1;
ATTRIBUTE1
00001
11.2.0.1:
=====
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1
ERROR at line 1:
ORA-01722: invalid number
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=00001
ERROR at line 1:
ORA-01722: invalid number
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='1';
no rows selected
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='00001';
COUNT(*)
1
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='00001';
ATTRIBUTE1
00001
++++++++++++++++++++++++++++++++++++++++++++++
SQL > desc APPS.HZ_PARTIES
Name Type
======== ======
ATTRIBUTE1 VARCHAR2(150)
++++++++++++++++++++++++++++++++++++++++++++++
Changes:
Recently i upgraded the DB from 10.2.0.4 to 11.2.0.1
Query:
1.If the type of that row is VARCHAR,why it is working in 10.2.0.4 and why not working in 11.2.0.1
2.after upgrade i analyzed the table with "analyze table " query for all AP,AR,GL,HR,BEN,APPS Schemas--Is it got impact if we run analyze table.
Please provide me the answer for above two questions or refer the document is also well enough to understand.Based on the Answer client will sigoff to-day.
Thanks,
P Kumar

WhiteHat wrote:
the issue has already been identified: in oracle versions prior to 11, there was an implicit conversion of numbers to characters. your database has a character field which you are attempting to compare to a number.
i.e. the string '000001' is not in any way equivalent to the number 1. but Oracle 10 converts '000001' to a number because you are asking it to compare to the number you have provided.
version 11 doesn't do this anymore (and rightly so).
the issue is with the bad code design. you can either: use characters in the predicate (where field = 'parameter') or you can do a conversion of the field prior to comparing (where to_num(field) = parameter).
I would suggest that you should fix your code and don't assume that '000001' = 1I don't think that the above is completely correct, and a simple demonstration will show why. First, a simple table on Oracle Database 10.2.0.4:
CREATE TABLE T1(C1 VARCHAR2(20));
INSERT INTO T1 VALUES ('1');
INSERT INTO T1 VALUES ('0001');
COMMIT;A select from the above table, relying on implicit data type conversion:
SELECT
FROM
T1
WHERE
C1=1;
C1
1
0001Technically, the second row should not have been returned as an exact match. Why was it returned, let's take a look at the actual execution plan:
SELECT
FROM
TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,NULL));
SQL_ID g6gvbpsgj1dvf, child number 0
SELECT   * FROM   T1 WHERE   C1=1
Plan hash value: 3617692013
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      |       |       |     2 (100)|          |
|* 1 | TABLE ACCESS FULL| T1   |     2 |    24 |     2   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter(TO_NUMBER("C1")=1)
Note
   - dynamic sampling used for this statementNotice that the VARCHAR2 column was converted to a NUMBER, so if there was any data in that column that could not be converted to a number (or NULL), we should receive an error (unless the bad rows are already removed due to another predicate in the WHERE clause). For example:
INSERT INTO T1 VALUES ('.0001.');
SELECT
FROM
T1
WHERE
C1=1;
SQL> SELECT
2    *
3 FROM
4    T1
5 WHERE
6    C1=1;
ERROR:
ORA-01722: invalid numberNow the same test on Oracle Database 11.1.0.7:
CREATE TABLE T1(C1 VARCHAR2(20));
INSERT INTO T1 VALUES ('1');
INSERT INTO T1 VALUES ('0001');
COMMIT;
SELECT
FROM
T1
WHERE
C1=1;
C1
1
0001
SELECT
FROM
TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,NULL));
SQL_ID g6gvbpsgj1dvf, child number 0
SELECT   * FROM   T1 WHERE   C1=1
Plan hash value: 3617692013
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      |       |       |     2 (100)|          |
|* 1 | TABLE ACCESS FULL| T1   |     2 |    24 |     2   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter(TO_NUMBER("C1")=1)
Note
   - dynamic sampling used for this statement
INSERT INTO T1 VALUES ('.0001.');
SELECT
FROM
T1
WHERE
C1=1;
SQL> SELECT
2    *
3 FROM
4    T1
5 WHERE
6    C1=1;
ERROR:
ORA-01722: invalid numberAs you can see, exactly the same actual execution plan, and the same end result.
The OP needs to determine if non-numeric data now exists in the column. Was the database characterset possibly changed during/after the upgrade?
Charles Hooper
Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

Send button not working on sms after upgrade

My send is no longer working on sms after i upgraded. I have done factory setting and still not working . Any ideas of anything else i can try ? frustrated

I have same problem. Can open message. As if keyboard is frozen.
Unable to type then send. Also, tried shutting off preview.

Calender not working in 4s after upgrading to IOS 8 and and after synching with my new iphone 6 , calender not working in 6 as well. Please help.

Hi my old phone 4s after upgrading to IOS 8, Calender is not working. Just a blank page and it quits automatically. I bought a new iphone 6+ and after synching , it also showing the same issue.

There's no way a software update causes a hardware issue. This is just coincidental. Bring your phone to Apple for evaluation and possible replacement.

BINARY SEARCH does not work as before after upgrade

We recently upgraded from HRSP 26 to HRSP 40 as well as similar upgrades in non-HR areas on our ECC 6.04 system. We've been in SAP since 1998, and have a lot of old custom programs which were written when we were still new at ABAP. In a few, we put records into an internal table sorted the table, maybe added a few more records to the table, and did a READ BINARY SEARCH. Granted, this is not correct, adding records to a table after it is sorted. But these programs have worked for more than 10 years and now, since our upgrade, the READ BINARY SEARCH does not always find a record where it did before the upgrade.
So this is mostly just a heads-up. If you are missing data in reports after upgrading, this might be the issue. Also I am wondering if anyone has experienced this.
Heads-up!
Janice Ishee

Hi Janice,
you did not give any context. Please note that it is a popular error to think that a SELECT statement will fetch data in order of the primary key of the table - although it happens quite frequently. So always first sort, then binary search.
Probably not related to upgrade.
Regards,
Clemens

Ipod not working in car after upgrade

After an upgrade ipod touch shows unreadable in my volvo s80 2010

cjwj, downgrading the iOS is not supported by Apple and the method you outlined does not work. When restoring an iPod, iTunes contacts Apple and will only allow restoring using the latest available update file.
flcolvin7, Contact Volvo and get them to issue a firmware update for the car.

IPhone does not work in car after upgrading to os5

After upgrading to os5 my build in hands free device does not work properly anymore, lot of noise, disconnects, connects in general not usable anymore.
How to fix this?

Does your aftermarket solution connect to the Nano's headphone jack or to the dock connector?
If it connects to the headphone jack I would suggest buying an iPhone headphone adapter. I'm expecting mine to arrive via FedEx tomorrow so that I can use my iPhone in the car with a cassette adapter.
Hope this helps.

Google Talk not working with Messages after upgrade to Mountain Lion

After upgrading to Mountain Lion, I'm no longer able to use Google Talk with the new Messages App. It worked fine on iChat, but now I cannot enable the account. When I try to check the enable box, it immediately unchecks itself and nothing happens. Any suggestions?

Welcome to Apple Communities
Open Finder, press Option key and select Go > Library. Open Preferences and delete com.apple.imessage.bag.plist and com.apple.imservice.iMessage.plist

Sound effects not working with SoundSticks after upgrade to 10.4.4

After upgrading to 10.4.4, the sound effects of OS X, such as emptying trash, iChat effects, etc, doesn't come out from the SoundSticks (first generation, connected via USB), even though I've turned it (effects) to the highest level, and selected to have it come out of the SoundSticks.
The effects are fine if I select Built-in Audio as sound output.

The names are updated to the following (although the documentation doesn't reflect this):
addDataSourceConnectionPool == createJDBCConnectionPool
addManagedDataSource == createManagedDataSource
addNativeDataSource == createNativeDataSource
testDataSourceConnectionPool == testConnectionPool
Hope it helps ...
Cheers!
Nimesh

DVD drive will not recognize blank DVDs after upgrade to Lion.

It finds burned DVD/CDs but not blank ones. Disk utility partially sees blank dvd, gives option to eject it, but will not allow eject it. Finder does not see it at all. have to restart to have it eject. Tried different DVD's (Manufactures and -R / +R, etc). Have followed recommendations on resets and have even reloaded the OS. This problem started immediately after upgrade from snow lepoard to lion.

Repairing permissions yes. But in my head, if everything is working fine for it, just won't read Blank media, could it be a software thing?
I'll give it a shot in a few hours

ITunes devices will not detect digital copy after upgrading to Lion

Hi, I recently bought a Blu-Ray that came with a digital copy. I know there are two types, as I get a lot of them. This is one of the ones where the file is copied from the disc itself. (Not one where you just enter a code and download the file.)
I put the disc in the computer and iTunes will not recognize it. I have done many of these before and never had this issue. It cannot be the disc funtionality as the DVD player will play it and the Finder recognizes it. (It is the right disc too! I didn't accidentally insert the wrong one.) I am wondering if it has anything to do with upgrading to Lion and iTunes 10.5.
Is anyone else experiencing this problem, or does anyone know how I can fix this?

Dsimagry,
Thanks for your reply. I did check the software updates for the system and iPhoto, which told me I was up-todate.
I do not see the camera come up as a drive on the desktop or in finder. In fact I don't believe that I ever did. I always used to open iPhoto and turn the camera on. Then iPhoto would ask me if I wanted to import the photos. This seems to have stopped since I installed the upgrade for Lion. I know the camera works, as I took it to my wife's Mac Mini that has Tiger and it connected and imported the photos fine. I have tried what another person stated in a post where someone else had a problem with an Olympus camera and that was to redo the disk permissions. It helped that person, but did not help me. They also stated looking for the device in Image Capture and iMovie, but my camera is not showing up there. I am suspecting that there is some going on with the OS Lion that is preventing my camera and Compact Flash memory card from being recognized. If I cannot get this fixed I may have to revert back to Snow Leopard.

Korg Nanopad not working in Garageband since upgrading to Lion

I've just upgraded to Lion and the new update to Garageband but have found that my Korg Nanopad's not working anymore. I've got a Nanokey and that's fine but not the Nanopad. I've Downloaded and installed all new drivers etc... but still no luck and strangely now I can only get Mac to recognise one midi input at one time where I used to get the ability to run two at once in Snow Leopard. I get the light on the unit and when I tap the XY pad, I see a little dot appear in Garagebands LED area but none of the pads are making sounds like they used to. Not sure if it's a note mapping issue but have hit the frustrated level now.
I'm hoping someone can shed some light as it used to be pluginplay goodness.
Many thanks.

Have you tried using the editor? to set the notes on the Nano? Maybe something in your set up got wiped in the updates?

Expression pedal not working in Logic after upgrading to Lion

Similar Messages

Maybe you are looking for