Exqc me but new here.. sample rate in new project? and the way to it..

Im on 8.0.0 and on every new project logic 8 starts in 44,1 16 bit??
My entire system is 24bit/48khz..
The only way to change setting is in prefs.. song prefs (go to midi ??? settings) go to song setting audio and there change samplerate..
Is it just me, or what??
( sorry if you have covered it before..) ( soundcard motu 2408 mk3 + 8xadat in )

sorry my mistake..
did that.
still even if i make my new templates ( only work with my own) 24/48, logic "decides" to start in 44,1.
I ( used to ) use my enviro to midi and CC# control 5-8 external boxes, so i need to make my own set up/template..
Still must check If I can make a new template where default is 48/24..
If yes I get back..

Similar Messages

I've been using FCP 7 on my iMac for quite some time with great success. Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug) I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years. I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

YOU ARE A LIFE SAVER! I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

What 's the meaning of "sample rate =-1" when to use the CAN init.vi?

ALL,
I saw a kind of use to CAN init.vi where The mode = "output recent" and the sample rate = -1. I check the NI CAN help document, it seems that the sample rate must be large than 0 when the mode = output recent. So,here,why the sample rate can be -1? What does it mean?
Thanks!
Lai

I found that it is different whether to use "-1" or ''0" to sample rate. In CAN init.vi, there is an input parameter filepath which is used to load the ncd file or dbc file. The ncd file can't set the sample rate of CAN message, but dbc file can. When I use sample rate = -1 and dbc file , the period(=1/sample rate) of CAN transmission equals the Sample time defined in dbc file and is not determined by loop time in LabVIEW programm. But when I use sample rate = 0, the period of CAN transmission equals the loop time in LabVIEW programm. So I guess the period of CAN transmission is determined by the Sample time defined in dbc file when use sample rate = -1. Is that true?

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

Matching sample rates of capture preset and tape

After upgrading to FCE 3.5, I don't have the dropped frames problem anymore and the audio is in sync but every time I'm done capturing a clip from my camera I get an alert saying the audio sample rate of captured media files don't match the sample rate on source tape.
So, I gather that the sample rate capture preset must equal the sample rate of the tape. So I need to know two things:
1. How do I set the sample rate capture preset? I've looked everywhere I can think of.
2. How do I find out what the sample rate of my tape is? I've looked in my Sony FX1's settings and can't find anything.

Hi(Bonjour)!
Your FX1 sound settings can be found in audio menu, select 16 bit if you shoot in DV format.
Audio settings for HDV is not adjustable.
Your sequence and capture settings have to match the properties of your captured clips.
Select DV-NTSC 48kHz in easy setup. (for DV)
or Apple intermediate codec 1080i60 for HDV.
Michel Boissonneault

I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

OK, lets do a complete overhaul to make sure it's working ok.
First to check your Windows system file for any corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer.
Start iTunes and see if it is ok.
If it doesn't, will have to go through the whole process of uninstalling and installing acccording to the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
(Referenceinstructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components)
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

I have a spinning wheel in Mail - stuck on trying to load a new message. I've force quit both Mail and my whole computer, but when I open mail again, it brings up the same new message - and the side bar curser is stuck in Drafts. What can I try to cancel

I have a spinning wheel in Mail - stuck on trying to load a new message. I've force quit both Mail and my whole computer, but when I open mail again, it brings up the same new message - and the side bar curser is stuck in Drafts. What else can I try to cancel

Can you log on to the email account via webmail in a web browser, view the email and delete it from there if necessary.

I have been trying to get my iPhone to sync with a new computer. As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone. How do I get the apps on the old one to the iPhone and then the new c

I have been trying to get my iPhone to sync with a new computer. As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone. How do I get the apps on the old one to the iPhone and then the new computer?

You don't. Backup your itunes library on the old computer and move it to the new computer.

Just purchased a new iPad and the sound works on Siri, music, videos, alarms, but on games it will not. Is this a preference or perhaps a defective unit.

Just purchased a new iPad and the sound works on Siri, music, videos, alarms, but on games it will not. Is this a preference or perhaps a defective unit.

Double-click the Home button and swipe the Task Bar (at bottom) to the right. Check volume and mute settings.

I just purchased a Canon 7D Mark II, new DellXPS and the Lightroom 5.2. The Lighthouse is not openinging the 7DMark II but does open the older 7D that I imported. I checked the Abode update page and do not see one for the 7D Mark II. Please say it is t

I just purchased a Canon 7D Mark II, new DellXPS and the Lightroom 5.2. The Lighthouse is not openinging the 7DMark II but does open the older 7D that I imported. I checked the Abode update page and do not see one for the 7D Mark II. Please say it is there - if not when. I am "on hold till its done. Thanks.

Update to the current release, which is Lightroom 5.7.1. You can do this from the Lightroom help menu and choosing updates.

After updating ios6 I can't access my downloaded iTunesU videos anymore. They come up in search but video app says 'no videos'. I have the new iPad and the latest version of iTunesU.

After updating ios6 I can't access my downloaded iTunesU videos anymore. They come up in search but video app says 'no videos'. I have the new iPad and the latest version of iTunesU. How can I get the video app working with the iTunesU again?

I have a similar problem with ITunesU, I used to be able to access them from my car dock, but now they dont appear and the fwd/back buttons on the steering wheel wont affect them.
It seems taking them from ITunes into their own app has confused many other applications or dock connectors. Im going to try and remove the ITunesU app as I dont want to have lost the extra functionality

I'm trying to setup my new iphone and the Apple ID it asks for is my friends old Apple ID that she no longer has access to. How can I fix this?

I'm trying to setup my new iphone and the Apple ID it asks for is my friends old Apple ID that she no longer has access to. How can I fix this so I can use my new phone? The first step asks for my iCloud info but then asks for my friends after I agree to the terms.

The iPhone is new, has never been used. When asked if I want to set it up as a new phone, restore from an iTunes backup, or my iCloud backup I selected iCloud. It then askes for me to sign in with my Apple ID, I then agree to the terms, then it asks for me to sign into my friends Apple ID. She and I have used each other's computers in the past so I assume this is where her information is coming from. The problem is she no longer had that email or Apple ID and has no way of gaining access to it and therefor I am unable to proceed.
I suppose my question is, how can I remove her information from mine so I can setup my new phone using iCloud. Also, I have already checked my Apple ID online and nowhere on my account is her information listed.

I have an iphone 4, and its the first edition... i need a new phone and the latest is the iPhone 5. im wondering if apple will release a new phone soon or should i go with the iphone 5?

I have an iphone 4, and it's the first edition... I need a new phone and the latest is the iPhone 5. I'm wondering if apple will release a new iphone soon or should i go with the iphone 5?

No one here would know Apple's plans. But, if past history holds true, expect a new model iPhone sometime between now & the fall.

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

Exqc me but new here.. sample rate in new project? and the way to it..

Similar Messages

Maybe you are looking for