Exs 24 Help desperately

Ok I really need some expert help here..I have installed Logic Studio on a seperate drive along with new osx..I didnt update Logic 7.I just installed Logic Studio I need to know the fastest and most reliable way to relink my exs instruments and samples..I have about 180 gigs of instruments...I also have the exs manager by redmatica if that helps..I just need a step by step method for getting my system up and running..without those dam error messages. missing sample not found..any help from you gods of the logic throne would be greatly appreciated..I am a expert on samples and sampling and I know just about every sample that has been used on mainstream records..so maybe we can trade info or sounds or whatever i just need a fool proof fast way to make my system rock...thanks in advance ..

Simply make sure your sampler instruments file (not your samples..... just the instruments) is in the associated file for LP8, EXS finding the samples shouldn't be a problem, this is usually very intuitive and pretty much automatic unless you have duplicates.
Do you really know every sample used on every record?
Pretty bold claim my friend, if the recording career doesn't work out I'm sure musicology is a route you can go down.

Similar Messages

LR 4 only prints a blank page on Epson 2880. Print preview panes remain blank. Window 7 OS. Need help desperately!

LR 4 only prints a blank page on Epson 2880. Print preview panes remain blank. Window 7 OS. Need help desperately!

Bob
Thank you for your kind consideration of my problem. Up until the software started to print blank pages the preview pane always showed the selected print within the selected layout. Something has changed. Lightroom will print to the JPEG file but only a blank page on the Epson 2880. I've been in contact with Epson support and an IT tech and they tell me the problem is with Lightroom. I'm at my wits end and thinking of upgrading but the glitch may carry over. Uninstalling and reinstalling and deleting the preferences file did nothing to rectify the situation.
Thanks again!
David

Outlook 2007 backup help desperately needed

I am moving in less than a week and I desperately need to back up my Outlook to an external drive because my desktop computer
is going on the moving van. I added the Outlook backup add-in today, but it is not working. I have it set (under options) to save to K:\Outlook\outlook backup.pst When I exit Outlook, I get this message: The J:\Outlook\folder does not exist. The file might
have been moved or deleted. Do you want to create it?
How can I get it to stop looking for a J drive? I don't have anything in my J drive, so even if I choose yes to create it, it is unable
to create the Outlook folder and the system cannot find the path specified.
Steps I have tried so far, which have failed:
1. Reboot the computer
2. Disable and re-enable add-ins
3. Delete and re-install the add-in
4. Try saving to a different external drive

Hi,
Change the backup location of a personal folder to any other drive apart from J:\drive as it doesn’t exist in your computer.
To change the backup location of a personal folder file:-
1. On the File menu, click Backup.
2. Click Options.
3. In the Backup these personal folders files list, click the file you want to change the backup location for, and then change the location in
the Backup the file selected above to this location box.
4. Click OK.
5. Click Save Backup.
I hope the information is helpful.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Locked out of iphone 5s. Help desperately needed.

Have locked myself out of my iphone (5s), can't remember my password and it wont let me use my fingerprint. Have tried to restore it but the problem is it requires me to turn icloud off and to do that I need to type my password in. I also followed some silly advice and have deleted the find my iphone from my mac so that won't help it. It's very new and am panicking a lot, please please elp!

Google "iPhone recovery mode".

TS1717 Since upgrading my ipad to os7 I can no longer get my ipad to load up my music from iTunes. Same with my ipod. I have an iMac OS 10.5.8 Help desperately needed please

Can anyone help please.? Since upgrading my Ipad to OS 7 I can longer access my music on iTunes. iTunes says upgrade to version 11.1 but my IMac will not allow this. My Ipod won't upload either. Help!

You need to buy a Mac OS X 10.6 DVD, install it, and run the 10.6.8 combo updater. Mac OS X 10.6 requires a Mac with an Intel CPU and at least 1GB of RAM.
(94902)

Help Desperately Needed to restore Photoshop 10 catalog to Windows 8 computer and PSE 11

I am trying to backup my Photoshop Elements 10 catalog from my old computer running Windows 7 and restore to my new computer running Windows 8 and Photoshop Elements 11. I reconnected missing files, optimized and repaired the catalog, then repaired and re-indexed visual similarity date. I backed up to the hard drive on the old computer, copied the files to the external hard drive, copies the files from the external hard drive to the desktop of the new computer. From there I opened PSE 11 organizer and tried to restore. When the restore is almost complete I get the following error: "error encountered while restoring. It's recommended that you contact the disc drive manufacturer and upgrade to the latest available firmware for your specific disc drive before trying again.". I also had disabled the virus protection on both computers. I have contacted the external hard drive manufacturer and they are confident the problem is not with the external hard drive. I have spent countless hours on chat with Adobe Technical Chat. I have done everything that has been suggested to fix the problem and I still get the same error message. They referred me to their 800 number for paid technical support and I was on hold for a total of 4 1/2 hours and after being trransferred several times no one came back on the line to help. I have an open case with them and they still have not returned my calls. I even tried using the same backup catalog file and restored to another PC running Windows 7 (and Elements 10) and it worked. Why can't I restore the catalog to Windows 8? Any help is greatly appreciated!

Please refer to following link:-
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catal og-photoshop.html

SOLVED : HELP Desperately seeking 1.50.6 firmware for my WRT54GS V6.

Hi everybody,
No firmware on this router works for access restrictions but 1.50.6. I had it from the beginning but unfortunately upgraded to newer release and Linksys seems unable to retrieve it (!!!).
The problem : if I want to LOCK some (game) ports on a schedule, I have to AUTHORISE access EXCEPT for those ports, but then any access to the internet is impossible out of the authorised schedule.
More, 2 AUTHORISATIONS lock mutually : if you AUTHORISE Monday and Friday using 2 DIFFERENT rules, any access becomes impossible 24/24 and 7/7, even on Mondays and Fridays! Unbelievable.
Could anyone find this 1.50.6 firmware?
I tried all other releases available on Linksys sites or sent by the customer service (1.50.7, 1.50.9 and 1.52.0). None of them works and they even have some other minor bugs which are not in 1.50.6).
Thanks for your help. I would not have anymore to enable / disable some rules manually every day to prevent the kids spending all their time playing network games (mainly World of Warcraft).
Message Edited by jccarrier on 05-06-200710:11 PM

Here is the link for 1.50.6 firmware. It is in German which is not a problem for me. I couldn't find it in French or English. It is proposed for V6 only but it is compatible with V5.1. I use it on a V5.1 now. But it includes some bugs in DHCP (2 computers can be assigned the same IP address), so I don't use DHCP. Linksys' hotline told me they will work on a new release that will work for both access control and DHCP.
Hope this can help.
http://www-de.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=DE%2FLayout&cid=1129930115...

Please help, desperately need to get iTunes back on my computer

Hello all, I will make this as short as possible.
I just installed a new, larger and faster HD on my Dell Inspiron 5150. It is the same brand as the other and is working fine. I use backup software and retored my HD to the same condition that it was in before the change. I started iTunes and retrieved my Podcasts and even loaded a CD on it. I was in the process of backing up the HD and I wanted to load the podcasts and CD onto my iPod. It would not connect to iTunes no matter what I did. I stopped the backup and it still would not connect.
I decided to re-install iTunes, went to the Apple site, downloaded the program and it would not install over the old version. I then deleted the older version using add/remove programs and tried to install. When I click on <<Run>>, I get a flash on the screen of Quicktime and then nothing. I then deleted Quicktime from the HD and the same thing kept happening.
I came here and saw a post about Norton so I disabled that and again the same. Then I saw a post about installing Quicktime first, same result. I can see <<quicktime>> and a progression bar for only an instant each time. I am rebooting between all these tries by the way.
Can anyone PLEASE help me to get my iTunes back. I do not have a disc. Can I buy one at Best Buy?? Everything is running fine but it just will not begin the installation.
If there is a solution on this board already, please point me to it. I need iTunes, I don't think I can function without it?? what could have gone wrong??? Again Please, PLEASE help me out.
Thanks so much in advance. I will keep searching for answers in the meantime.
Mike (PLEASE HELP)

If your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

In need of help, desperately!

I'm using LabView 6 to design some testing software for electronic
components, and I want to have a button to return to the main menu that
overides everything...
At the moment, there are two while loops in the main part of my program, and
the buttons control is within the innermost while loop, attached both loops
ending conditions.
However, unless i'm running my inner while loop, the exit button isn't
recognised, (which does make sense), and short of using a local variable, I
can't end the outer loop, without being in the inner loop...
(Does any of this make sense??)
But I don't want to use a local variable, since this would mean I can't use
latching with the mechanical action,
and the next time the program is booted, the
button is still on, causing it
to stop immediately.
Can anyone please help me?
Slade Squire
Programmer
Rectifier Technologies Pacific

Another solution is to read the local where it is needed, and latch the
button back to the FALSE state on exiting the loops by writing to a local.
Greg McKaskle
Slade Squire wrote:
>
> Thanks a lot for that, I'm new with LabView, and simply had no idea!
> I knew that I had to initialize the value to zero, but I didn't know I could
> do it like that
> -Slade
>
> "Roberto Bozzolo" wrote in message
> news:[email protected]..
> > To avoid the problem of controls not being in the default state when a
> > vi starts I am used to put an invoke node at the very beginning,
> > selecting 'VI' as the vi server class of it and choosing 'Reinitialize
> > all to default' as the method invoked. If this is not
suitable for
> > your program you can simply create an invoke node for the boolean and
> > select 'Reinit to dflt' as the method (or create a local variable and
> > wire a False constant to it).
> >
> > This could solve your problem permitting you to use a local variable
> > for the boolean Quit button. If you still don't want to use locals,
> > you could use some of the syncronization vis that lv offers like
> > notifications or ocurrences, found in the Advanced >> Syncronization
> > palette.
> >
> > Roberto

Help desperately really needed please

Im using front page and im trying to put a macromedia flash player into my webpage so when people click on it it will give them the allow or deny box for their webcam how can i do this? html code i cant seem to find only for movies nothing to enable webcam
anyone able to help me PLEASE

Welcome to Apple Discussions!
So the songs are not on your computer?
Either way, to start off, make sure everything is up to date...
iTunes
iPod Updater
Updating iPod's Software
btabz

Need Help Desperately!! Trash won't empty!

Hi
I've had this problem for over a month now and I've just sat here for about an hour trying to fix it.
I've got a .html file in the trash and I just can't get rid of it. It's called: Tiếng Việt.html (which in itself looks suspicious to me).
Anyway, when you try to find info on the file, it just says "fetching" and never actually tells you anything. I've also tried opening it in Safari for info and Dreamweaver but get error messages.
I've tried emptying the trash normally and secure empty trash, but nothing.
Then, as a last resort I went to Terminal. Now normally I don't like to use terminal because I once deleted all the files off my desktop by using it!! Lucky I didn't make a bigger mistake though.
I know I typed the command properly this time though, because I got a message saying "command completed" or something along those lines. But no, it was still there.
So, I did it as follows and this was the result I got:
Last login: Sun Sep 10 10:39:25 on ttyp1
Welcome to Darwin!
You have new mail.
[Macintosh:~] caroline% sudo -s
Password:
[Macintosh:~] root# rm -R /Users/caroline/.Trash/untitled\ folder/
rm: /Users/caroline/.Trash/untitled folder//Legal.localized/Tiếng Việt.html: No such file or directory
rm: /Users/caroline/.Trash/untitled folder//Legal.localized: Directory not empty
rm: /Users/caroline/.Trash/untitled folder/: Directory not empty
[Macintosh:~] root# exit
exit
[Macintosh:~] caroline%
What's confusing me is that it says "no such file or directory" and then "Directory not empty".
I've tried changing it's permission with 3rd party program's and am often given another error message!
I'm worried it's spyware (if it actually exists for a mac!) or something equally sinister. Is it worth doing a virus check?
I've even resored disk permissions...anything else I should try?

Hi
I'm worried it's spywareNo, this is a known problem with certain special characters in filenames. I won't go into tedious detail, since it seems Apple may have fixed it.
Someone else with this problem manage to cure it by running Repair Disk from the Install disk and then using Secure Empty Trash. I don't know that the "Secure" made any difference, it is the disk repair that counts. If it doesn't work after trying Disk Utility, run fsck instead:
Mac OS X: About Using Disk Utility and fsck for File System Maintenance
Let us know if this helps!

RoboHelp 7 Help Desperately Needs Help

I can't believe how drastically Adobe has RUINED RoboHelp's
help system. I'm new to version 7 and have permanently lost view of
my Table of Contents. It's not on the View menu. It's not on the
Pod menu. It's not on a right-click menu, it's no where to be
found. So I hit F1, hoping to connect to a searchable, indexed
help. What do I get? A page with 0 information and 0 links.
Adobe's lack of respect for technical writers is deep and
profound if they do not even understand the basics of user
assistance enough to maintain a good system in a user assistance
development product. We've seen how they behave at tech writer
conferences and how well they listen to feedback. Shame on you,
Adobe. You care not for the end user! You have eyes but do not see,
and ears but do not hear!
By the way, I'm extremely experienced, fast, and would be
willing to create an interactive searchable help system for Adobe,
if they were to pay me. They wouldn't regret it.

- "have permanently lost view of my Table of Contents"
How so? It's permanently in the layout I have set up when I
want the TOC. It's not in the layouts I have for other tasks. The
point is the layout is now what I want which will not be the same
as you. We can both have what we want and we can have different
layouts for different tasks.
- The online help.
That is the Adobe standard so the RoboHelp team probably have
no say in it. They do know our opinion of it and I believe they
will make that known. The offline help is better but not beyond
reproach. That too will be addressed.
- Lack of respect. How they behave.
I have encountered nothing but respect but then again I deal
with them in a constructive way rather than going in guns blazing.
What do you mean by how they behave?
- Feedback
Just because every bit of feedback does not get acted on
immediately, does not mean you are not being listened to. Sometimes
it's priorities, sometimes the views of others will conflict with
yours. I do know though from speaking regularly to the RoboHelp
team that they are working crazy hours to improve RH in line with
the feedback they get.
It may not yet be perfect but it's a big step forward and
there's lots more to come.

Wireless help desperately needed!

I have a laptop with wireless capabilties. I don't have broadband, cable or DSL...I mostly use dial-up but when I go to a cafe/bookstore/wi-fi spot etc. I use wi-fi. I have AOL and on the sign in screen I always was given an optoin on how I wanted to connect to the internet: home (dial up), broadband or TCP/IP connection. When I wanted to use the wi-fi signal I would choose the TCP/IP option. About two weeks ago that option disappeared and now I cannot connect to the internet using a wi-fi signal. I do have a signal because my signal strength is "excellent" ,my signal speed is 54.0 Mpbs and my connection status is established...so what is the problem? I have spoken with various AOL techs and while they have tried their best to help me no one has been able to help me. If it helps I use Windows XP, AOL 9.0 and have my own IP address. I love my wi-fi connection to the internet but I don't know how to get it back! Can someone please help me out? Thanks!

What do you mean when you say that you "have your own IP address"? Did you set your computer to a fixed LAN IP address? If so, what address did you use? When did you set the computer to a fixed LAN IP address? The same time your wi-fi went out? Or perhaps, did your wi-fi go out when you tried to connect at a new wi-fi location?
If you are using a fixed LAN IP address, you will only be able to connect to networks that use that same address range. For example, if you set your computer to 192.168.1.5 with a subnet mask of 255.255.255.0, you can probably connect to a Linksys router, since they usually use 192.168.1.x addresses. But you will not be able to connect to a wi-fi router set to the 10.0.0.x address range, or to the 192.168.2.x address range, or to any other range other than 192.168.1.x
Generally, to connect to wi-fi, you should set your computer to obtain a LAN IP address "automatically" from the "DHCP server". The DHCP server is located in the wi-fi router. With this setup, you can connect to the wireless router, regardless of what address range it uses.
Message Edited by toomanydonuts on 03-05-200701:41 AM
Message Edited by toomanydonuts on 03-05-200701:44 AM

Need help (desperately) '^_^ in writing multiple objects in a single file

For all those Java guru out there please help me,
I want to write a simple application that can serialize objects in a single file. Currently I know how to serialize one object in one file using the ObjectOutputStream's writeObject () method.But the problem is that if i have 10.000 objects to serialize then I will have 10.000 file in my HD. To simplify things I want to write those 10.000 objects in a single file. But I dont know how to do that, any one can help ??

You can write any number of objects of any type into a file when you serialize them. You need to realize that once they're written to the file, they're all placed in there as type Object, so there really isn't any distinction between any of them. You don't have a file that contains only Shapes, or only Images. You write them out as Objects, and then you discover their types later as your deserialize them and read them in. You should read into the "Reflection" capabilities that all objects have. You write an Image to a file, and then a Shape, and then a Color, you can later pack these all into an ArrayList as you read them in, and when you use them discover their type using reflection.
-Jason Thomas.

Design Help Desperately Needed

Hi everyone, Im still here waiting for someone to help me out. Im really desperate, keeping my job depends on getting this right.
My main web page is here www.domesticcontractprofessionals.ca to give you an idea of what Im asking help for.
...In the header file there are several pics. Beside the pics there are scroll over buttons. Id like the first button, that says domestic contract, open when the page loads. Thats all, I just need to to be open until someone scrolls over the other.
Thanks so much for whoever helps me out here. You have no idea how grateful I am.
File can be found here...
http://uploading.com/files/cab78emc/header_v8.fla/
Im a beginner so please walk me through this one if you can. Much appreciated.

The easiest thing I can tell you is to publish your flash
with an html page and then either copy the code from that page and
paste it into your html page or modify the page created by flash.
What’s happening is if you use the “insert flash
object” button in dreamweaver it is using an older embed code
without the parameters that links the AC_RunActiveContent.js that
your flash piece is apparently looking for (I’m guessing
it’s created in CS3).
Hope that helps.

Exs 24 Help desperately

Similar Messages

Maybe you are looking for