EXS 24 Sampler problems.

I have just loaded Logic X onto a 27 inch i7 imac and have 32 gig of ram.
I have always used homemade EXS 24 sample banks successfully on previous set ups Logic 8&9 - and have created new samples to use on the new supposedly more powerful Logic X using convert to sampler function.
Playing one track of these samples come out fine, however when I have two or more sampler tracks playing togther, I seem to get a sort of crunch noise every now and again - as if the CPU or Ram is overloading.
Does anyone have a solution for this please.
Thank you !

hi, again,
sound like you are trying to do everything at once!!!
even the beefiest macs will fold if you push this approach!!
render some of you're VI's to audio, or freeze them.
i have a very old machine but as long as i'm careful and PLAN everything, i have no trouble getting ~ 64- 96 stereo clips @ ~3min ea. running with fx at mixdown.
also, audio clips allow you too inspect the timing, groove of the song and tighten/loosen it to taste in an accurate repeatable fashion.
best, david r.

Similar Messages

EXS Factory Samples And Sampler Instruments Duplicates and Missing Legacy

since updating and comparing to my macbook which i havent updated, it seems there are missing exs factory samples. for example on new logic 9 there are 2 folders exs factory samples which have 01 through 09 folders. the sampler instruments folder has 01 through 12 and folder 12 legacy instruments which on my mac book in sampler instruments have 01 thru 10 then skips to 26 to 41
ann ex factory folder on mac book 01 thru 10 folders and 10 legacy folder contains 01 thru 10 then skips to 27 thru 38. what is going on . why are there missing files in new upgrade i did on main computer? and how do i get all the exs samples and what should they be?

This problem began,i think in Logic 8.....when you install LP8 normally the EXS instruments and Legacy EXS there were always some missing that I was used to using..I found them eventually,they were now part of the the Garageband instrument Library.
I went back and searched all the install DVDs until I found them showing up..some EXS instruments would be missing the actual samples which were now part of the Garageband instrument library,Attitude Bass being one I remember off hand.
I just copied all the Instruments and samples I needed and got rid of the rest which amounts to a lot of space being freed up.
Now I just keep a backup of all my EXS files on external drive so I dont need to install them every upgrade as in Logic 9 (which I checked just in case there were any new files etc!)..which also sorts out the duplicate files headache.
Hope this helps.....

EXS Factory Samples - File Not Found

After moving my EXS Factory samples to an external HD, many of the patches will not load and I get File Not Found Result Code=-43. I've moved them back to the original folder again. What have I done? Are these sounds gone forever?

Hey Thomas. I recently moved the EXS samples to my external harddrive and had similar problems. I posted on this board and got everything worked out. Follow this thread... it might help:
Craig Bryant, "Copying EXS samples and Apple loops to external drive", 04:31pm Oct 19, 2005 CDT
Good luck

Reinstalling EXS Factory Samples.

Hi People, Still having the Specified Volume Doesn't Exist problem with the EXS 24, So I see no other option than to reinstall the Factory Sounds from the Logic Cd. Is it safe to do this or will I loose my personal presets? I don't see any way of loading the EXS 24 sample library on its own. Can anyone advise? Cheers, Someonelikeyou.

Hi Robert, Thanx for replying!!! Do you know how I can install just the sample instruments library? If I choose custom install and highlight the sample instruments library will this install just the highlighted files? If I cannot reinstall just the SI Library will a full Factory Sounds Reinstall wipe out my saved synth patches/sampler instruments etc? I'm really loathed to re-install as I'm sure that there is a way to "Fix" this. As far as I can tell all the Factory Samples are there in their correct location and are accessible via other Plug-Ins.
In answer to your question I am not using an external HD as I don't use that many samples, just the occasional Drum Hit or Field Recording. Project Manager is set to Load Project Manager Database. Anyway any help would be great. Someonelikeyou...

EXS Sampler Problems any one Help Help Help

I Have recently been having loads of problems with my sampler instruments. When I click on some of them they take a while to load I have used the Project Manager in Logic Pro 7.1.1 to scan and that used to work but now no matter what I do in it whether doing an expanded scan or a selected scan or designated selected paths to scan it doesn't seem to make any difference. I have trashed the PM Prefs even the Logic Prefs even trashed logic and put on a fresh install.
I recently in a desperate bid downloaded the demo of EXs Manager from Redmatica to re link my samples with the EXS interments after doing a little song and dance it came back with a great marketing ploy of having scanned so many instrument's it realised that I had more samples than the demo could handle to re-link the whole lot would need the full version which I will need to get at some point just to see whether it can do what it proclaims on the box.
I am getting an error message when trying to load a few samples which reads 'Logical end-of -file reached during read operation Result code=-39'
Can anyone tell me what this means

I haven't had that problem, but my gut is telling me you have a bad drive or corrupt data on that drive. I'd run disk repair, and then if that passes run Disk Warrior or something like it to verify your data.
EXS Manager works great, but it doesn't make samples load faster in my experience. EXS manager is more file management than anything...helps weed out unused samples and tidy up the organization.

EXS white nois Problem

does any one know why all of a sudden the exs sampler is making white noise as opposed to playing back my samples. when I go to the edit page of the sampler I click on the editor and up comes the wave form of my sample file when I play it from within the sampler I don't get a problem but as soon as I use my keyboard to trigger it I get white noise. My sampler never used to do this can anyone in sample Land help

Can't answer your question tim, sorry, but have an additional question sort of on the same track. I have an Akai S5000 which I have been using for years as part of my live setup. In the band I play in we don't use sample CD's and all the stuff playing from the Akai are from original samples, the programs all put together in the Akai.
As such it is easy to get the raw wav's onto the computer but all the magic is done in the Akai program (layering, velocity switching etc, etc) and although EXS will see all this from an Akai CD, is there a way I can make EXS recognise the Akai programs from the Akai HD or the Mac HD (cuz it's easy to put it all accross, just can't make EXS see it unless it thinks it's coming off of an Akai CD). I have hundreds of these so the thought of having to convert them manually once the wavs are in the mac and in EXS is frightning.....
Or am I just being an idiot and missed something really obvious......

EXS - GarageBand Samples Issue

using Logic 7.1.1 and GarageBand 2.02
There is a curious oddity with some of the factory EXS samples. I believe,
originally I installed - updated everything correctly.
Short-story: basically the logic factory "clean electric guitar" - cannot
find the samples... It appears to be looking for:
YTEGUITA1X03.aif
Yet the only sample is in the GarageBand samples folder ( and does not have
the .aif)
YTEGUITA1X03
- further - The GarageBand EXS same instrument loads correctly - so I am
reluctant to simply change the names of all these files...
- in addition all these Main Library files and folders are currently set to
read only... Is that correct?
- I imagine if I want to, I could duplicate the files and add the .aif
extension...
Q: I'm curious if everybody else's clean electric guitar sample has this
issue - or if something was weird with my install?

Missed your following posts...If you have used EXSmanager, and fixed all these issues with all audio files (EXSManager will fix the extensions for these files) and sampler instruments so the references are all resolved according to EXS manager you may need to go to project manager,
Scan the folders where your instruments and samples are
Save projMgr data
select your problem EXS instruments.
Find unresolved file references for selected items
EXSmanager does not modify Project manager data, the destinations of the samples is stored in the exs instruments. This will basically update your PM data for your sampler instruments-referring to the destinations written in by EXSManager. Also, many of the files and folders in your non-user Library folder are owned by the system and may not have been modified because yu do not have the rights to do so. It is best to have 1 directory with all your sample library-so some copying may need to be done. If you don't use GB or the GB instruments in Logic you can use EXSManager to handle all the instruments and moving, etc-but don't modify the files in the Library folder if you use the GB stuff-All the GB stuff is actually Logic synths/samples (engines) with a different GUI, in case you haven't noticed. So you need to decide whether you need GB support and then you should create 1 Large directory for your samples/instruments and EXSManage away-then update/refresh the PM database. If you hit the right settings in EXSManager this will be quite painless.
Cheers

EXS 24 Samples are not found

Hi,
have on different Drives Samples; when I load some instruments EXS 24 gives the error +Samples not found+; in the prefs of EXS I choosed All Drives;
Some ideas?
Cheers
MCY

Hey Thomas. I recently moved the EXS samples to my external harddrive and had similar problems. I posted on this board and got everything worked out. Follow this thread... it might help:
Craig Bryant, "Copying EXS samples and Apple loops to external drive", 04:31pm Oct 19, 2005 CDT
Good luck

Eyedropper Current Layer sampling problem.

Using the "current layer" sampling setting for the eye dropper before I apply any top layer adjustments (adding a top layer with a different blending more or adding an adjustment layer) it works fine. When I use any adjustment layers or any layer that has a blending mode, it affects the way the eyedropper picks color especially when set to current layer.
For instance, If I paint a new blank layer with random colors, I create a black and white adjustment layer on top of that one, I select the first color layer I go to pick a color using the eye dropper with the current layer sampling set, it picks a grey color (which is wrong). BUT!! if I open up the color picker with the color layer selected it picks the correct color. Now, if I delete the black and white adjustment layer, and I am back to only having the color layer, I then go to pick a color with current layer sampling still set, it chooses a grey color again?!?! There are no more layers on top of the original color layer I painted first, and yet it chooses a grey color?!?! I hope this makes sense, any ideas on why this is happening?
I am working on Photoshop CS5 12.1 64bit

I'm having the same problem in CS5.
With current layer selected and a not visible layer of curves (contrast) and trying to pick from the current layer it picks as if the curves layer was visible.
I have attached 2 images: first trying to pick with the curves layer off (you can see that it's picking a black color where brown should be picked. Second one with the curves layer on.
After restarting Photoshop every thing work fine again. So I have assumed that the problem is vinculated with the action done before:
Duplicate image 2 times
Gaussian blur of 6px to the first image
Apply image of the gaussian (RGB channel) inverted in mode "Add", scale 2, displacement 0.
And I create a group as you can see on the screen shots.
http://www.youtube.com/watch?v=wh6eIyrzbt0&t=1m8s
I can reproduce this issue every time I use this technique...

How do you load exs. format files into EXS 24 sampler?

How do you load EXS24 format files into the EXS24 sampler? the only format I can load directly is aiff and wav. can't find any posts addressing this question? please help

You don't load them in, you need to put them in:
*System/users/your user name/library/application support/logic/Sampler instruments*
Restart Logic if it's running, they will then appear in the EXS library.

JSP/EJB sample-problem

Hi,
I'm having difficulties to get the Oracle JSP sample to wrok.
I deployed the JSP App and also the StackDemo app and changed the envrionment variables as requested .
But each time I try to use the DemoStack bean by submitting a 'create stack' I get the message :
"The requested access method is not allowed for that object"
Can anybody help me with this problem?
Michel.

Alex,
I use OAS 4.0.8.1.
I also reloaded the application after deployment.
I used a clinet snippet that is compiled in JDevelope 3.0 and I run it from there .
It finds THE EJB , ic reated and deployed without giving any error messages. The problem rises the moment I try to use one of the functions of the remote interface of the EJB. In these functions I try to use functionality of viewObjects that are provided by a bussines component that I generated using JDeveloper 3.0.
The wrb log file mentions a 'null pointer exeption'.
I think that I do something wrong when initializing the application module that wraps the business component, but I can't see what is wrong.
This is the code I use in my EJB :
String theAM = "EDMpackage.EDMAppModule";
ApplicationModule root = null;
String sessionDefName = ApplicationModule.DEFAULT_DEF_FULL_NAME;
Hashtable env = new Hashtable(2);
env.put(Context.INITIAL_CONTEXT_FACTORY, JboContext.JBO_CONTEXT_FACTORY);
env.put(JboContext.DEPLOY_PLATFORM, JboContext.PLATFORM_LOCAL);
try
Context ic = new InitialContext(env);
ApplicationModuleHome home = (ApplicationModuleHome)ic.lookup(sessionDefName);
root = home.create();
catch(Exception e)
e.printStackTrace();
localAppMod = root.createApplicationModule( "EDMAppMod",theAM );
This works fine , but when I try to get a ViewObject through the localAppMod, I get the error. So I think I am wrong somewhere here.
Michel.

Adobe Acrobat XI SDK Samples problem

I am having problems building and running SDK samples.
When built “out of the box”, the WebLinkDemo fails while getting HFT for AcroColor.
After some googling, I found Adobe Acrobat XI SDK Release Notes:
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/release- notes-acrobatxisdk.PDF
Following their directions:
deleted
/D PI_ACROCOLOR_VERSION=0x00060000
inserted
/D READER_PLUGIN
WebLinkDemo builds OK, but required SnippetRunner fails to compile with multiple errors like:
>c:\code\adobe\acrobat xi sdk\samples\snippetrunner\sources\snippets\shared\acetranspdetextcolorsnip.cpp(60): error C2065: 'PDEContentGetNumElemsSELPROTO' : undeclared identifier
SELPROTO seems to be the commot suffix.
Any suggestions?
Thank you!

Perhaps a little more context. You should understand that the Acrobat SDK is a tool for encouraging people to buy Acrobat - especially the consumers of plug-ins.
Reader plug-ins can be made, subject to technical limitations, but Adobe do not especially like the lost sales of Acrobat this may represent.
In addition to purchasing Acrobat, you will need to buy a Reader integration key, after negotatiation. Approval is not automatic! There are also two scales of fees, one for regular Reader plug-ins and one for security related plug-ins, for which Adobe has a much higher fee and demands much more oversight.
"How much does a Reader Integration key cost?
Reader Integration keys are only available to strategic partners based on a negotiated price. If you are developing a digital rights management (DRM) Adobe Reader plug-in, the standard (non-DRM) RIKLA contract does not apply. Adobe does offer a DRM agreement specifically for developers building such Adobe Reader plug-ins. The current fee structure for the DRM RIKLA includes a $50,000 annual fee and a 5.5% revenue royalty."
http://www.adobe.com/devnet/reader/ikla.html
So, yes, to experiment with plug-ins, whether for Acrobat or eventually for Reader, please listen to what we are telling you and if you want to do this, buy Acrobat.

DI Server sample: problem with login

Hi,
I am studying the DI Server/WSClient sample and I try to connect with de DI Server to my company.
When I try with the DI API, with the same username and passwords, servername etc..., it will succeed.
When I use the DI Server it generates the following error for the sessionID:
Error env:Receiver -1 General Error Login
Because it is the sample delivered with SAP BO, I assume that there are people who examined this example.
Does anyone know what I do wrong??
I found that in administration->licence
I select the tab Properties and select "DI-Server (DIS)"
I see: Total Number = 2 and Available licence numbers = 2.
Which means that the licences are not assigned to any user yet.
When I select the Configuration tab and I select user manager, I see that I can select licences for professional user, SAP Addons and SDK Tools. But I can't assign a licence for the DIS. This could be te reason of the problem. The question is: How can I solve this??
Greetz
Eddy
Message was edited by: Eddy Aper

> Eddy,
>
> Please look at this link to another question and
> answer in this forum that looks similar to the issue
> that you are having.
>
> https://www.sdn.sap.com/sdn/collaboration.sdn?contentt
> ype=url&content=https%3A//forums.sdn.sap.com/thread.js
> pa%3FforumID%3D56%26threadID%3D33989%26messageID%3D342
> 192%23342192
>
> Hope this helps,
>
> Eddy
Eddy,
i am having a similar problem with the DI server, but i can find the post that you have mentioned, it goes to a page moved screen and then back to the main page. Can you please advice how to fix the DI server Genreal Error issue.
Thanks in advance
Mitesh

CRIO 9076 AI Sampling Problem

Hi,
I have a question about the NI 9223 samping rate in our cRIO 9076 system.
Since we are hoping to samping at a rate up to 500K or 1M, we are now using the user controlled I/O sampling.
Right now, we are sampling at 500K (2us). But I got a tick count of 99 ticks (around 2.5us) for the sampling node only.
Should I be expecting so many ticks for the sampling block? Did I do anything wrong?
Thank you so much!
Solved!
Go to Solution.
Attachments:
problem.JPG ‏399 KB

Hi hang-up,
It looks like you are specifying the loop rate for the entire while loop you are in, and not just that one specific part of code. Because you have your loop timer controlled by an front panel object, it is possible that the code compiled, but if you change the loop time to a low value, the code cannot complete in time. I would suggest that you isolate the acquisition you are trying to do in it's own loop so that it can run at full speed.
Additionally, in order to get the full MS/s acquisition, you are going to need to architect your acquisition. I would encourage you to check out the example code in our Example Finder for the NI 9223 User Controlled II Compositionally for the best way to get these maximum acquisition rates. Additionally, depending on how you are going to be exporting this data from the FPGA, your ART controller may not be able to handle a sustained MS/s throughput.
To explicitly answer your question, I suspect that because you are trying to complete a large loop in a short amount of time, the FPGA cannot complete the task in time, so it defaults to a rate that can be better handled. For the control you are looking for, I would encourage you to move your application over to the architecture found in the example project to get the behavior you are looking for.
Ben N.
Applications Engineering
Certified LabVIEW Developer

EXS - Modulating samples with pitch wheel?

I'm making an EXS instrument with my own recorded samples.
I'm trying to play one set of samples between C2 and C3, and another slightly different set of samples between the same keys.
How do I make it so that I can use the pitch wheel on my keyboard to alternate between the two? I can't see the parameters within the EXS sample editor. Or, if I can I certainly can't figure out how to use it!
Any help at all would be much appreciated. Thanks. I'm in a real muddle! Thanks...
Message was edited by: microjac

In the EXS editor place the two sets of samples in two different groups. Select "groups" at the top of the window. Toward the right side you will find "select group by" set the "type" to bend.
In the modulation matrix set the top line to "sample select" the bottom to "pitch bend" and adjust the arrow.

EXS 24 Sampler problems.

Similar Messages

Maybe you are looking for