EXS sample content moved

Hello - I recently moved my personal EXS library content to a new hard drive; I thought EXS would
automatically locate, but no. How do I get EXS to see the new location without actually
rebuilding each instrument please? Many thanks -

The Logic/GarBand install is about 7GB. Logic incudes the base libraries of GB1 and 2. About 1200 Apple loops of mixed styles. Thousands of softsynth presets, about 1600 Sampler Programs, and 1GB Impulse responses for SpaceDesigner.
Piano is included-the biggest is a 450MB Yamaha Grand. Everything else on your list is covered with a full install, the synth Library is the largest by far between Softsynths and sampler instruments. Logic is worth admissioon for the Library and plugins only.

Similar Messages

Moving EXS samples to separate drive

I purchased a firewire drive on which to store my EXS samples. I copied two folders to the new drive: EXS Factory Samples and Sampler Instruments. I then made aliases of these two folders and dropped them into the original folders on my MacBook's hard drive. So now when I attempt to choose a sample in the EXS, I see the alias and can choose a sound from it. Okee dokee. Works fine.
However, I didn't trash the original files from the computer's hard drive after I copied them to the new drive. Actually, I tried but was asked to "Authenticate" this decision. I assume that typing my password will allow me to trash the files, but I thought better of it and decided to ask here first. Is there a problem with trashing these files?
Thanks

hi,
after checking all files have been moved properly, yes you can delete the originals.
the reason you need to sign of on them is they are in the administrator domain, not the user.
DR9.

Logic hangs when loading EXS samples on a session that worked yesterday?

I'm using Logic 8.0.2, I try to open session I was working on yesterday and it now won't open? it seems to not be able to find the EXS samples, as it hangs on the grey bars that show Logic trying to find the relevent samples. it takes forever to look and then eventually slips into 'logic not responding' when I look at the pre-force quit window.
This bug is making my life **** at the moment as I have very tight deadlines on picture work, it seems Logic 9 doesn't fix this as others have reported it so I don't want to use that until it's working without any bugs [ LOL! ]. I have 9 installed on a seperate drive when it's worthy of being used.
Been having this problem for at least 8 months now, I've tried 100's of times running disk utility, and preferential treatment I did try about 3 months ago running a spotlight utility but it didn't make any difference.
I have millions of samples spread on multiple drives, this has worked for me for years and years and only now has started to be a problem so 'moving your exs samples to a default area' is no use to me there must be another solution.
my system:
Logic Pro 8.0.2
OSX 10.5.8 [ 2x3.2 Ghz Quad-Core Intel Xeon ]
8GB memory
Powercore 3.2.0.38 [ for a powercore firewire ]
EuControl 2.0.3.63120 [ for a MC Mix ]
Motu PCI audio driver 1.31 [ for 24i/o, 2408, HD192 ]
hope someone can help.
I know there're other threads about this [ and it doesn't seem to be being fixed ], apple needs to realise the urgency of this problem.

I have 5 drives totalling about 2 TB of stuff which are my working non-application drives, when rebuilding spotlight index in Onyx the rebuilding takes about 5 seconds so I'm not sure that's actually doing anything at all?
this doesn't happen on every session I can normally re-open something but if it refuses to open I have to run disk utility and preferential treatment, restart and try again. this doesn't always work straight away, it can take like 3 x repeats of this / restarts until the session opens again which obviously is hugely disruptive with deadlines.
I heard that opening a session from 'within' Logic works better and I've been doing this but although it seems a little more reliable I'm still at the same point now where on average 1 in 4 sessions won't open and I have to go through the boring routine of disk utility, etc.

Migrating EXS Samples. Logic 6.4 - 8

Hello.
I'm transferring my work from and old g4 powerbook to a new intel Macbook Pro.
I have a lot of unfinished projects on the Powerbook. What is the procedure for transferring my EXS library across?
If I copy the Sampler Instruments folder over, and the samples themselves, will Logic 8 find them? In fact I have no idea where Logic 8 stores samples for the EXS?
Just wondering if there is anything I need to know/watch out for...
thanks

Turns out I spoke too soon.
The EXS sampler cannot load the samples I have moved over. It says they are 'not found'. For example I have a drum breaks exs instrument that contains maybe 80 drum loops. When the sampler opens it says it can't find the files, but the name of them seems to have been changed. Random letters and numbers have been added. For example there is a drum break entitled
AfricanMusic_Machine_-Tropical.wav
But Logic says it can't find AfricanMusicMachineAEE36.wav
When I check the sample's name outside of logic it looks ok again.
Some of the samples load. But very few. If I go to the instrument editor the samples' names are present but they have an explanation mark next to them.
If I click on the exclamation mark and choose 'Open Audio File', I choose the correct file from my sample library but Logic says 'File name too long'.
Any help here would be much appreciated. Is there something I'm missing?
My move from a pb 1.5 to a MBP 2.4 has been totally plagued with problems (not just in Logic) and I'm beginning to wish I'd stayed with a G4 setup. The Trilogy and Atmosphere wrappers are pathetic (I am using them extensively in many an unfinished project)and I can't get Stylus to transfer over in my tracks either. The tracks are bare skeleton versions of what they were, nothing seems to be loading right.
It's all very frustrating.
Message was edited by: domchristian

Missing EXS samples despite full install

I appear to be missing a few EXS samples for instrument channel strip settings such as all the Bosendorfer variations (Club, Hall, Room and Studio) and some of the Pop Strings amongst others. Most of the others are there but if I happen to click on a setting with missing samples Logic freezes for 20 or 30 seconds before warning me of the missing samples.
I have tried doing a complete reinstallation a few times but the samples are still not being installed. OSX won't let me install directly from the samples installer package within the Logic installer. Any idea why these are not being installed? I am selecting every single option in the Logic installer so it's not that.
Thanks
David

dmacintyre wrote:
They are in teh same channel strip folder as the Steinway and Yamaha settings. It's definitely Logic which is installing them as they reappear after deletion and reinstallation of the Logic content.
It could also be that you did not actually delete them before reinstall... ?
It couldn't be Garageband content could it? I am selecting the option to install Garageband content too but I wonder if it is part of the Garageband content which doesn't appear in the Logic installation files.
Garageband doesn't use channel strips. If they were just EXS instruments, it could be.
Also, after you reinstall, OS X needs some time to index all files. If you open *Activity Monitor*, order the processes by CPU use, and look if a background app called mdworker is active. Let it finish (= 0% activity) before you open Logic.
regards, Erik.

EXS' Sampler Instrument Count Limitation

Hello everyone,
Does anyone happen to know of a workaround/ solution to EXS' sampler instrument count limitation? I find myself constantly shuffling instruments and libraries in and out of the Sampler Instruments folder, a process which, given my 1TB library, is tedious and extremely time consuming.
Any "magic fixes" or insights would be highly appreciated..
Thanks!

Some clarifications:
I have been running EXS Manager, Pro Ed from the get-go.
Once again, my complaint is NOT regarding slow load times (which, believe me, is grounds for a whole separate post); rather the inability to access instruments altogether. In other words: past a certain, specific instrument down the list, others would simply no longer load. They are visible in the EXS menu, but are flat out "ignored" by the sampler.
Additionally, I have tried re arranging them using sub-folders, but to no avail: The Sampler Instruments folder seems to only be able to handle so many instruments.
Anyone else..?

Re-Linking EXS Sampler Instruments & Samples

1 - Curious what you think of this concept:
I have an external drive that I'd like to be able to move to several computers and use as my samples drive. To keep things consistent, I thought it best to keep BOTH EXS Sampler Instruments & Samples on this drive. Then I can just create aliases of the EXS Sampler Instruments and drop them in the main logic support folder. That way I can easily just move the drive to either computer for the greatest flexibility.
Is this ok to do? Is there a better way?
2 - I'd like to re-link many EXS Sampler Instruments to their samples. I used to use the ExsManager Pro.app but that stopped working a while back. Is there another way to have logic do all the re-linking instead?

revDAVE wrote:
I have an external drive that I'd like to be able to move to several computers and use as my samples drive. To keep things consistent, I thought it best to keep BOTH EXS Sampler Instruments & Samples on this drive. Then I can just create aliases of the EXS Sampler Instruments and drop them in the main logic support folder. That way I can easily just move the drive to either computer for the greatest flexibility.
Yes, you can do this.
2 - I'd like to re-link many EXS Sampler Instruments to their samples. I used to use the ExsManager Pro.app but that stopped working a while back. Is there another way to have logic do all the re-linking instead?
I highly suggest that you contact Redmatica and get an update to get it working again.

Exs sampler need looped sample to play forever

I have made an exs instrument of 2 separate 1 measure arpeggiated keyboard lines that I have set to loop in EXS sampler on MS2.
I have the EXS set to Mono, and to Unison so that one looped sample will cancel out the other one, I have now assigned 2 drum triggers on my midi drum kit
to each be the note that each of the 2 samples are assigned to. I have the release,sustain,decay cranked all the way on the EXS sampler, however, my samples still slowly die out. Is there a way for me to make them play forever until I play the other sample or hit panic button?
as long as I hold the note it will play forever, however I want to be able to hit a trigger that's assigned to that note, and have it simply loop forever

ù
Is loop in EXS24 editor flagged? I think here around is your solution
• Loop On checkbox: Activate to enable looping and to allow access to the other Loop parameters.
• Loop Start, Loop End fields: Define discrete loop start and end points, allowing you to loop a portion of the audio file.
• Control-clickeitherfieldtoopenashortcutmenuthatallowsaccesstotheLogicPro Sample Editor (or an external editor). This enables you to set the loop start and end points graphically: Loop Start is represented by the LS marker and Loop End by the LE marker. See Editing Samples in the EXS24 mkII Sample Editor.

Get back Shared Workspace Pages and Sample content folder

Hi,
We deleted Shared Workspace pages and Sample content folder in Workspace, due to client's insistence. Now they want it back, as they liked the earlier view better.
Is there a way to get these folders back? Any help will be appreciated.

Did you delete them delete them or simply remove them from the user preferences
To figure that out go to Explore and then select View from your drop down and select "Show hidden"
You should see a folder called "Shared Workspace Pages". If you see it and Inside you have Homepage then you haven't truely nuked it and add it back through preferences.
If you totally nuked it. Then someone else might have the trick for adding it back but if you have a server I would nose around in (for 11.1.1.3 and different depending on which version you are using) to see if you can see the files in question.
/opt/hyperion/deployments/WebLogic9/servers/Workspace/webapps/workspace_webservices/workspace/conf/

Plz help:[unable to deploy sample content]

please help me ,i want to deploy sample content for portal but following error arise
C:\Program Files\Sun\JavaES5\share\ant\bin>ant -buildfile "C:\Program Files\Sun\
JavaES5\portal\samples\portals\build.xml"
Buildfile: C:\Program Files\Sun\JavaES5\portal\samples\portals\build.xml
community:
getConfigLocation:
[echo]
[echo] Please enter the directory where the following files will be fou
nd:
[echo]
[echo] input.properties
[echo] password.properties
[echo] comms.properties (optional: required only when configuring com
munications channels)
[echo]
[echo] For example on solaris: /var/opt/SUNWportal/tmp
[echo]
[echo]
[input] Please enter the samples configuration location:
C:\Program Files\Sun\JavaES5\temp
setInstallationProperties:
[echo] Setting installation properties
setOS:
setSparcProperties:
setLinuxProperties:
setHpuxProperties:
setUNIXProperties:
setWindowsProperties:
[echo] Setting properties specific to Windows platform
checkForUpgrade:
checkForNoUpgrade:
[echo] am.request.portal.id: portal1
setUpgradeProperties:
setProperties:
setLocalUNIXProperties:
setLocalWindowsProperties:
setLocalProperties:
init:
BUILD FAILED
C:\Program Files\Sun\JavaES5\portal\samples\portals\build.xml:16: The following
error occurred while executing this line:
C:\Program Files\Sun\JavaES5\portal\samples\portals\community\build.xml:48: java
.io.FileNotFoundException: C:\Program Files\Sun\JavaES5\portal\samples\portals\c
ommunity\${ps.data.location}\tmp\password869091403 (The system cannot find the p
ath specified)

Hi Shailendra,
Please make sure the "ps.config.location" setting in your C:\Program Files\Sun\JavaES5\temp\input.properties file is correct. On Solaris, this setting defaults to /etc/opt/SUNWportal and on Windows it will need to be changed to the appropriate directory.
The error you are seeing is most likely caused by the "ps.config.location" being inaccurate and the sample config is not finding the PSConfig.properties file.
Hope that helps. thanks ,dean.

PeopleSoft EPM 8.9 Sample Content for XIr2

You can download the BusinessObjects 6.5 content from edelivery.oracle.com. However, if you would like to use XI r2 with EPM8.9 we've taken the time to migrate this content to XIr2. Since XIr2 has an archive file technology, it is very easy to quickly import this content using the Import Wizard. Also, a Security Bridge is available for XIr2 as part of our Integration Kit for PeopleSoft.Download the sample content for EPM 8.9 in XIr2 format here:
<a href> http://diamond.businessobjects.com/files/PSFT8.9_MP3_Content_for_XIr2.zip <a>

Chris,
I suggest you use an existing install of Peoplesoft Financials. The sample dataset is too large and you would spend a lot of time just setting up the demo environment. Unfortunately, you will have to setup the system for the sample dataset. I guess you will have to do it the hard way if you have no other setup
-Red

Sample content instal in LP9

I have all my logic/garage band samples on a seperate HD. When Logic 9 in installed will I need to move all the content again to the seperate HD? Anyone know of a fast way to move all the sample content?
Does LP9 work well with Native Instruments? Will I need to reinstall all my 3rd party plugins and softsynths?

The Logic/GarBand install is about 7GB. Logic incudes the base libraries of GB1 and 2. About 1200 Apple loops of mixed styles. Thousands of softsynth presets, about 1600 Sampler Programs, and 1GB Impulse responses for SpaceDesigner.
Piano is included-the biggest is a 450MB Yamaha Grand. Everything else on your list is covered with a full install, the synth Library is the largest by far between Softsynths and sampler instruments. Logic is worth admissioon for the Library and plugins only.

Sample content/appleloops in Logic7, what's included?

I'm considering getting a Powerbook and Logic7. It'd be a move from PC and Cakewalk Sonar.
I've figured out most I need to know, but I haven't found any list of included/bundled sample content. It says somewhere that there are atleast lot's of appleloops, but what kind of loops?
I'm also interested in knowing about softsynth/effects presets (there were very few in Logic Express trial) and if there are any samplesets included for EXS24, like basic piano, guitar (acoustic/electric) and drumsets (electric, analog, 909, 808..)?
Thanks a lot for info!

The Logic/GarBand install is about 7GB. Logic incudes the base libraries of GB1 and 2. About 1200 Apple loops of mixed styles. Thousands of softsynth presets, about 1600 Sampler Programs, and 1GB Impulse responses for SpaceDesigner.
Piano is included-the biggest is a 450MB Yamaha Grand. Everything else on your list is covered with a full install, the synth Library is the largest by far between Softsynths and sampler instruments. Logic is worth admissioon for the Library and plugins only.

Sample Content Management Plan Doc

Hi,
Does anyone has sample Content Management Plan docs.
I do remember that, in BO online e learning courses, they provide these sample docs as part of their exercises.
I lost those docs. Now I don't have access to those courses too.
If anyone has the same docs or something similar docs, please provide.
As I Installed a fresh installation, I would need to create CMP doc.
Kindly help me.
Thank you.

Hi Robert,
Thanks for the input.
I've configured the template using the document template tool (CRM_OI_TEMPLDSG) i.e. available on web for business role SALESPRO -> Sales Operations-> Document Templates with template profile as Object type. This template profile, I assigned to one of transaction type of acitvites.
But the button "With template" under attachment tab with this activity type is not getting enabled.
I'll be interested to know if any missing steps or setting required for template configuration.
Regards,
Arjun

EXS Sampler getting samples in?

Ive been chopping live drum audio files saving to desk top then into ESX.
Is there a better way?

revDAVE wrote:
I have an external drive that I'd like to be able to move to several computers and use as my samples drive. To keep things consistent, I thought it best to keep BOTH EXS Sampler Instruments & Samples on this drive. Then I can just create aliases of the EXS Sampler Instruments and drop them in the main logic support folder. That way I can easily just move the drive to either computer for the greatest flexibility.
Yes, you can do this.
2 - I'd like to re-link many EXS Sampler Instruments to their samples. I used to use the ExsManager Pro.app but that stopped working a while back. Is there another way to have logic do all the re-linking instead?
I highly suggest that you contact Redmatica and get an update to get it working again.

EXS sample content moved

Similar Messages

Maybe you are looking for