Exs sampler need looped sample to play forever

I have made an exs instrument of 2 separate 1 measure arpeggiated keyboard lines that I have set to loop in EXS sampler on MS2.
I have the EXS set to Mono, and to Unison so that one looped sample will cancel out the other one, I have now assigned 2 drum triggers on my midi drum kit
to each be the note that each of the 2 samples are assigned to. I have the release,sustain,decay cranked all the way on the EXS sampler, however, my samples still slowly die out. Is there a way for me to make them play forever until I play the other sample or hit panic button?
as long as I hold the note it will play forever, however I want to be able to hit a trigger that's assigned to that note, and have it simply loop forever

ù
Is loop in EXS24 editor flagged? I think here around is your solution
• Loop On checkbox: Activate to enable looping and to allow access to the other Loop parameters.
• Loop Start, Loop End fields: Define discrete loop start and end points, allowing you to loop a portion of the audio file.
• Control-clickeitherfieldtoopenashortcutmenuthatallowsaccesstotheLogicPro Sample Editor (or an external editor). This enables you to set the loop start and end points graphically: Loop Start is represented by the LS marker and Loop End by the LE marker. See Editing Samples in the EXS24 mkII Sample Editor.

Similar Messages

Hello.... I already loaded logic 9 on my laptop hard drive... I would to load all the samples and loops on an external drive... Do I need to reinstall from DVD's or can I drag and drop?

Hello.... I already loaded logic 9 on my laptop hard drive... I would to load all the samples and loops on an external drive... Do I need to reinstall from DVD's or can I drag and drop?

Thank you.... Would you know where they would be on my hard dive? Are they all together?

Opening plug in settings, sample files, loops, effects, etc

What application do I need to use to open the plug in settings, sample files, loops, etc.? Some open with quicktime, however, most all of them are pst files. I am new to this and have no idea what that is. The files are there, they just won't open, even if I change them to open with quicktime. Any help would be appreciated.
Garage band v1.1.0 (26) Mac OS X (10.4.8)

I've tried opening them from within garageband, no success. I went through finder just to see what type of file they were compared to the ones that would open. the ones that will open open with quicktime and are .aif files. The other ones won't open even if I select quicktime as the application to open them with. I know I sound stupid, but I'm kinda new to the digital recording. Am I missing an application or driver or something? Thanks for responding.
Mac OS X (10.4.8)

Is there any way to have a COMPLETE list of all samples and loops ( Logic 8

I'm sure it's been posted previously, but anyway, I'm looking to buy new Apple Loops libraries and I have faced the fact , that many of the sounds and loops produced by third parties manufacturers have been already included in Logic installation discs.
I have a list of Apple Loops DVD's that have been included with Logic somewhere, the problem is, Apple didn't post ( I believe) the credits of all 3rd party manufacturers that have produced these libraries that are included with Logic or Garage band. Is there any way to have a COMPLETE list of all samples and loops that are included with Apple DAW's so I wouldn't duplicate anything ? I'm pretty much positive that Apple had other companies to sound design and sample all libraries for them, so is there also a way to have a list of those manufacturers? Again, the objection is to start upgrading the sound library without any possible duplication?
Thanks in advance!

Chris, I certainly don't mind additional questions and postings.
I believe there are many issues with Apple Loops and Logic that need to be resolved and people need to be aware of that. Unfortunately, in opposite to the old "german" version of Logic , there's no lifetime tech support, you can't even call and ask the question after 60 days , which isn't right for a professional software of this level, especially considering the fact that many things still remain vague in Logic even for developers and tech support people!( believe me, I've called and asked!)
Issues like that need to be resolved over the phone with the company, period!
One thing I also learned over the years as a Mac OSX user, if something doesn't work, don't mess with it. Delete your drive and re-install everything. This is very frustrating , I know, but unfortunately this is the only way to deal with OSX issues, if you got a problem with your system, don't try to fix it. It's never gonna be the same again. I know , it's off the topic a little bit, but if your content is missing from the system files, before installing your new Logic, back up your important files, wipe up your drive and clean install Mac OSX , run updates and then install the Logic. Most likely , everything will be in it's place, at least 90% or more. I gave up trying to make two system in my house to be compatible 100% , but it's OK if they're 90% or more identical. I spent enormous amount of time trying to find out what's missing and where, I visited most of the forums and there's no clean answer.
Message was edited by: Moderator

EXS 24, importing AKAI samples...

I want to import all of my AKAI CD-ROMs into EXS 24, and I want all of the sampler instruments and samples to live on my external FW drive.
Having a heck of a time trying to understand the file management heirarchy, I started from scratch, and tried to keep things simple.
1. Erased all previous instances of the CD's I had been importing
2. Imported a single program/samples from one particular CD. After it was loaded, I moved the audio files (using the EXS24 move function) to a folder on my FW drive and saved the program in another folder on the same drive. Then I deleted the program from the internal HD where it was originally saved.
3. Repeated this with a second single program from the CD
When I was done, there were two instances of the first program saved on my FW drive (one had the .exs extension, one did not). This was not the case for the second program. (Huh???!!!??)
When I clicked on the EXS24 program selection window, the menu indicated two "External" volumes (but I've only got one external FW drive). One folder contained the first program, the other the second program, and on top of it all, there was an additional folder containing the duplicate of the first program. A bit mind-numbing, eh?
If anyone can explain how I can (easily) import all of my stuff to my FW drive without creating duplications, or, point me to an on-line tutorial, I'd reeeeeeaaaaallly appreciate it.

Thanks to all who responded.
I finally figured out where Logic was putting samples and instruments. After some trial and error, and re-re-re-re-re-re-re-re-reading the manual, I figured out how to move all of this data to my external FW drive and still have Logic see it.
I took your (collective) advice and tried importing whole disks at once. Problem was that it generated so much data that I was making mistakes as I organized my various programs into folders and sub-folders (doing orchestral stuff, so strings, winds, brass, perc all needed to be separated). So I did it "the hard way", one volume (or program) at a time, and now everyone's organized and happy.
Thanks again for the replies. Cheers!

Need a sample program for hierarchial oops ALV report

Hello experts,
                 I Need a sample program for hierarchial oops ALV report.

Hi,
   Check the following sample code...
T A B L E S
tables : ekko.
data definition
types : begin of ty_ekko,
          ebeln type ekko-ebeln,
          lifnr type ekko-lifnr,
          bsart type ekko-bsart,
          aedat type ekko-aedat,
          ernam type ekko-ernam,
        end of ty_ekko.
types : begin of ty_eket,
           ebeln type ekpo-ebeln,
           ebelp type ekpo-ebelp,
           werks type ekpo-werks,
           matnr type ekpo-matnr,
           menge type eket-menge,
           wamng type eket-wamng,
           netpr type ekpo-netpr,
        end of ty_eket.
data : it_ekko type table of ty_ekko,
       it_eket type table of ty_eket.
data: ob_hieralv type ref to cl_salv_hierseq_table.
data: it_binding type salv_t_hierseq_binding,
      is_binding type salv_s_hierseq_binding.
S E L C T O P T I O N S
select-options : s_ebeln for ekko-ebeln.
S T A R T O F S E L E C T I O N
start-of-selection.
select ebeln
       lifnr
       bsart
       aedat
       ernam from ekko
into corresponding fields of table it_ekko
where ebeln in s_ebeln.
if sy-subrc eq 0.
select aebeln aebelp
       awerks amatnr
       bmenge bwamng
       a~netpr from ekpo as a join eket as b
                 on amandt = bmandt
                 and aebeln = bebeln
                 and aebelp = bebelp
               into corresponding fields of table it_eket
              where a~ebeln in s_ebeln.
endif.
is_binding-master = 'EBELN'.
is_binding-slave = 'EBELN'.
append is_binding to it_binding.
*TRY.
call method cl_salv_hierseq_table=>factory
exporting
t_binding_level1_level2 = it_binding
importing
r_hierseq = ob_hieralv
changing
t_table_level1 = it_ekko
t_table_level2 = it_eket .
*CATCH cx_salv_data_error .
*CATCH cx_salv_not_found .
*ENDTRY.
call method ob_hieralv->display( ).
Cheers,
Ram

NEED A SAMPLE BADI PROGRAM

Hi everybody,
I am learning BADi'S, so i need a sample program so that i can do it and learn how to design and implement a BADI.
I am thankful if any body help me regarding this.
waiting for reply.
thanks and regards,
mahaboob subhani shaik.

hi,
check any fo the below links. this will def help u.
http://www.allsaplinks.com/badi.html
And also download this file....
http://www.savefile.com/files.php?fid=8913854
There are other tutorials on this site...
http://sapbrain.com/Tutorials/tuto_download.html
BADI'S
BADI Link
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
Regards,
anver.
if hlped pls reward points

I need some sample customer data

Hi all,
I need some sample customer data along with order details (for any product) for a mining application. Can anyone help me in this regard....
thanks,
swathi.

Hi all,
I need some sample customer data along with order details (for any product) for a mining application. Can anyone help me in this regard....
thanks,
swathi.

Need some sample documents for DME development

Hi,
I need some sample documents for DME development. I expect any information covering developing DME formats and steps for downloading a DME file (this I need for checking my formats).
please, send any relevant info you have to mail id mindaugas.kazlauskas at gmail.com
Many thanks and reward points ahead!
Regards,
Mindaugas

Hi,
the main thing is that I need format with payment information structured in single column, like this:
//separator//
value1
value2
value3
//separator//
value1
value2
value3
//separator//
maybe there is any SAP format structured like this?
Regards,
Mindaugas

Need some sample alvs using merge

I need some sample alvs using merge

Hi!
data w_fieldcat type slis_fieldcat_alv.
type-pools : slis.
tables : sflight.
data : i_fieldcat type slis_T_fieldcat_alv.
data v_repid like sy-repid.
data : begin of i_sflight occurs 0,
carrid like sflight-carrid,
connid like sflight-connid,
fldate like sflight-fldate,
end of i_sflight.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = v_repid
i_internal_tabname = 'I_SFLIGHT'
i_inclname = v_repid
changing
ct_fieldcat = I_fieldcatalog_TYPE.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/22/a3f5fed2fe11d2b467006094192fe3/frameset.htm
Regards
Tamá

Need a Sample GRC 10.1 technical architecture Diagram

Hi All,
I need a sample GRC 10.1 technical architecture Diagram for a quick presentation. Let me know if you could help or provide a document where i could refer and use it. Time is very short to prepare a architecture now.
Thanks for your replies in advance.
Regards
Mani.

Hi Mani,
you can search for Pre-installation guide for GRC 10. which has below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0024bb74-4d4e-2e10-82ad-ff2ccb79ad63?overridelayout=t…
Regards
plaban

Tour de Flex Samples needed Adobe AIR plugin to PC to run ?

Where I may find free/open-source sample autonomus Adobe AIR Apps?
How I test if Adobe AIR success installed?
Tour de Flex Samples needed Adobe AIR plugin to PC to run ?

Hello,
Solution is very simple, just uncheck the "Group items by category" to display last version of Tour de Flex feauture which is default checked
and if you uncheck the "Show only the latest versions.." you will see all other versions.
Regards,
Goze

I need a Sample Code about flash++.h and swc.

hi,help me !
i need a Sample Code about flash++.h and swc.
my Sample Code bitmapdata.cpp:
#include <AS3/AS3.h>
#include <Flash++.h>
using namespace AS3::ui;
void gettpoint() __attribute__((used,
annotate(“as3sig:public function gettpoint(x:Number,y:Number):uint”),
annotate(“as3package:MyLibrary”)));
void gettpoint()
double xx;
double yy;
inline_as3( “%0 = x;%1 = y\n” : “=r”(xx) : “r”(yy) );
flash::geom::Point p=flash::geom::Point::_new();
AS3_Return(xx);
int main()
AS3_GoAsync();
return 0;
the compile command is “$(FLASCC)/usr/bin/g++” $(BASE_CFLAGS) -O4 bitmapdata.cpp -emit-swc=MyLibrary -o bitmapdata.swc -lFlash++ -lAS3++
It took me ten minutes to compile，but it can’t work.why?

Compiling a SWC using Flash++ will result in poor compiler performance if you are using the Flex SDK to compile that SWC into a SWF.
To get better performance try using the new version of mxmlc that is shipped in the Adobe Gaming SDK. (Note that this new version of mxmlc doesn't support Flex)
You will need to install the Gaming SDK and then extract the archive in the "AIR SDK" folder. Once that archive is extracted you'll notice the new mxmlc compiler in the bin folder.
Unfortunately compiling a SWF seems to be a little tricky. You'll notice in the sample Makefile below project that it changes directory into the bin folder before calling ./mxmlc. Ideally you wouldn't need to do this (like how it worked with the Flex mxmlc). I'll investigate why that is the case.
Makefile:
# Path to your FlasCC SDK folder
$?FLASCC=/Users/stshongr/builds/alchemy/1.0.0/sdk
$?GAMINGSDK="/Applications/Adobe Gaming SDK 1.0/AIR SDK/air3-5_p4_sdk_asc2_mac_112112/bin"
# The folder the source files are in
$?SRC_FOLDER=$(PWD)
all:
          "$(FLASCC)/usr/bin/g++" MyLibrary.c -emit-swc=MyLibrary -o MyLibrary.swc -lFlash++ -lAS3++
          cd $(GAMINGSDK) && ./mxmlc -library-path=$(SRC_FOLDER)/MyLibrary.swc $(SRC_FOLDER)/demo.as -o $(SRC_FOLDER)/demo.swf
clean:
          rm -f *.swf *.swc *.bc *.exe
MyLibrary.c:
#include <AS3/AS3.h>
#include <Flash++.h>
using namespace AS3::ui;
void gettpoint() __attribute__((used,
                                annotate("as3sig:public function gettpoint(x:Number,y:Number):uint"),
                                annotate("as3package:MyLibrary")));
void gettpoint()
    double xx;
    double yy;
    inline_as3( "%0 = x;%1 = y\n" : "=r"(xx) : "r"(yy) );
    flash::geom::Point p=flash::geom::Point::_new();
    AS3_Return(xx);
int main()
    AS3_GoAsync();
    return 0;
demo.as:
package {
    import flash.display.Sprite;
    import flash.text.TextField;
          import flash.events.Event;
    import MyLibrary.CModule;
    public class demo extends Sprite {
                    private var tf:TextField;
        public function demo() {
            addEventListener(Event.ADDED_TO_STAGE, initCode);
        private function initCode(e:Event):void {
            tf = new TextField();
            addChild(tf);
            // start the FlasCC library
            MyLibrary.CModule.startAsync(this);
            // call the function
                              tf.appendText("OUTPUT:" + MyLibrary.gettpoint(2,2));

I need a sample to test

Dear producer,
i need a sample of the product i will like to place order for me to be able to test it to know if it can suite the purpose of my application.
i will be grateful if my request is granted.i look forward to doing good businees with your company.

Hello,
please contact your local National Instruments branch or distributor for this request.
Best regards,
Jochen Klier
National Instruments Germany

I need a sample vi that can plot a transfer function given zeroes and poles (It should allow the user to input zeroes and poles). It should be done in the S domain.The user should be allowed to put poles and zeroes, with frequency

I need a sample vi that can plot a transfer function given zeroes and poles (It should allow the user to input zeroes and poles). The user should be allowed to put poles and zeroes, with frequency. DONE IN S DOMAIN.

I have created a VI (LabVIEW 6.1) that does what you want. Note that the poles and zeros have to be entered correctly that is in Rad/s and typically with negative real part. The VI offers you all options for lin/log frequency axis, magnitude in dB or not, phase in Radians or Degrees etc...
The VI is written with "academic" in mind, so it is not optimized for performances but (hopefully) for clarity. I hope this will work for you.
Attachments:
S-Domain_Transfer_Function_from_Poles-Zeros.vi ‏167 KB

Exs sampler need looped sample to play forever

Similar Messages

Maybe you are looking for