EXS Sampler Problems any one Help Help Help
I Have recently been having loads of problems with my sampler instruments. When I click on some of them they take a while to load I have used the Project Manager in Logic Pro 7.1.1 to scan and that used to work but now no matter what I do in it whether doing an expanded scan or a selected scan or designated selected paths to scan it doesn't seem to make any difference. I have trashed the PM Prefs even the Logic Prefs even trashed logic and put on a fresh install.
I recently in a desperate bid downloaded the demo of EXs Manager from Redmatica to re link my samples with the EXS interments after doing a little song and dance it came back with a great marketing ploy of having scanned so many instrument's it realised that I had more samples than the demo could handle to re-link the whole lot would need the full version which I will need to get at some point just to see whether it can do what it proclaims on the box.
I am getting an error message when trying to load a few samples which reads 'Logical end-of -file reached during read operation Result code=-39'
Can anyone tell me what this means
I haven't had that problem, but my gut is telling me you have a bad drive or corrupt data on that drive. I'd run disk repair, and then if that passes run Disk Warrior or something like it to verify your data.
EXS Manager works great, but it doesn't make samples load faster in my experience. EXS manager is more file management than anything...helps weed out unused samples and tidy up the organization.
Similar Messages
-
Need advise, I have purchased compressor 4.1 to compress my movie file, particularly MKV files. Problem is, that the software freezes when trying to import the 10GB MKV. Any one that can help?
Afraid Compressor won't work with MKV. If you have access to a system running an earlier version than Mavericks, and with Perian installed you can use MPEG Streamclip or Quick Time Pro to convert to a mov.
Russ -
I have a CS3 Creativ Suite. - I have uninstalled it fram XP the corret way. Now i have installed Windows 7 and try to reinstall the creative suite. It accept the first CD an the serial number, but when i get to the second CD it stop. Any one who can help?
If you have Windows 7 Pro you can try to install CS3 in XP mode.
-
my new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???
Try an SMC Reset. (System Management Controller)
Shutdown>unplug from power for ten minutes>press and hold in the power button for ten seconds>startup again.
Also try a PRAM Reset. (Parameter RAM)
Shutdown. At the bootup chime, hold down CMD-Option-P-R together, wait for two more chimes, total three, then let go of all keys to finish booting,
If this doesn't do it, run the Hardware Test in Extended
http://support.apple.com/kb/ht1509 -
Email report problem any one hel me
Dear all,
i have a email report its working fine but when i was not closed the report engine then its showing the attached library error message.
1st time i have run the report then i sent the mail so mail delivered. again i want send email so am not close the report engine so its giving the attached library error.
any one plz help me.
Regs,
shanNot sure about this error. Did you try to run the report by adding this parameter in your form? If no then try like..
ADD_PARAMETER(PARAMETER_LIST_NAME,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES');-Ammad -
Hi Hello,
Before I start my question, hope nobody laugh at me, I am not a computer geek, I just a user of a phone.
I have read so many how to do and how to delete albums in the web/google but not anyone of them make sense to me,I hope someone can help me do this step by step.
I am using an iphone 4/operating system 7.0.4
I would like to delete the unwanted albums in my phone under the photo icon, where do i start?
like... 1/ connect the phone to the computer
2/ click the itune icon
3/ then whats next?
Please help I could not download anyother app, the system( phone ) always tells me that memory is almost full, I am already frustrated, please help.
If I reset the phone will it erase all the phone numbers and remove all my notes?
Thank you.
<Email Edited by Host>Hi mylenebar!
Here is an article that will help you remove the desired photos from your phone:
iTunes: Syncing photos
http://support.apple.com/kb/ht4236
To delete synced photos and videos from your device
In iTunes, click the Device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper-right corner first.)
Click the Photos tab in the resulting window.
Choose "Selected albums" and deselect the albums or collections you want to delete.
Note: To delete all synced photos, deselect "Sync Photos from" and, when asked, click "Remove photos."
Click Apply.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
Is there any one who can help me solve this?
Hi.
I'm taking AP Computer Scinece AB in high school now.
I've been assigned many programs so far. But.. I can't figure them out.
There are two programs I need your help. So..Please!!!!!! Help Me!!!!
Please!! Enjoy helping me!
<Program #1>
It's divided into three small programs and I've figured out one of them, which was the easiest one..You will be able to see the programs if you click on the link below.
(page1)
http://iboard3.superboard.dreamwiz.com/board.cgi?db=90_darkoo&idx=2&page=1
(page2)
http://iboard3.superboard.dreamwiz.com/board.cgi?db=90_darkoo&idx=3&page=1
<Program #2>
http://iboard3.superboard.dreamwiz.com/board.cgi?db=90_darkoo&idx=4&page=1
The way I figured out first part of program #1 was like this :
public class ThreeX1
public static void main ( string[] org )
system.out.println ();
int startValue = 21;
int count = 0;
while (startValue >1)
count ++;
if (startValue % 2 == 0)
startValue = startValue/2;
else
startValue = 3*startValue +1;
system.out.println ( count );
===================================================
From there, for the second and third programs of program #1, I tried to figure it out by using 'for' statement instead of 'while', but I couldn't.
So..Please help me out.. Thank you
or you can e-mail me too. It would be great too.
add. : [email protected]I probably shouldn't be doing your homework but here it is:
public class ThreeX2{
public static void main ( String[] org ){
int startValue = 2;
while(startValue<100){
System.out.print(startValue);
System.out.print("\t");
System.out.println(timesToGetToOne(startValue));
startValue++;
private static int timesToGetToOne(int intForValue){
int count = 0;
while (intForValue!=1){
count ++;
if (intForValue % 2 == 0)
intForValue = intForValue/2;
else
intForValue = 3*intForValue +1;
return count;
public class ThreeX3{
public static void main ( String[] input ){
int maximumTries = 1000000;
int numberOfitterations = 10;
try{
numberOfitterations = new Integer(input[0]).intValue();
}catch(Exception e){
try{
maximumTries = new Integer(input[1]).intValue();
}catch(Exception e){
int startValue = 2;
while(startValue<maximumTries){
if(timesToGetToOne(startValue)==numberOfitterations){
System.out.print("When startvalue is: ");
System.out.print(startValue);
System.out.print(" it will take exatly ");
System.out.print(timesToGetToOne(startValue));
System.out.println(" iterations to get to 1.");
// remove the next line and it will show all values that
// takes numberOfitterations amount of times to get to 1
break;
startValue++;
private static int timesToGetToOne(int intForValue){
int count = 0;
while (intForValue!=1){
count ++;
if (intForValue % 2 == 0)
intForValue = intForValue/2;
else
intForValue = 3*intForValue +1;
return count;
}Problem 3 is diffucult, since the input is one date I assume that the current reading is for this date. I don't
know the date of the previous reading so I cannot calculate if the consumption is between June through
Ocober.
your Main method shoud have 4 inputs date accountNumber currentReading previousReading
Your main function would look like this:
public static void main ( String[] input ){
Calendar date=null;
int accountNumber = 0;
int currentReading = 0;
try{
String[] s = input[0].split("/");
date = Calendar.getInstance();
date.set(Calendar.YEAR,new Integer(s[2]).intValue());
date.set(Calendar.MONTH,new Integer(s[0]).intValue()-1);
date.set(Calendar.DAY_OF_MONTH,new Integer(s[1]).intValue());
}catch(Exception e){
System.out.println("cannot get date, please start this program the following way: ");
System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
try{
accountNumber = new Integer(input[1]).intValue();
}catch(Exception e){
System.out.println("cannot get account number, please start this program the following way: ");
System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
try{
currentReading = new Integer(input[2]).intValue();
}catch(Exception e){
System.out.println("cannot get current reading, please start this program the following way: ");
System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
try{
previousReading = new Integer(input[3]).intValue();
}catch(Exception e){
System.out.println("cannot get previous reading, please start this program the following way: ");
System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
// check the date between june and oct:
// (5>date.get(Calendar.MONTH))&&(9<date.get(Calendar.MONTH)) -
hi this is gopinath
i have a problem for a long time.
i done a fullscreen view using Frame and Window class.
i have one option on my GUI-Fullscreen view
if i click that option i have to get the fullscreen view of my GUI
Fullscreen is getting but it gets displayed back on my original GUI
i have 2 bring to the front.
i used show(),toFront(),setVisible().These are not working.
what to do?
shall i build Fullscreen using JFrame and JDialog?Is this possible?
help me how to do..........
or shall i continue the previous path?
help me plzzzzzzzzz.........................hi this is gopinathHello.
i have a problem for a long time.I have read your posting and I am not sure what the problem is but I will try to help if I can.
i done a fullscreen view using Frame and Window
class.Window is rarely used. It has no borders or menu bar. Frame is more commonly used. It extends Window. Neither have a "fullscreen view" but there is a getToolkit() which can be used to getScreenSize().
i have one option on my GUI-Fullscreen view
if i click that option i have to get the fullscreen
view of my GUI
Fullscreen is getting but it gets displayed back on
my original GUIWell where else could it be displayed.
i have 2 bring to the front.
i used show(),toFront(),setVisible().These are not
working.Window (and consequently Frame) have a toFront() method. You would probably need to either (1.) pass control to the Window that you need at the front and call its toFront method, or (2.) pass control to the Window that you want visible while calling setVisible(false) on the other Window.
what to do?
shall i build Fullscreen using JFrame and JDialog?Is this possible?JFrame is generally preferred to Frame because JFrame is lightweight. This means it is written entirely in Java.
help me how to do..........Search the tutorials for "Swing." JFrame extends Frame so you should still be able to use the methods that you are used to using.
or shall i continue the previous path?Either would work. Jframe is slightly preferred. However you may wish to also look into using JDesktopPane and JInternalFrame. The intention behind the design of these these two is that JInternalFrames live inside a JDesktopPane.
help me plzzzzzzzzz.........................It is difficult to design someone else's programs. Especially without some idea of what the program is supposed to be doing. Ideally it would be good to have a little explanation about
1.) what you are trying to achieve
2.) programs that you have written
3.) exception or problems that your code is having. -
Please! any one can provide help here !
Dear Sir,
I have WD Caviar EIDE 8.4 GB hard disk with these specification:
Model: WDC AC28400R
S/N: WD-WM6281248960
Firmware: 17.01J17
C H S: 16383 16 63
Drive: 0
Baseport: 0X1F0
DCM: CVABKQSH
Build Date: 27-MAY-99
SMART is OFF.
installed on it:
Windows 98, Win 2000 and Linux.
Now i want to install Solaris 8.0 and it gives me the following error:
"error: bad port 0xffff len 0x8
Thr root filesystem is not mounted and the configuration assistant has exited
permaturely. Booting
is unlikely to succeed. Ctl - Alt -Del may be used to reset the machine.
Failover to boot interpreter - type Ctl-d to resume bot" and if i try to resume
it will fail.
Can you tell me what to do? Maybe there is some setings i should change in the
BIOS ?
Note:
My motherboard is :
"PCPartner VIB878DS series" "VIA MVP3" you can chech its spesification at this
site:
http://www.pcpartner.com.hk/prod/vib878ds.htm
thank you very much for your help, and i hope to hear from you as soon as
possible
yours,
Al-Shayeb,
[email protected]You can not have win98 installed at the beginning of the disk, or installed at all, because both win98 and solaris 8 need to be installed at the beginning of the first disk.
your choices are
1. install solaris 7 instead of 8.
2. format the disk, creat 3 partitions, use the first one to install solaris 8, then win2000, and linux, say byebye to win98.
yang -
Ready for OC any one willing to Help
Good Day
Well first of i am happy i am part of the MSI comunity 2 this is My first MSI MOBO and My first Intel processore
always been with ASUS and AMD
I am very happy with my New PC and asking for help to start OC
Here are My Specs
Features: DirectX 11 capable of extremely fast graphics performance , the latest Intel technology PU Very fast HDD performance ,
Description : The configuration does not include operating system!
Accessories: Manual , Driver (CD)
Slot PCI Express x16 : 3
S / PDIF: yes
max. Number of S- ATA devices : 6 x SATA600
Processor: Intel ® Core i7- 4770K processor
Serial: No
Sound on Board : 8-Channel Realtek ALC1150
DVD Writer : DVD Writer S- ATA
Jumperless : Yes
System Monitoring : Yes
Crossfire -ready : Yes
Graphics : Gigabyte GeForce GTX 760 OC WF 3X , 2GB DDR5
Maximum memory : 32GB
Slot PCI Express x1 : 4
Chipset: Intel Z87 Express
Power Management: Yes
PS / 2: 2 keyboard Combo
Fan: Scythe Katana 3
SLI Capable: Yes
Raid: 0,1,5,10
Memory clock : 1600 MHz DDR3, CL10
Main memory (Dual Channel) : 16GB Corsair Vengeance LP kit
DVI: 2x + 1x HDMI + 1x DisplayPort
Parallel: No
USB Ports: 8 x USB 2.0 + 6 x USB 3
SSD : SAMSUNG SSD 840 PRO 128GB
Motherboard: MSI Z87 -G45 GAMING ATX
Case: Cougar Evolution 6GR1B black
Manual: German
Software_Z3 : System Software Utilities
HDD: WD Caviar Green 2TB SATA 6Gb / s
On-Board Network: Gigabit Killer E2205
Firewire : No
Audio ports : Line- in , Mic-in , front -out , rear -out , center -out
PSU : Cougar Power 700 W
Pictures of My PC can be found at this thread
Quote
https://forum-en.msi.com/index.php?topic=176729.new;topicseen#new
many thanksI dont know my way around the Site here
i wanted to wrap my specs in text wrap or any thing similar but it wont let me -
HI THERE IS THERE ANYONE WHO CAN HELP ME?I UPGRADE MY IPHONE 3GS TO IOS5 AND NOW IT WONT ACTIVATE AND SAYS THE SIM CARD IS NOT SUPPORTED I CHANGE FOR ANEW SIM ALREADY BUT STILL WONT ACTIVATE.PLEASE HELP
you're responding to a post that's almost 2 months old. Time to post your own thread.
-
please help...i live in nz and my itunes card wont work...ive tried and tried and it never works please help im really worried, if you could help that would be a huge relief! thanks...
Ask the people at the store the gift card came from or the iTunes Store staff for assistance.
(121383) -
Report painter details any one know please help me
please send me report painter material if any body have it
hi see this,
https://www.sdn.sap.com/irj/sdn/wiki
goto sdn wikis then type report painter then you get the docs.
reward points if useful,
regards,
venkat. -
i have been running of of ios 4 because ive not been able to update my phones or itubes.
now i have the new 5c and cant sync over any of my details off the computerHello John,
Congratulations on your new iPhone 5c! I am sure you are eager to sync information to your device.
First, I recommend reviewing the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Additionally, you will need the latest version of iTunes to sync with your new iPhone:
iTunes 11.1.3
http://www.apple.com/itunes/download/
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I am extremely desperate any one who can help me!
how do i do a flag or an alert on the server/system, so that when the user logs in they are notified that an email has been sent to them, and that they should check there inbox!
All messages sent to the user will be stored in a mysql database, does this improve or hinder my query?
All suggestions/solutions aill be gratefully appreciated!
ThanksYou question is a little vague... when you say "log in" are you referring to logging on to their workstation or logging on to a web application?
If it is the latter, this could be done when their logon is validated. If the logon is valid, then execute a query that checks for any messages that have not yet been viewed plus any other logic you want to add....
-Dave
Maybe you are looking for
-
Error on Loading Credit Management Setups using iSetup in target instance
Hi All, I am trying to migrate Oracle credit management functional setups(Scoring model, Checklist, Automation rules) from source instance to target instance. I am trying to achieve this by the usage of iSetup. Once the Load is done, I am gettin
-
MY ipod froze, restarted but will not load any music or delete old apps, any know how to fix this
My ipod froze so I restarted it. It loaded the apps but no music and did not delete old apps. Help!
-
I inserted the installation disc pressed restart and as the gong went I held C down until the apple log appeared in the middle.All that happened was the installation procedure came up and i had to press restart and keep the mouse pressed until the di
-
Warning message : Maintain the document in language German
Hi all, I want to release the customizing but there is a message "Maintain the document in language German" and then "Release of tasks without documentation is not allowed" What should i do ?? Thanks & Regards, Saiful arif
-
How to print a report in charachter mode in XP. In win 98 m/c it is working properly but on win XP m/c it always print character mode into graphic mode. Please help....