EXS samples missing

In particular: Funk Horn Section, but some others too. The folders containing the relevant samples are all empty. Any clues? Its the same on my MBP and my Mac Pro.
9.1.1, 2010 Mac Pro octocore, 8gig and i7 MBP 4gig.

Yes, I have them - both samples are in both folders:-
/Library/Application Support/Logic/EXS Factory Samples/05 Synthesizers/04 Sequence Elements/Spectrum Stack 01/UniSyncH.wav
and
/Library/Application Support/Logic/EXS Factory Samples/Analog Samples/Spectrum SQ/UniSyncH.wav
These are on the LP8 content disks but not on the LP9 content disks, strangely enough.
These will be only up for a short time as technically it's Apple content. I'm doing this to help you out as you're probably more than a little frustrated. Please post back when you have downloaded them.
http://dl.dropbox.com/u/4211158/soundies/logic/UniSyncH.wav
http://dl.dropbox.com/u/4211158/soundies/logic/UniSyncL.wav

Similar Messages

Missing EXS samples despite full install

I appear to be missing a few EXS samples for instrument channel strip settings such as all the Bosendorfer variations (Club, Hall, Room and Studio) and some of the Pop Strings amongst others. Most of the others are there but if I happen to click on a setting with missing samples Logic freezes for 20 or 30 seconds before warning me of the missing samples.
I have tried doing a complete reinstallation a few times but the samples are still not being installed. OSX won't let me install directly from the samples installer package within the Logic installer. Any idea why these are not being installed? I am selecting every single option in the Logic installer so it's not that.
Thanks
David

dmacintyre wrote:
They are in teh same channel strip folder as the Steinway and Yamaha settings. It's definitely Logic which is installing them as they reappear after deletion and reinstallation of the Logic content.
It could also be that you did not actually delete them before reinstall... ?
It couldn't be Garageband content could it? I am selecting the option to install Garageband content too but I wonder if it is part of the Garageband content which doesn't appear in the Logic installation files.
Garageband doesn't use channel strips. If they were just EXS instruments, it could be.
Also, after you reinstall, OS X needs some time to index all files. If you open *Activity Monitor*, order the processes by CPU use, and look if a background app called mdworker is active. Let it finish (= 0% activity) before you open Logic.
regards, Erik.

Why am I missing several EXS sample files?

I did a fresh install of both Leopard and the Logic Express 8 upgrade and now several presets in the Sound Library come up as sine waves if they are from EXS24 (Eighties Jump Brass, Crystal River, People On The Beach to name a few).
I did not install Garage Band/iLife '08 or the original Logic Express 7.2. Are those multisamples not included with the LE 8 upgrade? How do I get them?
This is extremely annoying...

I forgot to mention that when EXS is opened when any of these presets are selected, the Instrument display window where the preset is displayed in EXS shows "MISSING: xxxx" where xxxx is the preset name.

Logic Pro 9.1.6 string samples missing

I have purchased Logic Pro 9.1.6 from the App Store and downloaded all the additional content. But there are some samples missing, most of the string instruments in section "10 Orchestral -> Strings" and also in the Symphony Jam Pack the most of the String samples can't be found by the EXS.
I have downloaded and reinstalled the Symphony Orchestral Jam Pack as well as the 4,6gb additional sound files, but that didn't help.
There is also a problem when I try to load Organs from the Symphony Jam Pack. An error message pops up saying "Logic Pro: Plug-In „Pipe Organ“ not available!"
Any suggestions what I can do to fix the problem?
Best regards,
Andreas

I finally got the time to sit down and tackle the problem. This happened to me after a hard drive replacement by Apple. For whatever reason (and there seems to be many). Certain samples and instruments don't re-load under the later Logic Pro 9 updates. Here's how I fixed it. Brute force.
1. Download a freeware program called Pacifist. It allows you to extract contents from packages. Open the jampaks with the missing files (2 and 4 are the big ones with missing samples... 1 and 3 have a few).
2. This is tedious. Most missing instruments are from Jampak 2. Use pacifist to open Jampak 2 and copy the missing sample files back into HD=>Application Support=>Garage Band=>Instrument Library=>Sampler=>Sampler Files
3. Copy over the other jampaks as you see fit.
You can copy the entire contents or do like I did and replace the missing folders or patches. For some reason all the legato samples and the "RS" samples (articulations, i suppose) won't replace themselves EVEN IF YOU RE-INSTALL THE JAMPAKs in their entirety.
It ain't pretty, but it works. Good Luck!

Migrating EXS Samples. Logic 6.4 - 8

Hello.
I'm transferring my work from and old g4 powerbook to a new intel Macbook Pro.
I have a lot of unfinished projects on the Powerbook. What is the procedure for transferring my EXS library across?
If I copy the Sampler Instruments folder over, and the samples themselves, will Logic 8 find them? In fact I have no idea where Logic 8 stores samples for the EXS?
Just wondering if there is anything I need to know/watch out for...
thanks

Turns out I spoke too soon.
The EXS sampler cannot load the samples I have moved over. It says they are 'not found'. For example I have a drum breaks exs instrument that contains maybe 80 drum loops. When the sampler opens it says it can't find the files, but the name of them seems to have been changed. Random letters and numbers have been added. For example there is a drum break entitled
AfricanMusic_Machine_-Tropical.wav
But Logic says it can't find AfricanMusicMachineAEE36.wav
When I check the sample's name outside of logic it looks ok again.
Some of the samples load. But very few. If I go to the instrument editor the samples' names are present but they have an explanation mark next to them.
If I click on the exclamation mark and choose 'Open Audio File', I choose the correct file from my sample library but Logic says 'File name too long'.
Any help here would be much appreciated. Is there something I'm missing?
My move from a pb 1.5 to a MBP 2.4 has been totally plagued with problems (not just in Logic) and I'm beginning to wish I'd stayed with a G4 setup. The Trilogy and Atmosphere wrappers are pathetic (I am using them extensively in many an unfinished project)and I can't get Stylus to transfer over in my tracks either. The tracks are bare skeleton versions of what they were, nothing seems to be loading right.
It's all very frustrating.
Message was edited by: domchristian

Logic hangs when loading EXS samples on a session that worked yesterday?

I'm using Logic 8.0.2, I try to open session I was working on yesterday and it now won't open? it seems to not be able to find the EXS samples, as it hangs on the grey bars that show Logic trying to find the relevent samples. it takes forever to look and then eventually slips into 'logic not responding' when I look at the pre-force quit window.
This bug is making my life **** at the moment as I have very tight deadlines on picture work, it seems Logic 9 doesn't fix this as others have reported it so I don't want to use that until it's working without any bugs [ LOL! ]. I have 9 installed on a seperate drive when it's worthy of being used.
Been having this problem for at least 8 months now, I've tried 100's of times running disk utility, and preferential treatment I did try about 3 months ago running a spotlight utility but it didn't make any difference.
I have millions of samples spread on multiple drives, this has worked for me for years and years and only now has started to be a problem so 'moving your exs samples to a default area' is no use to me there must be another solution.
my system:
Logic Pro 8.0.2
OSX 10.5.8 [ 2x3.2 Ghz Quad-Core Intel Xeon ]
8GB memory
Powercore 3.2.0.38 [ for a powercore firewire ]
EuControl 2.0.3.63120 [ for a MC Mix ]
Motu PCI audio driver 1.31 [ for 24i/o, 2408, HD192 ]
hope someone can help.
I know there're other threads about this [ and it doesn't seem to be being fixed ], apple needs to realise the urgency of this problem.

I have 5 drives totalling about 2 TB of stuff which are my working non-application drives, when rebuilding spotlight index in Onyx the rebuilding takes about 5 seconds so I'm not sure that's actually doing anything at all?
this doesn't happen on every session I can normally re-open something but if it refuses to open I have to run disk utility and preferential treatment, restart and try again. this doesn't always work straight away, it can take like 3 x repeats of this / restarts until the session opens again which obviously is hugely disruptive with deadlines.
I heard that opening a session from 'within' Logic works better and I've been doing this but although it seems a little more reliable I'm still at the same point now where on average 1 in 4 sessions won't open and I have to go through the boring routine of disk utility, etc.

EXS' Sampler Instrument Count Limitation

Hello everyone,
Does anyone happen to know of a workaround/ solution to EXS' sampler instrument count limitation? I find myself constantly shuffling instruments and libraries in and out of the Sampler Instruments folder, a process which, given my 1TB library, is tedious and extremely time consuming.
Any "magic fixes" or insights would be highly appreciated..
Thanks!

Some clarifications:
I have been running EXS Manager, Pro Ed from the get-go.
Once again, my complaint is NOT regarding slow load times (which, believe me, is grounds for a whole separate post); rather the inability to access instruments altogether. In other words: past a certain, specific instrument down the list, others would simply no longer load. They are visible in the EXS menu, but are flat out "ignored" by the sampler.
Additionally, I have tried re arranging them using sub-folders, but to no avail: The Sampler Instruments folder seems to only be able to handle so many instruments.
Anyone else..?

Re-Linking EXS Sampler Instruments & Samples

1 - Curious what you think of this concept:
I have an external drive that I'd like to be able to move to several computers and use as my samples drive. To keep things consistent, I thought it best to keep BOTH EXS Sampler Instruments & Samples on this drive. Then I can just create aliases of the EXS Sampler Instruments and drop them in the main logic support folder. That way I can easily just move the drive to either computer for the greatest flexibility.
Is this ok to do? Is there a better way?
2 - I'd like to re-link many EXS Sampler Instruments to their samples. I used to use the ExsManager Pro.app but that stopped working a while back. Is there another way to have logic do all the re-linking instead?

revDAVE wrote:
I have an external drive that I'd like to be able to move to several computers and use as my samples drive. To keep things consistent, I thought it best to keep BOTH EXS Sampler Instruments & Samples on this drive. Then I can just create aliases of the EXS Sampler Instruments and drop them in the main logic support folder. That way I can easily just move the drive to either computer for the greatest flexibility.
Yes, you can do this.
2 - I'd like to re-link many EXS Sampler Instruments to their samples. I used to use the ExsManager Pro.app but that stopped working a while back. Is there another way to have logic do all the re-linking instead?
I highly suggest that you contact Redmatica and get an update to get it working again.

Exs sampler need looped sample to play forever

I have made an exs instrument of 2 separate 1 measure arpeggiated keyboard lines that I have set to loop in EXS sampler on MS2.
I have the EXS set to Mono, and to Unison so that one looped sample will cancel out the other one, I have now assigned 2 drum triggers on my midi drum kit
to each be the note that each of the 2 samples are assigned to. I have the release,sustain,decay cranked all the way on the EXS sampler, however, my samples still slowly die out. Is there a way for me to make them play forever until I play the other sample or hit panic button?
as long as I hold the note it will play forever, however I want to be able to hit a trigger that's assigned to that note, and have it simply loop forever

ù
Is loop in EXS24 editor flagged? I think here around is your solution
• Loop On checkbox: Activate to enable looping and to allow access to the other Loop parameters.
• Loop Start, Loop End fields: Define discrete loop start and end points, allowing you to loop a portion of the audio file.
• Control-clickeitherfieldtoopenashortcutmenuthatallowsaccesstotheLogicPro Sample Editor (or an external editor). This enables you to set the loop start and end points graphically: Loop Start is represented by the LS marker and Loop End by the LE marker. See Editing Samples in the EXS24 mkII Sample Editor.

EXS Sampler getting samples in?

Ive been chopping live drum audio files saving to desk top then into ESX.
Is there a better way?

revDAVE wrote:
I have an external drive that I'd like to be able to move to several computers and use as my samples drive. To keep things consistent, I thought it best to keep BOTH EXS Sampler Instruments & Samples on this drive. Then I can just create aliases of the EXS Sampler Instruments and drop them in the main logic support folder. That way I can easily just move the drive to either computer for the greatest flexibility.
Yes, you can do this.
2 - I'd like to re-link many EXS Sampler Instruments to their samples. I used to use the ExsManager Pro.app but that stopped working a while back. Is there another way to have logic do all the re-linking instead?
I highly suggest that you contact Redmatica and get an update to get it working again.

EXS samples in a partition disk

about puting the EXS samples in a partition disk instead of the system disk?, does it work better?, doesnt matter?

If you mean partitioning your main internal drive, and using that partition for your samples .... then, no, I wouldn't bother.
However, adding separate hard drive (SATA/FireWire 7200, etc) wouldn't hurt, and your samples may load faster, depending on your current configuration.

Where is the best place for EXS samples?

I finally upgraded from my G4 which had space issues. Now I'm wondering: Should EXS samples be on the boot drive or the media drive? How about Reason refill, RMX samples etc.?
Thanks in advance!

We know that the iPad only connects using wireless but don't know whether you plan to connect the iMac and/or the MacBook Pro using wireless as well.
If yes, the ideal spot for the Time Capsule would be a central location so that wireless devices would all be about the same distance from the Time Capsule.
Think of a wheel with a hub and spokes. The Time Capsule would be the "hub". Each wireless device would be located at end of a separate "spoke".
If that won't work, Apple does offer devcices like the AirPort Express and AirPort Extreme that can "extend" the wireless signal for greater coverage.

Moving EXS samples to separate drive

I purchased a firewire drive on which to store my EXS samples. I copied two folders to the new drive: EXS Factory Samples and Sampler Instruments. I then made aliases of these two folders and dropped them into the original folders on my MacBook's hard drive. So now when I attempt to choose a sample in the EXS, I see the alias and can choose a sound from it. Okee dokee. Works fine.
However, I didn't trash the original files from the computer's hard drive after I copied them to the new drive. Actually, I tried but was asked to "Authenticate" this decision. I assume that typing my password will allow me to trash the files, but I thought better of it and decided to ask here first. Is there a problem with trashing these files?
Thanks

hi,
after checking all files have been moved properly, yes you can delete the originals.
the reason you need to sign of on them is they are in the administrator domain, not the user.
DR9.

Samples missing from iBooks iPhone

Why are samples missing from pre-order books on iBooks for the iPhone? For example, Dot Complicated is currently a pre-order book. If you go to it from iBooks on the Mac or iPad, you can download a sample of the book. If you try the same thing from the iPhone, the Sample button is missing.

The Redmatica stuff sure is nice -- if you've got the dough. I'd recommend springing for the full Compendium Pro bundle though, if you're intent on using EXS24 as your primary sample-playback instrument. I've got Keymap and have barely used it over the past couple of years; but maybe next year I'll have more time to put into it.
http://redmatica.com/Redmatica/TheRedmaticaApplications.html

Can I put Logic Pro EXS samples on an SDXC card?

Can I put Logic Pro EXS samples on an SDXC card With my iMac? I was thinking the Apple loops as well.

My newest WD Caviar (Green also, any with 64MB cache) are noticeably faster - on any of the internal drive bays. The 500GB Black was slow compared to 640GB model.
But I often use a two drive stripe as well, using 10K VRs (450GB model is $200 ea for fast 900GB storage volume).
Mac Pro 2009, you have 5 internal spots for hard drives and much more convenient. I thought you were going to say you wanted to take your home folder with you, which does work just fine btw.
WD Black 2TB is also very fast - and cheaper than 10K VR 450.

EXS samples missing

Similar Messages

Maybe you are looking for